CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 21 to 40 of 585

# Author Citation Select
21. Chiarella, Mauro, Gronda, Luciana and Veizaga, Martín (2019) RILAB - architectural envelopes - From spatial representation (generative algorithm) to geometric physical optimization (scientific modeling)

Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 17-24 https://doi.org/10.52842/conf.ecaade.2019.3.017
22. Chun, Junho, Lee, Juhun and Park, Daekwon (2018) TOPO-JOINT - Topology Optimization Framework for 3D-Printed Building Joints

T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 205-214 https://doi.org/10.52842/conf.caadria.2018.1.205
23. Claire Im, Hyeonji; AlOthman, Sulaiman; García del Castillo, Jose Luis (2018) Responsive Spatial Print. Clay 3D printing of spatial lattices using real-time model recalibration

ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 286-293 https://doi.org/10.52842/conf.acadia.2018.286
24. Claro, Ana Julia; Chiappini, Enrique Luis (2018) Structural skins over unstable soils

SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 130-135 https://papers.cumincad.org/cgi-bin/works/Show?sigradi2018_1764
25. Câmara Benevides, Caroline; Ribeiro Roquete, Suellen; Mourão Moura, Ana Clara; Romero Fonseca Motta, Silvio (2018) Comparative Analysis of Geospatial Visualization Tools for Urban Zoning Planning

SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 609-616 https://papers.cumincad.org/cgi-bin/works/Show?sigradi2018_1702
26. Dezen-Kempter, Eloisa, Cogima, Camila Kimi, Vieira de Paiva, Pedro Victor and Garcia de Carvalho, Marco Antonio (2018) BIM for Heritage Documentation - An ontology-based approach

Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 213-222 https://doi.org/10.52842/conf.ecaade.2018.1.213
27. Foged, Isak Worre and Jensen, Mads Brath (2018) Thermal Compositions Through Robot Based Thermal Mass Distribution

Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 783-790 https://doi.org/10.52842/conf.ecaade.2018.1.783
28. Gargaro, Silvia, Cigola, Michela, Gallozzi, Arturo and Fioravanti, Antonio (2018) Cultural Heritage Knowledge Context - A model based on Collaborative Cultural approach

Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 205-214 https://doi.org/10.52842/conf.ecaade.2018.2.205
29. Gürsoy, Benay (2018) From Control to Uncertainty in 3D Printing with Clay

Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 21-30 https://doi.org/10.52842/conf.ecaade.2018.2.021
30. Kimi Cogima, Camila; V. V. de Paiva, Pedro; Dezen-Kempter, Eloisa; G. De Carvalho, Marco Antonio (2018) Digital scanning and BIM modeling for modern architecture preservation: the Oscar Niemeyer’s Church of Saint Francis of Assisi

SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 457-462 https://papers.cumincad.org/cgi-bin/works/Show?sigradi2018_1473
31. Marques, Emílio, Monteiro, Verner and Goulart, Solange (2024) Internalization of Prescriptive Parameters from a Brazilian Energy Performance Standard into BIM Model for Facade Opening Layout

Herrera, Pablo C., Gómez, Paula, Estevez, Alberto T., Torreblanca-Díaz, David A. Biodigital Intelligent Systems - Proceedings of the XXVIII Conference of the Iberoamerican Society of Digital Graphics (SIGraDi 2024) - ISBN 978-9915-9635-2-5, iBAG-UIC Barcelona, Spain, 13-15 November 2024, pp. 1825–1836 https://papers.cumincad.org/cgi-bin/works/Show?sigradi2024_236
32. Mekawy, Mohammed and Petzold, Frank (2018) BIM-Based Model Checking in the Early Design Phases of Precast Concrete Structures

T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 71-80 https://doi.org/10.52842/conf.caadria.2018.2.071
33. Miao, Yufan; Reinhard Koenig, Katja Knecht, Kateryna Konieva, Peter Buš and Mei-Chih Chang (2018) Computational urban design prototyping: Interactive planning synthesis methods—a case study in Cape Town

International Journal of Architectural Computing vol. 16 - no. 3, 212-226 https://papers.cumincad.org/cgi-bin/works/Show?ijac201816304
34. Modzelewska, Agnieszka (2018) A Smooth Introduction to BIM in Interior Design Studies - The reversed 'in steps' design procedure.

Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 289-294 https://doi.org/10.52842/conf.ecaade.2018.1.289
35. Nagy, Danil; Stoddart, Jim; Villaggi, Lorenzo; Burger, Shane; Benjamin, David (2018) Digital Dérive. Reconstructing urban environments based on human experience

ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 72-81 https://doi.org/10.52842/conf.acadia.2018.072
36. Ostrowska-Wawryniuk, Karolina and Nazar, Krzysztof (2018) Generative BIM Automation Strategies for Prefabricated Multi-Family Housing Design

Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 247-256 https://doi.org/10.52842/conf.ecaade.2018.1.247
37. Poustinch, Ebrahimi (2018) Subtractive digital fabrication with actual robot and virtual material using a MARI platform

International Journal of Architectural Computing vol. 16 - no. 4, 281-294 https://papers.cumincad.org/cgi-bin/works/Show?ijac201816405
38. Ren, Hui, Han, Yunsong and Sun, Cheng (2018) transDATA: A Data Recording and Exchanging Plug-in for Architectural Computational Design

T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 51-60 https://doi.org/10.52842/conf.caadria.2018.2.051
39. Schneider, Sven, Kuliga, Saskia, Weiser, René, Kammler, Olaf and Fuchkina, Ekaterina (2018) VREVAL - A BIM-based Framework for User-centered Evaluation of Complex Buildings in Virtual Environments

Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 833-842 https://doi.org/10.52842/conf.ecaade.2018.2.833
40. Seibold, Zach; Hinz, Kevin; García del Castillo y López, Jose Luis; Martínez Alonso, Nono; Mhatre, Saurabh; Bechthold, Martin (2018) Ceramic Morphologies. Precision and control in paste-based additive manufacturing

ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 350-357 https://doi.org/10.52842/conf.acadia.2018.350

For more results click below:

show page 0this is page 1show page 2show page 3show page 4show page 5show page 6... show page 29HOMELOGIN (you are user _anon_264031 from group guest) CUMINCAD Papers Powered by SciX Open Publishing Services 1.002