Cumincad : CUMINCAD References : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 7055

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2022_357tt
in paper	Bedarf, Patrick, Szabo, Anna, Zanini, Michele, Heusi, Alex and Dillenburger, Benjamin (2022) Robotic 3D Printing of Mineral Foam for a Lightweight Composite Concrete Slab
authors	Bedarf, P., Szabo, A., Zanini, M. & Dillenburger, B.
year	2021
title	Machine Sensing for Mineral Foam 3D Printing
source	International Conference on Intelligent Robots and Systems: Workshop Robotic Fabrication, IROS 2021. https://doi.org/10.3929/ethz-b-000506097BubbleDeck. (2021). The Original Voided Slab. Retrieved May 11 2021, from https://www.bubbledeck.comCobiax. (2021). Voided flat plate slab technologies available worldwide. Retrieved May 11 2021, from https://www.cobiax.com/intl/en/Compas. (2020). Retrieved May 11 2021, from https://compas.dev/index.htmlFernández-Jiménez, A., & Palomo, A. (2005). Composition and microstructure of alkali activated fly ash binder: Effect of the activator. Cement and Concrete Research, 35(10), 1984–1992. https://doi.org/10.1016/j.cemconres.2005.03.003Furet, B., Poullain, P., & Garnier, S. (2019). 3D printing for construction based on a complex wall of polymer-foam and concrete. Additive Manufacturing, 28, 58–64. https://doi.org/10.1016/j.addma.2019.04.002Georgopoulos, C., & Minson, A. (2014). Sustainable concrete solutions. Wiley-Blackwell.Halpern, A. B., Billington, D. P., & Adriaenssens, S. (2013). The Ribbed Floor Slab Systems of Pier Luigi Nervi. Proceedings of the International Association for Shell and Spatial Structures (IASS), 7. http://formfindinglab.princeton.edu/wp-content/uploads/2011/09/Nervi_ribbed_floors.pdfHansemann, G., Schmid, R., Holzinger, C., Tapley, J. P., Peters, S., Trummer, A., & Kupelwieser, H. (2021). Lightweight Reinforced Concrete Slab: 130 different 3D printed voids. CPT Worldwide - Construction Printing Technology, 2021(2), 68.Jipa, A., Calvo Barentin, C., Lydon, G., Rippmann, M., Chousou, G., Lomaglio, M., Schlüter, A., Block, P., & Dillenburger, B. (2019). 3D-Printed Formwork for Integrated Funicular Concrete Slabs. Proceedings of the IASS Annual Symposium 2019, 10. https://www.researchgate.net/publication/335175125_3D-Printed_Formwork_for_Integrated_Funicular_Concrete_SlabsJipa, A., & Dillenburger, B. (2021). 3D Printed Formwork for Concrete: State-of-the-Art, Opportunities, Challenges, and Applications. 3D Printing and Additive Manufacturing, 00, 24. https://doi.org/10.1089/3dp.2021.0024Keating, S. J., Leland, J. C., Cai, L., & Oxman, N. (2017). Toward site-specific and self-sufficient robotic fabrication on architectural scales. Science Robotics, 2(5), 1-15. https://doi.org/10.1126/scirobotics.aam8986Liew, A., López, D. L., Van Mele, T., & Block, P. (2017). Design, fabrication and testing of a prototype, thin-vaulted, unreinforced concrete floor. Engineering Structures, 137, 323–335. https://doi.org/10.1016/j.engstruct.2017.01.075Palomo, A., Grutzeck, M. W., & Blanco, M. T. (1999). Alkali-activated fly ashes: A cement for the future. Cement and Concrete Research, 29(8), 1323–1329. https://doi.org/10.1016/S0008-8846(98)00243-9UN Environment Programme. (2020). Global Status Report for Buildings and Construction. Retrieved May 11 2021, from https://globalabc.org/sites/default/files/inline-files/2020%20Buildings%20GSR_FULL%20REPORT.pdfXu, H., & Van Deventer, J. S. J. (2000). The geopolymerisation of alumino-silicate minerals. International Journal of Mineral Processing, 59(3), 247–266. https://doi.org/10.1016/S0301-7516(99)00074-5Zhao, H., Gu, F., Huang, Q.-X., Garcia, J., Chen, Y., Tu, C., Benes, B., Zhang, H., Cohen-Or, D., & Chen, B. (2016). Connected fermat spirals for layered fabrication. ACM Transactions on Graphics, 35(4), 1–10. https://doi.org/10.1145/2897824.2925958
last changed	2022/06/16 12:18

_id	ijac202321301c
in paper	Bedarf, Patrick; Anna Szabo; Enrico Scoccimarro; Benjamin Dillenburger (2023) Foamwork: Challenges and strategies in using mineral foam 3D printing for a lightweight composite concrete slab
authors	Hansemann G, Schmid R, Holzinger C, et al
year	2021
title	Lightweight Reinforced Concrete Slab: 130 different 3D printed voids.
source	CPT Worldw - Constr Print Technol 2021; 2021(2): 68
last changed	2024/05/29 14:01

_id	caadria2023_311m2
in paper	*Wu, Hao, Gu, Sijia, Gao, Xiaofan, Luo, Jiaxiang and F. Yuan, Philip (2023) Extrusion-to-Masoning: Robotic 3D Concrete Printing of Concrete Shells As Building Floor System**
authors	Hansemann, G., Schmid, R., Holzinger, C., Tapley, J. P., Peters, S., Trummer, A., & Kupelwieser, H.
year	2021
title	Lightweight Reinforced Concrete Slab: 130 Different 3D Printed Voids
source	CPT Worldwide-Construction Printing Technology, 221(2), 68
last changed	2023/06/15 11:45

_id	acadia22_58a3
in paper	Anton, Ana; Skevaki, Eleni; Bischof, Patrick; Reiter, Lex; Dillenburger, Benjamin (2022) Column-Slab Interfaces for 3D Concrete Printing
authors	Aya Shaker, Noor Khader, Lex Reiter, and Ana Anton
year	2021
title	3D Printed Concrete Tectonics: Assembly Typologies for Dry Joints
source	ACADIA21: Realignments: Toward Critical Computation; Paper Proceedingsof the 40th Annual Conference of the Association for Computer AidedDesign in Architecture (ACADIA). 1–9
last changed	2024/04/17 15:35

_id	acadia22_346jj2
in paper	Rossi, Gabriella; Chiujdea, Ruxandra-Stefania; Hochegger, Laura; Lharchi, Ayoub; Nicholas, Paul; Tamke, Martin; Ramsgaard Thomsen, Mette (2022) Integrated Design Strategies for Multi-scalar Biopolymer Robotic 3D Printing
authors	Aya Shaker, Nour Khader, Lex Reiter, and Ana Anton
year	2021
title	3D Printed Concrete Tectonics: Assembly Typologies for Dry Joints
source	ACADIA21: Realignments: Toward Critical Computation: Proceedings of the 41stAnnual Conference of the Association for Computer Aided Design inArchitecture
last changed	2024/04/17 15:39

_id	caadria2022_357uu
in paper	Bedarf, Patrick, Szabo, Anna, Zanini, Michele, Heusi, Alex and Dillenburger, Benjamin (2022) Robotic 3D Printing of Mineral Foam for a Lightweight Composite Concrete Slab
authors	Bedarf, P., Dutto, A., Zanini, M. & Dillenburger, B.
year	2021
title	Foam 3D printing for construction: A review of applications, materials, and processes
source	Automation in Construction, 130, 103861. https://doi.org/10.1016/j.autcon.2021.103861Bedarf, P., Martinez Schulte, D., Senol, A., Jeoffroy, E., & Dillenburger, B. (2021). Robotic 3D Printing of Mineral Foam for a Lightweight Composite Facade Shading Panel. In 26th International Conference of the Association for Computer-Aided Architectural Design Research in Asia, CAADRIA 2020 (pp. 603–612). The Association for Computer-Aided Architectural Design Research in Asia (CAADRIA)
last changed	2022/06/16 12:18

_id	ecaade2022_360cc2
in paper	Azambuja Varela, Pedro, Lacroix, Igor, Güzelci, Orkan Zeynel and Sousa, José Pedro (2022) Democratizing Stereotomic Construction through AR Technologies - A reusable mold methodology to the production of customized voussoirs using HoloLens
authors	Bhooshan, S., Dell'Endice, A., Du, C., Bouten, S., Van Mele, T. and Block, P.
year	2021
title	Striatus-3D concrete printed masonry bridge
source	Venice, Italy, 2021 [Online]. Available at: https://block.arch.ethz.ch/brg/project/striatus-3d-concrete-printed-masonry-bridge-venice-italy-2021 (Accessed 31 March 2022)
last changed	2022/09/09 10:53

_id	caadria2023_108qq
in paper	Hunt, Erin and Grinham, Jonathan (2023) An Investigation Into Water-Soluble 3D Printed Formwork Informed by Finite Element Analysis Reusable 3D Printed Formwork
authors	Bruce, M., Clune, G., Xie, R., Mozaffari, S., & Arash A.
year	2021
title	Cocoon: 3D Printed Clay Formwork for Concrete Casting
source	Proceedings of the 41st Annual Conference of the Association for Computer Aided Design Architecture, ACADIA 221(pp. 4-49). Association for Computer-Aided Design Architecture (ACADIA)
last changed	2023/06/15 11:35

_id	caadria2023_365r
in paper	Chen, Wei-Ting, Sunny Anthraper, Liya, Skevaki, Eleni, Reiter, Lex and Anton, Ana (2023) Imprinting Concrete Graded Transparency in 3D Concrete Printing Walls
authors	Gebhard, L., Mata-Falcón, J., Anton, A., Dillenburger, B., & Kaufmann, W.
year	2021
title	Structural Behaviour of 3D Printed Concrete Beams with Various Reinforcement Strategies
source	Engineering Structures,24, 11238.Available at: 11238.https://doi.org/1.116/j.engstruct.221.11238
last changed	2023/06/15 11:51

_id	ijac202321301b
in paper	Bedarf, Patrick; Anna Szabo; Enrico Scoccimarro; Benjamin Dillenburger (2023) Foamwork: Challenges and strategies in using mineral foam 3D printing for a lightweight composite concrete slab
authors	Jipa A and Dillenburger B
year	2021
title	3D printed formwork for concrete: state-of-the-art, opportunities, challenges, and applications
source	2nd ed. 3D Print Addit Manuf, 2021, 9, pp. 85–107
last changed	2024/05/29 14:01

_id	caadria2022_435f2
in paper	Stieler, David, Schwinn, Tobias and Menges, Achim (2022) Additive Formwork in Precast Construction - Agent-based Methods for Fabrication-aware Modularization of Concrete Building Elements
authors	Jipa, A. & Dillenburger, B.
year	2021
title	3D Printed Formwork for Concrete: State-of-the-Art, Opportunities, Challenges, and Applications
source	3D Printing and Additive Manufacturing. https://doi.org/10.1089/3dp.2021.0024
last changed	2022/06/16 12:18

_id	caadria2024_253yy
in paper	Xu, Weishun, Jin, Chenxi, Qian, Xidong and Jin, Zihao (2024) Mass-customization of Integrated Green Wall Building Blocks through Clay Printing Formwork
authors	Jipa, A., & Dillenburger, B.
year	2022
title	3D Printed Formwork for Concrete: State-of-the-Art, Opportunities, Challenges, and Applications
source	3D Printing and Additive Manufacturing, 9(2), 84-107. https://doi.org/10.1089/3dp.2021.0024
last changed	2024/06/05 13:45

_id	caadria2024_56d
in paper	Kim, Il Hwan (2024) Density Gradient Concrete Fabrication With Injection 3D Gypsum Printing
authors	Jipa, A., & Dillenburger, B.
year	2022
title	3D Printed Formwork for Concrete: State-of-the-Art, Opportunities, Challenges, and Applications
source	3D Printing and Additive Manufacturing, 9(2), 84-107. https://doi.org/10.1089/3dp.2021.0024
last changed	2024/06/05 13:41

_id	ecaade2024_95jj3
in paper	Andreou, Vasilis; Kontovourkis, Odysseas (2024) Formwork optimization for complex 3D Concrete Printing: A unified theoretical, digital, and experimental framework
authors	Lowke, D. & Vandenberg, A. & Pierre, A. & Thomas, A. & Kloft, H. & Hack, N.
year	2021
title	Injection 3D concrete printing in a carrier liquid - Underlying physics and applications to lightweight space frame structures
source	Cement and Concrete Composites
last changed	2024/08/28 15:05

_id	caadria2024_264gg2
in paper	Kim, Il Hwan (2024) 3D Concrete Printing Frame Structure in Granular Medium
authors	Lowke, D. et al.
year	2021
title	Injection 3D Concrete Printing in a Carrier Liquid - Underlying Physics and Applications to Lightweight Space Frame Structures
source	Cement and Concrete Composites 124: 104169
last changed	2024/06/05 13:45

_id	acadia22_34ll
in paper	Meibodi, Mania Aghaei; McGee, Wes; Bayramvand, Alireza (2022) Robotic 3D Printing Multilayer Building Envelope
authors	M. Aghaei Meibodi, R. Craney, and W. McGee
year	2021
title	Robotic Pellet Extrusion 3D Printing and Integral Computational Design of Reinforced Thin Shell Formwork System for Sandwich Concrete Walls
source	ACADIA 21: Toward Critical Computation; Proceedings of the 41stAnnual Conference of the Association for Computer Aided Design inArchitecture
last changed	2024/04/17 15:35

_id	acadia22_34kk
in paper	Meibodi, Mania Aghaei; McGee, Wes; Bayramvand, Alireza (2022) Robotic 3D Printing Multilayer Building Envelope
authors	Mania Aghaei Meibodi, Pietro Odaglia, and Benjamin Dillenburger
year	2021
title	Min-Max: Reusable 3D printed formwork for thin-shell concrete structures-Reusable 3D printed formwork for thin-shell concrete struc- tures
source	ACADIA 21: Toward Critical Computation; Proceedings of the41st Annual Conference of the Association for Computer Aided Designin Architecture
last changed	2024/04/17 15:35

_id	acadia21_410o2
in paper	Meibodi, Mania Aghaei; Craney, Ryan; McGee, Wes (2021) Robotic Pellet Extrusion: 3D Printing and Integral Computational Design
authors	Mania Aghaei Meibodi, Pietro Odaglia, and Benjamin Dillenburger
year	2021
title	Min-Max: Reusable 3D printed formwork for thin-shell concrete structures; Reusable 3D printed formwork for thin-shell concrete structures
source	Caadria2021; Proceedings of the 26th CAADRIA Conference, vol 1. 743–752
last changed	2024/01/09 11:34

_id	caadria2023_373cc
in paper	*Zhou, Xinjie, Gong, Lei and Yuan, Philip F. (2023) A Large Scale 3D Printing Method for Skeletonized Surfaces Based on Graph Theory**
authors	Placzek, G., Brohmann, L., Mawas, K., Schwerdtner, P., Hack, N., Maboudi, M., & Gerke, M.
year	2021
title	A Lean-based Production Approach for Shotcrete 3D Printed Concrete Components
source	ISARC. Proceedings of the International Symposium on Automation and Robotics in Construction, 38, 811-818, Available at: https://doi.org/1.2226/ISARC221/11.
last changed	2023/06/15 11:51

_id	ecaade2024_95hh3
in paper	Andreou, Vasilis; Kontovourkis, Odysseas (2024) Formwork optimization for complex 3D Concrete Printing: A unified theoretical, digital, and experimental framework
authors	Ruffray, Reiter, and Flatt
year	2021
title	Overcoming environmental stress cracking of FDM 3D printed formwork for counter-pressure casting of concrete
source	3D Printing and Additive Manufacturing 9 (2): 122-131
last changed	2024/08/28 15:05

For more results click below: