Cumincad : CUMINCAD References : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 2828

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2022_272m
in paper	Soman, Aditya, Azadi, Shervin and Nourian, Pirouz (2022) DeciGenArch - A generative design methodology for participatory architectural configuration via multi-criteria decision analysis
authors	Azadi, S. and Nourian, P.
year	2020
title	topoGenesis: Initial Pre-release
source	Zenodo. doi: 10.5281/ZENODO.4006514
last changed	2022/09/09 11:01

_id	ecaade2021_027xx
in paper	Yuan, Chao, Zhang, Xiao, Zeng, Shaoting, Yang, Liu, Zhao, Zhilong and Qiu, Song (2021) Topology Reconstruction of a Discontinuous B-rep Geometry by using Form Finding Method
authors	Field, David A
year	2020
title	Qualitative measures for initial meshes[J]
source	International Journal for Numerical Methods in Engineering, 47(4), pp. 887-906
last changed	2021/08/09 14:53

_id	caadria2022_184kk
in paper	Sateei, Shahin, Roup, Mattias and Johansson, Mikael (2022) Collaborative Design Review Sessions in Virtual Reality: Multi-Scale and Multi-User
authors	Frelin, A. & Grannäs, J.,
year	2020
title	Teachers’ pre-occupancy evaluation of affordances in a multi-zone flexible learning environment – introducing an analytical model
source	Pedagogy, Culture & Society. https://doi.org/10.1080/14681366.2020.1797859
last changed	2022/06/16 10:42

_id	caadria2021_115t
in paper	Chen, Qin Chuan, Lakshmi Narasimhan, Vaishnavi and Lee, Hyunsoo (2021) The potential of IoT-based smart environment in reaction to COVID-19 pandemic
authors	Gibson, PG, Qin, L and Puah, SH
year	2020
title	COVID-19 acute respiratory distress syndrome (ARDS): clinical features and differences from typical pre COVID-19 ARDS
source	Med J Aust., 213(2), pp. 54-56
last changed	2021/06/02 22:41

_id	caadria2023_217g
in paper	Jansen, Igor, Pi¹tek, £ukasz, Cygan, Marta, Hlebowicz, Jakub, Krajewski, Bartosz, Miszewicz, Agata, Nowacka, Agnieszka, Roguski, Bart³omiej and Szabelewska, Marta (2023) Automating the Architectural Design of Apartment Point Block
authors	Jansen, I., & Pitek, .
year	2020
title	The Evolutionary-algorithm-based Automation of the Initial Stage of Apartment Building Design
source	D1.T1.S3. Design and Computation of Urban and Local System, XS to XL Vol.2,eCAADe 38 \| 15
last changed	2023/06/15 11:38

_id	caadria2022_263j
in paper	Gough, Phillip, Globa, Anastasia and Reinhardt, Dagmar (2022) Computational Design with Myco-Materials
authors	Konietzko, J., Bocken, N. & Hultink, E. J.
year	2020
title	Circular ecosystem innovation: An initial set of principles
source	Journal of Cleaner Production, 253, 119942
last changed	2022/06/16 12:26

_id	dc6f
in paper	Day, Alan (1992) Multimedia Tools for the Investigation of Architectural History
authors	Davis, H. and Rush, D.
year	1991
title	Microcosm, Pre-Release Documentation
source	University of Southampton
last changed	2002/07/04 18:11

_id	acadia22_208ii2
in paper	Blaney, Adam; Ozkan, Dilan; Pelit, Emel; Fonseca Braga, Mariana; Hardy, John G.; Ashton, Mark ; , (2022) Parametric Matter
authors	A Blaney
year	2020
title	Designing Parametric Matter: Exploring adaptive self-assembly through tuneable environments
source	PhD thesis, LancasterUniversity
last changed	2024/04/17 15:37

_id	acadia22_506n3
in paper	Ozarisoy, Bertug; Altan, Hasim (2022) Passive Cooling Strategies for Thriving in a Changing Climate
authors	A Mahdavi
year	2020
title	In the matter of simulation and buildings: some critical reflections
source	Journal of Building Performance Simulation 13 (1): 26–33
last changed	2024/04/17 15:43

_id	acadia22_58gg2
in paper	Anton, Ana; Skevaki, Eleni; Bischof, Patrick; Reiter, Lex; Dillenburger, Benjamin (2022) Column-Slab Interfaces for 3D Concrete Printing
authors	A. Anton, A. Jipa, L. Reiter, and B. Dillenburger
year	2020
title	Fast Complexity: Additive Manufacturing for Prefabricated Concrete Slabs
source	DigitalConcrete 2020; Paper Proceedings of the Second RILEM InternationalConference on Concrete and Digital Fabrication. Cham: Springer. 1067–77.
last changed	2024/04/17 15:35

_id	acadia21_302d
in paper	Diniz, Nancy; Melendez, Frank (2021) Inoculated Matter
authors	A. Goidea, D. Floudas, and D. Andreen
year	2020
title	Pulp Faction, 3D printed material assemblies through microbial biotransformation
source	Fabricate 2020: Making Resilient Architecture Conference, London: UCL Press
last changed	2024/01/09 08:06

_id	acadia22_418xx4
in paper	Scheder-Bieschin, Lotte; Van Mele, Tom; Block, Philippe (2022) Curved-crease Folding of Bending-active Plates as Formwork
authors	A. Kudless, J. Zabel, C. Naeve, and T. Florian
year	2020
title	The Design and Fabrication of Confluence Park
source	Fabricate 2020. London: UCL Press. 28–35
last changed	2024/04/17 15:42

_id	acadia22_506o3
in paper	Ozarisoy, Bertug; Altan, Hasim (2022) Passive Cooling Strategies for Thriving in a Changing Climate
authors	A. Mavrigiannaki, K. Gobakis, D. Kolokotsa, A. L. Pisello, C. Piselli, R. Gupta, M. Gregg, M. Laskari, M. Saliari, M.-K. Assimakopoulos , and A. Synnefa
year	2020
title	Measurement and verification of zero energy settle- ments: Lessons learned from four pilot cases in Europe
source	Sustainability12 (22): 1–16
last changed	2024/04/17 15:43

_id	acadia22_318x
in paper	Maierhofer, Mathias; Menges, Achim (2022) Methods for Integrating Architectural Design Intent into the Agent-based Design of (Adaptive) Truss Structures
authors	A. Ostertag, M. Dazer, B. Bertsche, F. Schlegl, S. Albrecht, P. Leistner, A. Gienger, J. Wagner, C. Tarín, and O. Sawodny
year	2020
title	Reliable Design of Adaptive Load-Bearing Structures with Focus on Sustainability
source	Proceeding of the 30th European Safety and Reliability Conference and15th Probabilistic Safety Assessment and Management Conference. Venice, Italy. 4703–10
last changed	2024/04/17 15:39

_id	acadia21_112w
in paper	Kahraman, Ridvan; Zechmeister, Christoph; Dong, Zhetao; Oguz, Ozgur S.; Drachenberg, Kurt; Menges, Achim; Rinderspacher, Katja (2021) Augmenting Design
authors	A. Plumerault, H. Le Borgne, and C. Hudelot
year	2020
title	Controlling Generative Models with Continuous Factors of Variations
source	ArXiv
last changed	2024/01/09 07:52

_id	caadria2022_299hh2
in paper	Cui, Qiang, Zhang, Huikai, Pawar, Siddharth Suhas, Yu, Chuan, Feng, Xiqiao and Qiu, Song (2022) Topology Optimization for 3D-Printable Large-Scale Metallic Hollow Structures With Self-Supporting
authors	Aage, N., Andreassen, E., Lazarov B. S. & Sigmund, O.
year	2017
title	Giga-voxel computational morphogenesis for structural design
source	Nature, 550, 84-86. https://doi.org/10.1038/nature23911Bai, J. T., & Zuo, W. J. (2020). Hollow structural design in topology optimization via moving morphable component method. Structural and Multidisciplinary Optimization, 6, 187-205
last changed	2022/06/16 12:18

_id	ijac202220217n2
in paper	Taghizadeh, Katayoun; Tayebe Yavari Roushan; Maryam Alizadeh (2022) Liability in BIM projects—Preliminary review results
authors	Abd-Jamil AH and Fathi MS
year	2020
title	Enhancing BIM-based information interoperability: dispute resolution from legal and contractual perspectives
source	J Construction Eng Manag 2020; 146(7): 1–12.
last changed	2024/04/17 15:18

_id	ecaade2024_47yy4
in paper	Alymani, Abdulrahman Ahmed A (2024) Integrating Artificial Intelligence Rendering Tools in Design: Integrating AI as teaching methods in architectural education
authors	Abdelhamid, T. G.
year	2020
title	A 10-Step Design Process for Architectural Design Studios
source	Advances in Science, Technology and Innovation, 1, pp. 1-11. doi: 10.1007/978-3-030-32922-8_1
last changed	2024/08/28 15:21

_id	ijac202321308gg4
in paper	Xu, Hang; Tsung-Hsien Wang (2023) A generative computational workflow to develop actionable renovation strategies for renewable built environments: A case study of Sheffield
authors	Abdul-Ganiyu S, Quansah DA, Ramde EW, et al
year	2020
title	Investigation of solar photovoltaic-thermal (PVT) and solar photovoltaic (PV) performance: a case study in Ghana
source	Energies 2020; 13(11): 2701.
last changed	2024/05/29 14:01

_id	sigradi2021_280o2
in paper	Banda, Pablo, García-Alvarado, Rodrigo and Munoz-Sanguinetti, Claudia (2021) Architectural Digital Design for 3D Printing Housing: Search for 3D Printing in Construction Trends for a Design Methodology
authors	Abou Yassin, A. A., Hamzeh, F., & al Sakka, F.
year	2020
title	Agent based modeling to optimize workflow of robotic steel and concrete 3D printers
source	Automation in Construction, 110 (November 2019), 103040. https://doi.org/10.1016/j.autcon.2019.103040
last changed	2024/03/08 14:34

For more results click below: