Cumincad : CUMINCAD References : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 5187

Reformat results as: short short into frame detailed detailed into frame

_id	c6a5
in paper	Grace, Kazjon S.; John S. Gero and Rob Saunders (2012) Constructing computational associations between ornamental designs
authors	Markman, A. and Gentner, D.
year	2005
title	Nonintentional similarity processing
source	The New Unconscious, Oxford University Press, New York, 107-137
last changed	2012/04/19 10:36

_id	caadria2022_357tt
in paper	Bedarf, Patrick, Szabo, Anna, Zanini, Michele, Heusi, Alex and Dillenburger, Benjamin (2022) Robotic 3D Printing of Mineral Foam for a Lightweight Composite Concrete Slab
authors	Bedarf, P., Szabo, A., Zanini, M. & Dillenburger, B.
year	2021
title	Machine Sensing for Mineral Foam 3D Printing
source	International Conference on Intelligent Robots and Systems: Workshop Robotic Fabrication, IROS 2021. https://doi.org/10.3929/ethz-b-000506097BubbleDeck. (2021). The Original Voided Slab. Retrieved May 11 2021, from https://www.bubbledeck.comCobiax. (2021). Voided flat plate slab technologies available worldwide. Retrieved May 11 2021, from https://www.cobiax.com/intl/en/Compas. (2020). Retrieved May 11 2021, from https://compas.dev/index.htmlFernández-Jiménez, A., & Palomo, A. (2005). Composition and microstructure of alkali activated fly ash binder: Effect of the activator. Cement and Concrete Research, 35(10), 1984–1992. https://doi.org/10.1016/j.cemconres.2005.03.003Furet, B., Poullain, P., & Garnier, S. (2019). 3D printing for construction based on a complex wall of polymer-foam and concrete. Additive Manufacturing, 28, 58–64. https://doi.org/10.1016/j.addma.2019.04.002Georgopoulos, C., & Minson, A. (2014). Sustainable concrete solutions. Wiley-Blackwell.Halpern, A. B., Billington, D. P., & Adriaenssens, S. (2013). The Ribbed Floor Slab Systems of Pier Luigi Nervi. Proceedings of the International Association for Shell and Spatial Structures (IASS), 7. http://formfindinglab.princeton.edu/wp-content/uploads/2011/09/Nervi_ribbed_floors.pdfHansemann, G., Schmid, R., Holzinger, C., Tapley, J. P., Peters, S., Trummer, A., & Kupelwieser, H. (2021). Lightweight Reinforced Concrete Slab: 130 different 3D printed voids. CPT Worldwide - Construction Printing Technology, 2021(2), 68.Jipa, A., Calvo Barentin, C., Lydon, G., Rippmann, M., Chousou, G., Lomaglio, M., Schlüter, A., Block, P., & Dillenburger, B. (2019). 3D-Printed Formwork for Integrated Funicular Concrete Slabs. Proceedings of the IASS Annual Symposium 2019, 10. https://www.researchgate.net/publication/335175125_3D-Printed_Formwork_for_Integrated_Funicular_Concrete_SlabsJipa, A., & Dillenburger, B. (2021). 3D Printed Formwork for Concrete: State-of-the-Art, Opportunities, Challenges, and Applications. 3D Printing and Additive Manufacturing, 00, 24. https://doi.org/10.1089/3dp.2021.0024Keating, S. J., Leland, J. C., Cai, L., & Oxman, N. (2017). Toward site-specific and self-sufficient robotic fabrication on architectural scales. Science Robotics, 2(5), 1-15. https://doi.org/10.1126/scirobotics.aam8986Liew, A., López, D. L., Van Mele, T., & Block, P. (2017). Design, fabrication and testing of a prototype, thin-vaulted, unreinforced concrete floor. Engineering Structures, 137, 323–335. https://doi.org/10.1016/j.engstruct.2017.01.075Palomo, A., Grutzeck, M. W., & Blanco, M. T. (1999). Alkali-activated fly ashes: A cement for the future. Cement and Concrete Research, 29(8), 1323–1329. https://doi.org/10.1016/S0008-8846(98)00243-9UN Environment Programme. (2020). Global Status Report for Buildings and Construction. Retrieved May 11 2021, from https://globalabc.org/sites/default/files/inline-files/2020%20Buildings%20GSR_FULL%20REPORT.pdfXu, H., & Van Deventer, J. S. J. (2000). The geopolymerisation of alumino-silicate minerals. International Journal of Mineral Processing, 59(3), 247–266. https://doi.org/10.1016/S0301-7516(99)00074-5Zhao, H., Gu, F., Huang, Q.-X., Garcia, J., Chen, Y., Tu, C., Benes, B., Zhang, H., Cohen-Or, D., & Chen, B. (2016). Connected fermat spirals for layered fabrication. ACM Transactions on Graphics, 35(4), 1–10. https://doi.org/10.1145/2897824.2925958
last changed	2022/06/16 12:18

_id	ijac201715204nn
in paper	Mesnil, Romain; Cyril Douthe, Olivier Baverel and Bruno Léger (2017) Generalised cyclidic nets for shape modelling in architecture
authors	Bobenko A and Schröder P.
year	2005
title	Discrete Willmore flow
source	Proceedings of the third Eurographics symposium on geometry processing, Vienna, 4–6 July 2005, p. 101. Geneva: Eurographics Association
last changed	2017/12/11 13:50

_id	caadria2020_443xx
in paper	Abuzuraiq, Ahmed M. and Erhan, Halil (2020) The Many Faces of Similarity - A Visual Analytics Approach for Design Space Simplification
authors	Bustos, B, Keim, DA, Saupe, D, Schreck, T and Vraniæ, DV
year	2005
title	Feature-based similarity search in 3D object databases
source	ACM Computing Surveys (CSUR), 37(4), pp. 345-387
last changed	2020/08/14 22:32

_id	ecaade2018_197mm
in paper	Fuchkina, Ekaterina, Schneider, Sven, Bertel, Sven and Osintseva, Iuliia (2018) Design Space Exploration Framework - A modular approach to flexibly explore large sets of design variants of parametric models within a single environment
authors	Bustos, B., Keim, D. A., Saupe, D., Schreck, T. and Vranic, D. V.
year	2005
title	Feature-based similarity search in 3d object databases
source	ACM Computing Surveys (CSUR), 37(4), p. 345-387
last changed	2018/07/24 13:26

_id	caadria2019_143jj
in paper	Kato, Yuri and Matsukawa, Shohei (2019) Development of Generating System for Architectural Color Icons Using Google Map Platform and Tensorflow-Segmentation
authors	Delon, J, Desolneux, A, Lisani, JL and Petro, AB
year	2005
title	Automatic color palette
source	IEEE International Conference on Image Processing 2005
last changed	2019/04/16 12:17

_id	27f2
in paper	Garagnani, Simone; Mingucci, Roberto; Luciani, Stefano Cinti (2012) Collaborative design for existing architecture: the Building Information Modeling as a frontier for coordinated process
authors	Früh, C., Jain, S. and Zakhor, A.
year	2005
title	Data Processing Algorithms for Generating Textured 3D Building Facade Meshes from Laser Scans and Camera Images
source	InternationalJournal of Computer Vision, 61 (2), 159-184
last changed	2013/01/09 11:16

_id	ecaade2014_149w34
in paper	Matthias Standfest (2014) Unsupervised Symmetric Polygon Mesh Mapping - The Dualism of Mesh Representation and Its Implementation for Many Layered Self-Organizing Map Architectures
authors	Gelfand, N, Mitra, NJ, Guibas, L and Pottmann, H
year	2005
title	Robust Global Registration
source	Eurographics Symposium on Geometry Processing 2005
last changed	2016/08/05 13:50

_id	caadria2017_113v29
in paper	Huang, Weixin, Lin, Yuming and Wu, Mingbo (2017) Spatial-Temporal Behavior Analysis Using Big Data Acquired by Wi-Fi Indoor Positioning System
authors	Gezici, S, Tian, Z, Giannakis, GB, Kobayashi, H, Molisch, AF, Poor, HV and Sahinoglu, Z
year	2005
title	Localization via ultra-wideband radios: a look at positioning aspects for future sensor networks
source	IEEE signal processing magazine, 22(4), pp 70-84
last changed	2017/03/29 08:54

_id	acadia17_373n
in paper	()
authors	Gezici, Sinan, Zhi Tian, Georgios B. Giannakis, Hisashi Kobayashi, Andreas F. Molisch, H. Vincent Poor, and Zafer Sahinoglu
year	2005
title	Localization Via Ultra-Wideband Radios: A Look at Positioning Aspects for Future Sensor Networks
source	IEEE Signal Processing Magazine 22 (4): 70–84
last changed	2017/11/21 10:00

_id	acadia17_366n
in paper	Lin, Yuming; Huang, Weixin (2017) Behavior Analysis and Individual Labeling Using Data from Wi-Fi IPS
authors	Gezici, Sinan, Zhi Tian, Georgios B. Giannakis, Hisashi Kobayashi, Andreas F. Molisch, H. Vincent Poor, and Zafer Sahinoglu
year	2005
title	Localization Via Ultra-Wideband Radios: A Look at Positioning Aspects for Future Sensor Networks
source	IEEE Signal Processing Magazine 22 (4): 70–84
last changed	2017/12/01 12:10

_id	fbff
in paper	Mohammad, Kareem El Sayed; Hanafi, Mohammad Assem; Nasr, Mohammad (2012) A Closer Perspective on Fabrication Realities
authors	Ion, J. C.
year	2005
title	Laser Processing of Engineering Materials: Principles, Procedure and Industrial Application
source	Butterworth-Heinemann, Oxford
last changed	2013/08/19 17:05

_id	caadria2022_421b2
in paper	Ng, Provides, Doria, David, Odaibat, Baha, Fernandez, Alberto and Karastathi, Nikoletta (2022) Decentralised Solar Economy: Unattended and Smart Solar Energy Urban System (UnSSEUS)
authors	Jiang, X., Polastre, J. & Culler, D.
year	2005
title	Perpetual environmentally powered sensor networks
source	IPSN 2005. Fourth International Symposium on Information Processing Sensor Networks, 2005 (pp. 463-468). IEEE
last changed	2022/06/16 12:28

_id	ecaade2017_255i
in paper	Heinrich, Mary Katherine, Ayres, Phil and Bar-Yam, Yaneer (2017) A Multiscale Model of Morphological Complexity in Cities - Characterising Emergent Homogeneity and Heterogeneity
authors	Jin, X and Davis, CH
year	2005
title	Automated building extraction from high-resolution satellite imagery in urban areas using structural, contextual, and spectral information
source	EURASIP Journal on Advances in Signal Processing, 2005(14), p. 2196-2206
last changed	2017/09/26 14:22

_id	bf10
in paper	Kelly, Nick and John S. Gero (2012) Computational modelling of the design conversation as a sequence of situated acts
authors	Jupp, J.
year	2005
title	Diagrammatic Reasoning in Design: Computational and Cognitive Studies in Similarity Assessment
source	PhD thesis, The University of Sydney, Sydney
last changed	2012/04/19 10:35

_id	ecaade2022_403t2
in paper	Çavuº, Özlem and Alaçam, Sema (2022) Precision Factors in Modelling of Relief Patterns on Thin Aluminum Plates - Learning from making process
authors	Kopac, J., & Kampus, Z.
year	2005
title	Incremental Sheet Metal Forming on CNC Milling Machine-Tool
source	Journal of materials processing technology, 162, pp. 622-628
last changed	2022/09/09 10:51

_id	acadia20_228q2
in paper	Alawadhi, Mohammad; Yan, Wei (2020) BIM Hyperreality
authors	Lyu, S., and H. Farid
year	2005
title	How Realistic Is Photorealistic?
source	IEEE Transactions on Signal Processing 53 (2): 845–850. https://doi.org/10.1109/TSP.2004.839896
last changed	2021/10/19 09:47

_id	ecaade2024_238e4
in paper	Mace, Carlotta; Danak, Khyati; Jacobson, Morgan; Correa, David (2024) Aspen Leaves as a Biological Role Model for a Triboelectric Wind Energy Harvesting Building Facade System
authors	M. E. Z. Y. K. Jureczko, Mariusz Pawlak, Arkadiusz Mê¿yk.
year	2005
title	Optimisation of wind turbine blades
source	Journal of materials processing technology 167, no. 2-3: 463-471
last changed	2024/08/28 15:21

_id	0b1d
in paper	Brito, Tiago, Fonseca, Manuel J. and Jorge, Joaquim A. (2005) DecoSketch – Towards Calligraphic Approaches to Interior Design
authors	Manuel Fonseca, Alfredo Ferreira Jr. e J Jorge
year	2005
title	Content-Based Retrieval of Technical Drawings
source	International Journal of Computer Applications in Technology (IJCAT) on “Models and methods for representing and processing shape semantics
last changed	2005/08/25 07:57

_id	caadria2023_244q
in paper	Cutellic, Pierre (2023) An Inverse Modeling Method to Estimate Uncertain Spatial Configurations From 2D Information and Time-Based Visual Discriminations
authors	Marois, R., & Ivanoff, J.
year	2005
title	Capacity Limits of Information Processing in the Brain
source	Trends in Cognitive Sciences, 9(6), 296-35. Available at: https://doi.org/1.116/j.tics.25.4.1
last changed	2023/06/15 11:40

For more results click below: