Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 101 to 120 of 17465

Reformat results as: short short into frame detailed detailed into frame

101.

Loffreda, Gianluigi; Fioravanti, Antonio and Avantaggiato, Luigi (2013)

[Architectural] Reasoning over BIM/CAD Database

Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 495-503 https://doi.org/10.52842/conf.ecaade.2013.2.495

102.

Logan, B. and Smithers, T. (1993)

Creativity and design as exploration

J.S. Gero and M. L. Maher (eds), Modelling Creativity and Knowledge-Based Creative Design, Lawrence Erlbaum Associates, pp. 139-175 https://papers.cumincad.org/cgi-bin/works/Show?c9cf

103.

Logan, Brian S. (1986)

Representing the Structure of Design Problems

Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 158-170 https://papers.cumincad.org/cgi-bin/works/Show?c361

104.

Logara, Irena (2004)

Finding of Form

ETH postgraduate studies final thesis, Zurich https://papers.cumincad.org/cgi-bin/works/Show?050112_logara-i

105.

Logere, Romaine; Mathias Hank Haeusler (2009)

Transdiciplinary Research Strategies: Investigating the Transition of Peer2Peer Relational Systems from Digital to Real-time Environments

SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009 https://papers.cumincad.org/cgi-bin/works/Show?sigradi2009_745

106.

Logie, Robert H. (2001)

Working Memory: A Mental Space for Design and Discovery

J. S. Gero, B. Tversky and T. Purcell (eds), 2001, Visual and Spatial Reasoning in Design, II - Key Centre of Design Computing and Cognition, University of Sydney, Australia https://papers.cumincad.org/cgi-bin/works/Show?6eda

107.

Loh, E.; N. Dawood and J. Dean (2007)

Integration of 3D Tool with Environmental Impact Assessment (3D EIA)

Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 51-66 https://papers.cumincad.org/cgi-bin/works/Show?ascaad2007_005

108.

Loh, Paul and Jahn, Gwyllim (2024)

Learning Through Making Using Augmented Reality: A Case Study in Accelerated Learning

Nicole Gardner, Christiane M. Herr, Likai Wang, Hirano Toshiki, Sumbul Ahmad Khan (eds.), ACCELERATED DESIGN - Proceedings of the 29th CAADRIA Conference, Singapore, 20-26 April 2024, Volume 3, pp. 99–108 https://doi.org/10.52842/conf.caadria.2024.3.099

109.

Loh, Paul and Leggett, David (2017)

Tools as Agents in Design and Making Processes

P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 799-808 https://doi.org/10.52842/conf.caadria.2017.799

110.

Loh, Paul, Leggett, David and Prohasky, Daniel (2018)

CNC Adjustable Mould to Eliminate Waste in Concrete Casting

Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 735-742 https://doi.org/10.52842/conf.ecaade.2018.1.735

111.

Loh, Paul, Leggett, David and Prohasky, Daniel (2019)

Robotic Fabrication of Doubly Curved FaÃ§ade System - Constructing intelligence in the digital fabrication workflow

M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 2, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 521-530 https://doi.org/10.52842/conf.caadria.2019.2.521

112.

Loh, Paul, Underwood, Jenny and Leggett, David (2023)

3D Knitted Fabric Formwork for Concrete Casting

Immanuel Koh, Dagmar Reinhardt, Mohammed Makki, Mona Khakhar, Nic Bao (eds.), HUMAN-CENTRIC - Proceedings of the 28th CAADRIA Conference, Ahmedabad, 18-24 March 2023, pp. 119–128 https://doi.org/10.52842/conf.caadria.2023.2.119

113.

Loh, Paul (2015 )

Articulated Timber Ground, Making Pavilion as Pedagogy

Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 23-32 https://doi.org/10.52842/conf.caadria.2015.023

114.

Loh, Paul; David Leggett and Timothy Cameron (2016)

Smart assembly in digital fabrication: designing workflow

Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 755-764 https://doi.org/10.52842/conf.caadria.2016.755

115.

Loh, Paul; Jane. Burry and Malte Wagenfeld (2016)

Workmanship of Risk: continuous designing in digital fabrication

Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 651-660 https://doi.org/10.52842/conf.caadria.2016.651

116.

Loh, Rong (1981)

Convex B-Spline Surfaces

Computer Aided Design. IPC Business Press, May, 1981. vol. 13: pp. 145-149 : some ill. ; graphs. includes a short bibliography https://papers.cumincad.org/cgi-bin/works/Show?a71d

117.

Loho, Roger, Stein, Max, Carl, Timo and Schein, Markus (2023)

From Sheet to 3D Form

Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, pp. 95–104 https://doi.org/10.52842/conf.ecaade.2023.2.095

118.

Lohse, Theresa and Werner, Liss C. (2019)

Semi-flexible Additive Manufacturing Materials for Modularization Purposes - A modular assembly proposal for a foam edge-based spatial framework

Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 463-470 https://doi.org/10.52842/conf.ecaade.2019.1.463

119.

Lohse, Theresa, Fujii, Ryuta and Werner, Liss C. (2018)

Multi-Dimensional Interface Based Spatial Adaption - A Prototype For A Multi-Sensory User Interface Employing Elastic Materials

Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 169-176 https://doi.org/10.52842/conf.ecaade.2018.2.169

120.

Lok, Leslie and Bae, Jiyoon (2022)

Timber De-Standardized 2.0 : Mixed Reality Visualizations and User Interface for Processing Irregular Timber

Jeroen van Ameijde, Nicole Gardner, Kyung Hoon Hyun, Dan Luo, Urvi Sheth (eds.), POST-CARBON - Proceedings of the 27th CAADRIA Conference, Sydney, 9-15 April 2022, pp. 121-130 https://doi.org/10.52842/conf.caadria.2022.2.121

For more results click below: