CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References
id caadria2019_198
authors Teo, Elizabeth, Pang, Yun Jie, Xie, Yu, Ratchakitprakarn, Pheeraphat, Low, Rebekah and Dritsas, Stylianos
year 2019
title Stereolithography with Randomized Aggregates
source M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 2, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 323-332
summary The paper documents the design and development of an additive manufacturing process based on stone aggregates. Unlike conventional 3D printing technologies which target miniaturization of the material grain and deposition layers to achieve as high resolution as possible, our process deploys sizeable and randomized grains of stone. The objective of this is to leverage between physical scale of the particulate and time it takes to produce large enough artefacts, fast enough to potentially evoke spatial qualities. Perhaps unavoidably, due to its materiality, the process revisits one of the most archaic methods of building technology, namely masonry, and suggests for a unique digital perspective for structures and landscapes made from stone.
keywords Digital Fabrication; Additive Manufacturing; Aggregate Assemblies
series CAADRIA
email elizabethtmq@gmail.com
full text file.pdf (13,422,712 bytes)
references Content-type: text/plain
Details Citation Select
100%; open Aejmelaeus-Lindström, P., Rusenova, G., Mirjan, A., Gramazio, F. and Kohler, M. (2018) Find in CUMINCAD Direct Deposition of Jammed Architectural Structures , Proceedings of Robotic Fabrication in Architecture, Art and Design, pp. 270-281

100%; open Aejmelaeus-Lindström, P., Willmann, J., Tibbits, S., Gramazio, F. and Kohler, M. (2016) Find in CUMINCAD Jammed Architectural Structures: Towards Large-Scale Reversible Construction. Granular Matter , Granular Matter, pp. 2-12

100%; open Andres, J., Bock, T. and Gebhart, F. (1994) Find in CUMINCAD First results of the development of the masonry robot system ROCCO: A Fault Tolerant Assembly Tool , 11th International Symposium on Automation and Robotics in Construction (ISARC), pp. 87-93

100%; open Ariza, I., Sutherland, T.S., Durham, J.B., Mueller, C., McGee, W. and Clifford, B. (2016) Find in CUMINCAD Robotic Fabrication of Stone Assembly Details , Proceedings of FABRICATE, pp. 106-113

100%; open Block, P., Rippmann, M., Van Mele, T. and Escobedo, D. (2016) Find in CUMINCAD The Armadillo Vault: Balancing Computation and Traditional Craft , Proceedings of FABRICATE, pp. 286-293

100%; open Bos, F., Wolfs, R., Ahmed, Z. and Salet, T. (2016) Find in CUMINCAD Additive manufacturing of concrete in construction: potentials and challenges of 3D concrete printing , Virtual and Physical Prototyping, 11(3), pp. 209-225

100%; open Burry, M. (2016) Find in CUMINCAD Robots at the Sagrada Família Basilica: A Brief History of Robotised Stone-Cutting , Proceedings of Robotic Fabrication in Architecture, Art and Design, pp. 3-16

100%; open Dierichs, K. and Menges, A. (2010) Find in CUMINCAD Material Computation in Architectural Aggregate Systems Formation , Proceedings of the Association for Computer Aided Design In Architecture, New York, USA, pp. 372-378

100%; open Dierichs, K., Schwinn, T. and Menges, A. (2012) Find in CUMINCAD Robotic Pouring of Aggregate Structures, Responsive motion planning strategies for online robot control of granular pouring processes with synthetic macro-scale particles , Proceedings of Robotic Fabrication in Architecture, Art and Design, pp. 196-205

100%; open Dillenburger, B. and Hansmeyer, M. (2014) Find in CUMINCAD Printing Architecture: Castles made of sand , Proceedings of FABRICATE, pp. 92-97

100%; open Friedman, J., Heamin, K. and Mesa, O. (2014) Find in CUMINCAD Experiments in Additive Clay Depositions Woven Clay , Proceedings of Robotic Fabrication in Architecture, Art and Design, pp. 261-274

100%; open Gambao, E., Balaguer, C. and Gebhart, F. (2000) Find in CUMINCAD Robot assembly system for computer-integrated construction , Automation in Construction, 9, pp. 479-487

100%; open Gardiner, J.B. and Janssen, S.R. (2014) Find in CUMINCAD FreeFab, Development of a Construction-Scale Robotic Formwork 3D Printer , Proceedings of Robotic Fabrication in Architecture, Art and Design, pp. 131-146

100%; open Gramazio, F. and Kohler, M. (2008) Find in CUMINCAD Digital Materiality in Architecture , Lars Muller Publishers

100%; open Huang, Y., Leu, M.C., Mazumder, J. and Donmez, A. (2015) Find in CUMINCAD Additive Manufacturing: Current State, Future Potential, Gaps and Needs, and Recommendations , Journal of Manufacturing Science and Engineering, 137(1), pp. 1231-1241

100%; open Khoshnevis, B. (1998) Find in CUMINCAD Innovative rapid prototyping process making large sized, smooth surface complex shapes in a wide variety of materials , Materials Technology, 13, pp. 52-63

100%; open Khoshnevis, B. (2004) Find in CUMINCAD Automated construction by contour crafting, related robotics and information technologies , Automation in Construction, 13, pp. 5-19

100%; open Kurilla, L. and Svoboda, L. (2012) Find in CUMINCAD Geometry Optimization, Realization of a ?uid-form structure composed of spherical components, fabricated by means of computer software and robotic arms , Proceedings of Robotic Fabrication in Architecture, Art and Design, pp. 184-195

100%; open Lim, S., Bushwell, R.A., Le, T.T., Austin, S.A., Gibb, A.G.F. and Thorpe, T. (2012) Find in CUMINCAD Developments in construction-scale additive manufacturing processes , Automation in Construction, 21, pp. 262-268

100%; open Lowke, D., Dini, E. Perrot, Weger, D., Gehlen, C. and Dillenburger, B. (2018) Find in CUMINCAD Particle-bed 3D printing in concrete construction - Possibilities and challenges, Cement and Concrete Research , Volume 112, 50-65

last changed 2019/04/16 08:22
pick and add to favorite papersHOMELOGIN (you are user _anon_267952 from group guest) CUMINCAD Papers Powered by SciX Open Publishing Services 1.002