CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 61 to 80 of 366

_id 2a49
authors Asanowicz, Aleksander
year 1995
title Multimedia Versus Ugliness of the City
source Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 389-394
summary This paper presents a method of using multimedia techniques in order to solve problems of visual pollution of city environment. It is our observation that human - inducted degradation of city environmental results not only from neglect and vandalism but also from well - intentioned but inappropriate preservation actions by uninformed designers and local administrations. Very often, a local municipality administration permit to erect an ugly, bad-fitting surroundings houses. It is usually connected with lack of informations about certain areas of a city, its features, characteristic and about present and earlier buildings. Therefore there was an experiment - a complex programme aiding the decision process as a part of the CAMUS system (Computer Aided Management of Urban Structure) which is created at Faculty of Architecture TUB. One of the integral parts of it is a block, which has been called "How would it be like to be nice around". One of the basic elements of that system is a town data base consisting of the independent knowledge - based systems, working together in a distributed computing environment. City administration will have access to each information from multimedia data-base. Multimedia is also having and impact on the effectiveness of decision process in urban planning and in our fight with ugliness of the city.

series eCAADe
email asan@cksr.ac.bialystok.pl
more http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_46.htm
last changed 2003/11/21 14:16

_id e72e
authors Asaro, N., Corrao, R., Faconti, D., Fiandaca, O., Grifoni, P. and Silvani, A.
year 1995
title Riesce: An Hypertextual Tool for Browsing Information Produced in the Building Sector by PFEd
source Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 401-408
summary The structure of a set of documents allow for navigation inside single texts. Yet it is often also an obstacle to comparability between different parts and concepts. Even document formatting is only a partial answer to the problem, since it fails to develop the matter of relationships between enunciation and results. It was need to retrieve information about the scientific findings made by Research Units (Operating Units) during the first three year period of the "Progetto Finalizzato Edilizia" (PFEd) for assessment and transfer purposes which led us to design and develop a system to facilitate the retrieval of the relevant information. We chose the building sector for this application because of its relative lack of previous experience of this type, the variety and complexity of documentation available and, last but not least, the general underestimation of research topics and results vis-ŕ-vis the development of the sector. By making the suggestion and information inherent in its findings more available, in terms of method and ambit, as well as more explicit, the research has already achieved a significant result. In view of the prototype character of the experiment, the information will probably be adopted to produce an hypertext on the final results.

series eCAADe
more http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_48.htm
last changed 2003/11/21 14:16

_id 00ae
id 00ae
authors Ataman, Osman
year 1995
title Building A Computer Aid for Teaching Architectural Design Concepts
source Computing in Design - Enabling, Capturing and Sharing Ideas [ACADIA Conference Proceedings / ISBN 1-880250-04-7] University of Washington (Seattle, Washington / USA) October 19-22, 1995, pp. 187-208
summary Building an aid for teaching architectural design concepts is the process of elaborating topics, defining problems and suggesting to the students strategies for solving those problems. I believe students in Environment and Behavior (E&B) courses at Georgia Tech can benefit greatly from a computer based educational tool designed to provide them with experiences they currently do not possess. In particular, little time in the course (outside lectures) is devoted to applying concepts taught in the course to the studio projects. The tool I am proposing provides students with an opportunity to critique architectural environments (both simple examples and previous projects) using a single concept, "affordances". This paper describes my current progress toward realizing the goal of designing a tool that will help the students to understand particular concepts and to integrate them into their designs. It is my claim that an integrative and interactive approach - creating a learning environment and making both the students and the environment mutually supportive- is fundamentally more powerful than traditional educational methods.

series ACADIA
email oataman@uiuc.edu
last changed 2003/12/20 04:41

_id c777
authors Bach, Fr.-W., Rachkov, M., Seevers, J. and Hahn, M.
year 1995
title High tractive power wall-climbing robot
source Automation in Construction 4 (3) (1995) pp. 213-224
summary There are a lot of tasks in building construction and maintenance which demand either the carriage of heavy technological equipment along vertical and sloping surfaces and/or provision for force technological operations on such surfaces For example, surface cleaning or grinding by automatic equipment, the mounting of expansion bolts and anchors by drilling or by driving in. Additionally surface inspection by heavy measuring devices and the painting of big construction areas are difficult and expensive to perform manually. It is therefore expedient to apply climbing robots to automate these tractive power operations. The climbing robot was developed for such purposes. The design of the robot with increased load capacity and improved gripper system was carefully considered. The robot has a video camera for orientation and for the monitoring of processes. A sensor-based computer control system is used. This paper contains a brief overview of the technical parameters and experimental characteristics of the robot's transport module, control system with video camera unit, and the different schemes of the robot's application.
keywords Climbing robot; Two-staged gripper system Monitoring Sensor-based computer control system; Automatic Technological equipment
series journal paper
more http://www.elsevier.com/locate/autcon
last changed 2003/06/02 07:36

_id f8f0
authors Bakhtari, Shirin and Oertel, Wolfgang
year 1995
title DOM: An Active Assistance System for Architectural and Engineering Design
source Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 153-162
summary This article delineates an active design assistance system for conceptual design, called DOM which is the abbreviation for Domain Ontology Modelling. The intention of our work is to endorse the role of modelling a common and shared platform of design knowledge as well as to address the crucial task of representing design decisions and engineering judgements in order to evaluate design layouts and to support layout construction from scratch.The prerequisites and assumptions for an appropriate role of an active design assistance system are explained. The presented paper contains both a conceptual and a technical exploration of the DOM system.
keywords Design Ontology, Decision Making, Analysis, Synthesis
series CAAD Futures
last changed 2003/11/21 14:16

_id c3fa
authors Barnanente, A., Cuscito, A.P. and Maiellaro, N.
year 1995
title Expert System and Hypertext for Development Control
source Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 347-354
summary The paper deals with an interactive system based on expert system and hypertext interaction in order to meet the demands of support for local government officials' activity in building-application inspection. Also described are the planning departments context and the problem related to eliciting knowledge in building-inspection process.
series eCAADe
more http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_42.htm
last changed 2003/11/21 14:16

_id 30d7
authors Bartnicka, Malgorzata
year 1995
title Childishly Honest Associate of the Trickery
source CAD Space [Proceedings of the III International Conference Computer in Architectural Design] Bialystock 27-29 April 1995, pp. 209-219
summary Perspective is a method of presentation of 3- dimensional space on the 2-dimensional surface. It can only approximately express the complexity of the authentic perception of reality. During the centuries canons of presentation varied in different epochs. It is quite possible that conventions of presentation considered today as exact expressions of reality may seem for the future generations as untrue as the ancient Egypt paintings seem for us. Our mind plays the major role in all kinds of presentation. During the whole life we learn to perceive the surrounding reality. We have formed also ability to ,see" the perspective. The linear perspective is not so easy in perception without factors of colour and light. These factors play a very important role in perception of the distance. The perception of perspective is not always unmistakable. Introduction of light and shadow is one of the measures to limit the ambiguity. Objects shown in perspective with appropriately chosen colouring and light-and-shade effects reveal impression of the distance inside the flat picture. Illusions of perspective are most astonishing when one can assume deep-rooted expectations and suppositions of the addressee. The computer monitor, like the picture, has only one plane on which our project can be presented. The major feature of architecture programs is both the possibility of creating various architecture spaces and the possibility to examine how (in our opinion) the created space would affect the addressee. By means of computer programs we are able to generate drawings and objects of two kinds: first - being the ideal projection of reality (at least in the same measure as the photograph), and the second - being the total negation of perspective rules. By means of CAD programs enabling 3-dimensional job we can check how all sorts of perspective tricks and artifices affect our imagination. The program cooperates with us trying to cheat the imperfect sense of sight. The trickeries can be of various type, starting from play of lights, through the elements changing the perception of perspective, and terminating with objects totally negating the rules of sound construction of solids. The knowledge contained in these programs is an encyclopaedic recapitulation of all sorts of achievements in the field of perspective and application of colour and light effects. All that remains to the users is to exploit this tremendous variety of capabilities.
series plCAD
last changed 2000/01/24 09:08

_id ddssar0206
id ddssar0206
authors Bax, M.F.Th. and Trum, H.M.G.J.
year 2002
title Faculties of Architecture
source Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary In order to be inscribed in the European Architect’s register the study program leading to the diploma ‘Architect’ has to meet the criteria of the EC Architect’s Directive (1985). The criteria are enumerated in 11 principles of Article 3 of the Directive. The Advisory Committee, established by the European Council got the task to examine such diplomas in the case some doubts are raised by other Member States. To carry out this task a matrix was designed, as an independent interpreting framework that mediates between the principles of Article 3 and the actual study program of a faculty. Such a tool was needed because of inconsistencies in the list of principles, differences between linguistic versions ofthe Directive, and quantification problems with time, devoted to the principles in the study programs. The core of the matrix, its headings, is a categorisation of the principles on a higher level of abstractionin the form of a taxonomy of domains and corresponding concepts. Filling in the matrix means that each study element of the study programs is analysed according to their content in terms of domains; thesummation of study time devoted to the various domains results in a so-called ‘profile of a faculty’. Judgement of that profile takes place by committee of peers. The domains of the taxonomy are intrinsically the same as the concepts and categories, needed for the description of an architectural design object: the faculties of architecture. This correspondence relates the taxonomy to the field of design theory and philosophy. The taxonomy is an application of Domain theory. This theory,developed by the authors since 1977, takes as a view that the architectural object only can be described fully as an integration of all types of domains. The theory supports the idea of a participatory andinterdisciplinary approach to design, which proved to be awarding both from a scientific and a social point of view. All types of domains have in common that they are measured in three dimensions: form, function and process, connecting the material aspects of the object with its social and proceduralaspects. In the taxonomy the function dimension is emphasised. It will be argued in the paper that the taxonomy is a categorisation following the pragmatistic philosophy of Charles Sanders Peirce. It will bedemonstrated as well that the taxonomy is easy to handle by giving examples of its application in various countries in the last 5 years. The taxonomy proved to be an adequate tool for judgement ofstudy programs and their subsequent improvement, as constituted by the faculties of a Faculty of Architecture. The matrix is described as the result of theoretical reflection and practical application of a matrix, already in use since 1995. The major improvement of the matrix is its direct connection with Peirce’s universal categories and the self-explanatory character of its structure. The connection with Peirce’s categories gave the matrix a more universal character, which enables application in other fieldswhere the term ‘architecture’ is used as a metaphor for artefacts.
series DDSS
last changed 2003/11/21 14:16

_id 85bd
id 85bd
authors Bax, M.F.Th.
year 1995
title FROM IDEOLOGY TO METHODOLOGY: THE THEORETICAL EVOLUTION OF THE DESIGN METHODS GROUP
source Oxman, R.M., Bax, M.F.Th., Achten, H.H. (eds.) Design research in the Netherlands, 89-94
series book
type normal paper
email H.H.Achten@tue.nl
more http://www.designresearch.nl/PDF/DRN1995_Bax.pdf
last changed 2005/10/12 13:16

_id 92fa
authors Baxendale, T. and Alshawi, M.
year 1995
title Information systems development for contracting
source Automation in Construction 4 (3) (1995) pp. 255-256
summary I have read with interest the paper entitled "Information systems development for contract-ing" that was published in Automation in Construction, Vol. 2, No. 4. The author has explained the basic concepts of DFD within the context of structured methodologies, which in turn high-lights the importance of information analysis prior to systems development. However, I would like to make a few comments some of which are related to the contents of the paper while others are complementary.
series journal paper
more http://www.elsevier.com/locate/autcon
last changed 2003/05/15 12:44

_id 065b
authors Beitia, S.S., Zulueta, A. and Barrallo, J.
year 1995
title The Virtual Cathedral - An Essay about CAAD, History and Structure
source Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 355-360
summary The Old Cathedral of Santa Maria in Vitoria is the most representative building of the Gothic style in the Basque Country. Built during the XIV century, it has been closed to the cult in 1994 because of the high risk of collapse that presents its structure. This closure was originated by the structural analysis that was entrusted to the University of the Basque Country in 1992. The topographic works developed in the Cathedral to elaborate the planimetry of the temple revealed that many structural elements of great importance like arches, buttresses and flying buttresses were removed, modified or added along the history of Santa Maria. The first structural analysis made in the church suggested that the huge deformations showed in the resistant elements, specially the piers, were originated by interventions made in the past. A deep historical investigation allowed us to know how the Cathedral was built and the changes executed until our days. With this information, we started the elaboration of a virtual model of the Cathedral of Santa Maria. This model was introduced into a Finite Elements Method system to study the deformations suffered in the church during its construction in the XIV century, and the intervention made later in the XV, XVI and XX centuries. The efficiency of the virtual model simulating the geometry of the Cathedral along history allowed us to detect the cause of the structural damage, that was finally found in many unfortunate interventions along time.

series eCAADe
more http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_43.htm
last changed 2003/11/21 14:16

_id c2bd
authors Belblidia, Salim and Perrin, Jean-Pierre
year 1995
title Multi-Resolution Rendering of Architectural Models
source Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 231-239
summary This paper presents a method for representing complex models with various levels of detail. It is based on a geometric simplification algorithm and is applied to a scene described by a rooted-tree structure. In order to control the restuting image quality and the computation time, we propose two algorithms which allow to choose one representation of the scene.
keywords Computer Graphics, Image Synthesis, Realistic Rendering, Real-Time Rendering, Computer Aided Architectural Design
series CAAD Futures
email belblidia@crai.archi.fr
last changed 2003/11/21 14:16

_id cb18
authors Belibani, R., Gadola, A. and Marinelli, A.
year 1995
title Hypervisible Cities: Seville, Barcelona, Lisbon
source Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 161-168
summary The Hypertext 'HYPERVISIBLE CITIES: SEVILLE, BARCELONA, LISBON" was realised within the interuniversity scientific research "La Prodazione dei circuiti multimediali didattici per l'architettura e l'urbanisticai (The production of multimedia didactic circuits for architecture and urban planning), co-ordinator Prof Paola Coppola Pignatelli - Dipartimento di Progettozione Architettonica e Urbana - Facolta di Architettura, Universita "La Sapienza", Roma, Italia. The aim of the research is the representation through the hypermedia tool of the significant of the cities, perceived through their images. The hypertext it has been attempted to make hypervisible three major cities - Seville, Barcelona, Lisbon - through a horizontal/vertical reading, according to three directions of probing, for comparisons purposes among different methods of growth of the city form.
series eCAADe
more http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_21.htm
last changed 2003/11/21 14:16

_id c19c
authors Beliveau, Y.J.
year 1996
title What can real-time positioning do for construction?
source Automation in Construction 5 (2) (1996) pp. 79-89
summary New technologies are now available that can rapidly measure three-dimensional coordinates of objects. The integration of these fast 3-D Real-time Position Measurement (D-RtPM) devices and CAD (3D-RtPM/CAD) technologies can be viewed as a better tool for surveyors or as a means to change the most fundamental concepts of the construction industry. 3D-RtPM/CAD is a better surveying tool; however, 3D-RtPM/CAD as the basis for fundamental change within the construction industry is the issue. There are several potential technologies that can provide real-time position measurement. This paper will limit presentation to two of these. The first is based on recent developments in Global Positioning Systems. The second is a new laser-based product, OdysseyTM (Odyssey is a trademark of Spatial Positioning Systems, Inc.). Odyssey received the NOVA award in March, 1995 because of its recognized performance enhancement to the construction industry. These positioning systems provide the capability for equipment and crafts people to view the project from a graphical representation in which they see their position interactively updated. Potential benefits to the construction industry are presented. The research needed achieving maximum benefits of these systems is also presented.
series journal paper
more http://www.elsevier.com/locate/autcon
last changed 2003/05/15 19:22

_id sigradi2008_049
id sigradi2008_049
authors Benamy, Turkienicz ; Beck Mateus, Mayer Rosirene
year 2008
title Computing And Manipulation In Design - A Pedagogical Experience Using Symmetry
source SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary The concept of symmetry has been usually restricted to bilateral symmetry, though in an extended sense it refers to any isometric transformation that maintains a certain shape invariant. Groups of operations such as translation, rotation, reflection and combinations of these originate patterns classified by modern mathematics as point groups, friezes and wallpapers (March and Steadman, 1974). This extended notion represents a tool for the recognition and reproduction of patterns, a primal aspect of the perception, comprehension and description of everything that we see. Another aspect of this process is the perception of shapes, primary and emergent. Primary shapes are the ones explicitly represented and emergent shapes are the ones implicit in the others (Gero and Yan, 1994). Some groups of shapes known as Semantic Shapes are especially meaningful in architecture, expressing visual features so as symmetry, rhythm, movement and balance. The extended understanding of the concept of symmetry might improve the development of cognitive abilities concerning the creation, recognition and meaning of forms and shapes, aspects of visual reasoning involved in the design process. This paper discusses the development of a pedagogical experience concerned with the application of the concept of symmetry in the creative generation of forms using computational tools and manipulation. The experience has been carried out since 1995 with 3rd year architectural design students. For the exploration of compositions based on symmetry operations with computational support we followed a method developed by Celani (2003) comprising the automatic generation and update of symmetry patterns using AutoCAD. The exercises with computational support were combined with other different exercises in each semester. The first approach combined the creation of two-dimensional patterns to their application and to their modeling into three-dimensions. The second approach combined the work with computational support with work with physical models and mirrors and the analysis of the created patterns. And the third approach combined the computational tasks with work with two-dimensional physical shapes and mirrors. The student’s work was analyzed under aspects such as Discretion/ Continuity –the creation of isolated groups of shapes or continuous overlapped patterns; Generation of Meta-Shapes –the emergence of new shapes from the geometrical relation between the generative shape and the structure of the symmetrical arrangement; Modes of Representation –the visual aspects of the generative shape such as color and shading; Visual Reasoning –the derivation of 3D compositions from 2D patterns by their progressive analysis and recognition; Conscious Interaction –the simultaneous creation and analysis of symmetry compositions, whether with computational support or with physical shapes and mirrors. The combined work with computational support and with physical models and mirrors enhanced the students understanding on the extended concept of symmetry. The conscious creation and analysis of the patterns also stimulated the student’s understanding over the different semantic possibilities involved in the exploration of forms and shapes in two or three dimensions. The method allowed the development of both syntactic and semantic aspects of visual reasoning, enhancing the students’ visual repertoire. This constitutes an important strategy in the building of the cognitive abilities used in the architectural design process.
keywords Symmetry, Cognition, Computing, Visual reasoning, Design teaching
series SIGRADI
email mateusbeck@pop.com.br
last changed 2016/03/10 08:47

_id aab6
authors Bermudez, Julio
year 1995
title Designing Architectural Experiences: Using Computers to Construct Temporal 3D Narratives
source Computing in Design - Enabling, Capturing and Sharing Ideas [ACADIA Conference Proceedings / ISBN 1-880250-04-7] University of Washington (Seattle, Washington / USA) October 19-22, 1995, pp. 139-149
summary Computers are launching us into a representational revolution that fundamentally challenges the way we have hitherto conceived and practiced architecture. This paper will explore one of its fronts: the simulation of architectural experiences. Today's off-the-shelf softwares (e.g. 3D modeling, animations, multimedia) allow us for first time in history to depict and thus approach architectural design and criticism truly experientially. What is so appealing about this is the possibility of shifting our attention from the object to the experience of the object and in so doing reconceptualizing architectural design as the design of architectural experiences. Carrying forward such a phenomenological proposition requires us to know (1) how to work with non-traditional and 'quasi-immersive' (or subject-centered) representational systems, and (2) how to construct temporal assemblages of experiential events that unfold not unlike 'architectural stories'. As our discipline lacks enough knowledge on this area, importing models from other fields appears as an appropriate starting point. In this sense, the narrative arts (especially those involved with the temporal representation of audio-visual narratives) offer us the best insights. For example, principles of cinema and storytelling give us an excellent guidance for designing architectural experiences that have a structuring theme (parti), a plot (order), unfolding episodes (rhythm), and special events (details). Approaching architecture as a temporal 3D narrative does transform the design process and, consequently, its results. For instance, (1) phenomenological issues enter the decision making process in an equal footing to functional, technological, or compositional considerations; (2) orthographic representations become secondary sources of information, mostly used for later accurate dimensioning or geometrization; (3) multi-sensory qualities beyond sight are seriously considered (particularly sound, texture, and kinesthetic); etc.
series ACADIA
email bermudez@arch.utah.edu
last changed 2003/11/21 14:16

_id d7eb
authors Bharwani, Seraj
year 1996
title The MIT Design Studio of the Future: Virtual Design Review Video Program
source Proceedings of ACM CSCW'96 Conference on Computer-Supported Cooperative Work 1996 p.10
summary The MIT Design Studio of the Future is an interdisciplinary effort to focus on geographically distributed electronic design and work group collaboration issues. The physical elements of this virtual studio comprise networked computer and videoconferencing connections among electronic design studios at MIT in Civil and Environmental Engineering, Architecture and Planning, Mechanical Engineering, the Lab for Computer Science, and the Rapid Prototyping Lab, with WAN and other electronic connections to industry partners and sponsors to take advantage of non-local expertise and to introduce real design and construction and manufacturing problems into the equation. This prototype collaborative design network is known as StudioNet. The project is looking at aspects of the design process to determine how advanced technologies impact the process. The first experiment within the electronic studio setting was the "virtual design review", wherein jurors for the final design review were located in geographically distributed sites. The video captures the results of that project, as does a paper recently published in the journal Architectural Research Quarterly (Cambridge, UK; Vol. 1, No. 2; Dec. 1995).
series other
last changed 2002/07/07 14:01

_id c6bb
authors Bottelli, Valeria and Fogh, Christian
year 1995
title Galathea: A Case-Based Planning Tool for Knowledge Navigation in the Architectural Design Process
source Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 427-436
summary We report on an on-going Ph.D. research aimed at the analysis of the nature of process knowledge in architectural design and the development of a conceptual model for a case-based navigation tool for its support. We describe architectural design from a process viewpoint and assume it as a form of intentional planning, leading from an initial state configuration toward a desired situation, by means of an incremental specification of goals, constraints and involved variables. We consider the very essence of design and of the specific professional skill characterising designers as the continual recursive transformation of the initial solution model, in order to map the desired state onto the enacted one and the capability to govern a number of continually changing variables in this direction. On the basis of this general concept of the design process, we describe the model of Galathea, a case-based planning tool, aimed at progressively representing the enlarging space of acquired knowledge, and at supporting the designer´s central role in the management of the design process.
series eCAADe
more http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_50.htm
last changed 2003/11/21 14:16

_id ae10
authors Branzell, Arne
year 1995
title Management of Sequential Space Experiences
source The Future of Endoscopy [Proceedings of the 2nd European Architectural Endoscopy Association Conference / ISBN 3-85437-114-4]
summary In this paper a way of combining endoscopy with architectural notations will be presented. Endoscopy is regarded as a tool to visualize sequences from a model in order to demonstrate how the environment will look like from the pedestrian’s or driver’s view. But while using it, its limitations must be considered. The model is mostly too small to present distant landmarks, districts, nodes and edges of importance. And most important, experience of space is not only visual. It is a complex process where many aspects must be taken into consideration. These aspects can be presented with architectural notations on physical drawings of the situation. The resulting “storyboard” is most useful in analyzing the situation and making better solutions possible.
keywords Architectural Endoscopy, Real Environments
series EAEA
more http://info.tuwien.ac.at/eaea/
last changed 2005/09/09 08:43

_id 653a
id 653a
authors Brazier, F. and Treur, J.
year 1995
title DESIGN RESEARCH: EMPIRICAL, FOUNDATIONAL AND DEVELOPMENTAL PERSPECTIVES
source Oxman, R.M., Bax, M.F.Th., Achten, H.H. (eds.) Design research in the Netherlands, 141-149
series book
type normal paper
email H.H.Achten@tue.nl
more http://www.designresearch.nl/PDF/DRN1995_Brazier_Treur.pdf
last changed 2005/10/12 13:21

For more results click below:

show page 0show page 1show page 2this is page 3show page 4show page 5show page 6show page 7show page 8... show page 18HOMELOGIN (you are user _anon_494387 from group guest) CUMINCAD Papers Powered by SciX Open Publishing Services 1.002