CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References
id acadia19_360
authors Dackiw, Jean-Nicolas Alois; Foltman, Andrzej; Garivani, Soroush; Kaseman, Keith; Sollazzo, Aldo
year 2019
title Cyber-physical UAV Navigation and Operation
source ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 360-367
summary The purpose of this paper is to present a work in progress pertaining to drone pose estimation and flight calibration. This paper intends to underline the increasing importance of determining alternative path planning instruments through accurate localization for Unmanned Aerial Vehicles (UAVs) with the purpose of achieving complex flight operations for the emerging applications of autonomous robotics in surveying, design, fabrication, and on-site operations. This research is based on the implementation of novel technologies such as Augmented Reality (AR), Robot Operating System (ROS), and computational approaches to define a drone calibration methodology, leveraging existing methods for drone path planning. Drones are equipped with measurement systems to provide geo-location and time information such as onboard Global Positioning System (GPS) sensors, and Inertial Measurement Units (IMU). As stated in previous research, to increase navigation capabilities, measurements and data processing algorithms have a critical role (Daponte et al. 2015). The outcome of this work in progress showcases valuable results in calculating and assessing accurate positioning for UAVs, and developing data exchanges in transmission, reception, and tracking.
series ACADIA
type normal paper
email jeannicolas.alois.dackiw@iaac.net
full text file.pdf (3,243,598 bytes)
references Content-type: text/plain
Details Citation Select
100%; open Augugliaro, Frederico, Sergei Lupashin, Michael Hamer, Cason Male, Markus Hehn, Mark W. Mueller, Jan Sebastian Willmann, Fabio Gramazio, Matthias Kohler, and Raffaello D’Andrea. (2014) Find in CUMINCAD The Flight Assembled Architecture Installation: Cooperative Construction with Flying Machines , IEEE Control Systems 34 (4): 46–64

100%; open Chakrabarty, Anjan, Robert Morris, Xavier Bouyssounouse, and Rusty Hunt. (2016) Find in CUMINCAD Autonomous Indoor Object Tracking with the Parrot AR.Drone , 2016 International Conference on Unmanned Aircraft Systems (ICUAS), 25–30. Arlington, VA, USA: IEEE

100%; open Chaltiel, Stephanie, Maite Bravo, Sebastien Goessens and Pierre Latteur. (2018) Find in CUMINCAD Dry and Liquid clay mix drone spraying for Bioshotcrete , Proceedings of IASS Annual Symposia, IASS 2018 Boston Symposium: Reimagining Material and Design, 1-8. Boston: International Association for Shell and Spatial Structures (IASS)

100%; open Daponte, Pasquale, Luca De Vito, Gianluca Mazzilli, Francesco Picariello, Sergio Rapuano, and Maria Riccio. (2015) Find in CUMINCAD Metrology for Drone and Drone for Metrology: Measurement Systems on Small Civilian Drones , 2015 IEEE Metrology for Aerospace (MetroAeroSpace), 306–11. Benevento, Italy: IEEE

100%; open Faessler, Matthias, Flavio Fontana, Christian Forster, Elias Mueggler, Matia Pizzoli, and Davide Scaramuzza. (2016) Find in CUMINCAD Autonomous, Vision-Based Flight and Live Dense 3D Mapping with a Quadrotor Micro Aerial Vehicle: Autonomous, Vision-Based Flight and Live Dense 3D Mapping , Journal of Field Robotics 33 (4): 431–50

100%; open Felbrich, Benjamin, James Solly, Nikolas Früh, Lauren Vasey,vMarshall Prado, Jan Knippers, Saman Saffarian, and Achim Menges. (2017) Find in CUMINCAD An Integrative Design Process Utilising an Autonomous UAV and Industrial Robots for the Fabrication of Long-Span Composite Structures , ACADIA 17: Disciplines & Disruption; Proceedings of the 37th Annual Conference of the Association for Computer Aided Design Architecture, edited by T. Nagakura, S. Tibbits, C. Mueller, 248-259. Cambridge: Acadia Publishing Company

100%; open Gabdullin, Aidar, Grigory Shvedov, Mikhail Ivanou, and Ilya Afanasyev. (2018) Find in CUMINCAD Analysis of Onboard Sensor-Based Odometry for a Quadrotor UAV in Outdoor Environment , Proceedings of International Conference on Artificial Life and Robotics 23 (February): 196–99

100%; open Gao, Xiang, Rui Wang, Nikolaus Demmel, and Daniel Cremers. (2018) Find in CUMINCAD LDSO: Direct Sparse Odometry with Loop Closure , ArXiv:1808.01111 [Cs], August

100%; open Hunt, Graham, Faidon Mitzalis, Talib Alhinai, Paul A Hooper, and Mirko Kovac. (2014) Find in CUMINCAD 3D Printing with Flying Robots , 2014 IEEE International Conference on Robotics and Automation (ICRA), 4493–99. Hong Kong, China: IEEE

100%; open Mirjan, Ammar, Federico Augugliaro, Raffaello D’Andrea, Fabio Gramazio, and Matthias Kohler. (2016) Find in CUMINCAD Building a Bridge with Flying Robots , Robotic Fabrication Architecture, Art and Design 2016, edited by Dagmar Reinhardt, Rob Saunders, and Jane Burry, 34–47. Cham: Springer International Publishing

100%; open Rizzo, Carlos, Pedro Cavestany, François Chataigner, Marcel Soler, German Moreno, Daniel Serrano, Francisco Lera, and Jose Luis Villarroel. (2018) Find in CUMINCAD Wireless Propagation Characterization of Underground Sewers Towards Autonomous Inspections with Drones , ROBOT 2017: Third Iberian Robotics Conference, edited by Anibal Ollero, Alberto Sanfeliu, Luis Montano, Nuno Lau, and Carlos Cardeira, 694: 849–60. Cham: Springer International Publishing

100%; open Stuart-Smith, Robert. (2016) Find in CUMINCAD Behavioural Production: Autonomous Swarm-Constructed Architecture , Architectural Design 86 (2): 54–59

100%; open Stumberg, Lukas von, Patrick Wenzel, Qadeer Khan, and Daniel Cremers. (2019) Find in CUMINCAD GN-Net: The Gauss-Newton Loss for Deep Direct SLAM , ArXiv:1904.11932 [Cs], April

100%; open Tatum, Mark C., and Junshan Liu. (2017) Find in CUMINCAD Unmanned Aerial Vehicles in the Construction Industry , Procedia Engineering 196: 167–75

100%; open Wood, Dylan, Maria Yablonina, Miguel Aflalo, Jingcheng Chen, Behrooz Tahanzadeh, and Achim Menges. (2019) Find in CUMINCAD Cyber Physical Macro Material as a UAV [Re]Configurable Architectural System , Robotic Fabrication Architecture, Art and Design 2018, edited by Jan Willmann, Philippe Block, Marco Hutter, Kendra Byrne, and Tim Schork, 320–35. Cham: Springer International Publishing

last changed 2019/12/18 08:03
pick and add to favorite papersHOMELOGIN (you are user _anon_354574 from group guest) CUMINCAD Papers Powered by SciX Open Publishing Services 1.002