Cumincad : CUMINCAD References : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 7681 to 7699 of 7699

Reformat results as: short short into frame detailed detailed into frame

Details	Citation	Select
	Yunis, Leyla, Ondøej Kyjánek, Moritz Dörstelmann, Marshall Prado, Tobias Schwinn, and Achim Menges (2014) Bio-inspired and Fabrication-Informed Design Strategies for Modular Fibrous Structures in Architecture , Fusion: Proceedings of the 32nd International Conference on Education and research in Computer Aided Architectural Design in Europe, edited by Emine Mine Thompson, vol. 2, 423–32. Newcastle upon Tyne, UK: eCAADe

	Zain, N. M., N. H. Hassan, M. Ibrahim, and M. S. Wahab (2011) Solid freeform fabrication of prototypes using palm oil fly ash prototypes via 3D printing , Journal of Applied Sciences, 2011

	Zeist, FV (2014) A bottom-up redevelopment strategy of (structurally) vacant office space in mass-customized housing solutions utilizing digital fabrication techniques , PhD Thesis, TU Delft

	Zhang, Xiao, Yuan, Chao, Yang, Liu, Yu, Peiran, Ma, Yiwen, Qiu, Song, Guo, Zhe and Yuan, Philip F. (2021) Design and Fabrication of Formwork for Shell Structures Based on 3D-printing Technology , Stojakovic, V and Tepavcevic, B - Towards a new configurable architecture - Proceedings of the 39th eCAADe Conference (pp. 487-496), Volume 1, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021

	Zhao H, Gu F, Huang QX, et al (2016) Connected fermat spirals for layered fabrication , ACM Trans Graph 2016; 35(4): 1–10

	Zhao, H., Gu, F., Huang, Q.-X., Garcia, J., Chen, Y., Tu, C., Benes, B., Zhang, H., Cohen-Or, D., & Chen, B. (2016) Connected Fermat Spirals for Layered Fabrication , ACM Transactions on Graphics (TOG), 35(4), 1-1, Available at: https://doi.org/1.1145/2897824.2925958.

	Zhao, J, Lombardi, D and Agkathidis, A (2020) Application of robotic technologies for the fabrication of traditional Chinese timber joints , eCAADe 38, pp. 351-360

	Zhao, J., Agkathidis, A., Lombardi, D., & Chen, H. (2023) A Computational Framework for Parametric Design and Robotic Fabrication of the Dougong joint , Dokonal, W, Hirschberg, U and Wurzer, G (eds.), in Proceedings of the 41th eCAADe Conference, Volume 1, pp. 313-322. Available at: https://doi.org/10.52842/conf.ecaade.2023.1.313

	Zhao, J., Lombardi, D., and Agkathidis, A. (2020) Application of Robotic Technologies for the Fabrication Of Traditional Chinese Timber Joints , Werner, L and Koering, D (eds.), Real-time-Proceedings of the 38th eCAADe Conference, Berlin, Germany, 16-18 September 2020, pp. 351-360. Available at: https://livrepository.liverpool.ac.uk/3119175/1/jianyang_2020.pdf (Accessed 14 February 2022)

	Zhao, J., Lombardi, D., Chen, H., & Agkathidis, A. (2021) Reinterpretation of the Dougong Joint by the Use of Parametric Tools and Robotic Fabrication Techniques , Stojakovic, V and Tepavcevic, B (eds.), Real-time-Proceedings of the 39th eCAADe Conference, Novi Sad, Serbia, 8-10 September 2021, pp. 233-242. Available at: http://papers.cumincad.org/data/works/att/ecaade2021_116.pdf (Accessed 11 February 2022)

	Zhao, J., Lombardi, D., Chen, H., & Agkathidis, A. (2021) Reinterpretation of the Dougong Joint by the use of Parametric Tools and Robotic Fabrication Techniques , eCAADe 2021: Towards a New, Configurable Architecture, 233-242

	Zhao, J., Lombardi, D., Chen, H., & Asterios Agkathidis. (2022) Reinterpreting the Dougong Joint by Using Parametric Design Methods and Robotic Fabrication Technologies: a Critical Review , Proceedings of the 40th eCAADe Conference, Ghent, 13-16 September 2022, Volume 2, Pak, B, Wurzer, G and Stouffs, R (eds), pp. 159-167. Available at: http://papers.cumincad.org/cgi-bin/works/Show?ecaade2022_5

	Zhen H., Wei Y. & Gang L. (2020) A performance-based urban block generative design using deep reinforcement learning and computer vision , The International Conference on Computational Design and Robotic Fabrication,pages 134–143. Springer

	Zivkovic, Sasa, and Christopher Battaglia (2017) Open Source Factory: Democratizing Large-Scale Fabrication Systems , Disciplines & Disruption: Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture, edited by Takehiko Nagakura, Skylar Tibbits, Mariana Ibanez, and Caitlin Mueller, 660–9. Cambridge, MA: ACADIA

	Zoran, A and Paradiso, J (2012) The FreeD: a handheld digital milling device for craft and fabrication , Proceedings of CHI 2013: Changing Perspectives, p. 3

	Zoran, A., Joseph P. (2012) The FreeD: A Handheld Digital Milling Device for Craft and Fabrication , ACM Press, doi:10.1145/2380296.2380299

	Zoran, A. (2013) Hybrid Reassemblage: An Exploration of Craft , Digital Fabrication and Artifact Uniqueness. Leonardo, 46(1), 4–10. Cambridge, MA: MIT Press

	Zwierzycki, M (2020) On AI Adoption Issues in Architectural Design - Identifying the issues based on an extensive literature review. , Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 1, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 515-524

	Álvarez, N., Bernal, M., Cáceres, K. (2020) Evolution and Projection of Computational Design Theories: Generation, Analysis, Selection and Fabrication , SIGraDI 2020. http://papers.cumincad.org/data/works/att/sigradi2020_17.pdf

For more results click below: