CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
id ecaade2016_223
authors Khallaf, Mohamed and Jupp, Julie
year 2016
title Designing for Urban Microclimates: Towards A Generative Performance-based Approach to Wind Flow Optimization
source Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 95-106
wos WOS:000402064400009
summary This paper presents the foundations of a multidisciplinary design optimisation method that addresses the problem of competing wind flow profiles within urban microclimates. The simultaneous integration of architectural and urban design parameters and their aerodynamic constraints are investigated. Differences in the height of tall buildings, which define the urban canopy layer are accounted for. The formulation that supports the simulation of aerodynamic forces at the architectural and urban scales includes multidisciplinary parameter specification of 2D and 3D building geometry, spatial morphology, spatial topology, wind flow settings, and wind flow compliance. The MDO framework and its development are discussed relative to their generative performance-based capacity and innovative approach to multidisciplinary wind flow optimization
keywords Urban microclimate; Multidisciplinary design optimisation; Generative performance-based design; Systems level perspective
series eCAADe
full text file.pdf (612,934 bytes)
references Content-type: text/plain
Details Citation Select
100%; open Assimakopoulos, V.D and Ap Simon, H.M (2003) Find in CUMINCAD A numerical study of atmospheric pollutant dispersion in different two-dimensional street canyon configurations , Atmospheric Environment, 37, p. 4037-49

100%; open Capeluto, I. G, Yezioro, A and Shaviv, E (2003) Find in CUMINCAD Climatic aspects in urban design-a case study , Building and Environment, 38(6), pp. 827-835

100%; open Chan, AT and Au, WTW (2003) Find in CUMINCAD Strategic guideline for street canyon geometry to achieve sustainable street air quality , Atmospheric Environment, 37, p. 2761-72

100%; open Chan, AT and Ellen, SPS (2001) Find in CUMINCAD Strategic guideline for street canyon geometry to achieve sustainable street air quality , Atmospheric Environment, 35, p. 4089-98

100%; open Chan, TL and Dong, G (2002) Find in CUMINCAD Validation of a two-dimensional pollutant dispersion model in an isolated street canyon , Atmospheric environment, 36, p. 861-72

100%; open Chen, H.C and Patel, V.C (1998) Find in CUMINCAD Near-wall turbulence models for complex flows including separation , AIAA Journal, 26(6), pp. 641-648.

100%; open Coello, C. A. C, Van Veldhuizen, D.A and Lamont, G.B (2002) Find in CUMINCAD Evolutionary algorithms for solving multi-objective problems , Kluwer Academic, New York

100%; open Davenport, A.G (1971) Find in CUMINCAD The response of six building shapes to turbulent wind. Phil. Trans , R. Soc. A, 269, p. 385 - 394

100%; open Dutton, R and Isyumov, N (1990) Find in CUMINCAD Reduction of tall building motion by aerodynamic treatments , J. Wind Eng. Ind. Aerodyn, 36, p. 739-747

100%; open Erell, E, Pearlmutter, D and Williamson, T (eds) (2011) Find in CUMINCAD Urban Microclimate: Designing the Spaces Between Buildings , Earthscan

100%; open Flager, F, Welle, B, Bansal, P, Soremekun, G and Haymaker, J (2009) Find in CUMINCAD Multidisciplinary process integration and design optimization of a classroom building , Journal of Information Technology in Construction, 14, pp. 595-612

100%; open Gerber, D.J and Lin, S. H. E (2014) Find in CUMINCAD Designing in complexity: Simulation, integration, and multidisciplinary design optimization for architecture , Simulation, 90(8), pp. 936-959

100%; open Isyumov, N, Dutton, R and Davenport, A.G (1989) Find in CUMINCAD Davenport, Aerodynamic methods for mitigating wind-induced building motion , Proceedings of the ASCE Structures Congress

100%; open Kastner-Klein, P and Fedorovich, E. A (2001) Find in CUMINCAD Wind tunnel study of organized and turbulent air motions in street canyons , Journal of Wind Engineering and Industrial Aerodynamic, 89, p. 849-61

100%; open Keough, I and Benjamin, D (2010) Find in CUMINCAD Multi-objective optimization in architectural design. , Proceedings of the 2010 Spring Simulation Multiconference, p. 191

100%; open Kim, Y,C and Kanda, J (2010) Find in CUMINCAD Characteristics of aerodynamic forces and pressures on square plan buildings with height variations , J. Wind Eng. Ind. Aerodyn, 98, p. 98,449-465

100%; open Kim, Y.C and Kanda, j (2010) Find in CUMINCAD Effects of taper and set-back on wind force and wind-induced response of tall buildings , J. Wind Struct(98)6, p. 499-517 (13)

100%; open Kroo, I.M (1997) Find in CUMINCAD MDO for large-scale design , Multidisciplinary Design Optimization, State-of-the-Art, pp. 22-44

100%; open Lall, S.V and Deichmann, U (2012) Find in CUMINCAD Density and disasters: economics of urban hazard risk , The World Bank Research Observer, 27(1), pp. 74-105

100%; open Magnier, L and Haghighat, F (2010) Find in CUMINCAD Multiobjective optimization of building design using TRNSYS simulations, genetic algorithm, and Artificial Neural Network , Building and Environment, 45(3), pp. 739-746

last changed 2017/06/28 08:46
pick and add to favorite papersHOMELOGIN (you are user _anon_728845 from group guest) CUMINCAD Papers Powered by SciX Open Publishing Services 1.002