CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
id sigradi2018_1473
authors Kimi Cogima, Camila; V. V. de Paiva, Pedro; Dezen-Kempter, Eloisa; G. De Carvalho, Marco Antonio
year 2018
title Digital scanning and BIM modeling for modern architecture preservation: the Oscar Niemeyer’s Church of Saint Francis of Assisi
source SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 457-462
summary The Building Information Modelling (BIM) technology enabled improvement in the design, construction and maintenance stages highly. In the field of existing buildings, including historical assets, this technology has not yet had the same impact. This paper presents a methodology to create an intelligent digital model for an outstanding building from modern architecture in Brazil using multiple reality-based technologies. The fusion of the different point cloud raw data generated a high-resolution Dense Surface Model (DSM), the base of an accurate and detailed parametric Model. This study demonstrated the potential of digital surveying, including low-cost sensors, and BIM for built heritage documentation.
keywords Reality-based surveying; Point cloud; As-is model; Building Information Modelling; Modern Heritage
series SIGraDi
full text file.pdf (557,103 bytes)
references Content-type: text/plain
Details Citation Select
100%; open Antón, D., Medjdoub, B., Shrahily, R., & Moyano, J. (2018) Find in CUMINCAD Accuracy evaluation of the semi-automatic 3D modeling for historical building information models , International Journal of Architectural Heritage, 12(5), 790-805

100%; open Castagnetti, C., Dubbini, M., Ricci, P. C., Rivola, R., Giannini, M., & Capra, A. (2017) Find in CUMINCAD Critical issues and key points from the survey to the creation of the Historical Building Information Model: the case of Santo Stefano Basilica , The International Archives of Photogrammetry, Remote Sensing and Spatial Information Sciences, 42, 467

100%; open Clapuyt, F., Vanacker, V., & Van Oost, K. (2016) Find in CUMINCAD eproducibility of UAV-based earth topography reconstructions based on Structure-from-Motion algorithms , Geomorphology, 260, 4-15

100%; open Dellepiane, M., Dell’Unto, N., Callieri, M., Lindgren, S., & Scopigno, R. (2013) Find in CUMINCAD Archeological excavation monitoring using dense stereo matching techniques , Journal of Cultural Heritage, 14(3), 201-210

100%; open Dore, C., & Murphy, M. (2012) Find in CUMINCAD Integration of Historic Building Information Modeling (HBIM) and 3D GIS for recording and managing cultural heritage sites , Virtual Systems and Multimedia (VSMM), 2012 18th International Conference on (pp. 369-376). IEEE

100%; open Everaerts, J. (2008) Find in CUMINCAD The use of unmanned aerial vehicles (UAVs) for remote sensing and mapping , The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, 37(2008), 1187-1192

100%; open Faltýnová, M., Matoušková, E., Šedina, J., & Pavelka, K. (2016) Find in CUMINCAD BUILDING FACADE DOCUMENTATION USING LASER SCANNING AND PHOTOGRAMMETRY AND DATA IMPLEMENTATION INTO BIM , International Archives of the Photogrammetry, Remote Sensing & Spatial Information Sciences, 41

100%; open Hou, S. Q. (2016) Find in CUMINCAD A Design and Research on Protection of Architectural Heritage Based on Digital Technology , MATEC Web of Conferences (Vol. 63, p. 02038). EDP Sciences

100%; open Murtiyoso, A., Grussenmeyer,P., & Freville, T. (2017) Find in CUMINCAD Close range UAV accurate recording and modeling of St-Pierre-le-Jeune neo-romanesque church in Strasbourg (France) , The International Archives of Photogrammetry, Remote Sensing and Spatial Information Sciences, 42, 519

100%; open Nex, F.,& Remondino, F. (2014) Find in CUMINCAD UAV for 3D mapping applications: a review , Applied geomatics, 6(1), 1-15

100%; open Nouwakpo, S. K., Weltz, M. A., & McGwire, K. (2016) Find in CUMINCAD Assessing the performance of structure-from-motion photogrammetry and terrestrial LiDAR for reconstructing soil surface microtopography of naturally vegetated plots , Earth Surface Processes and Landforms, 41(3), 308-322

100%; open Quattrini, R., Pierdicca R.&Morbidoni, C. (2017) Find in CUMINCAD Knowledge-based data enrichment for HBIM: Exploring high-quality models using the semantic-web , Journal of Cultural Heritage, 28

100%; open Sun, Z.,& Cao, Y. K. (2015) Find in CUMINCAD Data processing workflows from low-cost digital survey to various applications: three case studies of Chinese historic architecture , The International Archives of Photogrammetry, Remote Sensing and Spatial Information Sciences, 40(5),409

100%; open Tang, P., Huber, D., Akinci, B., Lipman, R., & Lytle, A. (2010) Find in CUMINCAD Automatic reconstruction of as-built building information models from laser-scanned point clouds: A review of related techniques , Automation in construction, 19(7), 829-843

100%; open Volk, R., Stengel, J., & Schultmann, F. (2014) Find in CUMINCAD Building Information Modeling (BIM) for existing buildings—Literature review and future needs , Automation in construction, 38, 109-127

100%; open Xu, Z., Wu, T. H., Shen, Y., & Wu, L. (2016) Find in CUMINCAD Three dimentional reconstruction of large cultural heritage objects based on UAV video and TLS data , The International Archives of Photogrammetry, Remote Sensing and Spatial Information Sciences, 41, 985

last changed 2019/05/20 09:13
pick and add to favorite papersHOMELOGIN (you are user _anon_48585 from group guest) CUMINCAD Papers Powered by SciX Open Publishing Services 1.002