Advanced search Recent papers Author index Keyword index Browse by series Help Desk About

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures
PDF papers
References

Hits 101 to 120 of 559

Reformat results as: short   short into frame   detailed   detailed into frame  

# Author Citation Select
101. Zhou, Yifan, Zhang, Liming, Wang, Xiang, Chen, Zhewen and Yuan, Philip F. (2019) Exploration of Computational Design and Robotic Fabrication with Wire-Arc Additive Manufacturing Techniques

M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 1, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 143-152 https://doi.org/10.52842/conf.caadria.2019.1.143
102. Gheorghe, Andrei, Hornung, Philipp, Reiss, Sigurd and Vierlinger, Robert (2018) Architecture Challenge 16 - Robotic Contouring - Researching Robotic Bending of Straight Profile Plastic Beams for Full Scale Production

Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 165-172 https://doi.org/10.52842/conf.ecaade.2018.1.165
103. Kalantar, Negar and Borhani, Alireza (2018) Informing Deformable Formworks - Parameterizing Deformation Behavior of a Non-Stretchable Membrane via Kerfing

T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 339-348 https://doi.org/10.52842/conf.caadria.2018.2.339
104. Kontovourkis, Odysseas and Konatzii, Panagiota (2018) Design-static analysis and environmental assessment investigation based on a kinetic formwork-driven by digital fabrication principles

Odysseas Kontovourkis (ed.), Sustainable Computational Workflows [6th eCAADe Regional International Workshop Proceedings / ISBN 9789491207143], Department of Architecture, University of Cyprus, Nicosia, Cyprus, 24-25 May 2018, pp. 131-140 https://papers.cumincad.org/cgi-bin/works/Show?ecaaderis2018_112
105. Tan, Ying Yi and Lee, Tat Lin (2018) The Flexible Textile Mesh - Manufacture of Curved Perforated Cladding Panels

T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 349-358 https://doi.org/10.52842/conf.caadria.2018.2.349
106. Wit, Andrew John (2018) Cloudmagnet, A CFRP Framework for Flexible Architectures

T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 49-58 https://doi.org/10.52842/conf.caadria.2018.1.049
107. Austern, Guy, Capeluto, Isaac Guedi and Grobman, Yasha Jacob (2018) Rationalization and Optimization of Concrete Façade Panels

Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 727-734 https://doi.org/10.52842/conf.ecaade.2018.1.727
108. Austern, Guy; Capeluto, Isaac Guedi; Grobman, Yasha Jacob (2018) Fabrication-Aware Design of Concrete Façade Panels. A Computational Method For Evaluating the Fabrication of Large- Scale Molds in Complex Geometries

ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 136-145 https://doi.org/10.52842/conf.acadia.2018.136
109. Clifford, Brandon; McGee, Wes (2018) Cyclopean Cannibalism. A method for recycling rubble

ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 404-413 https://doi.org/10.52842/conf.acadia.2018.404
110. Cupkova, Dana, Byrne, Daragh and Cascaval, Dan (2018) Sentient Concrete - Developing Embedded Thermal and Thermochromic Interactions for Architecture and Built Environment

T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 545-554 https://doi.org/10.52842/conf.caadria.2018.2.545
111. Côco Júnior, Verley Henry; Celani, Gabriela (2018) From the automated generation of layouts to fabrication with the use of BIM: a new agenda for Architecture in the 21st century

SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 23-30 https://papers.cumincad.org/cgi-bin/works/Show?sigradi2018_1302
112. Foged, Isak Worre and Jensen, Mads Brath (2018) Thermal Compositions Through Robot Based Thermal Mass Distribution

Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 783-790 https://doi.org/10.52842/conf.ecaade.2018.1.783
113. Gascon Alvarez, Eduardo; Curth, Alexander (Sandy); Feickert, Kiley; Martinez Schulte, Dinorah; Mueller, Caitlin; Ismail, Mohamed (2023) Algorithmic Design for Low-Carbon, Low-Cost Housing Construction in Mexico

ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 1: Projects Catalog of the 43rd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 34-38. https://papers.cumincad.org/cgi-bin/works/Show?acadia23_v1_34
114. Imanishi, Naoki, Ogihara, Hisayuki, Mohammed Aqil, Cheddadi, Hotta, Kensuke and Ikeda, Yasushi (2018) Adaptable Design-Construction Method for Remote-Location - Experiment with Reverse-Engineering System to Expand the Possibilities of Natural Materials with Bamboo Concrete Shell as a Case Study

T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 327-336 https://doi.org/10.52842/conf.caadria.2018.1.327
115. Mekawy, Mohammed and Petzold, Frank (2018) BIM-Based Model Checking in the Early Design Phases of Precast Concrete Structures

T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 71-80 https://doi.org/10.52842/conf.caadria.2018.2.071
116. Naboni, Roberto; Breseghello, Luca (2018) Fused Deposition Modelling Formworks for Complex Concrete Constructions

SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 700-707 https://papers.cumincad.org/cgi-bin/works/Show?sigradi2018_1648
117. Natividade, Veronica (2018) Digital Design and Fabrication of Freeform Concrete Blocks - The experience of 'Cobogo Trança'

Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 743-752 https://doi.org/10.52842/conf.ecaade.2018.1.743
118. Ostrowska-Wawryniuk, Karolina and Nazar, Krzysztof (2018) Generative BIM Automation Strategies for Prefabricated Multi-Family Housing Design

Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 247-256 https://doi.org/10.52842/conf.ecaade.2018.1.247
119. Ribeiro do Rozário, Camilla; da Silva Tavares, Felipe (2018) Parametric design of shells in reinforced concrete: a case study of the Los Manantiales

SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 183-190 https://papers.cumincad.org/cgi-bin/works/Show?sigradi2018_1529
120. Scotto, Fabio, Lloret Fritschi, Ena, Gramazio, Fabio, Kohler, Matthias and Flatt, Robert J. (2018) Adaptive Control System for Smart Dynamic Casting - Defining Fabrication-Informed Design Tools and Process Parameters in Digital Fabrication Processes

T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 255-264 https://doi.org/10.52842/conf.caadria.2018.1.255

For more results click below:

show page 0show page 1show page 2show page 3show page 4this is page 5show page 6show page 7show page 8show page 9show page 10... show page 27HOMELOGIN (you are user _anon_843825 from group guest) CUMINCAD Papers Powered by SciX Open Publishing Services 1.002