Cumincad : CUMINCAD References : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 81 to 100 of 3692

Reformat results as: short short into frame detailed detailed into frame

Details	Citation	Select
	Harald Kloft, Hans-Werner Krauss, Norman Hack, Eric Herrmann, Stefan Neudecker, Patrick Varady, and Dirk Lowke (2020) Influence of Process Parameters on the Interlayer Bond Strength of Concrete Elements Additive Manufactured by Shotcrete 3D Printing (SC3DP) , Cement and Concrete Research 134 (August): 106078

	Hawkins, W., Orr, J., Ibell, T. & Shepherd, P., (2020) A Design Methodology to Reduce the Embodied Carbon of Concrete Buildings using Thin-shell Floors , Engineering Structures, 207, 110195, doi:10.1016/j.engstruct.2020.110195 accessed June 2022

	Hawkins, W., Orr, J., Ibell, T., & Shepherd, P. (2020) A design methodology to reduce the embodied carbon of concrete buildings using thin-shell floors , Engineering Structures, 207, 110195

	He, Y, Zhang, Y, Zhang, C and Zhou, H (2020) Energy-saving potential of 3D printed concrete building with integrated living wall , Energy and Buildings, 222, pp. 2-13

	He, Y., Zhang, Y., Zhang, C., & Zhou, H. (2020) Energy-saving potential of 3D printed concrete building with integrated living wall , Energy and Buildings, 222, 110110. https://doi.org/10.1016/j.enbuild.2020.110110

	Kloft, H, Krauss, Hw, Hack, N, Herrmann, E, Neudecker, S, Varady, PA and Lowke, D (2020) Influence of process parameters on the interlayer bond strength of concrete elements additive manufactured by Shotcrete 3D Printing ( SC3DP ) , Cement and Concrete Research, 134(106078)

	Kruger, J, Cho, S, Zeranka, S, Viljoen, C and van Zijl, G (2020) 3D concrete printer parameter optimisation for high rate digital construction avoiding plastic collapse , Composites Part B: Engineering, 183(October 2019), p. 107660

	Kuzmenko, K, Gaudilliere, N, Dirrenberger, J and Baverel, O (2020) Assessing the Environmental Viability of 3D Concrete Printing Technology , Gengnagel, C, Baverel, O, Burry, O, Ramsgaard Thomsen, M and Weinzierl, S (eds), Design Modeling Symposium, Springer International Publishing

	Leder, S., Weber, R., Vasey, L., Yablonina, M., & Menges, A. (2020) Voxelcrete- Distributed Voxelized Adaptive Formwork , Architecture and Fabrication the Cognitive Age: Proceedings of the 38th Education and research Computer Aided Architectural Design Europe Conference, eCAADE 22 (pp. 433-442) Education and research Computer Aided Design Europe (eCAADE)

	Li, F., She, L., & Wang, H. (2020) Standardization and Diversification of Precast Concrete Facade Panel , IOP Conference Series: Earth and Environmental Science, 455, 012108. https://doi.org/10.1088/1755-1315/455/1/012108Love, L., Post, B., Roschli, A., Chesser, P., & Hun, D. E. (2019). Feasibility of Using BAAM for Mold Inserts for the Precast Concrete Industry. https://doi.org/10.2172/1606893Martins, P., Fonseca de Campos, P., Nunes, S., & Sousa, J. P. (2019). The Tectonics of Digitally Fabricated Concrete. A Case for Robotic Hot Wire Cutting. In RILEM Bookseries (pp. 311–322). https://doi.org/10.1007/978-3-319-99519-9_29Naboni, R., & Breseghello, L. (2018). Fused Deposition Modelling Formworks for Complex Concrete Constructions. SIGraDi 2018, XXII Congress of the Iberoamerican Society of Digital Graphics, 166–173. https://doi.org/10.5151/sigradi2018-1648Nahmens, A., & Mullens, M. (2011). Lean Homebuilding: Lessons Learned from a Precast Concrete Panelizer. Journal of Architectural Engineering, 17(4), 155–161. https://doi.org/10.1061/(ASCE)AE.1943-5568.0000037Pan, M., & Pan, W. (2019). Determinants of Adoption of Robotics in Precast Concrete Production for Buildings. Journal of Management in Engineering, 35(5), 5019007. https://doi.org/10.1061/(ASCE)ME.1943-5479.0000706Portland Cement Association. (n.d.). Ultra-High Performance Concrete. Retrieved August 25, 2020, from https://www.cement.org/learn/concrete-technology/concrete-design-production/ultra-high-performance-concreteRockite Cement. (2017). Specifications: Rockite Cement. [Data set]. from https://www.sculpt.com/2017/Tech/MsdsTechSheets/TechSheets/TECH_SHEET_rockite.pdfStephens, S. (2013). Sheared and shirred, surfaces and solids: Thom Mayne and his firm, Morphosis, turn a corner for the Perot Museum of Nature and Science in Dallas. Architectural Record, 201(1), 78–85

	Li, Victor C, Bos, Freek P., Yu, Kequan, McGee, Wes, Ng, Tsz Yan, Figueiredo, Stefan Chaves, Nefs, Karsten, Mechtcherine, Viktor, Nerella, Venkatesh Naidu, Pan, Jinlong, van Zijl, Gideon P.A.G. and Kruger, P.Jacques (2020) On the emergence of 3D printable Engineered, Strain Hardening Cementitious Composites (ECC/SHCC) , Cement and Concrete Research, 132, p. 106038

	Liang, H., Xi, L., Xiao, L., Guo, Li.,& Wenzhan, J. (2020) Research and application of performance based on desert sand 3D printing mortar , Concrete, 374, 108-110. HYPERLINK "https://doi.org/10.3969/j.issn.1002-3550.2020.12.024" https://doi.org/10.3969/j.issn.1002-3550.2020.12.024

	Lloret-Fritschi, E, Wangler, T, Gebhard, L, Mata-Falcón, J, Mantellato, S, Scotto, F, Burger, J, Szabo, A, Ruffray, N, Reiter, L, Boscaro, F, Kaufmann, W, Kohler, M, Gramazio, F and Flatt, R (2020) From Smart Dynamic Casting to a growing family of Digital Casting Systems , Cement and Concrete Research, 134, pp. 1-16

	Lloret-Fritschi, E., Wangler, T., Gebhard, L., Mata-Falcón, J., Mantellato, S., Scotto, F., ... & Flatt, R. (2020) From smart dynamic casting to a growing family of digital casting systems , Cement and Concrete Research, 134, 106071

	Lloret-Fritschi, Wangler, Gebhard, Mata-Falcón, Mantellato, Scotto, Burger, et al. (2020) From Smart Dynamic Casting to a growing family of digital casting systems , Cement and Concrete Research, 134 (special issue: Digital Concrete): 106071, DOI: 10.1016/j.cemconres.2020.106071

	Lowke, D, Talke, D, Dressler, I, Weger, D, Gehlen, C, Ostertag, C and Rael, R (2020) Particle bed 3D printing by selective cement activation - Applications , material and process technology , Cement and Concrete Research, 134(106077)

	Marchment, T and Sanjayan, J (2020) Mesh reinforcing method for 3D Concrete Printing , Automation in Construction, 109(June 2019), p. 102992

	McGee, W; Ng, TY; Li, VC; Yu, K. (2020) Extrusion Nozzle Shaping as an Approach for Improved 3DP of Engineered Cementitious Composites (ECC/SHCC) , Digital Concrete 2020. Springer, New York

	Mohammad, M, Masad, E and Al-Ghamdi, S G (2020) 3D concrete printing sustainability: A comparative life cycle assessment of four construction method scenarios , Buildings, 10 (12), p. 1-20.

	Mohan Sai, G. and Aravindan, A. (2020) A comparative study on newly emerging type of formwork systems with conventional type of form work systems , Materials Today: Proceedings. doi:https://doi.org/10.1016/j.matpr.2020.06.090.(Accessed 1 April 2024)

For more results click below: