Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 21 to 40 of 2762

Reformat results as: short short into frame detailed detailed into frame

21.

Feringa, Jelle; Sondergaard, Asbjorn (2012)

Design and Fabrication of Topologically Optimized Structures; An Integral Approach - A Close Coupling Form Generation and Fabrication

Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 495-500 https://doi.org/10.52842/conf.ecaade.2012.2.495

22.

García, Alvarado Rodrigo; Turkienicz Benamy (2010)

Generative House: Exploration of Digital Fabrication and Generative System for Low - cost Housing in Southern Brazil

SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 384-387 https://papers.cumincad.org/cgi-bin/works/Show?sigradi2010_384

23.

Geiger, Jordan; San Fratello, Virginia (2010)

Hyperculture: Earth as Interface

ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 379-384 https://doi.org/10.52842/conf.acadia.2010.379

24.

Guzik, Agata (2010)

Digital Fabrication Inspired Design: Influence of fabrication parameters on a design process

FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.227-235 https://doi.org/10.52842/conf.ecaade.2010.227

25.

Hemsath, Timothy L. (2010)

Searching for Innovation Through Teaching Digital Fabrication

FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.21-30 https://doi.org/10.52842/conf.ecaade.2010.021

26.

Herrera, Pablo C. (2010)

Tecnologías disruptivas: programación y fabricación en Latinoamérica [Disruptive technologies: programming and digital fabrication in Latin America]

SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 213-216 https://papers.cumincad.org/cgi-bin/works/Show?sigradi2010_213

27.

Hunold, Lara Arthur; Gorge Canella Eduardo; Giacaglia Marcelo Eduardo; Corrêa Norberto; Moura da Silva (2010)

Brinquedos, modelos: uma atividade lúdica se transforma em curricular com apoio das novas tecnologias de fabricação digital [Toys, models: a fun activity becomes curriculum, supported by new digital fabrication technologies]

SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 73-76 https://papers.cumincad.org/cgi-bin/works/Show?sigradi2010_73

28.

Ireland, Tim (2010)

Stigmergic Planning

ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 183-189 https://doi.org/10.52842/conf.acadia.2010.183

29.

Jaskiewicz, Tomasz (2010)

(In:)forming Interactive Architectural Systems, Case of the xMAiA Meta-model

ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 203-210 https://doi.org/10.52842/conf.acadia.2010.203

30.

Jones, Charles; Kevin Sweet (2010)

Over Constrained

CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 179-188 https://papers.cumincad.org/cgi-bin/works/Show?ascaad2010_179

31.

Kaufmann, Stefan; Schubert Gerhard; Petzold Frank (2010)

Escaping the Model’s Scale

SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 30-34 https://papers.cumincad.org/cgi-bin/works/Show?sigradi2010_30

32.

Kenzari, Bechir (2010)

Fabricating twisted towers

Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 239-247 https://doi.org/10.52842/conf.caadria.2010.239

33.

Kenzari, Bechir (2010)

Generative Design and the Reduction of Presence

CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 97-106 https://papers.cumincad.org/cgi-bin/works/Show?ascaad2010_097

34.

Klinger, Kevin R. (2010)

Connect Globally | Make Locally: Cases in Design - Through - Production Collaboration Between the Academy and Industry

SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 26-29 https://papers.cumincad.org/cgi-bin/works/Show?sigradi2010_26

35.

Ko, Kaon and Salvator-John Liotta (2011)

Digital tea house: Japanese tea ceremony as a pretext for exploring parametric design and digital fabrication in architectural education

Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 71-80 https://doi.org/10.52842/conf.caadria.2011.071

36.

Liu, Chenjun (2020)

Double Loops Parametric Design of Surface Steel Structure Based on Performance and Fabrication

D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 1, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 23-33 https://doi.org/10.52842/conf.caadria.2020.1.023

37.

Lostritto, Carl (2010)

Computation Without Computers

CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 135-144 https://papers.cumincad.org/cgi-bin/works/Show?ascaad2010_135

38.

MacDowell, Parke; Tomova, Diana (2011)

Robotic Rod-bending: Digital Drawing in Physical Space

ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 132-137 https://doi.org/10.52842/conf.acadia.2011.132

39.

Marble, Scott (2010)

Designing Design, Designing Assembly, Designing Industry

ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 286-292 https://doi.org/10.52842/conf.acadia.2010.286

40.

Menges, Achim (2010)

Material Information: Integrating Material Characteristics and Behavior in Computational Design for Performative Wood Construction

ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 151-158 https://doi.org/10.52842/conf.acadia.2010.151

For more results click below: