Cumincad : CUMINCAD References : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 6713

Reformat results as: short short into frame detailed detailed into frame

_id	ijac202119105d
in paper	Zhang, Viola; David Rosenwasser, and Jenny E. Sabin (2021) PolyTile 2.0: Programmable microtextured ceramic architectural tiles embedded with environmentally responsive biofunctionality
authors	Sabin J, Miller M, Cassab N, et al.
year	2014
title	PolyBrick: variegated additive ceramic component manufacturing (ACCM).
source	3DPrint Addit Manuf; 1: 78–84.
last changed	2021/06/07 15:48

_id	caadria2020_257h
in paper	Lu, Yao, Birol, Eda Begum, Johnson, Colby, Hernandez, Christopher and Sabin, Jenny (2020) A Method for Load-responsive Inhomogeneity and Anisotropy in 3D Lattice Generation Based on Ellipsoid Packing
authors	Sabin, J, Miller, M, Cassab, N and Lucia, A
year	2014
title	PolyBrick: Variegated Additive Ceramic Component Manufacturing (ACCM)
source	3D PRINTING, 1(2), pp. 78-84
last changed	2020/08/14 22:32

_id	acadia19_222tt
in paper	Birol, Eda Begum; Lu, Yao; Sekkin, Ege; Johnson, Colby; Moy, David; Islam, Yaseen; Sabin, Jenny (2019) POLYBRICK 2.0
authors	Sabin, J., M. Miller, N. Cassab, and A. Lucia.
year	2014
title	PolyBrick: Variegated Additive Ceramic Component Manufacturing (ACCM)
source	3D Printing and Additive Manufacturing 1(2): 78–84. doi:10.1089/3dp.2014.0012
last changed	2019/12/18 09:06

_id	acadia19_246r
in paper	Zhang, Viola; Qian, William; Sabin, Jenny (2019) PolyBrickH2.0
authors	Sabin, Jenny E., Martin Miller, Nicholas Cassab, and Andrew Lucia.
year	2014
title	PolyBrick: Variegated Additive Ceramic Component Manufacturing (ACCM)
source	3D Printing and Additive Manufacturing 1(2): 78-84. doi:10.1089/3dp.2014.0012
last changed	2019/12/18 09:06

_id	acadia18_276dd
in paper	Bilotti, Jeremy; Norman, Bennett; Rosenwasser, David; Leo Liu, Jingyang; Sabin, Jenny (2018) Robosense 2.0. Robotic sensing and architectural ceramic fabrication
authors	Sabin, Jenny, Martin Miller, Nicholas Cassab, and Andrew Lucia
year	2014
title	PolyBrick: Variegated Additive Ceramic Component Manufacturing (ACCM)
source	3D Printing and Additive Manufacturing 1 (2)
last changed	2019/01/25 08:42

_id	acadia17_502d
in paper	Rosenwasser, David; Mantell, Sonya; Sabin, Jenny (2017) Clay Non-Wovens: Robotic Fabrication and Digital Ceramics
authors	Sabin, Jenny, Miller, Martin, Cassab, Nicholas and Lucia, Nicholas
year	2014
title	PolyBrick: Variegated Additive Ceramic Component Manufacturing (ACCM)
source	3D Printing and Additive Manufacturing 1 (2): 78–84
last changed	2017/12/01 12:12

_id	acadia17_511d
in paper	()
authors	Sabin, Jenny, Miller, Martin, Cassab, Nicholas and Lucia, Nicholas
year	2014
title	PolyBrick: Variegated Additive Ceramic Component Manufacturing (ACCM)
source	3D Printing and Additive Manufacturing 1 (2): 78–84
last changed	2017/11/21 10:02

_id	sigradi2016_771s
in paper	Raspall, Felix; Ba?ón, Carlos (2016) vMESH : How to print Architecture?
year	2015
title	New opportunities to optimize structural designs in metal by using additive manufacturing
source	Advances Architectural Geometry 2014 (pp. 79-93). Springer International Publishing
last changed	2017/07/25 11:17

_id	caadria2022_357tt
in paper	Bedarf, Patrick, Szabo, Anna, Zanini, Michele, Heusi, Alex and Dillenburger, Benjamin (2022) Robotic 3D Printing of Mineral Foam for a Lightweight Composite Concrete Slab
authors	Bedarf, P., Szabo, A., Zanini, M. & Dillenburger, B.
year	2021
title	Machine Sensing for Mineral Foam 3D Printing
source	International Conference on Intelligent Robots and Systems: Workshop Robotic Fabrication, IROS 2021. https://doi.org/10.3929/ethz-b-000506097BubbleDeck. (2021). The Original Voided Slab. Retrieved May 11 2021, from https://www.bubbledeck.comCobiax. (2021). Voided flat plate slab technologies available worldwide. Retrieved May 11 2021, from https://www.cobiax.com/intl/en/Compas. (2020). Retrieved May 11 2021, from https://compas.dev/index.htmlFernández-Jiménez, A., & Palomo, A. (2005). Composition and microstructure of alkali activated fly ash binder: Effect of the activator. Cement and Concrete Research, 35(10), 1984–1992. https://doi.org/10.1016/j.cemconres.2005.03.003Furet, B., Poullain, P., & Garnier, S. (2019). 3D printing for construction based on a complex wall of polymer-foam and concrete. Additive Manufacturing, 28, 58–64. https://doi.org/10.1016/j.addma.2019.04.002Georgopoulos, C., & Minson, A. (2014). Sustainable concrete solutions. Wiley-Blackwell.Halpern, A. B., Billington, D. P., & Adriaenssens, S. (2013). The Ribbed Floor Slab Systems of Pier Luigi Nervi. Proceedings of the International Association for Shell and Spatial Structures (IASS), 7. http://formfindinglab.princeton.edu/wp-content/uploads/2011/09/Nervi_ribbed_floors.pdfHansemann, G., Schmid, R., Holzinger, C., Tapley, J. P., Peters, S., Trummer, A., & Kupelwieser, H. (2021). Lightweight Reinforced Concrete Slab: 130 different 3D printed voids. CPT Worldwide - Construction Printing Technology, 2021(2), 68.Jipa, A., Calvo Barentin, C., Lydon, G., Rippmann, M., Chousou, G., Lomaglio, M., Schlüter, A., Block, P., & Dillenburger, B. (2019). 3D-Printed Formwork for Integrated Funicular Concrete Slabs. Proceedings of the IASS Annual Symposium 2019, 10. https://www.researchgate.net/publication/335175125_3D-Printed_Formwork_for_Integrated_Funicular_Concrete_SlabsJipa, A., & Dillenburger, B. (2021). 3D Printed Formwork for Concrete: State-of-the-Art, Opportunities, Challenges, and Applications. 3D Printing and Additive Manufacturing, 00, 24. https://doi.org/10.1089/3dp.2021.0024Keating, S. J., Leland, J. C., Cai, L., & Oxman, N. (2017). Toward site-specific and self-sufficient robotic fabrication on architectural scales. Science Robotics, 2(5), 1-15. https://doi.org/10.1126/scirobotics.aam8986Liew, A., López, D. L., Van Mele, T., & Block, P. (2017). Design, fabrication and testing of a prototype, thin-vaulted, unreinforced concrete floor. Engineering Structures, 137, 323–335. https://doi.org/10.1016/j.engstruct.2017.01.075Palomo, A., Grutzeck, M. W., & Blanco, M. T. (1999). Alkali-activated fly ashes: A cement for the future. Cement and Concrete Research, 29(8), 1323–1329. https://doi.org/10.1016/S0008-8846(98)00243-9UN Environment Programme. (2020). Global Status Report for Buildings and Construction. Retrieved May 11 2021, from https://globalabc.org/sites/default/files/inline-files/2020%20Buildings%20GSR_FULL%20REPORT.pdfXu, H., & Van Deventer, J. S. J. (2000). The geopolymerisation of alumino-silicate minerals. International Journal of Mineral Processing, 59(3), 247–266. https://doi.org/10.1016/S0301-7516(99)00074-5Zhao, H., Gu, F., Huang, Q.-X., Garcia, J., Chen, Y., Tu, C., Benes, B., Zhang, H., Cohen-Or, D., & Chen, B. (2016). Connected fermat spirals for layered fabrication. ACM Transactions on Graphics, 35(4), 1–10. https://doi.org/10.1145/2897824.2925958
last changed	2022/06/16 12:18

_id	caadria2019_660j
in paper	Aghaei Meibodi, Mania, Giesecke, Rena and Dillenburger, Benjamin (2019) 3D Printing Sand Molds for Casting Bespoke Metal Connections - Digital Metal: Additive Manufacturing for Cast Metal Joints in Architecture
authors	Bhavar, V, Forge, B and Kattire, P
year	2014
title	A review on powder bed fusion technology of metal additive manufacturing Cryogenic View project additive manufacturing View project
source	4th International Conference and Exhibition on Additive Manufacturing Technologies-AM-2014, pp. 1-2
last changed	2019/04/16 12:09

_id	acadia19_100ee
in paper	Meibodi, Mania Aghae; Kladeftira, Marirena; Kyttas, Thodoris; Dillenburger, Benjamin (2019) Bespoke Cast Facade
authors	Bhavar, Valmik, Bharat Forge, and Prakash Kattire.
year	2014
title	A Review on Powder Bed Fusion Technology of Metal Additive Manufacturing
source	4th International conference and exhibition on Additive Manufacturing Technologies. Banglore, India
last changed	2019/12/18 09:05

_id	acadia22_346u2
in paper	Rossi, Gabriella; Chiujdea, Ruxandra-Stefania; Hochegger, Laura; Lharchi, Ayoub; Nicholas, Paul; Tamke, Martin; Ramsgaard Thomsen, Mette (2022) Integrated Design Strategies for Multi-scalar Biopolymer Robotic 3D Printing
authors	Chee Kai Chua and Kah Fai Leong
year	2014
title	3D Printing and Additive Manufacturing: Principles and Applications (with Companion Media Pack)
source	Rapid Prototyping, 4th ed. World Scientific Publishing Company
last changed	2024/04/17 15:39

_id	caadria2017_002m1
in paper	Haeusler, M. Hank, Muehlbauer, Manuel, Bohnenberger, Sascha and Burry, Jane (2017) Furniture Design Using Custom-Optimised Structural Nodes
authors	Galjaard, S, Hoffman, S and Ren, S
year	2015
title	New Opportunities to Optimize Structural Designs in Metal by Using Additive Manufacturing
source	P Block et al (eds), Advances in Architectural Geometry 2014, Springer, Switzerland, pp 79-92
last changed	2017/03/29 08:54

_id	caadria2018_215x
in paper	Raspall, Felix and Banon, Carlos (2018) 3D Printing Architecture: Towards Functional Space Frames
authors	Galjaard, S, Hofman, S and Ren, S
year	2015
title	New opportunities to optimize structural designs in metal by using additive manufacturing
source	Advances in Architectural Geometry 2014, Springer, Cham., pp. 79-93
last changed	2018/06/13 08:18

_id	caadria2017_031j11
in paper	Crolla, Kristof, Williams, Nicholas, Muehlbauer, Manuel and Burry, Jane (2017) SmartNodes Pavilion - Towards Custom-optimized Nodes Applications in Construction
authors	Galjaard, S, Hofman, S and Shibo, R
year	2015
title	New Opportunities to Optimize Structural Designs in Metal by Using Additive Manufacturing
source	Block, P, Knippers, J, Mitra, NJ and Wang, W (eds), Advances in Architectural Geometry 2014, Springer, pp 79-93
last changed	2017/03/29 08:54

_id	acadia18_312ff
in paper	Ariza, Inés; Mirjan, Ammar; Gandia, Augusto; Casas, Gonzalo; Cros, Samuel; Gramazio, Fabio; Kohler, Matthias. (2018) In Place Detailing. Combining 3D printing and robotic assembly
authors	Galjaard, Salomé, Sander Hofman, and Shibo Ren
year	2015
title	New Opportunities to Optimize Structural Designs in Metal by Using Additive Manufacturing
source	Advances in Architectural Geometry 2014, edited by Philippe Block, Jan Knippers, J. Mitra Niloy, and Wenping Wang, 79–93. Cham, Switzerland: Springer International Publishing
last changed	2019/01/25 08:42

_id	acadia19_586yy
in paper	Mitterberger, Daniela; Derme, Tiziano (2019) Soil 3D Printing
authors	Gibson, I., D.W. Rosen, and B. Stucker.
year	2014
title	Development of Additive Manufacturing Technology
source	Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing, 19-42. New York/Heidelberg/Dordrecht/London: Springer
last changed	2019/12/18 09:13

_id	caadria2022_299ff2
in paper	Cui, Qiang, Zhang, Huikai, Pawar, Siddharth Suhas, Yu, Chuan, Feng, Xiqiao and Qiu, Song (2022) Topology Optimization for 3D-Printable Large-Scale Metallic Hollow Structures With Self-Supporting
authors	Guo, X., Zhang, W. S. & Zhong, W. L.
year	2014
title	Doing topology optimization explicitly and geometrically-a new moving morphable components based framework
source	Journal of Applied Mechanics, 81, 081009. https://doi.org/10.1115/1.4027609He, L. W., Matthew, G., & Song, X. Y. (2019). A python script for adaptive layout optimization of trusses. Structural and Multidisciplinary Optimization, 60, 835-847. https://doi.org/10.1007/s00158-019-02226-6Liu, J. K., Gaynor A. T., Chen, S. k., Kang, Z., Suresh, K., Takezawa, A., Li, L., Kato, J. J, Tang, J. Y., Wang, Charlie C. L., Cheng, L., Liang, X., & To, A. C. (2018). Current and future trends in topology optimization for additive manufacturing. Structural and Multidisciplinary Optimization, 57, 2457–2483. https://doi.org/10.1007/s00158-018-1994-3Parkes, E. W. (1975) Joints in optimization frameworks. International Journal of Solids and Structures, 11, 1017-1022
last changed	2022/06/16 12:18

_id	ecaade2020_348h
in paper	Chiujdea, Ruxandra Stefania and Nicholas, Paul (2020) Design and 3D Printing Methodologies for Cellulose-based Composite Materials
authors	Laarman, J, Jokic, S, Novikov, P, Fraguada, LE and Markopoulou, A
year	2014
title	Anti-Gravity Additive Manufacturing
source	Gramazio, F, Kohler, M and Langenberg, S (eds), Fabricate 2014: Negotiating Design & Making, UCL Press, pp. 192-197
last changed	2020/09/09 13:54

_id	ecaade2022_76q
in paper	Zboinska, Malgorzata A., Mjörnell, Isac, Oguz, Sebastian, Rudin, Rebecka and Skanberg Dahlstedt, Toste (2022) Non-Standard Robotic 3D Printing for Architects - A comprehensive digital fabrication lab pedagogy integrating non-programmable material effects
authors	Laarman, J., Jokic, S., Novikov, P., Fraguada, L.E. and Markopoulou, A.
year	2014
title	Anti-gravity additive manufacturing
source	Gramazio, F., Kohler, M. and Langenberg, S. (eds.) Fabricate: Negotiating Design & Making. London: UCL Press, pp. 192-197
last changed	2022/09/09 10:51

For more results click below: