CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
id ecaade2017_094
authors Jovanovic, Marko, Vucic, Marko, Mitov, Dejan, Tepavčević, Bojan, Stojakovic, Vesna and Bajsanski, Ivana
year 2017
title Case Specific Robotic Fabrication of Foam Shell Structures
source Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 135-142
summary Most recent developments in the design of free form shells pursue new approaches in digital fabrication based on material properties and construction-aware design. In this research we proposed an alternative approach based on implementation of expanded polystyrene (EPS), a non-standard material for shells, in the process of industrial robot fabrication that enables fast and precise cutting of building elements. Main motivation for using EPS as a building material was driven by numerous advantages when compared to commonly used materials such as: recycleability, cost-efficiency, high earthquake resistance, durability and short assembly time. We describe case specific fabrication approach based on numerous production constraints (size of the panels, limited robot workspace, in situ conditions) that directly design the process.
keywords computational design; shell structures; robotic fabrication; hot-wire cutting; multi-robot control
series eCAADe
full text file.pdf (5,018,879 bytes)
references Content-type: text/plain
Details Citation Select
100%; open Brander, D, Baerentzen, A, Clausen, K, Fisker, A, Gravesen, J, Lund, M, Norbjerg, T, Steenstrup, K and Sondergaard, A (2016) Find in CUMINCAD Designing for Hot-Blade Cutting; Geometric Approaches for High-Speed Manufacturing of Doubly-Curved Architectural Surfaces , Advances in Architectural Geometry 2016, Zurich, pp. 306 - 327

100%; open Brander, D, Gravesen, J and N?rbjerg, T.B. (2017) Find in CUMINCAD Approximation by planar elastic curves , Advances in Computational Mathematics, 43, pp. 1-19

100%; open Eigensatz, M., Kilian, M., Schiftner, A., Mitra, N.J., Pottmann, H. and Pauly, M. (2010) Find in CUMINCAD Paneling architectural freeform surfaces , ACM transactions on graphics, 29, p. 45

100%; open Jovanovic, M, Rakovic, M, Tepavcevic, B, Borovac, B and Nikolic, M (2017) Find in CUMINCAD Robotic fabrication of freeform foam structures with quadrilateral and puzzle shaped panels , Automation in Construction, 74, pp. 28-38

100%; open La Magna, R, Waimer, F and Knippers, J (2016) Find in CUMINCAD Coreless Winding and Assembled Core-Novel fabrication approaches for FRP based components in building construction , Construction and Building Materials, 127, pp. 1009-1016

100%; open Mcgee, W, Feringa, J and S?ndergaard, A (2013) Find in CUMINCAD Processes for an Architecture of Volume , Rob| Arch 2012, pp. 62-71

100%; open Pigram, D and McGee, W (2011) Find in CUMINCAD Formation Embedded Design , Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA), pp. 122-131

100%; open Pottmann, H., Schiftner, A., Bo, P., Schmiedhofer, H., Wang, W., Baldassini, N. and Wallner, J. (2008) Find in CUMINCAD Freeform surfaces from single curved panels , ACM Transactions on Graphics, 27, p. 76

100%; open Richardson, J.N., Adriaenssens, S., Coelho, R.F. and Bouillard, P. (2013) Find in CUMINCAD Coupled form-finding and grid optimization approach for single layer grid shells , Engineering structures, 52, pp. 230-239

100%; open Rippmann, M and Block, P (2011) Find in CUMINCAD Digital Stereotomy: Voussoir geometry for freeform masonry-like vaults informed by structural and fabrication constraints , Proceedings of the IABSE-IASS Symposium

100%; open Rippmann, M and Block, P (2011) Find in CUMINCAD New design and fabrication methods for freeform stone vaults based on ruled surfaces , Computational Design Modelling, pp. 181-189

100%; open Rippmann, M., Van Mele, T., Popescu, M., Augustynowicz, E., Echenagucia, M.,T., Barentin, C.C, Frick, U., Block, P. (2016) Find in CUMINCAD The Armadillo Vault , Advances in Architectural Geometry 2016, Zurich, pp. 344 - 363

100%; open Rust, R, Gramazio, F and Kohler, M (2016) Find in CUMINCAD Force Adaptive Hot-Wire Cutting , Advances in Architectural Geometry 2016

100%; open Rust, R, Jenny, D, Gramazio, F and Kohler, M (2016) Find in CUMINCAD Spatial Wire Cutting: Cooperative robotic cutting of non-ruled surface geometries for bespoke building components, Living Systems and Micro-Utopias: Towards Continuous Designing , Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016), Melbourne, pp. 529-538

100%; open Wang, C.C. and Elber, G (2014) Find in CUMINCAD Multi-dimensional dynamic programming in ruled surface fitting , Computer-Aided Design, 51, pp. 39-49

100%; open Wang, T.H., Krishnamurti, R and Shimada, K (2014) Find in CUMINCAD Restructuring surface tessellation with irregular boundary conditions , Frontiers of Architectural Research, 3, pp. 337-347

100%; open Wu, K and Kilian, A (2016) Find in CUMINCAD Developing Architectural Geometry Through Robotic Assembly and Material Sensing , Robotic Fabrication in Architecture, Art and Design 2016, pp. 240-249

last changed 2017/09/13 13:31
pick and add to favorite papersHOMELOGIN (you are user _anon_898020 from group guest) CUMINCAD Papers Powered by SciX Open Publishing Services 1.002