Cumincad : CUMINCAD References : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 8255

Reformat results as: short short into frame detailed detailed into frame

Details	Citation	Select
	Bier, Henriette (2011) Robotic Environments , Proceedings of the 28th International Symposium on Automation and Robotics in Construction, 863–868. Seoul, Korea: ISARC

	Bier, Henriette (2011) Robotic Environments , Proceedings of the 28th International Symposium on Automation and Robotics in Construction, 863–868. Seoul, Korea: ISARC

	Bier, Henriette (2011) Robotic Environments , Proceedings of the 28th International Symposium for Automation and Robotics in Construction (ISARC), Seoul, South Korea, 29 June – 2 July 2011, 863–868. IAARC.

	Bier, Henriette (2011) Robotic Environments , Proceedings of the 28th International Symposium on Automation and Robotics in Construction, 863–868. Seoul, Korea: ISARC

	(2011) What we learnt from design teaching in collaborative virtual environments , Presented at the eCAADe

	(2011) Integrative design computation: Integrating material behaviour and robotic manufacturing processes in computational design for performative wood constructions , Proceedings of the 31th Annual Conference of the Association for Computer Aided Design Architecture (ACADIA), Banff (Alberta), pp. 72–81

	A Menges (2011) Integrative Design Computation: Integrating Material Behaviour and Robotic Manufacturing Processes in Computational Design for Performative Wood Constructions , ACADIA ‘11: Integration through Computation; Proceedings of the 31th Conference of the Association for Computer Aided Design In Architecture, 72–81

	Achim Menges (2011) Integrative Design Computation: Integrating Material Behaviour and Robotic Manufacturing Processes in Computational Design for Performative Wood Constructions , ACADIA 11: Integration through Computation; Proceedings of the 31stAnnual Conference of the Association for Computer Aided Design inArchitecture. Banff, Alberta: ACADIA. 72–81

	Ahamed Khan, M. K. A., K. I. Saharuddin, I. Elamvazuthi, and P. Vasant (2011) A Semi-Automated Floor Tiling Robotic System , 2011 IEEE Conference on Sustainable Utilization and Development in Engineering and Technology. Semenyih, Malaysia: STUDENT. 156–159.

	Bain, J. (2011) Thermomechanical Hot Tool Cutting and Surface Quality in Robotic Foam Sculpting , University of Canterbury, Christchurch, New Zealand

	Barbieri G, BG and Celentano A., CA (2011) Multimedia technology: a companion to art visitors , D. K. G. Styliaras, DKGS (eds), Handbook of Research on Technologies and Cultural Heritage: Applications and Environments, IG Global

	Bechthold M, King J, Kane A, et al (2018) Integrated environmental design and robotic fabrication workflow for ceramic shading systems , Proceedings of the 28th ISARC, Seoul, Korea International Association for Automation and Robotics in Construction, 2011, pp 70–75.

	Bechthold, M., et al. (2011) Integrated environmental design and robotic fabrication workflow for ceramic shading systems , 28th International Symposium on Automation and Robotics in Construction, Seoul, 70-75

	Bechthold, M., King, N., Kane, A. O., Niemasz, J. & Reinhart, C. (2011) Integrated environmental design and robotic fabrication workflow for ceramic shading systems , Construction, I. A. F. A. A. R. I., ed. 28th International Association for Automation and Robotics in Construction (ISARC), Seoul, Korea. 70-75.

	Bechthold, Martin, King, J., Kane, A., Niemasz, J., & Reinhart, C. (2011) Integrated Environmental Design and Robotic Fabrication Workflow for Ceramic Shading Systems , ISARC Proceedings, 70–75

	Bedarf, P., Szabo, A., Zanini, M. & Dillenburger, B. (2021) Machine Sensing for Mineral Foam 3D Printing , International Conference on Intelligent Robots and Systems: Workshop Robotic Fabrication, IROS 2021. https://doi.org/10.3929/ethz-b-000506097BubbleDeck. (2021). The Original Voided Slab. Retrieved May 11 2021, from https://www.bubbledeck.comCobiax. (2021). Voided flat plate slab technologies available worldwide. Retrieved May 11 2021, from https://www.cobiax.com/intl/en/Compas. (2020). Retrieved May 11 2021, from https://compas.dev/index.htmlFernández-Jiménez, A., & Palomo, A. (2005). Composition and microstructure of alkali activated fly ash binder: Effect of the activator. Cement and Concrete Research, 35(10), 1984–1992. https://doi.org/10.1016/j.cemconres.2005.03.003Furet, B., Poullain, P., & Garnier, S. (2019). 3D printing for construction based on a complex wall of polymer-foam and concrete. Additive Manufacturing, 28, 58–64. https://doi.org/10.1016/j.addma.2019.04.002Georgopoulos, C., & Minson, A. (2014). Sustainable concrete solutions. Wiley-Blackwell.Halpern, A. B., Billington, D. P., & Adriaenssens, S. (2013). The Ribbed Floor Slab Systems of Pier Luigi Nervi. Proceedings of the International Association for Shell and Spatial Structures (IASS), 7. http://formfindinglab.princeton.edu/wp-content/uploads/2011/09/Nervi_ribbed_floors.pdfHansemann, G., Schmid, R., Holzinger, C., Tapley, J. P., Peters, S., Trummer, A., & Kupelwieser, H. (2021). Lightweight Reinforced Concrete Slab: 130 different 3D printed voids. CPT Worldwide - Construction Printing Technology, 2021(2), 68.Jipa, A., Calvo Barentin, C., Lydon, G., Rippmann, M., Chousou, G., Lomaglio, M., Schlüter, A., Block, P., & Dillenburger, B. (2019). 3D-Printed Formwork for Integrated Funicular Concrete Slabs. Proceedings of the IASS Annual Symposium 2019, 10. https://www.researchgate.net/publication/335175125_3D-Printed_Formwork_for_Integrated_Funicular_Concrete_SlabsJipa, A., & Dillenburger, B. (2021). 3D Printed Formwork for Concrete: State-of-the-Art, Opportunities, Challenges, and Applications. 3D Printing and Additive Manufacturing, 00, 24. https://doi.org/10.1089/3dp.2021.0024Keating, S. J., Leland, J. C., Cai, L., & Oxman, N. (2017). Toward site-specific and self-sufficient robotic fabrication on architectural scales. Science Robotics, 2(5), 1-15. https://doi.org/10.1126/scirobotics.aam8986Liew, A., López, D. L., Van Mele, T., & Block, P. (2017). Design, fabrication and testing of a prototype, thin-vaulted, unreinforced concrete floor. Engineering Structures, 137, 323–335. https://doi.org/10.1016/j.engstruct.2017.01.075Palomo, A., Grutzeck, M. W., & Blanco, M. T. (1999). Alkali-activated fly ashes: A cement for the future. Cement and Concrete Research, 29(8), 1323–1329. https://doi.org/10.1016/S0008-8846(98)00243-9UN Environment Programme. (2020). Global Status Report for Buildings and Construction. Retrieved May 11 2021, from https://globalabc.org/sites/default/files/inline-files/2020%20Buildings%20GSR_FULL%20REPORT.pdfXu, H., & Van Deventer, J. S. J. (2000). The geopolymerisation of alumino-silicate minerals. International Journal of Mineral Processing, 59(3), 247–266. https://doi.org/10.1016/S0301-7516(99)00074-5Zhao, H., Gu, F., Huang, Q.-X., Garcia, J., Chen, Y., Tu, C., Benes, B., Zhang, H., Cohen-Or, D., & Chen, B. (2016). Connected fermat spirals for layered fabrication. ACM Transactions on Graphics, 35(4), 1–10. https://doi.org/10.1145/2897824.2925958

	Bellia, L., Bisegna, F., & Spada, G. (2011) Lighting in indoor environments: Visual and non-visual effects of light sources with different spectral power distributions , Building and Environment, 46(10), 1984-1992. https://doi.org/10.1016/j.buildenv.2011.04.007

	Champion, E and Dekker, A (2011) Biofeedback and virtual environments , International Journal of Architectural Computing, vol. 9, no. 4, pp. 377–396

	Champion, E. and Dekker, A. (2011) Biofeedback and Virtual Environments , International Journal of Architectural Computing, 9, pp. 377-395

	Chan, C-S (eds) (2011) Design representation and perception in virtual environments , Springer

For more results click below: