Cumincad : CUMINCAD References : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 10335

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2024_54bb3
in paper	Svatoš-Ražnjeviæ, Hana; Wyller, Maria; Schad, Eva; Menges, Achim (2024) Jammed Rubble: A building system concept for granular architecture from mixed mineral waste
authors	Rusenova, G. et al.
year	2018
title	Load-Bearing Capacity and Deformation of Jammed Architectural Structures
source	3D Printing and Additive Manufacturing, 5(4), pp. 257-267. doi: 10.1089/3dp.2018.0039
last changed	2024/08/28 15:21

_id	acadia21_328ss
in paper	Akbari, Mostafa; Lu, Yao; Akbarzadeh, Masoud (2021) From Design to the Fabrication of Shellular Funicular Structures
authors	S. Adriaenssens, P. Block, D. Veenendaal, and C. Williams, eds
year	2014
title	Shell Structures for Architecture: Form Finding and Optimization
source	London: Routledge
last changed	2024/01/09 08:06

_id	acadia22_326gg
in paper	Oghazian, Farzaneh; Moradzadeh, Sam; Davis, Felicia (2022) Form-finding of Architectural Knitted Tensioned Structures
authors	S. Ahlquist, and A. Menges
year	2013
title	Frameworks for Computational Design of Textile Micro-Architectures and Material Behavior in Forming Complex Force-Active Structures
source	ACADIA 2013 Adaptive Architecture;Proceedings of the 33rd Annual Conference of the Association forComputer Aided Design in Architecture. 281–292
last changed	2024/04/17 15:39

_id	acadia22_58kk2
in paper	Anton, Ana; Skevaki, Eleni; Bischof, Patrick; Reiter, Lex; Dillenburger, Benjamin (2022) Column-Slab Interfaces for 3D Concrete Printing
authors	S. Bhooshan, V. Bhooshan, A. Dell’Endice, J. Chu, P. Singer, J. Megens, T. Van Mele, and P. Block
year	2022
title	The Striatus bridge
source	Architecture,Structures and Construction 2: 521–543.
last changed	2024/04/17 15:35

_id	acadia22pr_106s4
in paper	Sabin, Jenny E.; Paraszczak, Michael; Pranger, Dillon; Hilla, John (2022) Convergence: Advancing Robotic Wire Arc Additive Manufacturing to the Architectural Scale in an Urban Context
authors	S. Galjaard, S. Hofman, N. Perry, and R. Shibo
year	2015
title	Optimizing Structural Building Elements in Metal by using Additive Manufacturing” In IASS Symposium 2015: Future Visions; Proceedings of International Association of Shell and Spatial Structures
source	Amsterdam, Netherlands
last changed	2024/04/17 15:46

_id	acadia22_76nn3
in paper	Kwon, Hyunchul; Soni, Priyank; Saeedi, Ali; Shahverdi, Moslem; Dillenburger, Benjamin (2022) 3D Printing and Shape Memory Alloys
authors	S. Naghashian, B. L. Fox, and M. R. Barnett
year	2014
title	Actuation curvature limits for a composite beam with embedded shape memory alloy wires
source	Smart Materials and Structures 23 (6): 065002
last changed	2024/04/17 15:35

_id	acadia22_318dd
in paper	Maierhofer, Mathias; Menges, Achim (2022) Methods for Integrating Architectural Design Intent into the Agent-based Design of (Adaptive) Truss Structures
authors	S. Steffen, S. Weidner, L. Blandini, and W. Sobek
year	2020
title	Using Influence Matrices as a Design and Analysis Tool for Adaptive Truss and Beam Structures
source	Frontiers in Built Environment 6
last changed	2024/04/17 15:39

_id	acadia21_470f2
in paper	£ochnicki, Grzegorz; Kalousdian, Nicolas Kubail; Leder, Samuel; Maierhofer, Mathias; Wood, Dylan; Menges, Achim (2021) Co-Designing Material-Robot Construction Behaviors
authors	S. Suzuki, A. Körner, and J. Knippers
year	2018
title	IGUANA: Advances on the development of a robust computational framework for active-geometric and-topologic modeling of lightweight structures
source	Proceedings of IASS Annual Symposia, IASS 2018 Boston Symposium: Approaches for Conceptual Structural Design, 1–10
last changed	2024/01/09 11:36

_id	ecaadesigradi2019_530zz
in paper	Salsi, Matteo and Erioli, Alessio (2019) Foam Making Sense - behavioral additive deposition and stigmergic agency for integrated surface tectonics
authors	S?ndergaard, A, Feringa, J and Stan, F
year	2018
title	Robotic abrasive wire cutting of polymerized styrene formwork systems for cost-effective realization of topology-optimized concrete structures
source	Construction Robotics, 2, pp. 81-92
last changed	2019/08/27 21:16

_id	caadria2020_409ww
in paper	Naboni, Roberto and Paparella, Giulio (2020) Circular Concrete Construction Through Additive FDM Formwork
authors	S?ndergaard, A, Feringa, J, N?rbjerg, T, Steenstrup, K, Brander, D, Graversen, J, Markvorsen, S, B?rentzen, A, Petkov, K, Hattel, J, Clausen, K, Jensen, K, Knudsen, L and Kortbek, J
year	2016
title	Robotic Hot-Blade Cutting. An Industrial Approach to Cost-Effective Production of Double Curved Concrete Structures
source	Reinhardt, D et al. (eds), RobArch2016 - Robotic Fabrication in Architecture, Art and Design 2016., Springer International Publishing, Switzerland, pp. 151-164
last changed	2020/08/14 22:24

_id	acadia19_616rr
in paper	Sitnikov, Vasily; Eigenraam, Peter; Papanastasis, Panagiotis; Wassermann-Fry, Stephan (2019) IceFormwork for Cast HPFRC Elements
authors	S?ndergaard, A., J. Feringa, F. Stan, and D. Maier.
year	2018
title	Realization of Topology Optimized Concrete Structures Using Robotic Abrasive Wire-Cutting of Expanded Polystyrene Formwork
source	Robotic Fabrication Architecture, Art and Design 2018, 473-488. Springer International Publishing
last changed	2019/12/18 09:15

_id	acadia19_208gg
in paper	Baghi, Ali; Baghi, Aryan; Kalantari, Saleh (2019) FLEXI-NODE
authors	S?ndergaard, A., J. Feringa, F. Stan, and D. Maier.
year	2018
title	Realization of topology optimized concrete structures using robotic abrasive wire-cutting of expanded polystyrene formwork
source	Robotic Fabrication Architecture, Art, and Design, 473–488. New York: Springer
last changed	2019/12/18 09:06

_id	acadia17_258r
in paper	()
authors	S?ndergaard, Asbj?rn, Jelle Feringa, Toke N?rbjerg, Kasper Steenstrup, David Brander, Jens Gravesen, Steen Markvorsen, Andreas B?rentzen, Kiril Petkov, Jesper Hattel, Kenn Clausen, Kasper Jensen, Lars Knudsen, and Jacob Kortbek
year	2016
title	Robotic Hot-Blade Cutting: An Industrial Approach to Cost-Effective Production of Double Curved Concrete Structures
source	Robotic Fabrication in Architecture, Art and Design 2016, edited by Dagmar Reinhardt, Rob Saunders, and Jane Burry, 150–164. Cham, Switzerland: Springer International Publishing
last changed	2017/11/21 09:56

_id	caadria2018_080kk
in paper	Teh, Priscilla, Leung, Chi Kwan, Ng, Cheryl, Amtsberg, Felix and Dritsas, Stylianos (2018) Robotic Fabrication of Lightweight Surface Assemblies - By Parametric Delamination of Polyurethane-Fabric Components
authors	S?ndergaard, SA, Feringa, FJ, N?rbjerg, NT, Steenstrup, SK, Brander, BD, Graversen, GJ, Markvorsen, MS, B?rentzen, BA, Petkov, PK, Hattel, HJ, Clausen, CK, Jensen, JK, Knudsen, KL and Kortbek, KJ
year	2016
title	Robotic Hot-Blade Cutting, An Industrial Approach to Cost-Effective Production of Double Curved Concrete Structures
source	Proceedings of Rob\|Arch: Robotic Fabrication in Architecture, Art, and Design 2016, Sydney, pp. 151-164
last changed	2018/05/29 12:42

_id	caadria2019_280yy
in paper	Hack, Norman, Lindemann, Hendrik and Kloft, Harald (2019) Adaptive Modular Spatial Structures for Shotcrete 3D Printing
authors	S?ndergaard,, A, Feringa, J, Stan, F and Maier, D
year	2019
title	Realization of Topology Optimized Concrete Structures Using Robotic Abrasive Wire-Cutting of Expanded Polystyrene Formwork
source	Robotic Fabrication in Architecture, Art and Design 2018, Zurich
last changed	2019/04/16 12:21

_id	ecaade2021_059zz
in paper	Lim, Ariel Cheng Sin and Thomsen, Mette Ramsgaard (2021) Multi-Material Fabrication for Biodegradable Structures - Enabling the printing of porous mycelium composite structures
authors	Saad, L
year	2016
title	Life cycle cost optimization of reinforced concrete structures
source	Ph.D. Thesis, Ecole supérieure d'ingénieurs de Beyrouth,
last changed	2021/08/09 14:31

_id	7198
in paper	Chitchian, Davood and Bekkering, Henco (2005) A Decision Support Tool for Decision Makers
authors	Saaty, T. L.
year	1977
title	A scaling method for priorities in hierarchical structures
source	Journal of Mathematical Psychology, 15, pp. 234-81
last changed	2005/08/25 07:57

_id	e9fb
in paper	Rodrigues, Daniel S.; Rui A.R. Ramos and José F.G. Mendes (2008) Decision support system for university campus qualityof life evaluation based on users’ perceptionA case study applied to the Campus of the University of Minho
authors	Saaty, T.L.
year	1977
title	A scaling method for priorities in hierarchical structures
source	Journal of Mathematical Psychology, 15(3), p. 234-281
last changed	2009/08/02 06:25

_id	ecaade2017_170j
in paper	Modesitt, Adam and Wendell, Augustus (2017) Interiority & Perception in Cinema - Digitally Reconstructing Space, Light, and Motion
authors	Sabina, JR, Valle, DG, Ruiz, CP, Garc, JMM and Laguna, AG
year	2015
title	Aerial Photogrammetry by drone in archaeological sites with large structures. Methodological approach and practical application in the medieval castles of Campo de Montiel
source	Virtual Archaeology Review, 6(13), pp. 5-19
last changed	2017/09/26 14:16

_id	ijac202321403u2
in paper	Tsoumpri, Dimitra (2023) Architectural space as an open, adaptable system: A design experiment
authors	Sabine L, van Vlissingen HF and Friedman Y
year	1999
title	Structures serving the unpredictable
source	Rotterdam: NAi Publishers, 1999
last changed	2024/05/29 13:53

For more results click below: