CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 42

# Author Citation Select
1. Abdelmohsen, Sherif M. (2013) Reconfiguring Architectural Space using Generative Design and Digital Fabrication: A Project Based Course

SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 391 - 395 http://papers.cumincad.org/cgi-bin/works/Show?sigradi2013_215
2. Abdelmohsen, Sherif M. (2014) An Inquiry into Designing in Context using Generative Systems

International Journal of Architectural Computing vol. 12 - no. 4, 477-494 http://papers.cumincad.org/cgi-bin/works/Show?ijac201412407
3. Araya, Sergio (2008) Algorithmic Transparency

First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 329-340 http://papers.cumincad.org/cgi-bin/works/Show?cdc2008_329
4. Asterios Agkathidis and Tuba Kocaturk (2014) Deceptive Landscape Installation - Algorithmic patterning strategies for a small pavilion

Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 71-79 http://papers.cumincad.org/cgi-bin/works/Show?ecaade2014_022
5. Aºut, Serdar and Meijer, Winfried (2016) FlexiMold: Teaching Numeric Control through a Hybrid Device

Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 321-328 http://papers.cumincad.org/cgi-bin/works/Show?ecaade2016_077
6. Bernal, Marcelo; Yi-Luen Do, Ellen (2008) Variation from Repetition

Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 791-798 http://papers.cumincad.org/cgi-bin/works/Show?ecaade2008_115
7. Celento, David and Del Harrow (2008) CeramiSKIN: Biophilic Topological Potentials for Microscopic and Macroscopic Data in Ceramic Cladding

First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 65-76 http://papers.cumincad.org/cgi-bin/works/Show?cdc2008_065
8. CHOR-KHENG LIM, CHING-SHUN TANG, WEI-YEN HSAO, JUNE-HAO HOU, YU-TUNG LIU (2006) NEW MEDIA IN DIGITAL DESIGN PROCESS: Towards a standardize procedure of CAD/CAM fabrication

CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 597-599 http://papers.cumincad.org/cgi-bin/works/Show?caadria2006_597
9. Dritsas, Stylianos, Chen, Lujie and Sass, Lawrence (2017) Small 3D Printers / Large Scale Artifacts - Computation for Automated Spatial Lattice Design-to-Fabrication with Low Cost Linear Elements and 3D Printed Nodes

P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 821-830 http://papers.cumincad.org/cgi-bin/works/Show?caadria2017_069
10. Duarte, José P., Caldas, Luisa G. and Rocha, João (2004) Free-form Ceramics - Design and Production of Complex Architectural Forms with Ceramic Elements

Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 174-183 http://papers.cumincad.org/cgi-bin/works/Show?2004_174
11. Fischer, Thomas and Christiane M. Herr (2016) Parametric Customisation of A 3D Concrete Printed Pavilion

Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 549-558 http://papers.cumincad.org/cgi-bin/works/Show?caadria2016_549
12. Goldberg, Sergio Araya (2005) Designing Continuous ComplexCurved Structures to be Fabricated from Standard Flat Sheets

SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 114-119 http://papers.cumincad.org/cgi-bin/works/Show?sigradi2005_114
13. Goldberg, Sergio Araya (2006) Computational Design of Parametric Scripts for Digital Fabrication of Curved Structures

International Journal of Architectural Computing vol. 4 - no. 3, 99-117 http://papers.cumincad.org/cgi-bin/works/Show?ijac20064307
14. Górczy_ski, Micha_; Rabiej, Jan (2011) Digital Master Builder: From ‘Virtual’ Conception to ‘Actual’ Production through Information Models

RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.412-420 http://papers.cumincad.org/cgi-bin/works/Show?ecaade2011_026
15. Hadilou, Arman (2014) Flexible Formwork: A methodology for casting funicular structures

Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 345-352 http://papers.cumincad.org/cgi-bin/works/Show?ascaad2014_027
16. Kalantar, Negar, Borhani, Alireza and Akleman, Ergun (2016) Nip and Tuck: A Simple Approach to Fabricate Double-Curved Surfaces with 2D Cutting

Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 335-344 http://papers.cumincad.org/cgi-bin/works/Show?ecaade2016_165
17. Kaufmann, Stefan; Petzold, Frank (2012) Cybernetic models in building fabrication. A three stage training approach to digital fabrication in architecture

SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 243-245 http://papers.cumincad.org/cgi-bin/works/Show?sigradi2012_153
18. KENFIELD GRIFFITH, LARRY SASS (2006) COMPUTING & MATERIALIZING NON-UNIFORM SHAPES: An evolutionary approach to generate and digital fabricate non-uniform masonry walls

CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 227-235 http://papers.cumincad.org/cgi-bin/works/Show?caadria2006_227
19. Klinger, Kevin R. (2007) Information Exchange in Digitally Driven Architecture [El intercambio de información en arquitectura generada digitalmente]

SIGraDi 2007 - [Proceedings of the 11th Iberoamerican Congress of Digital Graphics] México D.F. - México 23-25 October 2007, pp. 300-304 http://papers.cumincad.org/cgi-bin/works/Show?sigradi2007_af53
20. Lostritto, Carl (2010) Computation Without Computers

CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 135-144 http://papers.cumincad.org/cgi-bin/works/Show?ascaad2010_135

For more results click below:

this is page 0show page 1show page 2HOMELOGIN (you are user _anon_438657 from group guest) CUMINCAD Papers Powered by SciX Open Publishing Services 1.002