CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 41

_id ecaade2013_249
id ecaade2013_249
authors Araya, Sergio; Zolotovsky, Ekaterina; Veliz, Felipe; Song, Juha; Reichert, Steffen; Boyce, Mary and Ortiz, Christine
year 2013
title Bioinformed Performative Composite Structures
source Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 575-584
summary This ongoing investigation aims to learn from nature novel material organizations and structural systems in order to develop innovative architectural system. We developed a multidisciplinary approach, using scientific analysis and design research and prototyping. We focus on the study of a “living fossil” fish, whose armor system is so efficient it has remained almost unchanged for millions of years. We investigate its morphological characteristics, its structural properties, the assembly mechanisms and the underlying material properties in order to derive new principles to design new enhanced structural systems. We use micro computerized tomography and scanning electron microscopy to observe microstructures, parametric design to reconstruct the data into digital models and then several 3D printing technologies to prototype systems with high flexibility and adaptive capabilities, proposing new gradual material interfaces and transitions to embed performative capabilities and multifunctional potentials.
wos WOS:000340635300060
keywords Bioinformed; multi-material; composite; parametrics; performative design.
series eCAADe
type normal paper
email sergio.araya@uai.cl
last changed 2016/05/16 09:08

_id lasg_nearlivingarchitecture_2014_045
id lasg_nearlivingarchitecture_2014_045
authors Armstrong, Rachel
year 2014
title Potent Matter; The Dynamic Chemistries of Hylozoic Ground
source Near-Living Architecture; Work in Progress from The Hylozoic Ground Collaboration 2011 - 2013 [ISBN 978-1-926724-45-4 (pbk).--ISBN 978-1-926724-57-7 (epub).--ISBN 978-1-926724-58-4 (mobi)] Riverside Architectural Press: Toronto, Canada 2014 pp. 045 - 062
keywords Living Architecture Systems Group, living architecture, meshworks, metabolisms, kinetic, cybernetic, artificial intelligence, cognition, neuroscience, prototyping, diffusive, subtle phenomena, form-languge, chemistry, natural computing, affect, perception
email rachel.armstrong3@newcastle.ac.uk
last changed 2019/07/29 12:00

_id lasg_nearlivingarchitecture_2014_fulltext
id lasg_nearlivingarchitecture_2014_fulltext
authors Beesley, Philip [editor]
year 2014
title Euphoria and Dystopia
source Near-Living Architecture; Work in Progress from The Hylozoic Ground Collaboration 2011 - 2013 [ISBN 978-1-926724-45-4 (pbk).--ISBN 978-1-926724-57-7 (epub).--ISBN 978-1-926724-58-4 (mobi)] Riverside Architectural Press: Toronto, Canada 2014
keywords Living Architecture Systems Group, living architecture, meshworks, metabolisms, kinetic, cybernetic, artificial intelligence, cognition, neuroscience, prototyping, diffusive, subtle phenomena, form-languge, chemistry, natural computing, affect, perception
email philip.beesley@uwaterloo.ca
last changed 2019/07/29 12:00

_id lasg_nearlivingarchitecture_2014_035
id lasg_nearlivingarchitecture_2014_035
authors Beesley, Philip
year 2014
title Diffusive Prototyping
source Near-Living Architecture; Work in Progress from The Hylozoic Ground Collaboration 2011 - 2013 [ISBN 978-1-926724-45-4 (pbk).--ISBN 978-1-926724-57-7 (epub).--ISBN 978-1-926724-58-4 (mobi)] Riverside Architectural Press: Toronto, Canada 2014 pp. 035 - 044
keywords Living Architecture Systems Group, living architecture, meshworks, metabolisms, kinetic, cybernetic, artificial intelligence, cognition, neuroscience, prototyping, diffusive, subtle phenomena, form-languge, chemistry, natural computing, affect, perception
email philip.beesley@uwaterloo.ca
last changed 2019/07/29 12:00

_id lasg_nearlivingarchitecture_2014_008
id lasg_nearlivingarchitecture_2014_008
authors Beesley, Philip
year 2014
title Introduction
source Near-Living Architecture; Work in Progress from The Hylozoic Ground Collaboration 2011 - 2013 [ISBN 978-1-926724-45-4 (pbk).--ISBN 978-1-926724-57-7 (epub).--ISBN 978-1-926724-58-4 (mobi)] Riverside Architectural Press: Toronto, Canada 2014 pp. 008 - 034
keywords Living Architecture Systems Group, living architecture, meshworks, metabolisms, kinetic, cybernetic, artificial intelligence, cognition, neuroscience, prototyping, diffusive, subtle phenomena, form-languge, chemistry, natural computing, affect, perception
email philip.beesley@uwaterloo.ca
last changed 2019/07/29 12:00

_id sigradi2013_281
id sigradi2013_281
authors Braida Rodrigues de Paula, Frederico; Lara Scanapieco Barreto; Felipe Arlindo Silva; Fernando Lima; Vinícius Morais
year 2013
title Maquetes Híbridas: Diálogos Entre as Técnicas Tradicionais e as Tecnologias Digitais no Processo Projetual [Hybrid Models: Dialogues Between Traditional Techniques and Digital Technologies in the Design Process]
source SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 49 - 53
summary This article is about hybrid models, as a kind of three-dimensional representation emerged from of the possibilities of combining traditional techniques with digital technologies. The purpose is to reflect on the possibilities of production and applications of these types of hybrid models, highlighting them as recurring elements of design practice after the rise of new technologies of information and communication, and prototyping and digital manufacturing. By adopting the model as an object of research, we propose to expand the field of reflection on the incorporation of several digital technologies in the design process, specifically aspects of three-dimensional and graphical representation.
keywords Hybrid models; Digital technologies; Architecture and Urbanism
series SIGRADI
email frederico.braida@ufjf.edu.br
last changed 2016/03/10 08:47

_id sigradi2013_189
id sigradi2013_189
authors Bruscato, Underléa; Clariana Fischer Brendler; Felipe Schneider Viaro; Fábio Gonçalves Teixeira; Régio Pierre da Silva
year 2013
title Uso da Fabricação Digital e Prototipagem no Desenvolvimento do Projeto de Produto: Análises do Produto através de Simulações Digitais [Digital Manufacture and Rapid Prototyping in Product Design Development: Product Analysis through Digital Simulation]
source SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 459 - 463
summary The aim of this paper is to design a public facilitie using both digital manufacture and rapid prototyping design methods. These new technologies have been used in product design development by some ways: helping in the comprehension of complex geometries; used as tools for analyzing the design process, thus avoiding errors in the project. The analysis were carried out using virtual simulation tests and physical prototype in reduced scale. The prototype was manufactured using the 3D printer V-Flash in the Virtual Design Laboratory – UFRGS, where positive and negatives aspects were identified and described.
keywords Digital manufacture; Rapid prototyping; Virtual simulation; Product design; Urban facilities
series SIGRADI
email arq.leiab@gmail.com
last changed 2016/03/10 08:47

_id acadia13_061
id acadia13_061
authors Bruscia, Nicholas; Romano, Christopher
year 2013
title Material Parameters and Digitally Informed Fabrication of Textured Metals
source ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 61-68
summary The research represented in this paper proposes to reinvestigate the relationship between structure and appearance through a performative analysis of textured stainless steel, as verified through full-scale prototyping. The work takes a scientific design approach while incorporating a computational workflow that is informed by the material’s physical parameters, and draws a connection between the scales of molecular composition to large-scale geometric systems.Furthermore, the work attempts to provide evidence for thin-gauge textured metals as a high performance and adaptive material, by identifying structural rigidity and particular specular quality as inherent characteristics born from the texturing process. In addition, through close collaboration with the sponsoring manufacturer of textured stainless steel, we are able to gain access to material expertise and large-scale fabrication equipment not readily available to designers, thereby forging a mutually beneficial relationship surrounding the research.
keywords Next Generation Technology, Architecture and Manufacturing, Material Research, Material Science, Digital Fabrication, Rigidized Metal, Parametric Modeling
series ACADIA
type Normal Paper
email christopher.romano@gmail.com
last changed 2014/01/11 08:13

_id lasg_nearlivingarchitecture_2014_097
id lasg_nearlivingarchitecture_2014_097
authors Carroll, Becky; Rob Gorbet and Lucinda Presley
year 2014
title It Lives! Promoting Creative and Innovation Thinking in Education
source Near-Living Architecture; Work in Progress from The Hylozoic Ground Collaboration 2011 - 2013 [ISBN 978-1-926724-45-4 (pbk).--ISBN 978-1-926724-57-7 (epub).--ISBN 978-1-926724-58-4 (mobi)] Riverside Architectural Press: Toronto, Canada 2014 pp. 097 - 110
keywords Living Architecture Systems Group, living architecture, meshworks, metabolisms, kinetic, cybernetic, artificial intelligence, cognition, neuroscience, prototyping, diffusive, subtle phenomena, form-languge, chemistry, natural computing, affect, perception
last changed 2019/07/29 12:00

_id ecaade2013_126
id ecaade2013_126
authors Castro e Costa, Eduardo and Duarte, José Pinto
year 2013
title Tableware Shape Grammar
source Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 635-644
summary Mass customization is pointed as a means of improving a company’s competitiveness, which is an essential trait in Europe’s economic situation of today. This paper reports a mockup implementation of the mass customization paradigm to ceramic tableware design, through the use of shape grammars, parametric modelling and rapid prototyping. Focus is emphasized on the initial development of a parametric shape grammar as a design system, operating on curved surfaces and solids. Mapping operations are suggested for dealing with the formal complexity of these shapes. This initial academic experiment poses as a first step into the development of a mass customization system that is expected to meet industry standards.
wos WOS:000340643600066
keywords Mass customization; ceramic tableware; generative design; shape grammars; rapid prototyping.
series eCAADe
email castroecosta@fa.utl.pt
last changed 2016/05/16 09:08

_id cf2013_159
id cf2013_159
authors Celani, Gabriela; Vilson Zattera, Marcelo Fernandes de Oliveira, and Jorge Vicente Lopes da Silva
year 2013
title “Seeing” with the Hands: Teaching Architecture for the Visually-Impaired with Digitally-Fabricated Scale Models
source Global Design and Local Materialization[Proceedings of the 15th International Conference on Computer Aided Architectural Design Futures / ISBN 978-3-642-38973-3] Shanghai, China, July 3-5, 2013, pp. 159-166.
summary Accessibility of information for the visually-impaired has greatly benefited from information and communication technologies (ICT’s) in the past decades. However, the interpretation of images by the blind still represents a challenge. Bidimensional representations can be understood by those who have seen at least sometime in their lives but they are too abstract for those with congenital blindness, for whom three-dimensional representations are more effective, especially during the conceptualization phase, when children are still forming mental images of the world. Ideally, educators who work with the visually-impaired should be able to produce custom 3D models as they are needed for the explanation of concepts. This paper presents an undergoing project that aims at developing a protocol for making 3D technologies technically and economically available to them.
keywords Tactile models, rapid prototyping, architectural concepts
series CAAD Futures
email celani@fec.unicamp.br
last changed 2014/03/24 06:08

_id lasg_nearlivingarchitecture_2014_073
id lasg_nearlivingarchitecture_2014_073
authors Derix, Christian; Lucy Helme and ?smund Izaki
year 2014
title Anticipating Behaviours
source Near-Living Architecture; Work in Progress from The Hylozoic Ground Collaboration 2011 - 2013 [ISBN 978-1-926724-45-4 (pbk).--ISBN 978-1-926724-57-7 (epub).--ISBN 978-1-926724-58-4 (mobi)] Riverside Architectural Press: Toronto, Canada 2014 pp. 073 - 084
keywords Living Architecture Systems Group, living architecture, meshworks, metabolisms, kinetic, cybernetic, artificial intelligence, cognition, neuroscience, prototyping, diffusive, subtle phenomena, form-languge, chemistry, natural computing, affect, perception
last changed 2019/07/29 12:00

_id caadria2013_001
id caadria2013_001
authors Doelling, Max C. and Ben Jastram
year 2013
title Daylight Prototypes: From Simulation Data to Four-Dimensional Artefact-Physical Metrics  Models in Sustainable Design Education
source Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 159-168
summary The increasing use of building performance simulation in architectural design enriches digital models and derived prototyping geometries with performance data that makes them analytically powerful artefacts serving sustainable design. In our class “Parametric Design”, students perform concurrent thermal and daylight optimization during the architectural ideation process, employing digital simulation tools, and also utilize rapid prototyping techniques to produce process artefacts and whole-building analysis models with climate-based day-light metrics physically embedded. Simulation metrics are merged with prototyping geometries to be output on a colour-capable Zprinter; the resultant hybrid artefacts simultaneously allow three-dimensional formal as well as whole-year daylight performance evaluation, rendering analysis scope four-dimensional. They embody a specific epistemological type that we compare to other model instances and posit to be an example of multivalent representation, a formal class that aids knowledge accretion in  workflows and allows designers to gain a physically reframed understanding of geometry-performance relationships.
wos WOS:000351496100016
keywords Rapid prototyping, Building performance modelling, Daylight simulation, Physical data models, Design representation 
series CAADRIA
email max.freq@gmail.com
last changed 2016/05/16 09:08

_id caadria2013_015
id caadria2013_015
authors Dritsas, Stylianos and Kang Shua Yeo
year 2013
title Undrawable Architecture – Digital Workflows for the Conservation of Heritage Buildings and the  Discovery of Digital Tectonic
source Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 833-842
summary This paper presents a datacentric perspective to historical building conservation using digital media. In particular we explore a workflow based on large volumes digital data acquired via 3D scanning technology, virtual restoration using 3D modelling and physical artefact reconstruction using 3D printing technology. We offer an alternative perspective in contrast to the prevalent approach of reverse engineering or geometric rationalization via parametric design technology; highlight the research and design opportunities as well as the challenges of the approach. 
wos WOS:000351496100086
keywords Digital conservation, 3D scanning, Rapid prototyping 
series CAADRIA
email dritsas@sutd.edu.sg
last changed 2016/05/16 09:08

_id cf2013_118
id cf2013_118
authors Dritsas, Stylianos and Mark Goulthorpe
year 2013
title An Automated Robotic Manufacturing Process: For the Thermoplastic Panel Building Technology
source Global Design and Local Materialization[Proceedings of the 15th International Conference on Computer Aided Architectural Design Futures / ISBN 978-3-642-38973-3] Shanghai, China, July 3-5, 2013, pp. 118-129.
summary This paper presents the design-computation digital fabrication research for a thermoplastic panel technology for housing applications; a high-performance, low-cost building product based on parametric design methodology, glass fiber reinforced composite materials, and numerically controlled robotic fabrication processes. We present a highly integrated schematic design to production workflow, and discuss the potential and challenges of robotic prototyping and fabrication.
keywords Digital Fabrication, Architectural Robotics, Computer Aided Manufacturing, Building Composites, Thermoplastic Manufacturing
series CAAD Futures
email dritsas@gmail.com
last changed 2014/03/24 06:08

_id sigradi2013_286
id sigradi2013_286
authors Howe, Nathan
year 2013
title FluidScape: Research in Parametric Concrete Formwork
source SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 405 - 409
summary Given the piecemeal nature of concrete formwork, the phenomenon of the monolithic result relies on elegant detailing, material choice, and formal continuity. Creating complex form out of concrete poses an intriguing problem, where these disparate constructive elements must be dynamic and flexible. This paper describes the design process from conception to prototyping for a public spray park competition project. The challenges inherent in the proposed forms included subtle reveals and ledges for water to flow down. Achieving the desired finish for the concrete requires a precise, digitally-generated form, particular materials and fabrication sequence. The project design and fabrication gives parametric control to Computer Numerically Controlled (CNC) fabrication tools for an output of fluid form.
keywords Parametric; Digital fabrication; Scripting; Concrete; Formwork
series SIGRADI
email nhowe@ksu.edu
last changed 2016/03/10 08:53

_id ecaade2013_006
id ecaade2013_006
authors Junk, Stefan and Côté, Samantha
year 2013
title New Methods for the Rapid Prototyping of Architectural Models
source Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 397-403
summary Various Rapid Prototyping methods have been available for the production of physical architectural models for a few years. This paper highlights in particular the advantages of 3D printing for the production of detailed architectural models. In addition, the current challenges for the creation and transfer of data are explained. Furthermore, new methods are being developed in order to improve both the technical and economic boundary conditions for the application of 3DP. This makes the production of models with very detailed interior rooms possible. The internal details are made visible by dividing the complex overall model into individual models connected by means of an innovative plug-in system. Finally, two case studies are shown in which the developed methods are applied in order to implement detailed architectural models. Additional information about manufacturing time and costs of the architectural models in the two case studies is given.
wos WOS:000340643600040
keywords Architectural model, CAAD, Rapid Prototyping, 3D printing, architectural detail.
series eCAADe
email stefan.junk@hs-offenburg.de
last changed 2016/05/16 09:08

_id caadria2018_134
id caadria2018_134
authors Kawabe, Akihiro and Watanabe, Shun
year 2018
title An Analysis of Mixed Land Use Toward Designing the Compact City
source T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 493-502
summary Applying the method of "Land-Use Mix" (Amindabari et al. (2013)) and Focusing on changes in highly mixed land use areas within an extensive survey area and detailed analytical unit, the analysis in this study revealed some trends of distribution of mixed land use areas and their declining patterns in the eastern part of Saitama Prefecture, Japan. For example, among the changing land use patterns of Highly-Mixed-Points-as-of-1994, the pattern that a decreasing mixture index was associated with increasing residential land and decreasing commercial land occurred most often, and the points that changed with that pattern accounted for about 32% of all the Highly Mixed Points, and about 51% of the decrease in mixture index points.
keywords Metropolitan Form Analysis; Land-Use Mix; GIS; Mixed land use; Compact City
series CAADRIA
email s1720498@s.tsukuba.ac.jp
last changed 2018/05/17 07:08

_id cf2013_267
id cf2013_267
authors Kim, Kyoung-Hee and Seung-Hoon Han
year 2013
title Integrated Design Process: Sustainable Fa¸cade Fabrication
source Global Design and Local Materialization[Proceedings of the 15th International Conference on Computer Aided Architectural Design Futures / ISBN 978-3-642-38973-3] Shanghai, China, July 3-5, 2013, pp. 267-273.
summary Interoperability and integration between design, analysis and fabrication in architectural practice allow building façade systems to be increasingly complex and non-standard. As customized building façade systems increase in contemporary buildings, it is important to adopt the integrated design process that aids problem solving and design-making in façade design. The primary goal of this study is to explore the integrated design process that incorporates building information modeling and parametric performance analysis tools in order to understand sustainability opportunities in sustainable façade fabrication. The integration of building information modeling (BIM) and parametric performance analysis tools poses a unique design process whose resolution has the potential to improve sustainability in built environment and façade fabrication efficiency. This paper uses an academic design research project, the Reading Pavilion located in the UNC Charlotte campus, as a case study to investigate the integrated design process of a building façade system, which was supported by quantitative data using BIM, parametric performance analysis, and rapid prototyping tools.
keywords Integrated design process, building information modeling, parametric performance analysis, high performance façade.
series CAAD Futures
email kkim33@uncc.edu
last changed 2014/03/24 06:08

_id caadria2014_099
id caadria2014_099
authors Koh, Immanuel
year 2014
title Generative-Glass: Prototyping Generative Architectural Systems with Artisan’s Glass-Blowing and Automated Digital Fabrication Techniques
source Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 389–398
summary This paper aims to investigate the ways in which the traditional processes of glassblowing techniques could be incorporated with contemporary generative design processes in the realization of new novel architectural systems. Pedagogical issues on how such prototyping processes could be better integrated within architectural education are also discussed. With the use of algorithmic design methodology to generate/visualize the components assembled in multitudes and digital fabrication machineries to produce the necessary moulds/jigs/tools/connection joints, a series of 5 different glass prototypes have been actualized at the scale of 1:1 or otherwise. The work is the direct outcome of a new programme founded and directed by the author as part of the Architectural Association (AA) School of Architecture‘s Visiting School in 2013. Part 1 briefly introduces the specific agenda and how the corresponding structure of the programme is designed to facilitate the glass research work done concurrently at the digital fabrication laboratory and glassblowing studio. Part 2 would systematically discuss in detail the design of each of the 5 main glass prototypes made, presented alongside photographs and diagrams to illustrate the prototypes’ respective assembly and fabrication logics. Part 3 would evaluate the work done and project plans for the next iteration of the research in 2014.
keywords Glass; Digital Fabrication; Generative Design; Traditional Crafts
series CAADRIA
email immanuel.koh@aaschool.ac.uk
last changed 2014/04/22 08:23

For more results click below:

this is page 0show page 1show page 2HOMELOGIN (you are user _anon_37635 from group guest) CUMINCAD Papers Powered by SciX Open Publishing Services 1.002