CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

id caadria2017_104
authors Lu, Xiao, Dounas, Theodoros, Spaeth, Benjamin, Bissoonauth, Chitraj and Galobardes, Isaac
year 2017
title Robotic Simulation of Textile as Concrete Reinforcement and Formwork
source P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 863-872
summary New possibilities of concrete constructions in architecture, the traditional formwork can be gradually replaced by the use of flexible textile. At the same time textile reinforcement combined with fabric formwork, introduces an innovative integrated solution in the fabrication of concrete. Based on a simple understanding of the textile weaving and knitting techniques, this project concentrates on the architectural production and the structural optimization of the textile as both concrete reinforcement and formwork. Furthermore, we present a robotic simulation of the process that develops using a series of computational experiments to research the sequence of weaving and/or knitting. Through the computational process and the design simulations, the research is firmly rooted in analog and digital exploration of material and its implementation in architecture, with particular emphasis on the convergence of robotics and computation. Note that the paper deals mainly with the software and weaving simulation as part of a larger research project, without dealing with the production of physical artefacts.
keywords robotic weaving; textile-reinforcement; parametric design; lightweight structure; textile-reinforced concrete
series CAADRIA
email theodoros.dounas@xjtlu.edu.cn
full text file.pdf (12,033,196 bytes)
references Content-type: text/plain
details citation check to select
100%; open Ahlquist, S and Menges, A (2011) Find in CUMINCAD Articulated Behavior: computational methods for the generation and materialization of complex force-active textile morphologies , Proceedings of the Ambience'11 International Conference, Boras (Sweden), pp 13-19
100%; open Braumann, J and Brell-Cokcan, S (2015) Find in CUMINCAD Adaptive Robot Control: new parametric workflows directly from design to KUKA robots , Proceedings of the 33rd eCAADe Conference 2015, Vienna (Austria), pp 243-250
100%; open Calister, WD (2007) Find in CUMINCAD Materials Science and Engineering: an introduction , John Wiley & Sons, Inc, 7, pp 665-715
100%; open Cauberg, N, Tysmans, T, Adriaenssens, S, Wastiels, J, Mollaert, M and Belkassem, B (2012) Find in CUMINCAD Shell elements of textile reinforced concrete using fabric formwork: a case study , Advances in Structural Engineering, 15(4), pp 677-689
100%; open Doerstelmann, M, Knippers, J, Koslowski, V, Menges, A, Prado, M, Schieber, G and Vasey, L (2015) Find in CUMINCAD ICD/ITKE Research Pavilion 2014-15: Fibre Placement on a Pneumatic Body Based on a Water Spider Web , Architectural Design, 85(5), pp 60-65
100%; open Fereos, P and Tsiliakos, M (2014) Find in CUMINCAD Isoprototyping: rapid robotic aided fabrication for double curvature surfaces , Proceedings of the 32nd eCAADe Conference 2014, Newcastle (UK), pp 433-443
100%; open Grasser, G and Brueck, M (2011) Find in CUMINCAD Textile Qualities: parametric design, simulation and fabrication based on new composite materials , Proceedings of the Ambience'11 International Conference, Boras (Sweden), pp 30-37
100%; open Huang, A, Lewis, S and Moore, WP (2014) Find in CUMINCAD Nearly Minimal: how intuition and analysis inform the minimal surface geometries in the pure tension pavilion , Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) 2014, Los Angeles (USA), pp 209-218
100%; open McQuaid, M and Beesley, P (2015) Find in CUMINCAD Extreme Textiles: designing for high performance , Princeton Architectural Publishing
100%; open Menges, A, Prado, M, Dorstelmann, M, Schwinn, T and Knippers, J (2014) Find in CUMINCAD Core-Less Filament Winding , Robotic Fabrication in Architecture, Art and Design, 2, pp 275-289
100%; open Narahara, T (2013) Find in CUMINCAD Adaptive Growth Using Robotic Fabrication , Proceedings of the 18th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA) 2013, Singapore, pp 65-74
100%; open Neville, MA (1996) Find in CUMINCAD Properties of Concrete , Pearson Education Limited
100%; open Poinet, P, Baharlous, E, Schwinn, T and Menges, A (2016) Find in CUMINCAD Adaptive Pneumatic Shell Structures: feedback driven robotic stiffening of inflated extensible membranes and further rigidification for architectural applications , Proceedings of the 34th eCAADe Conference 2016, Oulu (Finland), pp 549-558
100%; open Rippmann, M and Block, P (2013) Find in CUMINCAD Funicular Shell Design Exploration , Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) 2013, Cambridge, pp 337-346
100%; open Schwartz, T (2012) Find in CUMINCAD HAL , Robotic Fabrication in Architecture, Art and Design, 2, pp 92-101
100%; open Yuan, PF and Chai, H (2015) Find in CUMINCAD Reverse Rafter: structural performance simulation based on wood tectonics , Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA) 2015, Daegu (Korea), pp 693-702

last changed 2017/05/09 08:05
HOMELOGIN (you are user _anon_504346 from group guest) Works Powered by SciX Open Publishing Services 1.002