CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References
id ijac201917105
authors Agkathidis, Asterios; Yorgos Berdos and André Brown
year 2019
title Active membranes: 3D printing of elastic fibre patterns on pre-stretched textiles
source International Journal of Architectural Computing vol. 17 - no. 1, 74-87
summary There has been a steady growth, over several decades, in the deployment of fabrics in architectural applications; both in terms of quantity and variety of application. More recently, three-dimensional printing and additive manufacturing have added to the palette of technologies that designers in architecture and related disciplines can call upon. Here, we report on research that brings those two technologies together – the development of active membrane elements and structures. We show how these active membranes have been achieved by laminating three-dimensional printed elasto-plastic fibres onto pre-stretched textile membranes. We report on a set of experimentations involving one-, two- and multi-directional geometric arrangements that take TPU 95 and polypropylene filaments and apply them to Lycra textile sheets, to form active composite panels. The process involves a parameterised design, actualised through a fabrication process including stress-line simulation, fibre pattern three-dimensional printing and the lamination of embossed patterns onto a pre-stretched membrane; followed by the release of tension afterwards in order to allow controlled, self-generation of the final geometry. Our findings document the investigation into mapping between the initial two-dimensional geometries and their resulting three-dimensional doubly curved forms. We also reflect on the products of the resulting, partly serendipitous, design process.
keywords Digital fabrication, three-dimensional printing, parametric design, material computation, fabrics
series journal
email a3lab@liv.ac.uk
full text file.pdf ( bytes)
references Content-type: text/plain
Details Citation Select
100%; open Ahlquist S. and Menges A. (2016) Find in CUMINCAD Frameworks for computational design of textile micro-architectures and material behaviour in forming complex force-active structures , Beesley P, Khan O and Stacey M (eds) Adaptive architecture . Cambridge, ON, Canada: ACADIA, pp. 281–292

100%; open Ahlquist S., Askarinejad A., Rizkallah C. et al. (2014) Find in CUMINCAD Post-forming composite morphologies: materialization and design methods for inducing form through textile material behavior , Gerber D, Huang A and Sanchez J (eds) Design agency . Los Angeles, CA: ACADIA, pp. 267–276

100%; open Bader C., Kolb D., Weaver J.C. et al. (2016) Find in CUMINCAD Data-driven material modelling with functional advection for 3D printing of materially heterogeneous objects , 3D Print Addit Manuf; 3(2): 71–79

100%; open Baraff D. and Witkin A. (1994) Find in CUMINCAD Large steps in clothing simulation , Proceedings of the computer graphics (SIGGRAPH), Orlando, FL, 24–29 July 1994, pp. 43–54

100%; open Baranovskaya Y., Prado M., Doerstelmann M. et al. (2016) Find in CUMINCAD Knitflatable architecture: pneumatically activated pre-programmed knitted textiles , Proceedings of the 34th eCAADe, Complexity & simplicity (eds A Herneoja and T Österlund), Oulu, Finland, 24–26 August 2016, pp. 571-580. Oulu: eCAADe

100%; open Berdos G. and Cheng C. (2017) Find in CUMINCAD Towards active fabrication , Proceedings of the IASS Annual Symposium 2017, Interfaces – Architecture, Engineering, Science (eds A Boegle and M Grohmann), Hamburg, 25–28 September 2017)

100%; open Blonder A.C. (2017) Find in CUMINCAD Layered fabric materiality in architectural FRP surface elements , Proceedings of the IASS Annual Symposium 2017, Interfaces – Architecture, Engineering, Science (eds A Boegle and M Grohmann), Hamburg, 25–28 September 2017

100%; open Brown A. and Rice P. (2001) Find in CUMINCAD The engineer’s contribution to contemporary architecture: Peter Rice , London: Thomas Telford

100%; open Cherif C., Krzywinski S., Lin H. et al. (2013) Find in CUMINCAD New process chain for realisation of complex 2D/3D weft knitted fabrics for thermoplastic composite applications , Proc Mater Sci; 2: 111–129

100%; open Garlock M.E.M. and Billington D. (2008) Find in CUMINCAD Candela models constructed by students for an exhibition in The Princeton University Art Museum: Fe?lix Candela: engineer, builder, structural artist , Princeton, NJ: Department of Civil and Environmental Engineering, School of Engineering and Applied Science, Princeton University

100%; open Goldsmith N. (2016) Find in CUMINCAD The physical modelling legacy of Frei Otto , Int J Space Struct; 31(1): 25–30

100%; open Kogler M., Bergschneider J., Lutz M. et al. (2016) Find in CUMINCAD Possible applications of 3D printing technology on textile substrates , Mater Sci Eng; 141: 012011

100%; open La Magna R. and Knippers J. (2018) Find in CUMINCAD Tailoring the bending behaviour of material patterns for the induction of double curvature , Serpanos D and Wolf M (eds) Internet of everything, algorithms, methodologies and perspectives . Berlin: Springer

100%; open Malengier B., Hertleer C., Cardon L. et al. (2018) Find in CUMINCAD 3D printing on textiles: testing of adhesion , J Fashion Tech Textile Eng; 4: 013

100%; open Otto F., Rasch B. and Schanz S. (1995) Find in CUMINCAD Finding form: towards an architecture of the minimal , Berlin: Edition Axel Menges

100%; open Oxman N. and Rosenberg J.L. (2007) Find in CUMINCAD Material-based design computation: an inquiry into digital simulation of physical material properties as design generators , Int J Architect Comput; 5(1): 25–44

100%; open Tam K.M.M. and Mueller C.T. (2017) Find in CUMINCAD Additive manufacturing along principal stress lines , 3D Print Addit Manuf; 4(2): 63–81

100%; open Zupin Z. and Dimitrovski K. (2014) Find in CUMINCAD Mechanical properties of fabrics made from cotton and biodegradable yarns bamboo, SPF, PLA , Dubrovki D (ed.) Weft in woven fabric engineering. New Delhi, India: CBS Publishers & Distributors, pp. 25–46

last changed 2019/08/07 12:04
pick and add to favorite papersHOMELOGIN (you are user _anon_213649 from group guest) CUMINCAD Papers Powered by SciX Open Publishing Services 1.002