Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 61 to 80 of 501

Reformat results as: short short into frame detailed detailed into frame

61.

Thariyan, Elizabeth; Beorkrem, Christopher; Ellinger, Jefferson (2017)

Buildable Performance Envelopes: Optimizing Sustainable Design in a Pre-Design Phase

ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 610- 619 https://doi.org/10.52842/conf.acadia.2017.610

62.

Varsami, Constantina; Tsamis, Alexandros; Logan, Timothy (2022)

Gaming Engine as a Tool for Designing Smart, Interactive, Light-Sculpting Systems

Herrera, PC, Dreifuss-Serrano, C, Gómez, P, Arris-Calderon, LF, Critical Appropriations - Proceedings of the XXVI Conference of the Iberoamerican Society of Digital Graphics (SIGraDi 2022), Universidad Peruana de Ciencias Aplicadas, Lima, 7-11 November 2022 , pp. 617–628 https://papers.cumincad.org/cgi-bin/works/Show?sigradi2022_51

63.

Vasanthakumar, Saeran; Saha, Nirvik; Haymaker, John; Shelden, Dennis (2017)

Bibil: A Performance-Based Framework to Determine Built Form Guidelines

ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 630- 639 https://doi.org/10.52842/conf.acadia.2017.630

64.

Wortmann, Thomas (2017)

Opossum - Introducing and Evaluating a Model-based Optimization Tool for Grasshopper

P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 283-292 https://doi.org/10.52842/conf.caadria.2017.283

65.

Yousif, Shermeen; Yan, Dr. Wei; Culp, Dr. Charles (2017)

Incorporating Form Diversity into Architectural Design Optimization

ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 640- 649 https://doi.org/10.52842/conf.acadia.2017.640

66.

Zhang, Cheng and Ong, Lijing (2017)

Optimization of Window-Wall-Ratio using BIM-based Energy Simulation

P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 397-405 https://doi.org/10.52842/conf.caadria.2017.397

67.

Dickey, Rachel (2017)

Soft Systems - Rethinking Indeterminacy in Architecture as Opportunity Driven Research

P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 811-820 https://doi.org/10.52842/conf.caadria.2017.811

68.

Dickey, Rachel (2017)

Soft Computing in Design: Developing Automation Strategies from Material Indeterminacies

Gülen Çagdas, Mine Özkar, Leman F. Gül and Ethem Gürer (Eds.) Future Trajectories of Computation in Design [17th International Conference, CAAD Futures 2017, Proceedings / ISBN 978-975-561-482-3] Istanbul, Turkey, July 12-14, 2017, pp. 419-430. https://papers.cumincad.org/cgi-bin/works/Show?cf2017_419

69.

Dritsas, Stylianos, Chen, Lujie and Sass, Lawrence (2017)

Small 3D Printers / Large Scale Artifacts - Computation for Automated Spatial Lattice Design-to-Fabrication with Low Cost Linear Elements and 3D Printed Nodes

P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 821-830 https://doi.org/10.52842/conf.caadria.2017.821

70.

Felbrich, Benjamin; Fru?h, Nikolas; Prado, Marshall; Saffarian, Saman; Solly, James; Vasey, Lauren; Knippers, Jan; Menges, Achim (2017)

Multi-Machine Fabrication: An Integrative Design Process Utilising an Autonomous UAV and Industrial Robots for the Fabrication of Long-Span Composite Structures

ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 248-259 https://doi.org/10.52842/conf.acadia.2017.248

71.

Fernando, Shayani, Reinhardt, Dagmar and Weir, Simon (2017)

Waterjet and Wire-cutting Workflows in Stereotomic Practice - Material Cutting of Wave Jointed Blocks

P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 787-797 https://doi.org/10.52842/conf.caadria.2017.787

72.

Haeusler, M. Hank, Asher, Rob and Booth, Lucy (2017)

Urban Pinboard - Development of a platform to access open source data to optimise urban planning performance

Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 439-448 https://doi.org/10.52842/conf.ecaade.2017.1.439

73.

Hitchings, Katie, Patel, Yusef and McPherson, Peter (2017)

Analogue Automation - The Gateway Pavilion for Headland Sculpture on the Gulf

Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 347-354 https://doi.org/10.52842/conf.ecaade.2017.2.347

74.

Hua, Hao and Jia, Tingli (2017)

Fabricating Without CAD Models - Experiments with G-code and KUKA KRL

P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 883-892 https://doi.org/10.52842/conf.caadria.2017.883

75.

Juliani Pereira, Vinícius; Juliana Harrison Henno (2017)

O Pensamento Algorítmico Associado ao Origami no Contexto de um Laboratório de Fabricação Digital [The algorithmic thinking associated with Origami at a digital fabrication laboratory context]

SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.231-236 https://papers.cumincad.org/cgi-bin/works/Show?sigradi2017_033

76.

Luo, Jiaxiang, Mastrokalou, Efthymia, Aldabous, Rahaf, Aldaboos, Sarah and Lopez Rodriguez, Alvaro (2023)

Fabrication of Complex Clay Structures Through an Augmented Reality Assisted Platform

Immanuel Koh, Dagmar Reinhardt, Mohammed Makki, Mona Khakhar, Nic Bao (eds.), HUMAN-CENTRIC - Proceedings of the 28th CAADRIA Conference, Ahmedabad, 18-24 March 2023, pp. 413–422 https://doi.org/10.52842/conf.caadria.2023.1.413

77.

Markusiewicz, Jacek and Krê¿lik, Adrian (2017)

Human-driven and machine-driven decisions in urban design and architecture - A comparison of two different methods in finding solutions to a complex problem

Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 505-514 https://doi.org/10.52842/conf.ecaade.2017.1.505

78.

Miranda, Pablo (2017)

Computer utterances: Sequence and event in digital architecture

International Journal of Architectural Computing vol. 15 - no. 4, 268-284 https://papers.cumincad.org/cgi-bin/works/Show?ijac201715404

79.

Muehlbauer, Manuel; Song, Andy; Burry, Jane (2017)

Towards Intelligent Control in Generative Design

Gülen Çagdas, Mine Özkar, Leman F. Gül and Ethem Gürer (Eds.) Future Trajectories of Computation in Design [17th International Conference, CAAD Futures 2017, Proceedings / ISBN 978-975-561-482-3] Istanbul, Turkey, July 12-14, 2017, pp. 630-647. https://papers.cumincad.org/cgi-bin/works/Show?cf2017_630

80.

Page, Mitchell (2017)

A Robotic Fabrication Methodology for Dovetail and Finger Jointing: An Accessible & Bespoke Digital Fabrication Process for Robotically-Milled Dovetail & Finger Joints

ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 456- 463 https://doi.org/10.52842/conf.acadia.2017.456

For more results click below: