Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 41 to 60 of 623

Reformat results as: short short into frame detailed detailed into frame

41.

Liu, Jie, Ma, Hongtao, Tang, Ning, Xu, Weiguo and Luo, Dan (2018)

Kinetair: Interactive Stairs with Multiple Functions

T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 369-378 https://doi.org/10.52842/conf.caadria.2018.2.369

42.

Luo, Jiaxiang, Mastrokalou, Efthymia, Aldabous, Rahaf, Aldaboos, Sarah and Lopez Rodriguez, Alvaro (2023)

Fabrication of Complex Clay Structures Through an Augmented Reality Assisted Platform

Immanuel Koh, Dagmar Reinhardt, Mohammed Makki, Mona Khakhar, Nic Bao (eds.), HUMAN-CENTRIC - Proceedings of the 28th CAADRIA Conference, Ahmedabad, 18-24 March 2023, pp. 413–422 https://doi.org/10.52842/conf.caadria.2023.1.413

43.

Ortner, F. Peter and Tay, Jing Zhi (2022)

Optimizing Design Circularity: Managing Complexity in Design for Circular Economy Through Single and Multi-Objective Optimisation

Jeroen van Ameijde, Nicole Gardner, Kyung Hoon Hyun, Dan Luo, Urvi Sheth (eds.), POST-CARBON - Proceedings of the 27th CAADRIA Conference, Sydney, 9-15 April 2022, pp. 191-200 https://doi.org/10.52842/conf.caadria.2022.1.191

44.

Spiegelhalter, Thomas (2024)

Integrating AI-SynBio-Digital Twin Futures in Coastal Urban Resilience

Herrera, Pablo C., Gómez, Paula, Estevez, Alberto T., Torreblanca-Díaz, David A. Biodigital Intelligent Systems - Proceedings of the XXVIII Conference of the Iberoamerican Society of Digital Graphics (SIGraDi 2024) - ISBN 978-9915-9635-2-5, iBAG-UIC Barcelona, Spain, 13-15 November 2024, pp. 2361–2372 https://papers.cumincad.org/cgi-bin/works/Show?sigradi2024_104

45.

Stefas, Alexander, Rossi, Andrea and Tessmann, Oliver (2018)

Funken - Serial Protocol Toolkit for Interactive Prototyping

Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 177-186 https://doi.org/10.52842/conf.ecaade.2018.2.177

46.

T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.) (2018)

CAADRIA 2018: Learning, Prototyping and Adapting, Volume 2

Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, 610 p. https://doi.org/10.52842/conf.caadria.2018.2

47.

T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.) (2018)

CAADRIA 2018: Learning, Prototyping and Adapting, Volume 1

Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, 578 p. https://doi.org/10.52842/conf.caadria.2018.1

48.

Amtsberg, Felix and Raspall, Felix (2018)

Bamboo?

T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 245-254 https://doi.org/10.52842/conf.caadria.2018.1.245

49.

Araullo, Rebekah (2018)

3D Growth Morphology - Tectonics of Custom Shapes in Reciprocal Systems

T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 307-316 https://doi.org/10.52842/conf.caadria.2018.1.307

50.

Chia, Hsu Yi; Hsien, Hsu Pei (2018)

The fabrication and application of parametric inflatable structure

SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 684-689 https://papers.cumincad.org/cgi-bin/works/Show?sigradi2018_1609

51.

Cichocka, Judyta Maria, Loj, Szymon and Wloczyk, Marta Magdalena (2021)

A Method for Generating Regular Grid Configurations on Free-From Surfaces for Structurally Sound Geodesic Gridshells

Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 2, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 493-502 https://doi.org/10.52842/conf.ecaade.2021.2.493

52.

Claro, Ana Julia; Chiappini, Enrique Luis (2018)

Structural skins over unstable soils

SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 130-135 https://papers.cumincad.org/cgi-bin/works/Show?sigradi2018_1764

53.

Danesh Zand, Foroozan; Baghi, Ali; Kalantari, Saleh (2018)

Digitally Fabricating Expandable Steel Structures Using Kirigami Patterns

SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 724-731 https://papers.cumincad.org/cgi-bin/works/Show?sigradi2018_1879

54.

Danesh, Foroozan, Baghi, Ali and Kalantari, Saleh (2018)

Programmable Paper Cutting - A Method to Digitally Fabricate Transformable, Complex Structural Geometry

Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 489-498 https://doi.org/10.52842/conf.ecaade.2018.2.489

55.

de Oliveira, Maria Jo?o, Moreira Rato, Vasco and Leit?o, Carla (2018)

KINE[SIS]TEM'17 - A methodological process for a Nature-Based Design

Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 561-570 https://doi.org/10.52842/conf.ecaade.2018.1.561

56.

Eric Peterson, Bhavleen Kaur (2023)

Printing Compound-Curved Sandwich Structures with Robotic Multi-Bias Additive Manufacturing

Proceedings of the 2023 DigitalFUTURES The 5st International Conference on Computational Design and Robotic Fabrication (CDRF 2023) https://doi.org/https://doi.org/10.1007/978-981-99-8405-3_44

57.

Fernández González, Alberto; Ortega Gómez, Susana (2018)

Coastal Fog Tower – Design and Fabrication Process of a Vertical Fog Capture Device

SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 732-736 https://papers.cumincad.org/cgi-bin/works/Show?sigradi2018_1881

58.

Gengnagel, Christoph; Riccardo La Magna, Mette Ramsgaard Thomsen and Martin Tamke (2018)

Shaping hybrids – Form finding of new material systems

International Journal of Architectural Computing vol. 16 - no. 2, 91-103 https://papers.cumincad.org/cgi-bin/works/Show?ijac201816204

59.

Godoi da Cruz, Renato; Arcipreste, Cláudia Maria; Lemieszek Pinheiro, Rafael; de Jesus Ribas, Rovadávia Aline (2018)

Generative design in the design development of metallic constructions

SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 211-218 https://papers.cumincad.org/cgi-bin/works/Show?sigradi2018_1631

60.

Hünkar, Ertunç and Figueiredo, Bruno Acácio Ferreira (2018)

3D Printing of High Strength and Multi-Scaled Fragmented Structures

Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 173-178 https://doi.org/10.52842/conf.ecaade.2018.1.173

For more results click below: