Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 61 to 80 of 613

Reformat results as: short short into frame detailed detailed into frame

61.

Kang, Donghwi Chris; Hoban, Nicholas; Yablonina, Maria (2021)

Discrete Quasicrystal Assembly

ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by B. Bogosian, K. Dörfler, B. Farahi, J. Garcia del Castillo y López, J. Grant, V. Noel, S. Parascho, and J. Scott. 372-379. https://doi.org/10.52842/conf.acadia.2021.372

62.

Kim, Taeyong, Guida, George and Kim, Dongyun (2021)

VitruviAR: Interactive Augmented Reality for Early Design Stage Applications

Gomez, P and Braida, F (eds.), Designing Possibilities - Proceedings of the XXV International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2021), Online, 8 - 12 November 2021, pp. 1101–1112 https://papers.cumincad.org/cgi-bin/works/Show?sigradi2021_83

63.

Koleva, Denitsa; Özdemir, Eda; Tsiokou, Vaia; Dierichs, Karola (2021)

Designing Matter

ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by B. Bogosian, K. Dörfler, B. Farahi, J. Garcia del Castillo y López, J. Grant, V. Noel, S. Parascho, and J. Scott. 280-291. https://doi.org/10.52842/conf.acadia.2021.280

64.

Krê¿lik, Adrian, Güzelci, Orkan Zeynel and Sousa, José Pedro (2021)

Rob-LCA - An assessment method to support environmental sensitive material selection in robotic fabrication

Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 1, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 455-464 https://doi.org/10.52842/conf.ecaade.2021.1.455

65.

Li, Chao and Petzold, Frank (2021)

Integrating digital design and Additive Manufacturing through BIM-based digital support - A decision support system using Semantic Web and Multi-Criteria Decision Making

A. Globa, J. van Ameijde, A. Fingrut, N. Kim, T.T.S. Lo (eds.), PROJECTIONS - Proceedings of the 26th CAADRIA Conference - Volume 1, The Chinese University of Hong Kong and Online, Hong Kong, 29 March - 1 April 2021, pp. 263-270 https://doi.org/10.52842/conf.caadria.2021.1.263

66.

Liu, Jingyang; Yi-Chin Lee, and Daniel Cardoso Llach (2021)

Computational design and fabrication of highly customizable architectural space frames: Making a flat-cut Weaire-Phelan structure

International Journal of Architectural Computing 2021, Vol. 19 - no. 1, 37–49 https://papers.cumincad.org/cgi-bin/works/Show?ijac202119103

67.

Liu, Yulun; Lu, Yao; Akbarzadeh, Masoud (2021)

Kerf Bending and Zipper-in Spatial Timber Tectonics

ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by B. Bogosian, K. Dörfler, B. Farahi, J. Garcia del Castillo y López, J. Grant, V. Noel, S. Parascho, and J. Scott. 354-361. https://doi.org/10.52842/conf.acadia.2021.354

68.

Lu, Xin, Meng, Zeyuan, Rodriguez, Alvaro Lopez and Pantic, Igor (2022)

Reusable Augmented Concrete Casting System - Accessible method for formwork manufacturing through holographic guidance

Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 1, Ghent, 13-16 September 2022, pp. 371–380 https://doi.org/10.52842/conf.ecaade.2022.1.371

69.

Mariano, Pedro Oscar Pizzetti, Maia, Mirian Aparecida, Campos, Bruna Pacheco and Vaz, Carlos Eduardo Verzola (2021)

Automated Generation of Layouts and Budgets: Development and Application from Written Programming and Parametric Modeling

Gomez, P and Braida, F (eds.), Designing Possibilities - Proceedings of the XXV International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2021), Online, 8 - 12 November 2021, pp. 759–770 https://papers.cumincad.org/cgi-bin/works/Show?sigradi2021_185

70.

Naboni, Roberto and Marino, Dario (2021)

Wedged Kerfing. Design and Fabrication Experiments in Programmed Wood Bending

Gomez, P and Braida, F (eds.), Designing Possibilities - Proceedings of the XXV International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2021), Online, 8 - 12 November 2021, pp. 1283–1294 https://papers.cumincad.org/cgi-bin/works/Show?sigradi2021_85

71.

Naylor, John Osmond (2021)

Protection by Generative Design - Designing for full-culm bamboo durability using sunlight-hours modelling in Ladybug

Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 1, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 315-324 https://doi.org/10.52842/conf.ecaade.2021.1.315

72.

Nejur, Andrei and Balaban, Thomas (2022)

The A(fin)ne Pavilion - Pandemic adapted architectural studio fabrication

Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 2, Ghent, 13-16 September 2022, pp. 507–516 https://doi.org/10.52842/conf.ecaade.2022.2.507

73.

Nejur, Andrei and Szentesi-Nejur, Szende (2021)

The F8LD mask - Parametrized on-body design for personal protection.

A. Globa, J. van Ameijde, A. Fingrut, N. Kim, T.T.S. Lo (eds.), PROJECTIONS - Proceedings of the 26th CAADRIA Conference - Volume 1, The Chinese University of Hong Kong and Online, Hong Kong, 29 March - 1 April 2021, pp. 503-512 https://doi.org/10.52842/conf.caadria.2021.1.503

74.

Oral, Hülya and Çolakoglu, Meryem Birgül (2021)

The reconfiguration of tool parameters in clay extruder

Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 2, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 161-170 https://doi.org/10.52842/conf.ecaade.2021.2.161

75.

Ostrowska-Wawryniuk, Karolina (2021)

Prefabrication 4.0: BIM-aided design of sustainable DIY-oriented houses

International Journal of Architectural Computing 2021, Vol. 19 - no. 2, 142–156 https://papers.cumincad.org/cgi-bin/works/Show?ijac202119202

76.

Papeschi, Annarita, Pasquero, Claudia and Colletti, Marjan (2022)

Pervasive Eyes Asturias - A wider representation through performative feedback

Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 1, Ghent, 13-16 September 2022, pp. 525–534 https://doi.org/10.52842/conf.ecaade.2022.1.525

77.

Ray Choudhury, Surjyatapa (2021)

PUCCA 5.0 - A framework for a digital system to aid informal self-construction

A. Globa, J. van Ameijde, A. Fingrut, N. Kim, T.T.S. Lo (eds.), PROJECTIONS - Proceedings of the 26th CAADRIA Conference - Volume 1, The Chinese University of Hong Kong and Online, Hong Kong, 29 March - 1 April 2021, pp. 703-712 https://doi.org/10.52842/conf.caadria.2021.1.703

78.

Rennen, Philipp; Khader, Noor; Hack, Norman; Kloft, Harald (2021)

A Hybrid Additive Manufacturing Approach

ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by B. Bogosian, K. Dörfler, B. Farahi, J. Garcia del Castillo y López, J. Grant, V. Noel, S. Parascho, and J. Scott. 428-437. https://doi.org/10.52842/conf.acadia.2021.428

79.

Robby, Klara; Erik, Kraft; Rupert, Demaine; Riccardo, Maleczek; Tomohiro, Foschi; , Tachi (2021)

Lotus: A curved folding design tool for Grasshopper

ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by B. Bogosian, K. Dörfler, B. Farahi, J. Garcia del Castillo y López, J. Grant, V. Noel, S. Parascho, and J. Scott. 194-203. https://doi.org/10.52842/conf.acadia.2021.194

80.

Ruan, Daniel; Adel, Arash (2023)

Robotic Fabrication of Nail Laminated Timber: A Case Study Exhibition

ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 1: Projects Catalog of the 43rd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 220-225. https://papers.cumincad.org/cgi-bin/works/Show?acadia23_v1_220

For more results click below: