CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 101 to 120 of 548

_id caadria2005_a_8a_b
id caadria2005_a_8a_b
authors Riken Homma, Kazuhisa Iki, Ryouichi Ise
year 2005
title Development of the knowledge-sharing sheet system for landscape design management
source CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 376-386
summary In a public design, such as a landscape, it is important that the information on the design process be shared among the planners, the administration, and the citizens, and to continue the design work with consensus. A landscape design proposal cannot be reasonably evaluated from only the result of a design since the decision making process would not be sufficiently explained. Therefore, designers are required to record and store several design documents during the design process. The development of a knowledge management technique is desirable in order to facilitate the sharing of the project information in the designer’s group. The authors have researched knowledge management in a landscape design process, developed a heuristic knowledge-sharing tool that aids decision-making by consensus in a design process. This tool is a sheet system based on XML (extensible markup language). It allows the user to retrieve knowledge from a similar design project, and to customize the formats of a sheet according to the design process.
series CAADRIA
email homma@ge.kumamoto-u.ac.jp
last changed 2005/04/30 01:30

_id acadia05_128
id acadia05_128
authors Sanchez-Del-Valle, Carmina
year 2005
title Adaptive Kinetic Architecture: A Portal To Digital Prototyping
source Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 128-140
summary This paper presents a definition for adaptive kinetic structures in architecture, generated from an examination of research in engineering and architecture. This characterization introduces the challenges presented both by modeling form and environment, and simulating their interaction. Adaptive kinetic structures react to a changing environment, as well as generate their own. These conditions make them appropriate subjects through which the design and implementation of tools for ‘digital prototyping’ may be explored. Digital prototyping serves performance and simulation-based design. In general terms, it is an interdisciplinary integrated approach for modeling, predicting, and analyzing the behavior of a system. It is at the core of virtual engineering. In the aerospace, automobile, and manufacturing industries, it is practiced extensively through discrete-event and continuous simulations, as well as simulation environments. This paper provides an overview of digital prototyping commercial software for engineering applications that can be transferred to architecture, and identifies some of the unresolved issues. It thereby extends the vision of the comprehensive building information modeling initiative.
series ACADIA
email carmina.sanchez@hamptonu.edu
last changed 2005/10/25 16:52

_id 2005_237
id 2005_237
authors Schink, Claus-Jürgen, König, Holger and Krines, Manfred
year 2005
title The “BASYS”-house - From a Research Project to Practice - a house in a day
source Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 237-243
summary From 2000 to 2002 a building system was developed within an applied research project for creating individual planned, but widely prefabricated building- elements consisting of “Brettstapelholz”. These are massive wood elements, fabricated by a CNC-machine. Two years later the results were transferred to the building industry. Most of the developed innovations had been adapted, the virtual enterprise worked together spatially separated via a common internet platform. The building elements developed by the architect were used. Although working properly, the complete integration of the CAD/CAM chain hadn’t been completely adapted. The house was shown at the “Bau”-exhibition in Munich. The following day it was mounted 350 km far from Munich and finished at the same day. Overall, it took only one day to mount the house, from the bottom to the roof. The article will show the building system and discuss the experiences gained by transferring research to industry.
keywords Multidisciplinary Design for Sustainability, CAD-CAM, Massive Wood Construction, Industrial Production of Buildings, Sustainable Construction, Low-eMission Buildings, Virtual Enterprise, Integral Planning Process
series eCAADe
email claus.schink@ifib.uni-karlsruhe.de
last changed 2012/11/23 18:17

_id cf2005_2_11_132
id cf2005_2_11_132
authors SCHNABEL Marc Aurel
year 2005
title Interplay of Domains
source Learning from the Past a Foundation for the Future [Special publication of papers presented at the CAAD futures 2005 conference held at the Vienna University of Technology / ISBN 3-85437-276-0], Vienna (Austria) 20-22 June 2005, pp. 11-20
summary A diversified, open-ended, and critical approach of architectural design that interplays with a variety of media, suggests an innovative development to gain new spatial solutions. Architects and designers are aware of these possibilities by integrating physical and digital media during their design process, yet the creative potentials of these media are rarely used to their full potentials. The architectural design process can be enriched by using uncommon perceptions, comprehensions, and conceptions of spatial design translations within both physical and virtual environments. A wilful interplay with the design media and the process offers the possibility to dismantle the limits of each domain and explore the design itself in unorthodox ways. The overall engagement within both real and virtual environments leads to innovative form creations and powerful design solutions. Following the tradition of artists, who explore media in unusual ways, new architectural interpretations emerge, reflecting on the media as well as the architectural design.
keywords design process, design media, form generation, physical and virtual environments
series CAAD Futures
email marcaurel@hku.hk
last changed 2005/05/05 05:06

_id caadria2005_a_2b_b
id caadria2005_a_2b_b
authors Sooyeon Oh, Rieko Kadobayashi, Tsuyoshi Sasada, Katsumi Tanaka
year 2005
title Collaborative Project To Conserve and Personalize the 3D Digital Archives of Historical Architecture
source CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 179-187
summary In this paper, we will discuss methods for supporting a collaborative experience of 3D digital archives of historical architecture. We will use a prototype system for 3D digital archives of historical architecture using VR technology. Moreover, a prototype system using web technology such as Weblogs will also be used. In addition, we are refining the present system by applying it to the Turkish Republic Gemiler Island Church Restoration Project.
series CAADRIA
email sooyeon@nict.go.jp
last changed 2005/04/30 01:30

_id 2005_679
id 2005_679
authors Steinø, Nicolai and Veirum, Niels Einar
year 2005
title A Parametric Approach to Urban Design
source Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 679-686
summary It is the thesis of this paper, that the application of a parametric design approach to urban design has great potentials for improving the systematic testing and subsequent argumentation for urban design proposals. Parametric design has so far mainly been applied to engineering. However, the ‘components’ constituting an urban design also share similarities that may be defined parametrically. Aspects such as density, use, mix, form, space, and typology may all be defined parametrically. By doing so, it is possible to not only perform a systematic de-sign process, but also to evaluate the pros and cons of scenarios with different parametric settings. On the basis of a theoretical discussion, followed by a case study in the form of a student workshop, the paper will discuss the nature and scope of parametric urban design, draw some preliminary conclusions, and outline some possible perspectives for the development of parametric urban design.
keywords Parametric, Parameters, Urban Design, Methodology, Workshop, CAD
series eCAADe
email steino@aod.aau.dk
last changed 2012/11/23 18:17

_id 791f
id 791f
authors Stellingwerff, M. C.
year 2005
title VIRTUAL CONTEXT - INVESTIGATING THE CHARACTERISTICS AND OPPORTUNITIES OF DIGITAL VISUALISATION MEDIA FOR SITUATED APPROACHES TO ARCHITECTURAL DESIGN IN AN URBAN ENVIRONMENT
source Delft University Press
summary This research initiative addresses the issue of Design in relation to Virtual Context.

Central to this study are the innovative potentials and instrumental opportunities of computer based media techniques, capable of generating interactive models and changing perspectives for the benefit of urban and architectural design.

The ambition was to not only make a contribution to the existing body of knowledge concerning digital technologies and their applications, but explore theoretical conditions which might help define and stimulate further study.

From the outset, the focus was on furthering the opportunities for computer based representation media in creative design. On the basis of a series of explorative studies the subject of this research was targeted: the issue of Design in Context, or more specifically: Design(ing) in a Virtual Context.

During the process there was a marked shift in the conception of the subject from – more or less immersive – VR technologies in the direction of approaches which might be expected to become readily available in practice and education and could be effective in actual design processes. This insight also brought about a shift in emphasis from realism per-se towards creating a sense of situatedness.

The design representation system which was developed was intended to not just allow for one type of model view, but to afford an array of different views, from which the designer would be able to choose freely, depending on the phase and focus of design as well as personal preferences. A series of interface prototypes and support tools were developed especially and successively tested experimentally. 

For the intended final design driven experimental study, different virtual context models were considered. Eventually, an integral –  purely fictitious – design ‘environment’ was constructed in the computer, so that the workings of the proposed system and its components would be tested systematically.

A conscious choice was made for an in depth study, on a relatively modest scale, which would a certain amount of mutual involvement between designer and researcher, to confront the participants with the finer aspects of the proposed system in a relatively short time and to gather detailed data. A half dozen design professionals were invited to participate in a closely monitored experimental exercise.

The results of this study therefore do not offer straightforward, indisputable facts, to be considered representative for the design community as a whole, but indicate that the working methods of the individual designers – when discovering aspects of the site, developing and presenting proposals and reflecting on the qualities of represented designs – tend to vary considerably. For this reason the interactive representation system proved to be of value. Participants could express different view preferences, with more or less realistic image modes being used in different phases of their design developments, with varying experiences of situatedness. Some of the design professionals participants were very appreciative of the system’s opportunities, others tended to be more ‘set in their ways’.

The results of this experimental study indicate that there may particularly be opportunities for interface applications which are able to function interactively, offering individual designers –  as well as others involved in evaluating design proposals – a variety of tools with which to approach specific design artefacts in their changing contexts. Virtual models can play not only an important role as a ‘reminder’ for the designer but also to other parties playing an active role in the design and implementation processes. Interactive environment models are not only promising as exploration tools for existing sites, but could be valuable to test the impact of a design on its location. This could be especially interesting if the site is difficult or impossible to visit or as yet a virtual construction. In addition such an approach might be beneficial for objective comparison and evaluation of design proposals in competitions and in education as well as in on-line collaborative design projects where the context is still in the process of being developed.  

series thesis:PhD
type normal paper
email m.c.stellingwerff@bk.tudelft.nl
more http://www.bk.tudelft.nl/users/stelling/internet/
last changed 2005/03/02 21:40

_id cf2005_1_81_52
id cf2005_1_81_52
authors SUTER Georg, BRUNNER Klaus and MAHDAVI Ardeshir
year 2005
title Spatial Reasoning for Building Model Reconstruction Based on Sensed Object Location Information
source Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 403-412
summary The continuous collection of data on the state of facilities appears increasingly feasible due to advances in sensing technologies. In this context, we explore the application of tag-based location-sensing to reconstruct models of existing buildings. We describe tag-based building representations, which are complete under certain conditions for the automated conversion to boundary-based building representations. The latter have a rich structure and are useful for various construction-related applications. We describe and demonstrate with a system prototype how spatial reasoning methods facilitate the conversion process.
keywords location-sensing, spatial reasoning, building information modeling
series CAAD Futures
email georg.suter@tuwien.ac.at
last changed 2006/11/07 06:27

_id 2005_751
id 2005_751
authors Szalapaj, Peter
year 2005
title The Digital Design Process in Contemporary Architectural Practice
source Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 751-759
summary There is an increasing trend in contemporary architectural projects towards dependence upon digital processes for their organisation and technical evaluation of a range of design criteria. Digital representations are central not only to form generation and structural analysis, but also to the integration of fabrication and construction directly with the earlier design stages. It is important to bear in mind, however, that digital technology is only a means to an end which is the design process itself. Each technique of digital representation and analysis brings advantages and disadvantages to this process, and should therefore be described in these terms. It is becoming increasingly feasible to develop a rapid succession of distinct digital models, both geometric and dynamic, in early design stages. These can be tested and evaluated with respect to a range of analytical criteria, and the results of these analyses can affect further model development thus forming a cyclical process of 3-D digital model generation.
keywords Dynamic Modelling, Geometric Modelling, Surface Modelling, Parametric Representation, Digital Fabrication
series eCAADe
email p.szalapaj@sheffield.ac.uk
last changed 2012/11/23 18:17

_id caadria2005_b_4a_d
id caadria2005_b_4a_d
authors T. Thurow, D. Donath
year 2005
title Get the Surveying Building Data Into the CAAD System: A Realistic Approach for the Practice
source CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 2, pp. 171-180
summary The digital support of the planning process is a currently a central focus of our research and will be presented and discussed in this paper. Concepts and prototypes for the computer aided support of the planning process are being developed as part of a special research project “Construction and materials for the renovation of buildings”. The paper examines the flexible combination of different surveying techniques and geometric abstractions achieved with the help of geodesic computational adjustment methods. Selected aspects have been implemented and investigated as prototypes and the prototypes are described and discussed.
series CAADRIA
email torsten.thurow@informatik.uni-weimar.de, donath@archit.uni-weimar.de
last changed 2005/04/30 01:30

_id cf2005_2_31_60
id cf2005_2_31_60
authors TALBOTT Kyle
year 2005
title Integrating Generative Modelling and Design Process
source Learning from the Past a Foundation for the Future [Special publication of papers presented at the CAAD futures 2005 conference held at the Vienna University of Technology / ISBN 3-85437-276-0], Vienna (Austria) 20-22 June 2005, pp. 77-88
summary While researchers learn to generate design options with a computer, the question of how a designer interacts with these options remains largely unexcavated. This paper explores how a generative system should interact with a designer. It argues that limitations in human cognition require a designer to manage the complexity of his task with a creative thinking strategy called Perception-Imagination Overlay. To support this, a generative system should present a progression of contextual design “moves” rather than a collection of finished solutions. After validating a set of interface requirements, the paper presents an example interface. The paper concludes that the development of computational methods cannot be legitimately isolated from the development of an appropriate designer-system interaction, and that integrating these concerns might transform our conception of generative systems.
keywords human-computer interaction, generative design, creativity, design process, 3D modelling
series CAAD Futures
email ktalbott@uwm.edu
last changed 2005/05/05 05:06

_id caadria2005_b_4b_c
id caadria2005_b_4b_c
authors Tomohiro Fukuda, Atsuko Kaga, Ryuichiro Nagahama, Nobuyuki Shibano, Tsuyoshi Sasada, Yu-Tung Liu
year 2005
title The World’s Largest VR-Dome for Collaborative Design
source CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 2, pp. 203-213
summary This paper reports on the development of a new VR (Virtual Reality) system with the world’s largest hemispherical screen, which can display high immersive, life-size scale, stereoscopic images. A cluster of PCs is used in master-slave architecture, with 18 slave PCs for rendering left eye and right eye images, and the master for synchronizing the images for stereo view. Contents can be shared with a VR system operating on a notebook with a new VR system developed as part of the same VR toolkit. We apply the system to a real, collaborative architectural design project.
series CAADRIA
email fukuda@env.eng.osaka-u.ac.jp
last changed 2005/04/30 01:30

_id sigradi2005_773
id sigradi2005_773
authors Tramontano, Marcelo; Edson Salerno Junior
year 2005
title Beyond HCI: Colaboratives graphic interfaces.
source SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 773-777
summary This article intends to present a research work in process which targets the production of design principles for multi-users graphic interfaces, allowing the creation of dialog spaces for a communitarian purpose, using the knowledge from system-user and user-interface interaction and from semiotic and cognitive psychology. It blends studies in both technological and perceptive fields, focusing on interfaces production with a non-linear structure, with an associative navigability, mostly commanded by signs and graphic elements of easy comprehension. The research goal is to understand how to allow users to build an individualized portion of cyberspace, where dialogs can be established with other community members. This work is part of Nomads.usp, Center for Habitation and Ways of Living Studies - University of São Paulo, that studies and produces criteria to rethink nowadays spaces design, considering its recent history, the transformations occurred in families groups, and its behavior tendencies. [Full paper in Portuguese]
series SIGRADI
email tramont@sc.usp.br
last changed 2016/03/10 09:01

_id acadia05_200
id acadia05_200
authors Tsou, J.-Y., Chan Yi Lee, Mak Kwok Pui, Ru Xu Du, Liang Jian, Yeung Kim
year 2005
title Applying Scientific Simulation to Integrate Thermoelectric Conductor Module into Architectural Design – Smart Wall for Thermal Comfort
source Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 200-210
summary This paper presents the innovative architectural design concept, which is to integrate the new material and technology into the building design to achieve the thermal comfort and at the same time reduce the energy consumption of the building by making use of the renewable energy, including solar and wind energy. The system is developed based on the idea of regional thermal comfort in building. The advantage of the system is the environmental friendly approach, costless operation, reliability, flexibility, scalability and adaptability for the integration to the building design. With the design concept, we tried to do two application designs in two virtual sites. One is a badminton court for the 2008 Beijing Olympic Games and the other is a cooling pond in a shopping mall. We will introduce how computational simulation can contribute to the prediction of the performance of the design. We will also discuss how the computation simulation can help in the design optimization process. Through the development of the new design integration of the material to the building, we would like to feedback to the material industry to encourage further collaboration and development in the material enhancement, so that both industries and the society can benefit from the advancement.
series ACADIA
email kpmak@cuhk.edu.hk
last changed 2005/10/25 16:52

_id caadria2005_a_8b_b
id caadria2005_a_8b_b
authors Wingly Shih
year 2005
title VR-CAVE as a multimodal interaction environment
source CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 413-420
summary This research focused on building a software system on VR-CAVE for multiple users’ interaction with various media, alongside simultaneous communication amongst users. While all users interact with virtual objects in VR-CAVE concurrently, by means of several kinds of input device, including conventional mouse and keyboard, PDAs, mobile phones and laptops, users can communicate with each other through the most natural way at the same time. The system prototype was implemented and still in development for extension on the strength of supporting more input device and media formats. Further research would make VR-CAVE not only a representing tool, but a platform for design communication and evaluation, or a collaborative design environment.
series CAADRIA
email swingly@arch.nctu.edu.tw
last changed 2005/04/30 01:30

_id caadria2005_a_2a_c
id caadria2005_a_2a_c
authors Yasunobu Onishi, Homma Riken, Yuji Murakami, Mitsuo Morozumi
year 2005
title Techniques for a Planning Workshop Using A Place Information System
source CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 142-153
summary Planning workshops are known to provide important opportunities for citizen’s participation in environmental planning. The digital camera is a convenient tool for such workshops though participants still face difficulties in smooth sharing of information amongst themselves. The authors developed a prototype system for a planning workshop that applies the web-GIS technique, and devised techniques for the system-applied planning workshop through a case study. This paper discusses, first, an assumed procedure for place studies at a planning workshop; second, the functional features of the developed system; third, arrangements for the environment of the workshop; fourth, an experiment of the system use with an urban design workshop in which 91 students participated, forming 16 teams; and finally, assessment of the operational ability of the prototype and necessary refinements for in the next version.
series CAADRIA
email onishi@arch.kumamoto-u.ac.jp, homma@arch.kumamoto-u.ac.jp, ymura@ktmail.ktokai-u.ac.jp, moro@arch.kumamoto-u.ac.jp
last changed 2005/04/30 01:30

_id caadria2005_a_2b_d
id caadria2005_a_2b_d
authors Yeo Wookhyun, Yuda Yasuyuki, Fukuda Tomohiro, Kaga Atsuko, Sasada Tsuyoshi
year 2005
title Development of the Caadria Abstract Reviewer System
source CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 198-203
summary In this paper, I would like to present the method and system that I developed in the CAADRIA 2005 reviewer system. Along with the background and purpose of this system, I would like to show the problems that arose in the process of constructing and operating the system, that is to say, in practical application, and this will be followed by a description of the subsequent tasks for future reviewers of the system.
series CAADRIA
email yeo@env.eng.osaka-u.ac.jp
last changed 2005/04/30 01:30

_id sigradi2005_483
id sigradi2005_483
authors Abdelhameed, Wael
year 2005
title Digital-Media Impact on the Representation Capability of Architects
source SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 483-489
summary Architects draw to define design problems, to construct concepts, or to explore ideas. Representation not only connects various design activities and tasks, but also is utilized inside all these activities and tasks. Within the context of this research, the Design Capabilities of architects are defined as the skills used during the design process, including Conceptualization, Representation, Form Giving, Knowledge Building and Retrieving, and Decision-Making. Using representational techniques introduced by digital media during design development has altered what we can represent, perceive, and therefore conceive and imagine. Depending on primary data (a global questionnaire) and secondary data (synthesis of previous researches), the results of this investigation have substantiated that there has been a positive impact of digital media settings on the output of Representation capability of architects. The analysis reveals some detailed findings, which provide a better understanding of the subject matter.
series SIGRADI
email w_wel@yahoo.com
last changed 2016/03/10 08:47

_id caadria2005_a_7b_a
id caadria2005_a_7b_a
authors Abdullah, A.Q.M. ; Md. Emran Hossain, Md. Shabab Habib Khan
year 2005
title Digital Perception, Development and Presentation in Architecture: a study of Bangladesh with global context
source CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 255-267
summary In the recent past the computer has become an important tool in both the design and presentation media/method in architecture. In this paper digitalization in architectural practice and architectural education in both the global and Bangladesh contexts have been studied. A survey questionnaire was carried out to find how and to what extent available software are being used in Bangladesh for this purpose. Opinion, views, expectations of architects from leading architectural firms of Bangladesh were studied to understand the future prospect of this field in Bangladesh.
series CAADRIA
email abdullah@bracuniversity.ac.bd, emran@bracuniversity.ac.bd, jitul@vfemail.net
last changed 2007/07/23 05:08

_id cf2005_1_64_168
id cf2005_1_64_168
authors ACHTEN Henri
year 2005
title Resolving some Ambiguities in Real-time Design Drawing Recognition by means of a Decision Tree for Agents
source Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 311-320
summary In this paper, we present a theoretical study on automated understanding of the design drawing. This can lead to design support through the natural interface of sketching. In earlier work, 24 plan-based conventions of depiction have been identified, such as grid, zone, axial system, contour, and element vocabulary. These are termed graphic units. Graphic units form a good basis for recognition of drawings as they combine shape with meaning. We present some of the theoretical questions that have to be resolved before an implementation can be made. The contribution of this paper is: (i) identification of domain knowledge which is necessary for recognition; (ii) outlining combined strategy of multi-agent systems and online recognition; (iii) functional structure for agents and their organisation to converge on sketch recognition.
keywords multi-agent system, decision tree, pattern recognition, sketch
series CAAD Futures
email H.H.Achten@tue.nl
last changed 2006/11/07 06:27

For more results click below:

show page 0show page 1show page 2show page 3show page 4this is page 5show page 6show page 7show page 8show page 9show page 10... show page 27HOMELOGIN (you are user _anon_38790 from group guest) CUMINCAD Papers Powered by SciX Open Publishing Services 1.002