CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 41 to 60 of 563

_id ddss2004_ra-177
id ddss2004_ra-177
authors Ballas, D., R. Kingston, and J. Stillwell
year 2004
title Using a Spatial Microsimulation Decision Support System for Policy Scenario Analysis
source Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-2408-8, p. 177-191
summary This paper discusses the potential of a spatial microsimulation-based decision support system for policy analysis. The system can be used to describe current conditions and issues in neighbourhoods, predict future trends in the composition and health of neighbourhoods and conduct modelling and predictive analysis to measure the likely impact of policy interventions at the local level. A large dynamic spatial micro-simulation model is being constructed for the population of Leeds (approximately 715,000 individuals) based on spatial microsimulation techniques in conjunction with a range of data, including 2001 Census data for Output Areas and sample data from the British Household Panel Survey. The project has three main aims as follows: (i) to develop a static microsimulation model to describe current conditions in Leeds; (ii) to enable the performance of ‘What if?’ analysis on a range of policy scenarios; and (iii) to develop a dynamic microsimulation model to predict future conditions in Leeds under different policy scenarios. The paper reports progress in meeting the above aims and outlines the associated difficulties and data issues. One of the significant advantages of the spatial microsimulation approach adopted by this project is that it enables the user to query any combination of variables that is deemed desirable for policy analysis. The paper will illustrate the software tool being developed in the context of this project that is capable of carrying out queries of this type and of mapping their results. The decision support tool is being developed to support policy-makers concerned with urban regeneration and neighbourhood renewal.
keywords Spatial Microsimulation, Spatial Decision Support Systems, Geotools
series DDSS
last changed 2004/07/03 20:13

_id ddss2004_ra-161
id ddss2004_ra-161
authors Bandini, S., S. Manzoni, and G. Vizzari
year 2004
title Crowd Modeling and Simulation
source Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-2408-8, p. 161-175
summary The paper introduces a Multi Agent Systems (MAS) approach to crowd modelling and simulation, based on the Situated Cellular Agents (SCA) model. This is a special class of Multilayered Multi Agent Situated System (MMASS), exploiting basic elements of Cellular Automata. In particular SCA model provides an explicit spatial representation and the definition of adjacency geometries, but also a concept of autonomous agent, provided with an internal architecture, an individual state and behaviour. The latter provides different means of space-mediated interaction among agents: synchronous, between adjacent agents, and asynchronous among at-a-distance entities. Heterogeneous entities may be modelled through the specification of different agent types, defining different behaviours and perceptive capabilities. After a brief description of the model, its application to simple crowd behaviours will be given, and an application providing the integration of a bidimensional simulator based on this model and a 3D modelling application (3D Studio) will also be described. The adoption of this kind of system allows the specification and simulation of an architectural design with reference to the behaviour of entities that will act in it. The system is also able to easily produce a realistic visualization of the simulation, in order to facilitate the evaluation of the design and the communication with involved decision-makers. In fact, while experts often require only abstract and analytical results deriving from a quantitative analysis of simulation results, other people involved in the decision-making process related to the design may be helped by qualitative aspects better represented by other forms of graphical visualization.
keywords Multi-Agent Systems, 3D modelling, Simulation
series DDSS
last changed 2004/07/03 20:13

_id 2004_617
id 2004_617
authors Barelkowski, Robert
year 2004
title The Optimization of Assumptions of the Reconstruction of Monumental Objects of Romanesque and Gothic Architecture - Computer Aided Archeological and Architectural Research
source Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 617-623
summary The paper discusses the methodological principles, the structure and the application aspects of individually created software application helping in architectural / archaeological research. The program is designed as 3layer software, providing the user with database, application with all functional modules and interface. The key content is the modular application allowing dynamic structural analyses, comparative analyses and other various possibilities, necessary in collecting and revising data from different sources. In author’s opinion the Manticora software is able to vastly support the interdisciplinary research and can help in optimizing its results.
keywords Interdisciplinarity, Computer Aided Architectural / Archaeological Research, Programming Tools, Programming Implementations for Architecture
series eCAADe
email robert@armageddon.poznan.pl
last changed 2004/09/18 06:45

_id 5cf4
id 5cf4
authors Barrionuevo, Luis F.
year 2004
title LOS "SPIROSPACES"
source Proceedings of the Fourth International Conference of Mathematics & Design, Special Edition of the Journal of Mathematics & Design, Volume 4, No.1, pp. 179-187.
summary This paper deals with “Spirospaces”. These are a conversion to the third dimension of the two dimensional geometric entities called “Spirolaterals”.

Abelson, Harold, diSessa and Andera (1968) gave the first rules concerning Spirolaterals. To obtain a Spirolateral from a set of straight lines, the first of them must be one unit long and the following must be incremented one unit at each step, at the same time that they turn in a constant direction. Odds (1973) establish the variation of the rotation direction, either to the left or the right. However, he did not give a mathematical relation able to calculate open Spirolaterals. Krawczyk (2001) developed a computer program that generates Spirolaterals following the method suggested by Abelson. These are Spirolaterals obtained by enumeration without a predictive mathematical formula. Krawczyc went farther proposing Spirolaterals based in curved lines. He pointed out that there are a variety of spirolateral forms that have architectural potentiality. Following this, the architectural potentiality of Spirolaterals is the basis of this paper.

To take advantage of that potentiality a computer program was implemented to generate spatial configurations based in Spirolaterals. When a third dimension is given to the Spirolaterals they become Spirospaces. These new entities need spatial and design parameters to be useful for architectural purposes. Barrionuevo and Borsetti (2001) gave results about that work establishing the concept of Spirospaces.

The aim of this paper is to describe a work directed to improve rules and procedures concerning Spirospaces. It is expected that these procedures governed by the proposed rules can be employed as tools during the early steps in the architectural design process.

In this work some aspects concerning Spirospaces are considered. First, Spirolaterals are presented as the predecessors of Spirospaces. Second, Spirospaces are defined, together with their structural parameters. Architectural modeling is studied at the light of two special elements of the Spirospaces: Interstitial spaces and Object spaces. Next, a computer program is presented as the appropriate tool to model configurations having architectural potentiality. Finally, the results obtained running the computer program are analyzed to determine their possible use as architectural forms. Several graphic illustrations are presented showing steps going from the exploration of spatial alternatives to the selection of a specific configuration to be developed.

It is expected that the described computer program could be employed as a design aid tool. As the operation of the program generates a variety of spaces able to dwell architectural objects, it eases the search of configurations suitable to specific functions. The results obtained have the possibility of being exported to computer graphic applications able to add materials, lights and cameras.

keywords Spirolaterals, Spirospaces, architectural spaces, interstitial spaces, objectual spaces
series other
type normal paper
email labsist@hotmail.com
last changed 2005/04/07 13:34

_id ascaad2004_paper2
id ascaad2004_paper2
authors Barrionuevo, Luis F.; Roberto Gómez López, and Roberto Serrentino
year 2004
title Spirospaces in Architectural Design
source eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary The proposal of this paper is to present "Spirospaces" and their utility in Architectural Design, exploring their relation with other geometrical disciplines such as knot theory, tiling and patterns generation. A spirospace is a geometrical entity generated from the spatial interpretation of a "Spirolateral", a well known bidimentional entity. A computer program to generate spirospaces configurations is presented and demonstrated with several examples. This is complemented with the exposition of the mathematical framework that supports closed spirospaces generation.
series ASCAAD
email labsist@herrera.unt.edu.ar
last changed 2007/04/08 17:47

_id eaea2003_28-barchougova
id eaea2003_28-barchougova
authors Bartchougova, E. and Rochegova, N.
year 2004
title About Virtual Spatial Modeling in Architectural Education
source Spatial Simulation and Evaluation - New Tools in Architectural and Urban Design [Proceedings of the 6th European Architectural Endoscopy Association Conference / ISBN 80-227-2088-7], pp. 138-142
summary The professional perception of the architectural space characterizes the most advanced level of the architect’s mastership. In the article the virtual modeling is regarded as an effective way of forming the professional perception of integrity of architectural space. Computer technologies bring together bi-dimensional and three-dimensional languages of modeling and thus they help the procedure of movement of consciousness from the plane to volumetric images and back to the visual and mobile. They help to carry out the level-by-level analysis of the multilevel structure of an architectural reality in the mode of active dialogue. The process of interaction of consciousness with the model becomes accessible to studying. There appears an opportunity to manage this process with the aim of forming perception.
series EAEA
more http://info.tuwien.ac.at/eaea
last changed 2005/09/09 08:43

_id eaea2003_13-bartik
id eaea2003_13-bartik
authors Bartik, R.
year 2004
title Materials and Technologies Utilized in Creation of Architectural Models
source Spatial Simulation and Evaluation - New Tools in Architectural and Urban Design [Proceedings of the 6th European Architectural Endoscopy Association Conference / ISBN 80-227-2088-7], pp. 59-64
summary The preliminary consideration of criteria directly influencing the choice of technology and material is always essential for the expression of the architect’s or investor’s images.
series EAEA
more http://info.tuwien.ac.at/eaea
last changed 2005/09/09 08:43

_id eaea2003_21-ws-bartik
id eaea2003_21-ws-bartik
authors Bartik, R.
year 2004
title The Model of the Town Hradec Kralove 2000
source Spatial Simulation and Evaluation - New Tools in Architectural and Urban Design [Proceedings of the 6th European Architectural Endoscopy Association Conference / ISBN 80-227-2088-7], pp. 103-105
summary The work on this model is a unique case not only with regard to its extent but predominantly to the implementation of the most up-to-date model production technologies developed on the basis of research activities in the Institute of Model Design, Faculty of Architecture, Czech Technical University in Prague. The construction of the 2000 HK model was ordered on the basis of tender by the Municipality Office of Hradec Králové – Department of the Architect on occasion of the 775th anniversary of the town’s foundation.
series EAEA
more http://info.tuwien.ac.at/eaea
last changed 2005/09/09 08:43

_id ddss2004_ra-69
id ddss2004_ra-69
authors Barton, J., B. Parolin, and V. Weiley
year 2004
title A Spatial Decision Support System for the Management of Public Housing
source Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-2408-8, p. 69-84
summary This paper is reporting on a research project undertaken jointly between the University of New South Wales (UNSW) and the NSW Department of Housing (DoH) to develop a Spatial Decision Support System (SDSS) to assist planning, management and evaluation in areas of high public housing concentration. In the paper we will describe the development of the SDSS, the specific spatial problems challenging the DoH and the potential for the system to incorporate a range of social, financial and physical data, both internal and from other sources, for interaction and presentation in a three dimensional environment. The prototype SDSS attempts to address the specific challenges of providing better service for clients of the DoH. An information audit and survey has been conducted of the department’s resources and needs. Issues identified include the management of high-rise and superlot areas, crime mapping, community interactivity, internal and intergovernmental information sharing, interoperability and maintaining confidentiality and security of data. Interactive 3D visualisation of the model is facilitated by use of the 3map free geospace platform. Use of open source code and open standards such as X3D for 3D graphics interchange allow the project to explore advanced visualisation techniques while ensuring interoperability and data longevity.
keywords Spatial Decision Support System, Public Housing, Community Renewal, Security, Open Source, Interoperability, Visualisation, 3D GIS, PPGIS, X3D
series DDSS
last changed 2004/07/03 20:13

_id 411caadria2004
id 411caadria2004
authors Bauni Hamid
year 2004
title Visualizing Urban Resettlement Project in the Context of Community-Based Development
source CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 707-716
summary This research was focused on visualizing new housing model and its customization based on people’s option as part of implementing community-based development principle. There are two significant research findings that are discussed in this paper that will be basis for developing a user-friendlier digital model as part of longterm research in visualizing whole resettlement process. The role of local person who is authorized to handle the model and to customize it to other inhabitants in the resettlement area is very essential in order to achieve the maximum versatility of the model. Another significant finding is potential of VRML model as information nodes for other digital modeling alternatives in an integrated information system for urban revitalization project.
series CAADRIA
email bauni@indosat.net.id
last changed 2004/05/20 17:41

_id ddss2004_ra-279
id ddss2004_ra-279
authors Bax, M.F.Th. and H.M.G.J. Trum
year 2004
title On the Notion of Level in Architecture
source Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-2408-8, p. 279-292
summary The notion of Level (in a scale of Levels) is probably the most authentic notion in Architecture. Already in the work of Vitruvius the notion is implicitly present in the triad ‘ordinatio – symmetria – eurythmia’. In more recent times, the notion always appears in relation with hierarchical organization as a means of control of quality. However used in drawings and in architectural discourse, the term lacks precision; there are many types of level like abstraction, specification, dependency, resolution levels etc., but no operational definition can be found as a notion that structures architectural objects and design processes simultaneously in a consistent way. Defining this notion of Level is the purpose of this paper. An example of application in an architectural decision-making process completes the paper.
keywords Levels, Hierarchy, Architecture, Composition, Complexity, Control
series DDSS
last changed 2004/07/03 20:13

_id acadia04_088
id acadia04_088
authors Bechthold, Martin
year 2004
title Digital Design and Fabrication of Surface Structures
source Fabrication: Examining the Digital Practice of Architecture [Proceedings of the 23rd Annual Conference of the Association for Computer Aidd Design in Architecture and the 2004 Conference of the AIA Technology in Architectural Practice Knowledge Community / ISBN 0-9696665-2-7] Cambridge (Ontario) 8-14 November, 2004, 88-99
summary This paper presents a study in digital design and manufacturing of shells, which are material-efficient systems that generate their load-bearing capacity through curvature. Their complex shapes are chal­lenging to build, and the few current shell projects employ the same shape repetitively in order to reduce the cost of concrete formwork. Can digital design and manufacturing technology make these systems suitable for the needs of the 21st century? The research developed new digitally-driven fabrication processes for Wood-Foam Sandwich Shells and Ferrocement-Concrete Sandwich Shells. These are partially pre-fabricated in order to allow for the application of Computer-Numerically Controlled (CNC) technology. Sandwich systems offer advantages for the digitally-enabled construction of shells, while at the same time improving their structural and thermal performance. The research defines design and manufacturing processes that reduce the need for repetition in order to save costs. Wood-Foam Sandwich shells are made by laminating wood-strips over a CNC-milled foam mold that eventually becomes the structural sandwich core. For Ferrocement-Concrete sandwich shells, a two-stage process is presented: pre-fabricated ferrocement panels become the permanent formwork for a cast-in-place concrete shell. The design and engineering process is facilitated through the use of parametric solid modeling envi­ronments. Modeling macros and integrated Finite-Element Analysis tools streamline the design process. Accuracy in fabrication is maintained by using CNC techniques for the majority of the shaping processes. The digital design and manufacturing parameters for each process are verified through design and fabrication studies that include prototypes, mockups and physical scale models.
keywords Shell, Pre-Fabrication, Prototype, Custom-Manufacturing, Simulation
series ACADIA
email mbechthold@gsd.harvard.edu
last changed 2010/05/16 07:09

_id acadia04_000
id acadia04_000
authors Beesley, P., Cheng, N.Y.-W. and Williamson, R.S. (eds.)
year 2004
title FABRICATION: EXAMINING THE DIGITAL PRACTICE OF ARCHITECTURE
source Proceedings of the 23rd Annual Conference of the Association for Computer Aided Design in Architecture and the 2004 Conference of the AIA Technology in Architectural Practice Knowledge Community / ISBN 09696665-2-7] Cambridge (Ontario) 8-14 November, 2004.
summary We are presenting design ideas, technical innovation, and fabrication expertise that address crucial issues. Authors investigate how to effectively design and practice architecture with automated prototyping and manufacturing. We want to understand where this might lead, and how it might change the nature of architecture itself. We are just beginning to discover the opportunities to be found in integrating automated fabrication within the practice of architecture. At the same time, the new century has brought very mixed perspectives on confident Modern progress. A cautious scrutiny of 'innovation' is needed. Fabrication is an old word with the straightforward meaning, to make. The roots of the word lead to the origins of architecture. Making has been considered a virtue by ancient writers and modern politicians alike. Fabrication (and homo faber, 'one who makes') have served as fundamental terms that constitutions and contract laws have been built upon. Shaping and working with materials is at the core of Western civilization. However at a point in human history where nature is steadily being replaced by human artifice, the consequences of making are far from simple. Whether for good or ill, our new fabricated environment is transforming the world.
series ACADIA
type normal paper
last changed 2005/03/07 06:14

_id ddss2004_d-269
id ddss2004_d-269
authors Beetz, J., J. van Leeuwen, and B. de Vries
year 2004
title Towards a Multi Agent System for the Support of Collaborative Design
source Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Developments in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN 90-6814-155-4, p. 269-280
summary In this paper we are drafting the outline of a framework for a Multi Agent System (MAS) for the support of Collaborative Design in the architectural domain. The system we are proposing makes use of Machine Learning (ML) techniques to infer personalized knowledge from observing a users’ action in a generic working environment using standard tools such as CAD packages. We introduce and discuss possible strategies to combine Concept Modelling (CM)-based approaches using existing ontologies with statistical analysis of action sequences within a domain specific application. In a later step, Agent technologies will be used to gather additional related information from external resources such as examples of similar problems on the users hard disk, from corresponding work of team-members within an intranet or from advises of expert from different knowledge domains, themselves represented by agents. As users deny or reward resulting proposals offered by the agent(s) through an interface the system will be enhanced over time using methods like Reinforced Learning.
keywords Multi Agent Systems, Design & Decision Support Systems, Collaborative Design, Human Computer Interfaces, Machine learning, Data Mining
series DDSS
last changed 2004/07/03 20:13

_id acadia04_186
id acadia04_186
authors Bell, Bradley
year 2004
title Digital Tectonics: Structural Patterning of Surface Morphology
source Fabrication: Examining the Digital Practice of Architecture [Proceedings of the 23rd Annual Conference of the Association for Computer Aided Design in Architecture and the 2004 Conference of the AIA Technology in Architectural Practice Knowledge Community / ISBN 0-9696665-2-7] Cambridge (Ontario) 8-14 November, 2004, 186-201
summary The computer in architectural design has shifted from its role as a merely representational device to that of a tool for instrumentalized simulation and fabrication. The desire to make buildings look like a rendering, or to produce photo-realistic images and walkthroughs has given way to an opening of the potentials of software to assist the designer with managing complex geometries, parametric organizational diagrams, structural analysis, and integrated building systems. Simulation has become the means by which virtual space becomes more than just a mirror of reality. It becomes the space within which different potential realities can be tested and evaluated before they are materially implemented. In architecture, information derived from material constraints to site conditions can be constantly fed into the computer models to provide an accurate update, which in turn introduces feedback into the overall design, and change can then be registered in the detail.
keywords surface, patterns, structure, CAD/CAM, fabrication
series ACADIA
email bbell3@tulane.edu
last changed 2010/05/16 07:09

_id 304caadria2004
id 304caadria2004
authors Beng-Kiang Tan
year 2004
title Integrating Digital Modeling and Full-Scale Construction in Design Studio
source CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 433-442
summary This paper presents the observations of a design studio for undergraduates that adopted a hands-on, experiential approach where students combined both digital modeling and full-scale construction in their design process. The studio was designed as team-based to encourage peer learning and collaboration in design. The students used multiple media and engaged in tactile experience and through the process discovered by themselves the issues of translating digital design into full-scale construction and achieved a better understanding of construction, scale and materiality.
series CAADRIA
email akitanbk@nus.edu.sg
last changed 2004/05/20 17:39

_id ascaad2006_paper29
id ascaad2006_paper29
authors Bennadji, A. and A. Bellakha
year 2006
title Evaluation of a Higher Education Self-learning Interface
source Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary This paper is a follow-up to a previous paper published in ASCAAD 2004 (A. Bennadji et al 2005). The latter reported on CASD (Computer Aided Sustainable Design) a self-learning educational interface which assists the various building’s actors in their design with a particular attention to the aspect of energy saving. This paper focuses on the importance of software evaluation and how the testing is done to achieve a better human-machine interaction. The paper will go through the summative evaluation of CASD, presents the output of this evaluation and addresses the challenge facing software developers: how to make an interface accessible to all users and specifically students in higher education.
series ASCAAD
email a.bennadji@rgu.ac.uk
last changed 2007/04/08 17:47

_id ascaad2004_paper9
id ascaad2004_paper9
authors Bennadji, A.; H. Ahriz, and P. Alastair
year 2004
title Computer Aided Sustainable Design
source eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary One of the most important aspects architects need to consider fairly early on is that of energy saving, cost, thermal comfort and the effect on the environment in terms of CO2 emissions. At present, during the early design stage of a building, different options are assessed using simple tools (tables, graphs and software) that contain a large number of assumptions the very nature of which can bias choice or possibly lead to an inappropriate solution. It can be argued that the only way to provide a rational assessment of options is to use calculation methods that represent in detail the physical processes involved; this usually involves the use of dynamic thermal models. Furthermore if this tool is also used during detailed design it would introduce a consistency that is normally absent from the analytical design process. Many designers are of the opinion that, because not all details are known, then such tools are not suitable for application at early stages in the design. This view can be challenged because, even at the concept stage, a great deal is known about a building. This paper aims to show that a general description of a building can be used to generate sufficient data to drive a valid analysis using a detailed thermal model at the early sketch stage of the design process. The paper describes the philosophy, methodology and the interface developed to achieve this aim. The interface guides the user through the input process using a series of screens giving options for keywords used to describe the building; comprehensive default data built into the software are then attached to these keywords. The resulting data file is a building description that is the best possible interpretation of the design intent. This can then be used to assess options and guide towards a final design.
series ASCAAD
email a.bennadji@rgu.ac.uk
last changed 2007/04/08 17:47

_id b83a
id b83a
authors Benoudjit A, Derix C and Coates P
year 2004
title Human perception and space classification: The Perceptive Network
source Proceedings of the Generative Arts conference, Milan, 2004
summary This paper presents a computer model for space perception, and space classification that is built around two artificial neural networks (ANN). This model is the first known application in architecture, where a self-organized map (SOM) is used to create a space classification map on the base of human perception criteria. This model is built with the aim to help both the space designers (architects, interior designer and urban designers), and the space users to gain a better understanding of the space in particular, and the environment where they evolve in general. This work is the continuity of an outgoing work started in the CECA by C. Derix around Kohonen network.
keywords neural network, self-organised feature map, perception, spatial configuration
series other
type normal paper
email christian.derix@aedas.com
more http://www.generativeart.com/
last changed 2012/09/20 19:28

_id sigradi2011_409
id sigradi2011_409
authors Bertoni, Griselda; De Monte, Andrea
year 2011
title Mediaciones perceptivas. Desafíos en la incorporación de la tecnología como instrumento potenciador del proceso de aprendizaje en el TCG [Perceptual mediation. Challenges in incorporating technology as a tool enhacing the learning process in the TCG]
source SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 472-475
summary This work presents an introduction to current problems detected in the teaching and learning of perceptual and communication processes in front of the availability of disipositivos installed and digital media courses to students enrolled for Design and Architecture careers of our faculty. The same seeks to clarify a state of affairs to continue studies already carried out (Stipech 2004), (Bertero 2009), in relation to issues of representation in the design disciplines, while rehearsing possibilities updated theory and practice in the field of workshop.
series SIGRADI
email andreademonte@sdarquitectos.com.ar
last changed 2016/03/10 08:47

For more results click below:

show page 0show page 1this is page 2show page 3show page 4show page 5show page 6show page 7... show page 28HOMELOGIN (you are user _anon_541052 from group guest) CUMINCAD Papers Powered by SciX Open Publishing Services 1.002