Cumincad : CUMINCAD References : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 7952

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2016_007k2
in paper	ElGhazi, Yomna Saad and Mahmoud, Ayman Hassaan Ahmed (2016) Origami Explorations - A Generative Parametric Technique For kinetic cellular façade to optimize Daylight Performance
authors	Schenk, M
year	2011
title	Folded Shell Structures
source	Ph.D. Thesis, University of Cambridge.
last changed	2016/08/05 14:04

_id	caadria2022_357tt
in paper	Bedarf, Patrick, Szabo, Anna, Zanini, Michele, Heusi, Alex and Dillenburger, Benjamin (2022) Robotic 3D Printing of Mineral Foam for a Lightweight Composite Concrete Slab
authors	Bedarf, P., Szabo, A., Zanini, M. & Dillenburger, B.
year	2021
title	Machine Sensing for Mineral Foam 3D Printing
source	International Conference on Intelligent Robots and Systems: Workshop Robotic Fabrication, IROS 2021. https://doi.org/10.3929/ethz-b-000506097BubbleDeck. (2021). The Original Voided Slab. Retrieved May 11 2021, from https://www.bubbledeck.comCobiax. (2021). Voided flat plate slab technologies available worldwide. Retrieved May 11 2021, from https://www.cobiax.com/intl/en/Compas. (2020). Retrieved May 11 2021, from https://compas.dev/index.htmlFernández-Jiménez, A., & Palomo, A. (2005). Composition and microstructure of alkali activated fly ash binder: Effect of the activator. Cement and Concrete Research, 35(10), 1984–1992. https://doi.org/10.1016/j.cemconres.2005.03.003Furet, B., Poullain, P., & Garnier, S. (2019). 3D printing for construction based on a complex wall of polymer-foam and concrete. Additive Manufacturing, 28, 58–64. https://doi.org/10.1016/j.addma.2019.04.002Georgopoulos, C., & Minson, A. (2014). Sustainable concrete solutions. Wiley-Blackwell.Halpern, A. B., Billington, D. P., & Adriaenssens, S. (2013). The Ribbed Floor Slab Systems of Pier Luigi Nervi. Proceedings of the International Association for Shell and Spatial Structures (IASS), 7. http://formfindinglab.princeton.edu/wp-content/uploads/2011/09/Nervi_ribbed_floors.pdfHansemann, G., Schmid, R., Holzinger, C., Tapley, J. P., Peters, S., Trummer, A., & Kupelwieser, H. (2021). Lightweight Reinforced Concrete Slab: 130 different 3D printed voids. CPT Worldwide - Construction Printing Technology, 2021(2), 68.Jipa, A., Calvo Barentin, C., Lydon, G., Rippmann, M., Chousou, G., Lomaglio, M., Schlüter, A., Block, P., & Dillenburger, B. (2019). 3D-Printed Formwork for Integrated Funicular Concrete Slabs. Proceedings of the IASS Annual Symposium 2019, 10. https://www.researchgate.net/publication/335175125_3D-Printed_Formwork_for_Integrated_Funicular_Concrete_SlabsJipa, A., & Dillenburger, B. (2021). 3D Printed Formwork for Concrete: State-of-the-Art, Opportunities, Challenges, and Applications. 3D Printing and Additive Manufacturing, 00, 24. https://doi.org/10.1089/3dp.2021.0024Keating, S. J., Leland, J. C., Cai, L., & Oxman, N. (2017). Toward site-specific and self-sufficient robotic fabrication on architectural scales. Science Robotics, 2(5), 1-15. https://doi.org/10.1126/scirobotics.aam8986Liew, A., López, D. L., Van Mele, T., & Block, P. (2017). Design, fabrication and testing of a prototype, thin-vaulted, unreinforced concrete floor. Engineering Structures, 137, 323–335. https://doi.org/10.1016/j.engstruct.2017.01.075Palomo, A., Grutzeck, M. W., & Blanco, M. T. (1999). Alkali-activated fly ashes: A cement for the future. Cement and Concrete Research, 29(8), 1323–1329. https://doi.org/10.1016/S0008-8846(98)00243-9UN Environment Programme. (2020). Global Status Report for Buildings and Construction. Retrieved May 11 2021, from https://globalabc.org/sites/default/files/inline-files/2020%20Buildings%20GSR_FULL%20REPORT.pdfXu, H., & Van Deventer, J. S. J. (2000). The geopolymerisation of alumino-silicate minerals. International Journal of Mineral Processing, 59(3), 247–266. https://doi.org/10.1016/S0301-7516(99)00074-5Zhao, H., Gu, F., Huang, Q.-X., Garcia, J., Chen, Y., Tu, C., Benes, B., Zhang, H., Cohen-Or, D., & Chen, B. (2016). Connected fermat spirals for layered fabrication. ACM Transactions on Graphics, 35(4), 1–10. https://doi.org/10.1145/2897824.2925958
last changed	2022/06/16 12:18

_id	sigradi2020_238nn2
in paper	Álvarez, Marcelo; Bernal, Marcelo; Castro, Carlos (2020) Modeling technique for vault-like structure generation through topological manipulation
authors	Bertin, T. B.
year	2011
title	Evaluating the Use of Particle-Spring Systems in the Conceptual Design of Grid Shell Structures
source	Worcester Polytechnic Institute
last changed	2021/08/27 16:00

_id	ca88
in paper	Beites, Steven (2013) Morphological Behavior of Shape Memory Polymers Toward a Deployable, Adaptive Architecture
authors	Falk, A. and P. von Buelow
year	2011
title	Form Exploration of Folded Plate Timber Structures based on Performance Criteria
source	Taller, Longer, Lighter: Meeting growing demand with limited resources, edited by D. Nethercot and S. Pellegrino. Proceedings of the 35th Annual Symposium of IABSE and the 52nd Annual Symposium of IASS. September 20–23, London, UK
last changed	2014/01/19 12:33

_id	acadia14projects_189an
in paper	Alkanoglu, Volkan (2014) Distortion
authors	Falk, Andreas and Buelow, Peter Von
year	2011
title	Form Exploration of Folded Plate Timber Structures based on Performance Criteria
source	Taller, Longer, Lighter: meeting growing demand with limited resources : IABSE-IASS Symposium 2011. London : Hemming Group Ltd.
last changed	2016/04/22 13:37

_id	acadia14_189an
in paper	Robeller, Christopher; Mayencourt, Paul; Weinand, Yves (2014) Snap-fit Joints: CNC fabricated, integrated mechanical attachment for structural wood panels
authors	Falk, Andreas and Buelow, Peter Von
year	2011
title	Form Exploration of Folded Plate Timber Structures based on Performance Criteria
source	Taller, Longer, Lighter: meeting growing demand with limited resources : IABSE-IASS Symposium 2011. London : Hemming Group Ltd.
last changed	2016/04/22 12:32

_id	acadia22_418nn4
in paper	Scheder-Bieschin, Lotte; Van Mele, Tom; Block, Philippe (2022) Curved-crease Folding of Bending-active Plates as Formwork
authors	H. Buri, I. Stotz, and Y. Weinand
year	2011
title	Curved Folded Plate Timber Structures
source	35th Annual Symposium of IABSE / 52nd AnnualSymposium of IASS / 6th International Conference on Space Structures: Taller, Longer, Lighter - Meeting Growing Demand with Limited Resources. London, UK
last changed	2024/04/17 15:42

_id	caadria2019_399nn
in paper	Houda, Maryam and Dias-da-Costa, Daniel (2019) Data Informed Branch Typologies for Structurally Optimised Curvilinear Surfaces - 3D Printed Mesh Density System (MDS) as Formwork for Concrete Shell Structures.
authors	Huijben, FAA, van Herwijnen, F and Nijsse, R
year	2011
title	Concrete shell structures revisited: introducing a new "Low-Tech" construction method using vacuumatics formwork
source	E. O?ate, B. Kröplin, & K-U. Bletzinger (Eds.), Structural membranes 2011 : V International Conference on Textile Composites and Inflatable Structures, Barcelona, Spain, pp. 409-420
last changed	2019/04/16 12:21

_id	ecaade2017_244mm
in paper	Chaltiel, Stephanie, Bravo, Maite and Chronis, Angelos (2017) Digital fabrication with Virtual and Augmented Reality for Monolithic Shells
authors	Huijben, HF, Van Herwijnen, FVH and Nijsse, RN
year	2011
title	Concrete Shell Structures Revisited: Introducing A New 'Low-Tech' Construction Method Using Vacuumatics Formwork
source	International Conference on Textile Composites and Inflatable Structures. STRUCTURAL MEMBRANES. E. O?ate, B. Kröplin and K.-U.Bletzinger (Eds), pp. 409-420
last changed	2017/09/26 14:21

_id	caadria2021_293j
in paper	Schling, Eike, Hsu, Chih-Lin and Ma, Muye (2021) Asymptotic Building Envelope - combining the benefits of asymptotic and principal curvature layouts
authors	Kiendl, J
year	2011
title	Isogeometric Analysis and Shape Optimal Design of Shell Structures
source	Ph.D. Thesis, Chair of Structural Analysis, Technical University Munich
last changed	2021/06/02 22:01

_id	f7b4
in paper	Larsen, Niels Martin ; Pedersen, Ole Egholm ; Pigram, Dave (2012) A Method for the Realization of Complex Concrete Gridshell Structures in Pre-Cast Concrete
authors	Lachauer, L., M. Rippmann, and P. Block
year	2011
title	Form Finding to Fabrication: A Digital Design Process for Masonry Vaults
source	Proceedings of the IASS. Shanghai: International Association for Shell and Spatial Structures. http://block.arch.ethz.ch/group/content/publications
last changed	2013/01/09 11:33

_id	8363
in paper	Correa, David; David Krieg, Oliver; Menges, Achim; Reichert, Steffen; Rinderspacher, Katja (2013) HygroSkin: A prototype project for the development of a constructional and climate responsive architectural system based on the elastic and hygroscopic properties of wood
authors	Lienhard, Julian, Schleicher, Simon, and Jan Knippers
year	2011
title	Bending-active Structures Research Pavilion ICD / ITKE
source	Proceedings of the Symposium of the International Association for Shell and Spatial Structures, 2011, London
last changed	2014/01/19 12:13

_id	b1c4
in paper	Krieg, Oliver David; Menges, Achim (2013) HygroSkin: A climate-responsive prototype project based on the elastic and hygroscopic properties of wood
authors	Lienhard, Julian, Schleicher, Simon, and Jan Knippers
year	2011
title	Bending-active Structures Research Pavilion ICD / ITKE
source	Proceedings of the Symposium of the International Association for Shell and Spatial Structures, London
last changed	2014/01/20 08:51

_id	caadria2023_148ww
in paper	Yu, Lance Marco, Tan, Ying Yi, Gupta, Sachin Sean and Tracy, Kenneth Joseph (2023) Towards a Tool Kit for Membrane Tensegrity Shells: Exploring the Relationship Between Struts and Geometry
authors	Pena, D.M., Llorens, I., Sastre, R., Crespo, D., & Martinez, J.
year	2011
title	Application of Tensegrity to Tensile-texture Constructions: Formfinding and Structural Analysis
source	Journal of the International Association for Shell and Spatial Structures, 52(2). Available at: https://doi.org/1.126/266-3511.25.1.57
last changed	2023/06/15 11:36

_id	ijac202119304g
in paper	Emami, Niloufar (2021) Disregarded solution spaces: A proposed approach to draw connections between computationally generated solution spaces and actual built case studies
authors	Ramm E.
year	2011
title	Morphogenesis and structural optimization of shell structures with the aid of a genetic algorithm
source	J Int Assoc Shell Spat Struct; 52: 143–154
last changed	2024/04/17 15:04

_id	caadria2018_273e
in paper	Yuan, Philip F., Wang, Xiang and Wang, Xiang (2018) Cellular Cavity Structure and its Application on a Long-Span Form-Found Shell Design
authors	Ramm, E
year	2011
title	From "Shell" to "Shell and Spatial" Structures
source	Mungan, I and Abel, JF (eds), Fifty Years of Progress for Shell and Spatial Structures, Multi-Sciences
last changed	2018/06/13 08:19

_id	ecaade2017_277zz
in paper	Borhani, Alireza and Kalantar, Negar (2017) APART but TOGETHER - The Interplay of Geometric Relationships in Aggregated Interlocking Systems
authors	Rippmann, M and Block, P
year	2011
title	Digital Stereotomy: Voussoir Geometry For Freeform Masonry-Like Vaults Informed By Structural And fabrication constraints
source	Proceedings of the International Association for Shell and Spatial Structures (IASS) Symposium
last changed	2017/09/26 14:24

_id	9e7b
in paper	Aish, Robert ; Fisher, Al ; Joyce, Sam ; Marsh, Andrew (2012) Progress Towards Multi-Criteria Design Optimisation Using Designscript With Smart Form, Robot Structural Analysis and Ecotect Building Performance Analysis"
authors	Shrubshall, C., and A. Fisher.
year	2011
title	The Practical Application of Structural Optimisation in the Design of the Louvre Abu Dhabi.
source	Proceedings of the International Association for Shell and Spatial Structures Symposium, London
last changed	2013/01/09 11:33

_id	2efb
in paper	Manahl, Markus; Milena Stavric, Albert Wiltsche (2012) Ornamental Discretisation of Free-form Surfaces
authors	Stavric, M. and Wiltsche, A.
year	2011
title	Ornamental Plate Shell Structures
source	CAAD Futures Conference Proceedings, 817-832
last changed	2013/01/09 11:22

_id	d722
in paper	Manahl, Markus; Heimo Schimek, Emmanuel Ruffo Calderon Dominguez and Albert Wiltsche (2012) Ornamental discretisation of free-form surfaces: Developing digital tools to integrate design rationalisation with the form finding process
authors	Stavric, M. and Wiltsche, A.
year	2011
title	Ornamental plate shell structures
source	Proc. 14th CAAD Futures Conference, Liège, 817-832
last changed	2012/04/19 10:36

For more results click below: