CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 6 of 6

_id ecaade2014_096
id ecaade2014_096
authors Daniel Norell and Einar Rodhe
year 2014
title Erratic - The Material Simulacra of Pliable Surfaces
source Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 145-152
summary This paper examines how designers can invigorate designs with a sense of liveliness and indeterminacy through manipulation of pliable materials. Two approaches to material manipulation are defined and juxtaposed in the paper: The control associated with Frei Otto's elegantly tensioned membranes and the noise associated with Sigurd Lewerentz's intensely material brick walls. These historical approaches become pertinent in relation to current opportunities offered by material simulation software in architecture. Simulation may be used to increase control over the materialization of design, but is at the same time a way to introduce the noise of real-time, real-world experiments into digital design. The paper presents this discussion in parallel with documentation of the research project 'Erratic', a recent installation carried out by the authors' practice Norell/Rodhe. Constructed from polyurethane cold foam, the project combines analogue experiments with digital simulations to target architectural qualities like mass, figuration and relief.
wos WOS:000361385100015
keywords Control; material manipulation; material simulation; noise; pliable surfaces
series eCAADe
email dnorell@kth.se
last changed 2016/05/16 09:08

_id ecaade2008_022
id ecaade2008_022
authors Einar Larsen, Knut; Schindler, Christoph; Scheurer, Fabian; Stori, Simen
year 2008
title The Ringve Botanical Garden Viewing Platform
source Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 783-790
summary Since 2006 the Faculty of Architecture of the Norwegian University of Science and Technology (NTNU) has organized the ‘1-2-TRE’ workshops on digital timber fabrication. The annual one-semester courses explore the possibilities and conditions of file-to-factory processes in cooperation with professional carpentries. The 2007 course focused on adding varied simple elements to a complex whole. Within a full semester course, a permanent viewing platform for the Botanical Garden of Trondheim was designed, produced and built by the participating students.
keywords Teaching project 1:1, Industry cooperation, Digital fabrication, CAD/CAM, Ringve Botanical Garden Viewing Platform
series eCAADe
email knut.e.larsen@ntnu.no, schindler@designtoproduction.com
last changed 2008/09/09 13:55

_id ecaade2007_005
id ecaade2007_005
authors Larsen, Knut Einar; Scheurer, Fabian; Schindler, Christoph; Stori, Simen
year 2007
title The Trondheim Camera Obscura
source Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 51-58
summary This paper discusses a project where we, together with a group of 15 graduate students, designed, produced, and built small timber structure (a Camera Obscura) in Trondheim, Norway. The project was part of a full semester course at the Faculty of Architecture of the Norwegian University of Science and Technology (NTNU). The main purpose of the course was to explore the possibilities of prefabrication in timber construction based on file-to-factory processes (digital fabrication). Moreover, we wished to give the students the experience of building a permanent structure in 1:1.
keywords Teaching project 1:1, industry cooperation, digital fabrication, CAD-CAM, camera obscura
series eCAADe
email knut.e.larsen@ark.ntnu.no, schindler@designtoproduction.com
last changed 2007/09/16 15:55

_id ijac20086402
id ijac20086402
authors Larsen, Knut Einar; Schindler, Christoph
year 2008
title From Concept to Reality: Digital Systems in Architectural Design and Fabrication
source International Journal of Architectural Computing vol. 6 - no. 4, 397-413
summary One of the challenges for today's architectural designers is the establishment of continuous digital processes between design and fabrication. To achieve this, designers need to acquire knowledge about the production and the methods and tools involved. Two case studies organized at the Norwegian University of Science and Technology (NTNU) on digital timber fabrication investigate the new field of collaboration between architectural designers and fabricators. The studies demonstrate the design potential of acquiring insights into the fabricators' software and digital production machinery and reflect contemporary fabrication technology in formal expression. We identified two different approaches to formal exploration that we defined as "sophistication of the detail" and "variation of the element".
series journal
last changed 2009/03/03 06:48

_id 2005_679
id 2005_679
authors Steinø, Nicolai and Veirum, Niels Einar
year 2005
title A Parametric Approach to Urban Design
source Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 679-686
summary It is the thesis of this paper, that the application of a parametric design approach to urban design has great potentials for improving the systematic testing and subsequent argumentation for urban design proposals. Parametric design has so far mainly been applied to engineering. However, the ‘components’ constituting an urban design also share similarities that may be defined parametrically. Aspects such as density, use, mix, form, space, and typology may all be defined parametrically. By doing so, it is possible to not only perform a systematic de-sign process, but also to evaluate the pros and cons of scenarios with different parametric settings. On the basis of a theoretical discussion, followed by a case study in the form of a student workshop, the paper will discuss the nature and scope of parametric urban design, draw some preliminary conclusions, and outline some possible perspectives for the development of parametric urban design.
keywords Parametric, Parameters, Urban Design, Methodology, Workshop, CAD
series eCAADe
email steino@aod.aau.dk
last changed 2012/11/23 18:17

_id 2006_022
id 2006_022
authors Veirum, Niels Einar; Mogens Fiil Christensen and Mikkel Mayerhofer
year 2006
title Hybrid Experience Space for Cultural Heritage Communication
source Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 22-30
summary Cultural heritage institutions like the museums are challenged in the global experience society. On the one hand it is more important than ever to offer “authentic” and geographically rooted experiences at sites of historic glory and on the other hand the audience’s expectations are biased by daily use of experience products like computer-games, IMAX cinemas and theme parks featuring virtual reality installations. “It’s a question of stone-axe displays versus Disney-power installations” as one of the involved museum professionals point it, “but we don’t want any of these possibilities”. The paper presents an actual experience design case in Zea Harbour, Greece dealing with these challenges using hybrid experience space communicating cultural heritage material. Archaeological findings, physical reconstructions and digital models are mixed to effectively stage the interactive experience space. The Zea Case is a design scenario for the Museum of the Future showing how Cultural Heritage institutions can reinvent the relation to the visitor and the neighbourhood. While Hybrid Experience Space can be used for Cultural Heritage Communication in traditional exhibitions we have reached for the full potential of on-site deployment as a hybrid experience layer using Google Earth and mobile technology.
keywords Hybrid Experience Space; Cultural Heritage Communication
series eCAADe
email nev@aod.aau.dk
last changed 2006/08/16 16:54

No more hits.

HOMELOGIN (you are user _anon_11323 from group guest) CUMINCAD Papers Powered by SciX Open Publishing Services 1.002