Cumincad : CUMINCAD References : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 7867

Reformat results as: short short into frame detailed detailed into frame

Details	Citation	Select
	Schenk, M (2011) Folded Shell Structures , Ph.D. Thesis, University of Cambridge.

	Bedarf, P., Szabo, A., Zanini, M. & Dillenburger, B. (2021) Machine Sensing for Mineral Foam 3D Printing , International Conference on Intelligent Robots and Systems: Workshop Robotic Fabrication, IROS 2021. https://doi.org/10.3929/ethz-b-000506097BubbleDeck. (2021). The Original Voided Slab. Retrieved May 11 2021, from https://www.bubbledeck.comCobiax. (2021). Voided flat plate slab technologies available worldwide. Retrieved May 11 2021, from https://www.cobiax.com/intl/en/Compas. (2020). Retrieved May 11 2021, from https://compas.dev/index.htmlFernández-Jiménez, A., & Palomo, A. (2005). Composition and microstructure of alkali activated fly ash binder: Effect of the activator. Cement and Concrete Research, 35(10), 1984–1992. https://doi.org/10.1016/j.cemconres.2005.03.003Furet, B., Poullain, P., & Garnier, S. (2019). 3D printing for construction based on a complex wall of polymer-foam and concrete. Additive Manufacturing, 28, 58–64. https://doi.org/10.1016/j.addma.2019.04.002Georgopoulos, C., & Minson, A. (2014). Sustainable concrete solutions. Wiley-Blackwell.Halpern, A. B., Billington, D. P., & Adriaenssens, S. (2013). The Ribbed Floor Slab Systems of Pier Luigi Nervi. Proceedings of the International Association for Shell and Spatial Structures (IASS), 7. http://formfindinglab.princeton.edu/wp-content/uploads/2011/09/Nervi_ribbed_floors.pdfHansemann, G., Schmid, R., Holzinger, C., Tapley, J. P., Peters, S., Trummer, A., & Kupelwieser, H. (2021). Lightweight Reinforced Concrete Slab: 130 different 3D printed voids. CPT Worldwide - Construction Printing Technology, 2021(2), 68.Jipa, A., Calvo Barentin, C., Lydon, G., Rippmann, M., Chousou, G., Lomaglio, M., Schlüter, A., Block, P., & Dillenburger, B. (2019). 3D-Printed Formwork for Integrated Funicular Concrete Slabs. Proceedings of the IASS Annual Symposium 2019, 10. https://www.researchgate.net/publication/335175125_3D-Printed_Formwork_for_Integrated_Funicular_Concrete_SlabsJipa, A., & Dillenburger, B. (2021). 3D Printed Formwork for Concrete: State-of-the-Art, Opportunities, Challenges, and Applications. 3D Printing and Additive Manufacturing, 00, 24. https://doi.org/10.1089/3dp.2021.0024Keating, S. J., Leland, J. C., Cai, L., & Oxman, N. (2017). Toward site-specific and self-sufficient robotic fabrication on architectural scales. Science Robotics, 2(5), 1-15. https://doi.org/10.1126/scirobotics.aam8986Liew, A., López, D. L., Van Mele, T., & Block, P. (2017). Design, fabrication and testing of a prototype, thin-vaulted, unreinforced concrete floor. Engineering Structures, 137, 323–335. https://doi.org/10.1016/j.engstruct.2017.01.075Palomo, A., Grutzeck, M. W., & Blanco, M. T. (1999). Alkali-activated fly ashes: A cement for the future. Cement and Concrete Research, 29(8), 1323–1329. https://doi.org/10.1016/S0008-8846(98)00243-9UN Environment Programme. (2020). Global Status Report for Buildings and Construction. Retrieved May 11 2021, from https://globalabc.org/sites/default/files/inline-files/2020%20Buildings%20GSR_FULL%20REPORT.pdfXu, H., & Van Deventer, J. S. J. (2000). The geopolymerisation of alumino-silicate minerals. International Journal of Mineral Processing, 59(3), 247–266. https://doi.org/10.1016/S0301-7516(99)00074-5Zhao, H., Gu, F., Huang, Q.-X., Garcia, J., Chen, Y., Tu, C., Benes, B., Zhang, H., Cohen-Or, D., & Chen, B. (2016). Connected fermat spirals for layered fabrication. ACM Transactions on Graphics, 35(4), 1–10. https://doi.org/10.1145/2897824.2925958

	Bertin, T. B. (2011) Evaluating the Use of Particle-Spring Systems in the Conceptual Design of Grid Shell Structures , Worcester Polytechnic Institute

	Falk, A. and P. von Buelow (2011) Form Exploration of Folded Plate Timber Structures based on Performance Criteria , Taller, Longer, Lighter: Meeting growing demand with limited resources, edited by D. Nethercot and S. Pellegrino. Proceedings of the 35th Annual Symposium of IABSE and the 52nd Annual Symposium of IASS. September 20–23, London, UK

	Falk, Andreas and Buelow, Peter Von (2011) Form Exploration of Folded Plate Timber Structures based on Performance Criteria , Taller, Longer, Lighter: meeting growing demand with limited resources : IABSE-IASS Symposium 2011. London : Hemming Group Ltd.

	Falk, Andreas and Buelow, Peter Von (2011) Form Exploration of Folded Plate Timber Structures based on Performance Criteria , Taller, Longer, Lighter: meeting growing demand with limited resources : IABSE-IASS Symposium 2011. London : Hemming Group Ltd.

	H. Buri, I. Stotz, and Y. Weinand (2011) Curved Folded Plate Timber Structures , 35th Annual Symposium of IABSE / 52nd AnnualSymposium of IASS / 6th International Conference on Space Structures: Taller, Longer, Lighter - Meeting Growing Demand with Limited Resources. London, UK

	Huijben, FAA, van Herwijnen, F and Nijsse, R (2011) Concrete shell structures revisited: introducing a new "Low-Tech" construction method using vacuumatics formwork , E. O?ate, B. Kröplin, & K-U. Bletzinger (Eds.), Structural membranes 2011 : V International Conference on Textile Composites and Inflatable Structures, Barcelona, Spain, pp. 409-420

	Huijben, HF, Van Herwijnen, FVH and Nijsse, RN (2011) Concrete Shell Structures Revisited: Introducing A New 'Low-Tech' Construction Method Using Vacuumatics Formwork , International Conference on Textile Composites and Inflatable Structures. STRUCTURAL MEMBRANES. E. O?ate, B. Kröplin and K.-U.Bletzinger (Eds), pp. 409-420

	Kiendl, J (2011) Isogeometric Analysis and Shape Optimal Design of Shell Structures , Ph.D. Thesis, Chair of Structural Analysis, Technical University Munich

	Lachauer, L., M. Rippmann, and P. Block (2011) Form Finding to Fabrication: A Digital Design Process for Masonry Vaults , Proceedings of the IASS. Shanghai: International Association for Shell and Spatial Structures. http://block.arch.ethz.ch/group/content/publications

	Lienhard, Julian, Schleicher, Simon, and Jan Knippers (2011) Bending-active Structures Research Pavilion ICD / ITKE , Proceedings of the Symposium of the International Association for Shell and Spatial Structures, 2011, London

	Lienhard, Julian, Schleicher, Simon, and Jan Knippers (2011) Bending-active Structures Research Pavilion ICD / ITKE , Proceedings of the Symposium of the International Association for Shell and Spatial Structures, London

	Pena, D.M., Llorens, I., Sastre, R., Crespo, D., & Martinez, J. (2011) Application of Tensegrity to Tensile-texture Constructions: Formfinding and Structural Analysis , Journal of the International Association for Shell and Spatial Structures, 52(2). Available at: https://doi.org/1.126/266-3511.25.1.57

	Ramm E. (2011) Morphogenesis and structural optimization of shell structures with the aid of a genetic algorithm , J Int Assoc Shell Spat Struct; 52: 143–154

	Ramm, E (2011) From "Shell" to "Shell and Spatial" Structures , Mungan, I and Abel, JF (eds), Fifty Years of Progress for Shell and Spatial Structures, Multi-Sciences

	Rippmann, M and Block, P (2011) Digital Stereotomy: Voussoir Geometry For Freeform Masonry-Like Vaults Informed By Structural And fabrication constraints , Proceedings of the International Association for Shell and Spatial Structures (IASS) Symposium

	Shrubshall, C., and A. Fisher. (2011) The Practical Application of Structural Optimisation in the Design of the Louvre Abu Dhabi. , Proceedings of the International Association for Shell and Spatial Structures Symposium, London

	Stavric, M. and Wiltsche, A. (2011) Ornamental Plate Shell Structures , CAAD Futures Conference Proceedings, 817-832

	Stavric, M. and Wiltsche, A. (2011) Ornamental plate shell structures , Proc. 14th CAAD Futures Conference, Liège, 817-832

For more results click below: