CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 714

_id f9d8
authors De Valpine, John and Black, Benjamin
year 2001
title Physically Based Daylight Simulation and Visualization
source Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 406-407
summary While architects typically agree that daylight is a powerful influence for design, architects rarely collect and use daylighting data to help make informed design decisions. This deficiency exists partially because there are no common tools available to provide useful and accessible data. The objective of this project is to provide accurate daylighting data of a prominent urban building site and present it in a clear way so that the architects can make well informed design decisions that respond to site daylighting conditions and improve architectural performance. An urban 3D computer model was created with AutoCad, a commercial CAD application. Daylight was simulated with Radiance, the physically based rendering engine developed at Lawrence Berkeley National Laboratory. The standard CIE model for clear sky and sun was used to produce over 500 images that represent daylight conditions for three different times of year at 10 minute intervals in both luminance and illuminance formats. The simulation data was packaged for analysis with a unique browser tool that enables the architect to easily cycle through the data to evaluate and compare behavior by time of day and by season. The architect can also toggle between luminance and illuminance format to easily visualize both qualitative and quantitative data. The exploration and use of the simulation data can be applied with sensitivity to inform the design and decision making process for the exterior building site.
series ACADIA
last changed 2002/04/25 17:30

_id 0bef
authors Ataman, Osman and Wingert, Kate
year 2001
title DEVELOPING AN INTERACTIVE URBAN MODEL PROTOTYPE
source SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 300-303
summary The application of new digital media provides a methodology for reconstructing and analyzing certain architectural elements from the past. In this paper, a research project is described to develop a prototype system to represent and manipulate information in urban settings. In general, our research is aimed at developing a prototype urban database model and Philadelphia is chosen as a case study. An emphasis is placed on identification, categorization and representation of information in a way that is useful for urban researchers for analysis.
series SIGRADI
email ataman@uiuc.edu
last changed 2016/03/10 08:47

_id cf2011_p127
id cf2011_p127
authors Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year 2011
title Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called “gingerbread houses”, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series CAAD Futures
email deborahbenros@gmail.com
last changed 2012/02/11 18:21

_id cf2011_p051
id cf2011_p051
authors Cote, Pierre; Mohamed-Ahmed Ashraf, Tremblay Sebastien
year 2011
title A Quantitative Method to Compare the Impact of Design Mediums on the Architectural Ideation Process.
source Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 539-556.
summary If we compare the architectural design process to a black box system, we can assume that we now know quite well both inputs and outputs of the system. Indeed, everything about the early project either feasibility studies, programming, context integration, site analysis (urban, rural or natural), as well as the integration of participants in a collaborative process can all be considered to initiate and sustain the architectural design and ideation process. Similarly, outputs from that process are also, and to some extent, well known and identifiable. We are referring here, among others, to the project representations or even to the concrete building construction and its post-evaluation. But what about the black box itself that produces the ideation. This is the question that attempts to answer the research. Currently, very few research works linger to identify how the human brain accomplishes those tasks; how to identify the cognitive functions that are playing this role; to what extent they operate and complement each other, and among other things, whether there possibly a chain of causality between these functions. Therefore, this study proposes to define a model that reflects the activity of the black box based on the cognitive activity of the human brain. From an extensive literature review, two cognitive functions have been identified and are investigated to account for some of the complex cognitive activity that occurs during a design process, namely the mental workload and mental imagery. These two variables are measured quantitatively in the context of real design task. Essentially, the mental load is measured using a Bakan's test and the mental imagery with eyes tracking. The statistical software G-Power was used to identify the necessary subject number to obtain for significant variance and correlation result analysis. Thus, in the context of an exploratory research, to ensure effective sample of 0.25 and a statistical power of 0.80, 32 participants are needed. All these participants are students from 3rd, 4th or 5th grade in architecture. They are also very familiar with the architectural design process and the design mediums used, i.e., analog model, freehand drawing and CAD software, SketchUp. In three experimental sessions, participants were asked to design three different projects, namely, a bus shelter, a recycling station and a public toilet. These projects were selected and defined for their complexity similarity, taking into account the available time of 22 minutes, using all three mediums of design, and this in a randomly manner to avoid the order effect. To analyze the two cognitive functions (mental load and mental imagery), two instruments are used. Mental imagery is measured using eye movement tracking with monitoring and quantitative analysis of scan paths and the resulting number and duration of participant eye fixations (Johansson et al, 2005). The mental workload is measured using the performance of a modality hearing secondary task inspired by Bakan'sworks (Bakan et al.; 1963). Each of these three experimental sessions, lasting 90 minutes, was composed of two phases: 1. After calibrating the glasses for eye movement, the subject had to exercise freely for 3 minutes while wearing the glasses and headphones (Bakan task) to get use to the wearing hardware. Then, after reading the guidelines and criteria for the design project (± 5 minutes), he had 22 minutes to execute the design task on a drawing table allowing an upright posture. Once the task is completed, the subject had to take the NASA TLX Test, on the assessment of mental load (± 5 minutes) and a written post-experimental questionnaire on his impressions of the experiment (± 10 minutes). 2. After a break of 5-10 minutes, the participant answered a psychometric test, which is different for each session. These tests (± 20 minutes) are administered in the same order to each participant. Thus, in the first experimental session, the subject had to take the psychometric test from Ekstrom et al. (1978), on spatial performance (Factor-Referenced Cognitive Tests Kit). During the second session, the cognitive style is evaluated using Oltman's test (1971). Finally, in the third and final session, participant creativity is evaluated using Delis-Kaplan test (D-KEFS), Delis et al. (2001). Thus, this study will present the first results of quantitative measures to establish and validate the proposed model. Furthermore, the paper will also discuss the relevance of the proposed approach, considering that currently teaching of ideation in ours schools of architecture in North America is essentially done in a holistic manner through the architectural project.
keywords design, ideation process, mental workload, mental imagery, quantitative mesure
series CAAD Futures
email pierre.cote@arc.ulaval.ca
last changed 2012/02/11 18:21

_id ddss9829
id ddss9829
authors De Hoog, J., Hendriks, N.A. and Rutten, P.G.S.
year 1998
title Evaluating Office Buildings with MOLCA(Model for Office Life Cycle Assessment)
source Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary MOLCA (Model for Office Life Cycle Assessment) is a project that aims to develop a tool that enables designers and builders to evaluate the environmental impact of their designs (of office buildings) from a environmental point of view. The model used is based on guidelinesgiven by ISO 14000, using the so-called Life Cycle Assessment (LCA) method. The MOLCA project started in 1997 and will be finished in 2001 resulting in the aforementioned tool. MOLCA is a module within broader research conducted at the Eindhoven University of Technology aiming to reduce design risks to a minimum in the early design stages.Since the MOLCA project started two major case-studies have been carried out. One into the difference in environmental load caused by using concrete and steel roof systems respectively and the role of recycling. The second study focused on biases in LCA data and how to handle them. For the simulations a computer-model named SimaPro was used, using the world-wide accepted method developed by CML (Centre for the Environment, Leiden, the Netherlands). With this model different life-cycle scenarios were studied and evaluated. Based on those two case studies and a third one into an office area, a first model has been developed.Bottle-neck in this field of study is estimating average recycling and re-use percentages of the total flow of material waste in the building sector and collecting reliable process data. Another problem within LCA studies is estimating the reliability of the input data and modelling uncertainties. All these topics will be subject of further analysis.
keywords Life-Cycle Assessment, Office Buildings, Uncertainties in LCA
series DDSS
last changed 2003/08/07 14:36

_id d146
authors He, Jie
year 2001
title CAD Study in Visual Analysis of the Visual Sustainability for China Urban Natural Landscape Planning
source Chinese University of Hong Kong
summary In this thesis a GIS-based CAD system prototype of evaluating visual quality of urban natural landscape environment is presented. This prototype is an indispensable component of the integrative Visual Sustainability research, and offers a calculable and visualizable technique to urban visual natural landscape assessment. This scientific method provides precise data to estimate the visibility of natural landscape in urban construction actuality. Furthermore, it can also work out supporting information for maintaining and protecting valuable visual landscape resources in further planning. Introduction of this methodology intends to improve the natural landscape cooperation in China urban planning through visual protection. Combining with popular CAD software such as AutoCAD and Microstation, the research team uses ArcView GIS software and its 3D Analyst extension to accomplish a set of research procedure, which includes data modification, model making, viewshed and view sensibility analysis. In addition, this system can create simultaneous 3D scenes or hire other information media as reference tools for professional analysis, design consultation and intercommunication. The core technologies of this proposed system are viewshed calculation and overlay analysis. In viewshed analysis, human visual characteristics are simulated by a series of ergonomics parameters of viewpoints. Viewshed of each viewpoint can be calculated into vector data and mapped by polygons identifying which region is visible and which is not. Overlay function of the proposed system is used in visual sensibility analysis to achieve the division of higher visual sensible area which indicates the common visible area from different viewpoints. Additionally, viewshed maps and visual sensibility results can add more information to mark out the areas that can satisfy certain visual parameters such as appropriate visual angle or visual distance. These overlaying results can visualized the visible areas into hierarchical visual perception quality categories in order to define the visual landscape significance of particular planning regions. A case study was operated to evaluate this system. The case is in Zhongshan city, Guangdong Province of China. Jinzishan hill region is the study site that picked by collaborating discussion of research team and the local government. It is located on the edge of urban built-up area. Jinzishan massif is the prominent landscape element of the surrounding environment. There are three topics in Jinzishan visual perception in this paper. The first topic is the visual quality evaluation of the intersections of its surrounding road system. The second is the integrated visual perception of two main roads called Qiwandao and Bo’ailu. Finally is the analysis of the hill skyline visual quality in surrounding area. The analysis results in GIS vector data can be converted into popular data format and combined with other spatial information for practical application. And comments for future urban planning are collected and analyzed by professional responses to the computer-generated information investigation.
keywords Natural Landscaping; Computer-Aided Design; Landscape Architecture; City Planning; Geographic Information Systems
series thesis:MSc
email hejie@cuhk.edu.hk
last changed 2003/02/12 21:37

_id 2005_695
id 2005_695
authors Kouzeleas, Stelios Th.
year 2005
title Definition of a Method of Limits of the Simplification of a Hall Model in a CAD System to Diminish Falsification of Acoustic Simulation Results
source Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 695-704
summary During the modelling, because of the sometimes complex architectural shape of halls, we were forced to introduce simplifications in order to carry out calculations and simulation operations on these halls, as the calculation software requires plane surfaces. This paper presents a developed tool adapted on a CAD modelling system (AutoCAD), which defines an “average limits” of the model simplification operation in order to control and diminish the falsification of calculation and simulation results on this model, such as the architectural acoustic simulation. The process of the elaboration and the adjustment of the simplified models of the Grand Theatre of Bordeaux (GTB) based on acoustical measurements and their calculation results are described in detail in a previous article (Kouzeleas and Semidor, 2001). The analysis process of the consequences of the hall model simplification on the acoustical simulation results and the applied simplification methods are described in a PhD thesis (Kouzeleas, 2002). This article is based on this analysis process in order to apply it on several simplified models of the Amphitheatre of the Architecture School of Bordeaux (Amphi- EAPB). The comparison in a CAD system (AutoCAD) of the acoustical calculation results and the areas after simplification of the simplified models of these two halls made with AutoCAD, via the developed tool adapted on the AutoCAD, permit to define a “limits average of a hall model simplification” before the falsification of these calculation results.
keywords Calculation Cad Program Integrated Development ; Design Process ; 3D Modeling ; Performance Simulation ; Acoustic Simulation Results
series eCAADe
email stelios_kouzeleas@yahoo.fr
last changed 2012/11/23 18:17

_id 470c
authors Kuenstle, Michael W.
year 2001
title COMPUTATIONAL FLUID DYNAMIC APPLICATIONS IN WIND ENGINEERING FOR THE DESIGN OF BUILDING STRUCTURES IN WIND HAZARD PRONE AREAS (Computational Flow Dynamic Applications in Wind Engineering for the Design of Building Structures in Wind Hazard Prone Urban Areas)
source SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 67-70
summary This paper documents an initial study investigating the integration of Computational Fluid Dynamics (CFD) simulation modeling into wind mitigation design for building structures located in wind hazard prone areas. Some of the basic principles and theoretical concepts of fluid flow and wind pressure as well as their translation into design criteria for structural analysis and design are reviewed, followed by a discussion of a CFD application case study for a simulated hurricane force wind flow over a low rectangular building using the k-epsilon turbulence model. The techniques and parameters for development of the simulation are discussed and some preliminary interpretations of the results are evaluated by comparing its predictions against existing experimental and analytical data, with special attention paid to the American Society of Civil Engineers, Minimum Design Loads for Buildings and Other Structures, ACSE 7-98 and the Uniform Building Code .
series SIGRADI
email kuenstle@ufl.edu
last changed 2016/03/10 08:54

_id d00c
authors Kós, José Ripper
year 2001
title Modeling the City History
source Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 436-441
summary This paper explores the idea that 3D city models integrated with hypermedia systems can facilitate the sense of belonging to a place. 3D models are powerful tools for buildings and urban space analysis as artifacts, which synthesize men’s reality and aspirations. As such, combined with hypermedia resources, they can strengthen the spectator’s actual experience in the analyzed space. The focus of the investigation is 3D models constructed to represent and analyze city evolution. The experience of developing the models of Latin American cities – Rio de Janeiro, Brazil and Havana, Cuba – developed at PROURB (Faculty of Architecture and Urbanism, Federal University of Rio de Janeiro) is explained with an overview of its methodology.
keywords 3D City Model, Hypermedia, Sense Of Place, City Evolution, Latin America
series eCAADe
email josekos@ufrj.br
last changed 2001/08/06 20:38

_id 7655
authors Okeil, Ahmad and El Araby, Mostafa
year 2003
title Realism vs. Reality in Digital Reconstruction of Cities
source CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary The digital reconstruction of existing cities using virtual reality techniques is being increasingly used. For consultants, municipalities and planning departments these models provide decision support through visual simulations (El Araby, 2001). For academia they provide a new tool for teaching students urban design and planning (Okeil, 2001). For authorities they provide a tool for promoting the city on the world wide web trying to attract more businesses and tourists to it. The built environment is very rich in detail. It does not only consist of open spaces surrounded by abstract buildings but it also includes many smaller objects such as street furniture, traffic signs, street lights, different types of vegetation and shop signs for example. All surfaces in the built environment have unique properties describing color, texture and opacity. The built environmentis dynamic and our perception is affected by factors such as pedestrian movement, traffic, environmental factors such as wind, noise and shadows. The built environment is also shaped by the accumulation of changes caused by many influences through time. All these factors make the reconstruction of the built environment a very complex task. This paper tries to answer the question: how realistic the reconstructed models of urban areas can be. It sees “Realism“ as a variable floating between three types of realties. The reality of the physical environment which we are trying to represent. The reality of the digital environment which will host the digitally reconstructed city. And the reality of the working environment which deals with the problem of limitation of resources needed to digitally reconstruct the city. A case study of building a 3D computer model of an urban area in the United Arab Emirates demonstrates that new time-saving techniques for data acquisition can enhance realism by meetingbudget limitations and time limitations.
keywords Virtual Reality; Photo Realism; Texture Maps; 3D Modeling; Urban Design
series other
email a.okeil@uaeu.ac.ae
last changed 2003/03/11 19:39

_id 4112
authors Raposo, M., Sampio, M. and Raposo, P.
year 2001
title A City Simulator
source Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 052-061
summary This paper presents a new computer model for city skyline simulation. It works by shaping medium and high-rise buildings to their best performance. This new tool was conceived to simulate and analyze cities where tall buildings are emerging on pre-existing urban schemes with irregular geometry and where inter-building spacing is proportional to the height of built blocks. The model is based on two main inputs, namely: the description of the network formed by land subdivision of the actual or irregular urban schemes, and the building regulations quantitative parameters based on solar obstruction angles and maximum usability rates. By combining data from these inputs, the computer model presents the dimensions of the building envelop for maximum profitability of each plot. That way the architect will immediately know the number of floors that leads to the maximum built area, for certain plots. In addition to this, the built blocks images are presented in the screen, as well as corresponding tables and Cartesian graphs. Furthermore, this model can also be used for analyzing city skyline for large urban areas. This analysis can range from a mere visual inspection of the variety of images built blocks will take under different legal constraints, to a more intricate analysis of how city skyline and built area, amongst others, are affected by different the regulations.
keywords Computing City Shape, Land use performance, Computing city skyline, Urban network design, Computing City Architecture.
series ACADIA
email arq@recife.softex.br
last changed 2002/04/25 17:30

_id avocaad_2001_19
id avocaad_2001_19
authors Shen-Kai Tang, Yu-Tung Liu, Yu-Sheng Chung, Chi-Seng Chung
year 2001
title The visual harmony between new and old materials in the restoration of historical architecture: A study of computer simulation
source AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary In the research of historical architecture restoration, scholars respectively focus on the field of architectural context and architectural archeology (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000) or on architecture construction and the procedure of restoration (Shi, 1988, 1989; Chiu, 1990). How to choose materials and cope with their durability becomes an important issue in the restoration of historical architecture (Dasser, 1990; Wang, 1998).In the related research of the usage and durability of materials, some scholars deem that, instead of continuing the traditional ways that last for hundreds of years (that is to replace new materials with old ones), it might be better to keep the original materials (Dasser, 1990). However, unavoidably, some of the originals are much worn. Thus we have to first establish the standard of eliminating components, and secondly to replace identical or similar materials with the old components (Lee, 1990). After accomplishing the restoration, we often unexpectedly find out that the renewed historical building is too new that the sense of history is eliminated (Dasser, 1990; Fu, 1997). Actually this is the important factor that determines the accomplishment of restoration. In the past, some scholars find out that the contrast and conflict between new and old materials are contributed to the different time of manufacture and different coating, such as antiseptic, pattern, etc., which result in the discrepancy of the sense of visual perception (Lee, 1990; Fu, 1997; Dasser, 1990).In recent years, a number of researches and practice of computer technology have been done in the field of architectural design. We are able to proceed design communication more exactly by the application of some systematic softwares, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and so on (Lawson, 1995; Liu, 1996). The application of computer technology to the research of the preservation of historical architecture is comparatively late. Continually some researchers explore the procedure of restoration by computer simulation technology (Potier, 2000), or establish digital database of the investigation of historical architecture (Sasada, 2000; Wang, 1998). How to choose materials by the technology of computer simulation influences the sense of visual perception. Liu (2000) has a more complete result on visual impact analysis and assessment (VIAA) about the research of urban design projection. The main subjects of this research paper focuses on whether the technology of computer simulation can extenuate the conflict between new and old materials that imposed on visual perception.The objective of this paper is to propose a standard method of visual harmony effects for materials in historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example).There are five steps in this research: 1.Categorize the materials of historical architecture and establish the information in digital database. 2.Get new materials of historical architecture and establish the information in digital database. 3.According to the mixing amount of new and old materials, determinate their proportion of the building; mixing new and old materials in a certain way. 4.Assign the mixed materials to the computer model and proceed the simulation of lighting. 5.Make experts and the citizens to evaluate the accomplished computer model in order to propose the expected standard method.According to the experiment mentioned above, we first address a procedure of material simulation of the historical architecture restoration and then offer some suggestions of how to mix new and old materials.By this procedure of simulation, we offer a better view to control the restoration of historical architecture. And, the discrepancy and discordance by new and old materials can be released. Moreover, we thus avoid to reconstructing ¡§too new¡¨ historical architecture.
series AVOCAAD
email tsk.aa88g@nctu.edu.tw
last changed 2005/09/09 08:48

_id ddss2004_ra-177
id ddss2004_ra-177
authors Ballas, D., R. Kingston, and J. Stillwell
year 2004
title Using a Spatial Microsimulation Decision Support System for Policy Scenario Analysis
source Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-2408-8, p. 177-191
summary This paper discusses the potential of a spatial microsimulation-based decision support system for policy analysis. The system can be used to describe current conditions and issues in neighbourhoods, predict future trends in the composition and health of neighbourhoods and conduct modelling and predictive analysis to measure the likely impact of policy interventions at the local level. A large dynamic spatial micro-simulation model is being constructed for the population of Leeds (approximately 715,000 individuals) based on spatial microsimulation techniques in conjunction with a range of data, including 2001 Census data for Output Areas and sample data from the British Household Panel Survey. The project has three main aims as follows: (i) to develop a static microsimulation model to describe current conditions in Leeds; (ii) to enable the performance of ‘What if?’ analysis on a range of policy scenarios; and (iii) to develop a dynamic microsimulation model to predict future conditions in Leeds under different policy scenarios. The paper reports progress in meeting the above aims and outlines the associated difficulties and data issues. One of the significant advantages of the spatial microsimulation approach adopted by this project is that it enables the user to query any combination of variables that is deemed desirable for policy analysis. The paper will illustrate the software tool being developed in the context of this project that is capable of carrying out queries of this type and of mapping their results. The decision support tool is being developed to support policy-makers concerned with urban regeneration and neighbourhood renewal.
keywords Spatial Microsimulation, Spatial Decision Support Systems, Geotools
series DDSS
last changed 2004/07/03 20:13

_id avocaad_2001_10
id avocaad_2001_10
authors Bige Tunçer, Rudi Stouffs, Sevil Sariyildiz
year 2001
title Facilitating the complexity of architectural analyses
source AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary It is common practice for architecture students to collect documents on prominent buildings relevant to their design task in the early stage of design. While practitioners can rely on a body of design experience of their own, during the process of a new design, students can only draw from the examples of success and failure from other architects. In the past, such precedent based learning was implicit in the master-apprentice relationship common in the educational system. Nowadays academics commonly no longer have the possibility to maintain an extensive design practice, and instead introduce important outside precedents to the students. Thus, the study of important historical precedents or designs plays an important role in design instruction and in the students’ design processes. While there is no doubt that the most effective outcome of such a study would be achieved when the student does entire the study herself, students also benefit from a collaboration with peers, where they form groups to do an analysis of various aspects of a same building or over a group of buildings. By integrating the respective results into a common, extensible, library, students can draw upon other results for comparisons and relationships between different aspects or buildings. The complexity this introduces is best supported in a computer medium.The Web offers many examples of architectural analyses on a wide variety of subjects. Commonly, these analyses consist of a collection of documents, categorized and hyperlinked to support navigation through the information space. More sophisticated examples rely on a database for storage and management of the data, and offer a more complex categorization of the information entities and their relationships. These studies present effective ways of accessing and browsing information, however, it is precluded within these analyses to distinguish and relate different components within the project documents. If enabled, instead, this would offer a richer information structure presenting new ways of accessing, viewing, and interpreting this information. Hereto, documents can be decomposed by content. This implies both expanding the document structure, replacing document entities by detailed substructures, and augmenting the structure’s relatedness with content information. The relationships between the resulting components make the documents inherently related by content.We propose a methodology to integrate project documents into a single model, and present an application for the presentation of architectural analyses in an educational setting. This approach provides the students with a simple interface and mechanisms for the presentation of an analysis of design precedents, and possibly their own designs. Since all the information is integrated within a single environment, students will benefit from each others’ studies, and can draw new conclusions across analyses and presentations from their peers.
series AVOCAAD
email b.tuncer@bk.tudelft.nl, I.s.sariyildiz@bk.tudelft.nl, r.stouffs@bk.tudelft.nl
last changed 2005/09/09 08:48

_id 2006_000
id 2006_000
authors Bourdakis, Vassilis and Charitos, Dimitris (eds.)
year 2006
title Communicating Space(s)
source 24th eCAADe Conference Proceedings [ISBN 0-9541183-5-9], Volos (Greece) 6-9 September 2006, 914 p.
summary The theme of this conference builds on and investigates the pre-existing and endlessly unfolding relationship between two domains of scientific inquiry: Architecture, urban design and planning, environmental design, geography and Social theory, media and communication studies, political science, cultural studies and social anthropology. Architectural design involves communication and could thus be partly considered a communicational activity. Designers (or not) see architectural designs, implicitly, as carriers of information and symbolic content; similarly buildings and urban environments have been “read” and interpreted by many (usu- ally not architects) as cultural texts. At the same time, social and cultural studies have studied buildings and cities, as contexts for social and cultural activities and life in general, from their mundane expression of “everyday life” (Highmore, 2001) to elite expressions of artistic creativity and performance. Information and communication technologies (ICTs) support both of these levels of scientific inquiry in many ways. Most importantly however, ICTs need design studies, architectural and visual design, social and cultural studies in their quest to create aesthetically pleasing, ergonomically efficient and functional ICT sys- tems; this need for interdisciplinarity is best articulated by the low quality of most on-line content and applica- tions published on the web.
series eCAADe
type normal paper
email vas@uth.gr
more http://www.ecaade.org
last changed 2006/08/16 16:55

_id 6756
authors Butler, K.S., Rincón, H., Maria Lane, K. and Brand, R.
year 2001
title Construyendo una ciudad sostenible en la frontera: planificación de la ciudad de Colombia, Nuevo León, México [Constructing A Sustainable City In the Border: Planning of the City of Colombia, Nuevo León, Mexico ]
source 2da Conferencia Venezolana sobre Aplicación de Computadores en Arquitectura, Maracaibo (Venezuela) december 2001, pp. 194-203
summary The policy rationale for promotion of urban development in the Mexico-Texas borderland of Nuevo León is likely to be sustained and even strengthened. The University of Texasí participation in new town planning for Colombia spans at least three hierarchical levels with students, faculty members, practitioners and government officials joining efforts. At the ìstudio levelî, students completed a comprehensive landscape assessment for portions of the future city using GPS surveying and GIS database and modeling. Graduate students, using field data, updated 2000 maps/shapefiles, and spatial modeling as an analysis tool, created a series of spatial models to produce useful information about the study areaís inherent suitability for agriculture, human settlement and preservation. This work culminated in a research symposium, planning charrette, refinement of land use and infrastructure assumptions, and the development of masterplan elements for the future city. In contrast to the professional firm, the project provides unique opportunities for intensive learning and applied research that contribute to the ecological, social and economic well-being of new cities and developing regions,
keywords USA-Mexico Border; Sustainable Development; Regional Planning; Arch View
series other
email k.butler@mail.utexas.edu, rinconhr@mail.utexas.edu, maria@lane.web, rbrand@mail.utexas.edu
last changed 2003/02/14 07:29

_id 2178
authors Chevrier, C. and Perrin, J.P.
year 2001
title Interactive 3D reconstruction for urban areas. An image based tool
source Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 753-765
summary Urban applications (for example arrangement, new buildings, virtual sightseeing and walkthrough) require a three dimensional (3D) geometrical model of town areas. However, most of them do not need an accurate model of reality. Such model would occupy a considerable memory space and would be too slow to handle. Architects, urban designers and civil engineers can find in our tool a medium to conceive their projects. Some types of software exist but they do not correspond exactly to our needs. Consequently we have conceived and developed an interactive tool for virtual 3D rough reconstruction of buildings. The software development has been performed in the Maya environment (ALIAS Wavefront) with C++ language and MEL (Maya Embedded Language). A constraint we set for ourselves was the use of only light devices (for easy transportation) at low price (everybody can buy such devices). The principle is to overlay on the scanned photograph of the area we want to deal with, the two dimensional (2D) cadastral plan displayed from the same viewpoint as the picture. Then each building body can be extruded from its ground polygon and the roof can be created from what the user sees on the picture. A constraint is the flatness of the polygonal surfaces. Our application context was the town of Nancy in France for which some areas have been reconstructed. Some pictures have been used as textures for polygonal surfaces, giving more reality effect to the simulation.
keywords Geometrical Modelling, Architecture, Urban Area, Virtual Visit
series CAAD Futures
email chevrier@crai.archi.fr
last changed 2006/11/07 06:22

_id avocaad_2001_06
id avocaad_2001_06
authors Giovanni De Paoli
year 2001
title Architectural design and procedural models - A radical change of language to design in architecture
source AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary The history of architecture and its teaching clearly reveal how representations of the image and drawing have changed over centuries. Today, computers are increasingly found at the desks of architecture professionals and students, but their usage remains restricted to technical functions and what is commonly known as CAD (computer-assisted design), in architecture is often simply the other CAD (computer-assisted drawing).This presentation deals with architectural design, particularly at its earliest stage. Our objective is to propose a model for describing the architectural concept that meets the needs of architects through software. Only then will they really be able to use computers as an aid to design by overcoming the obstacles that presently keep us from making full use of them.This has led me to propose an avenue of exploration that examines projection through an object’s properties, and a method of computer-assisted design that makes use of procedural models. These procedural models consist of geometric operators and operators that define the properties, characteristics and performance of a building — operators which I have termed “semantic”.This research fits into a paradigm that leads to representation of the building through functions that can be called with parameters and encapsuled in an algorithm, making it possible to create procedural models that assist with the design. This approach opens up a means of integrating the logos with the figurative representation where drawing is used instead of words to convey the architectural concept.The example of a procedural model shows how we can use a generic model to produce a volume model with all the characteristics belonging to the same family of objects. This type of model can serve not only to illustrate the result of a process, or to draw connections among buildings on the basis of their construction process, or to test the validity of a rule typical of a set of objects, but also to integrate, through a functional language, semantic operators which to date have been excluded from the initial design phase. This descriptive mechanism is extremely powerful in making it possible to establish relationships among the functions and properties of a building and the purpose of the architectural project.The scientific contribution of this research is to test the hypothesis that we can use computer tools to manipulate operators which enable the architect to reappropriate a complex design of the building, and open up new lines of investigation into integrating geometric and knowledge-based systems into a unified representation. The declarative approach for creating three-dimensional scenes fits into this perspective.It is now a matter of exploring the possibility of working on a “common morphology” shared by everyone involved in the design process by rewriting the functions or by converting the functions used for representation, or else through a functional dialect (language) that allows for dialectic relationships among all types of operators and the actions of the protagonists in the architectural design process.
series AVOCAAD
email Giovanni.De.Paoli@Umontreal.CA
last changed 2005/09/09 08:48

_id 943c
authors Hendricx, A. and Neuckermans, H.
year 2001
title The object model at the core of the IDEA+ design environment
source Beheshti, R. (ed), Advances in Building Informatics, Proceedings of the 8th EuropIA International Conference on the application of Artificial Intelligence, Robotics and Image Processing to Architecture, Building Engineering & Civil Engineering, Delft, The Netherlands, April 25-27, 2001, pp. 113-125
summary This paper focuses on three different aspects in which the IDEA+ core model differs from many other product modelling research initiatives: the systematic approach in the construction of the model, the respect for the evolutionary nature of architectural design, and the use of actual and complete design cases to test the model. Key words: CAAD, product modelling, integrated design environment, MERODE 1 The IDEA+ project: towards an integrated design environment In spite of the extensive use of all kinds of hardware and software in the architectural offices, the use of computers still does not contribute essentially to better architecture. For the CAD packages on the one hand, they have proven to be an efficient alternative for the traditional drawing board. Yet they fail in the early conceptual stage of design where creativity and exploration play the leading role. For computational tests and analysis tools on the other hand, they can hardly handle the typical absence o
series other
email Herman.Neuckermans@asro.kuleuven.ac.be
last changed 2003/04/23 13:14

_id a40c
authors Inkinen, Tommi
year 2001
title A city revised: representing or recreating the urban space as a polygon experience – a discussion of the case of virtual Turku
source CORP 2001, Vienna, pp. 351-354
summary The Internet has provided a new means to represent urban space. The development of modelling languages,like VRML, has given us the tools to recreate urban locations on the net. In this paper, the virtual image ofTurku, a city located in Southwest Finland is discussed. My approach is twofold. Firstly, I focus on the‘official’ city web-page and its two dimensional textual appearance. This constitutes the essence of virtualcity as ‘public’ project. Secondly, there is a challenging new field that combines aspects from computersciences, urban studies and Internet research. This refers to three-dimensional city models that are used torepresent an exact copy of the material space of cities. The analysis is based on interpretation of interviewsand contents of the two site structures. The following conclusions are proposed. The mission of a virtualpublic city is twofold: it is a local project, purposed to build a new and efficient medium to connect theadministration and citizens; and it is also a global/national project, a medium of advertising and givingknowledge of the tourist possibilities and attractions. On the other hand, the private virtual city project isbased on potential future incomes. It is a means of gaining profit via expanding possibilities provided by ecommerce.
series other
email toalin@utu.fi
more www.corp.at
last changed 2002/12/19 11:18

For more results click below:

this is page 0show page 1show page 2show page 3show page 4show page 5... show page 35HOMELOGIN (you are user _anon_748352 from group guest) CUMINCAD Papers Powered by SciX Open Publishing Services 1.002