CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

id cf2011_p060
authors Sheward, Hugo; Eastman Charles
year 2011
title Preliminary Concept Design (PCD) Tools for Laboratory Buildings, Automated Design Optimization and Assessment Embedded in Building Information Modeling (BIM) Tools.
source Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 451-476.
summary The design of laboratory buildings entails the implementation of a variety of design constraints such as building codes; design guidelines and technical requirements. The application of these requires from designers the derivation of data not explicitly available at early stages of design, at the same time there is no precise methodology to control the consistency, and accuracy of their application. Many of these constraints deal with providing secure environmental conditions for the activities inside laboratories and their repercussions both for the building occupants and population in general, these constraints mandate a strict control over the buildingé─˘s Mechanical Equipment (MEP), in particular the Heating Ventilating and Air Conditioning (HVAC) system. Due to the importance of these laboratory designers are expected to assess their designs not only according spatial relationships, but also design variables such as HVAC efficiency, air pressure hierarchies, operational costs, and the possible implications of their design decisions in the biological safety of the facility. At this point in time, there are no practical methods for making these assessments, without having constant interaction with HVAC specialists. The assessment of laboratory design variables, particularly those technical in nature, such as dimensioning of ducts or energy consumption are usually performed at late stages of design. They are performed by domain experts using data manually extracted from design information, with the addition of domain specific knowledge, the evaluation is done mostly through manual calculations or building simulations. In traditional practices most expert evaluations are performed once the architectural design have been completed, the turn around of the evaluation might take hours or days depending on the methods used by the engineer, therefore reducing the possibility for design alternatives evaluation. The results of these evaluations will give clues about sizing of the HVAC equipment, and might generate the need for design reformulations, causing higher development costs and time delays. Several efforts in the development of computational tools for automated design evaluation such as wheel chair accessibility (Han, Law, Latombe, Kunz, 2002) security and circulation (Eastman, 2009), and construction codes (ww.Corenet.gov.sg) have demonstrated the capabilities of rule or parameter based building assessment; several computer applications capable of supporting HVAC engineers in system designing for late concept or design development exist, but little has been done to assess the capabilities of computer applications to support laboratory design during architectural Preliminary Concept Design(PCD) (Trcka, Hensen, 2010). Developments in CAD technologies such as Building Information Modeling (BIM) have opened doors to formal explorations in generative design using rule based or parametric modeling [7]. BIM represents buildings as a collection of objects with their own geometry, attributes, and relations. BIM also allows for the definition of objects parametrically including their relation to other model objects. BIM has enabled the development of automated rule based building evaluation (Eastman, 2009). Most of contemporary BIM applications contemplate in their default user interfaces access to design constraints and object attribute manipulations. Some even allow for the application of rules over these. Such capabilities make BIM viable platforms for automation of design data derivation and for the implementation of generative based design assessment. In this paper we analyze the possibilities provided by contemporary BIM for implementing generative based design assessment in laboratory buildings. In this schema, domain specific knowledge is embedded in to the BIM system as to make explicit design metrics that can help designers and engineers to assess the performance of design alternatives. The implementation of generative design assessments during PCD can help designers and engineers to identify design issues early in the process, reducing the number of revisions and reconfigurations in later stages of design. And generally improving design performance.
keywords Heating ventilating and Air Conditioning (HVAC), Building Information Models (BIM), Generative Design Assessment
series CAAD Futures
email hshewardga3@gatech.edu
full text file.pdf (6,663,261 bytes)
references Content-type: text/plain
details citation check to select
100%; open (2007) Find in CUMINCAD Biosafety in Microbiological and Biomedical Laboratories (BMBL) , Fifth Edition, U.S. Department of Health and Human Services Centers for Disease Control and Prevention and National Institutes of Health US Government Printing Office.
100%; open Akin, O. (1978) Find in CUMINCAD How do Architects Design ? Artificial Intelligence and Pattern Recognition , Computer Aided Design. North-Holland Publishing Company, pp. 65-98
100%; open Ashrae (2009) Find in CUMINCAD Ashrae handbook-fundamentals , Atlanta : American Society of Heating, Refrigerating and Air-conditioning Engineers, inc
100%; open Bazjanac, V. (2001) Find in CUMINCAD Acquisition of building geometry in the simulation of energy performance , Citeseer
100%; open Bell, A.A.Jr. (2000) Find in CUMINCAD HVAC - Equations, Data, and Rules of Thumb (2nd Edition) , McGraw-Hill
100%; open Brown, W.K. (1996) Find in CUMINCAD Laboratory design loads , ASHRAE Transactions 1996, Vol. 102
100%; open Dahan, F. (2000) Find in CUMINCAD Laboratories: A guide to master planning, programming, procurement, and design , W.W. Norton & Company, ISBN 0393730581
100%; open DiBerardinis, L.J., Baum, J.S., First, M., Gatwood, G.T. & Seth A.K. (Eds.) (2001) Find in CUMINCAD Guidelines for Laboratory Design: Health and Safety Considerations , 3rd Edition: Wiley-Inter science, New York, NY, US$ 145.00, 640 pp., ISBN: 0-471-25447-9
100%; open Eastman, C. (2009) Find in CUMINCAD Automated Assessment of Early Concept Designs , Architectural Design 79(2) : 52-57
100%; open Ellis, M.W. & Mathews, E. H. (2001) Find in CUMINCAD A new simplified thermal design tool for architects , Building and Environment 36 : 13
100%; open Ellis, M.W. & Mathews, E.H. (2002) Find in CUMINCAD Needs and trends in building and HVAC system design tools , Building and Environment 37 : 461-470
100%; open Griffin, B. (2000) Find in CUMINCAD Laboratory Design Guide: for Clients, Architects And Their Design Team: the Laboratory Design Process From Start to Finish , Array Oxford: Architectural Press
100%; open Han, C.S.; Law, K.H.; Latombe, J.-C. & Kunz, J.C. (2002) Find in CUMINCAD A performance-based approach to wheelchair accessible route analysis , Advanced Engineering Informatics 16 (2002) 53-71, Elsevier Science Ltd
100%; open Holzer, D. (2009) Find in CUMINCAD Sense-making across collaborating disciplines in the early stages of architectural design , PhD dissertation, School of Architecture and Design and Social Context Portfolio RMIT University, October
100%; open McIntosh, I., Dorgan, C.B. & Dorgan, C.E. (2001) Find in CUMINCAD ASHRAE Laboratory Design Guide , American Society of Heating Refrigerating and Air-Conditioning Engineers. ISBN 10: 1-883413-97-4
100%; open Nagai, Y., Candy, L. & Edmonds, E. (2003) Find in CUMINCAD Representations of design Thinking - A Review of Recent Studies , Journal of the Asian Design International Conference, CD-ROM N░341
100%; open Thammavijitdej, P. & Horayangkura, V. (2006) Find in CUMINCAD Interdisciplinary Conflicts and Resolution as Cultural Behavior Among Architects and Engineers , Thammasat Review, Vol. 11, N░1
100%; open Trcka, M. & Hensen, J.L. (2010) Find in CUMINCAD Overview of HVAC system simulation , Automation in Construction 19 : 7
100%; open Ullman, D.G., Wood, S. & Craig, D. (1990) Find in CUMINCAD The importance of drawing in the mechanical design process , Comput. & Graphics, Vol. 14, No. 2, pp, 203-274
100%; open Van der Zee, A. & de Vries B. (2008) Find in CUMINCAD Design by Computation , proceedings Generative Art 2008, pp. 35-52

last changed 2012/02/11 18:21
HOMELOGIN (you are user _anon_817199 from group guest) Works Powered by SciX Open Publishing Services 1.002