CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

authors Lorenc, S.J. and Bernold, L.E.
year 1998
title Excavator-mounted ordnance locating system using electromagnetic sensing technology
source Automation in Construction 7 (4) (1998) pp. 243-258
summary There are in excess of 20 million acres of bomb and artillery ranges under the control of the Department of Defense (DoD). Each year some 800,000 to 2,000,000 km2 are turned over to civilian (private or commercial) use. Some of this land is contaminated with buried unexploded ordnance (UXO). These UXOs present a safety hazard and raise many environmental concerns. In addition to inaccurate locating, one of the most difficult aspects for the operator of an excavator is the inability to see the target ordnance while it is covered with soil and debris. This paper presents a system which is mounted to the arm of an excavator and is capable of detecting a buried UXO located in the path of an excavator's bucket. Also, the system is able to determine the precise location of the ordnance relative to the excavator's bucket. This information will allow the operator not only to avoid striking the ordnance during the digging operation, but also to expose the object by removing the soil around it. This technology is also capable of locating small UXO which can be buried within the spoil material. This technology has the potential to result in savings of millions of dollars in operating costs and prevent the damage or loss of equipment.
series journal paper
more http://www.elsevier.com/locate/autcon
references Content-type: text/plain
last changed 2003/05/15 19:22
HOMELOGIN (you are user _anon_45696 from group guest) Works Powered by SciX Open Publishing Services 1.002