CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

id ecaade2012_102
authors Pavlícek, Jiri; Kaftan, Martin
year 2012
title Parametric Design System for Passive Houses
source Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 487-494
summary The intention of this research is to develop a design system for geometrically complex passive houses. Research focuses especially on the link-up of the CAAD (Computer-aided architectural design) and the CAM process (Computer-aided manufacturing) and deals only with timber structures. The aim of the project is to develop a system that would automate a creation of the computer model of the geometrically complex timber structures and link it to fabrication process. It should be possible to use the system for houses of the size of a family house up to an apartment house. The advantages of the system ought to be the fabrication preciseness, economical availability, high speed of construction, eco-friendliness and above all absence of geometrical constraints.
wos WOS:000330320600051
keywords Parametric; passive house; timber; CLT; geometry
series eCAADe
full text file.pdf (1,750,146 bytes)
references Content-type: text/plain
details citation check to select
100%; open Addis, B (1994) Find in CUMINCAD The Art of the Structural Engineer , Artemis, London
100%; open Buri, HU And Weinand, Y (2010) Find in CUMINCAD Origami – Folded Plane Structures , Ph.D. Thesis, EPFL, Lausanne
100%; open Eigensatz, M et al. (eds.) (2010) Find in CUMINCAD Case studies in cost-optimized paneling of architectural freeform surfaces , Ceccato, C. et al. (eds.), Advances in Architectural Geometry 2010, Springer, Vienna, pp. 49–72
100%; open Glymph, J, Shelden, D, Ceccato, C, Mussel, J and Schober, H (2004) Find in CUMINCAD A parametric strategy for free-form glass structures using quadrilateral planar facets , Automation in Construction, 13(2), pp. 187–202
100%; open Liu, Y, Pottmann, H, Wallner, J, Yang, Y and Wang, W (2006) Find in CUMINCAD Geometric modeling with conical meshes and developable surfaces , Proc. of 33rd ACM SIGGRAPH, Borston, 681–689
100%; open Pottmann, H, Schiftner, A, Bo, P, Schmiedhofer, H, Wang, W, Baldassini, N and Wallner, J (2008) Find in CUMINCAD Freeform surfaces from single curved panels , ACM Transactions on Graphics, 27(3)
100%; open Schimek H, Calderon ER, Wilsche A (2012) Find in CUMINCAD Sewing Timber Panels: An innovative digitally supported joint system for self-supported timber plate structures , CAADRIA 2012 [Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia], pp. 213-222
100%; open Shelden, RD (2002) Find in CUMINCAD Digital Surface Representation and the Constructability of Gehry’s Architecture , Ph.D. thesis, Massachusetts Institute of Technology, Cambridge
100%; open Tsigkari M (2006) Find in CUMINCAD Tessellation of arbitrarily shaped objects , Master thesis, UCL, London
100%; open Wang, W and Liu, Y (2010) Find in CUMINCAD A note on planar hexagonal meshes , IMA Volumes in Mathematics and its Applications, 105(5), pp. 221–234

last changed 2014/04/14 11:07
HOMELOGIN (you are user _anon_53733 from group guest) Works Powered by SciX Open Publishing Services 1.002