Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 61 to 80 of 681

Reformat results as: short short into frame detailed detailed into frame

61.

Gajda, Weronika and Cannaerts, Corneel (2022)

Citography - Mapping collective mediated experiences

Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 2, Ghent, 13-16 September 2022, pp. 297–305 https://doi.org/10.52842/conf.ecaade.2022.2.297

62.

Galbes Breda de Lima, Eduardo; Helena Tanoue Vizioli, Simone (2022)

Virtual reality and the familiarization of the University Campus space: USP Sao Carlos

Herrera, PC, Dreifuss-Serrano, C, Gómez, P, Arris-Calderon, LF, Critical Appropriations - Proceedings of the XXVI Conference of the Iberoamerican Society of Digital Graphics (SIGraDi 2022), Universidad Peruana de Ciencias Aplicadas, Lima, 7-11 November 2022 , pp. 749–760 https://papers.cumincad.org/cgi-bin/works/Show?sigradi2022_228

63.

Garcia-Alvarado, Rodrigo; Banda Perez, Pablo; Moroni Orellana, Ginnia (2022)

Architectural Diversity of Residential Buildings through Digital Design and Robotic Construction

Herrera, PC, Dreifuss-Serrano, C, Gómez, P, Arris-Calderon, LF, Critical Appropriations - Proceedings of the XXVI Conference of the Iberoamerican Society of Digital Graphics (SIGraDi 2022), Universidad Peruana de Ciencias Aplicadas, Lima, 7-11 November 2022 , pp. 957–966 https://papers.cumincad.org/cgi-bin/works/Show?sigradi2022_66

64.

Grisiute, Ayda, Silvennoinen, Heidi, Li, Shiying, Chadzynski, Arkadiusz, von Richthofen, Aurel and Herthogs, Pieter (2022)

Unlocking Urban Simulation Data with a Semantic City Planning System - Ontologically representing and integrating MATSim output data in a knowledge graph

Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 2, Ghent, 13-16 September 2022, pp. 257–266 https://doi.org/10.52842/conf.ecaade.2022.2.257

65.

Griz, Cristiana; Andrade, Max; Mendes, Leticia; Neri, Emmanoel; Vidal, Edwin (2022)

BIM Adoption in an Architecture and Urbanism course: analysis of the degree of maturity

Herrera, PC, Dreifuss-Serrano, C, Gómez, P, Arris-Calderon, LF, Critical Appropriations - Proceedings of the XXVI Conference of the Iberoamerican Society of Digital Graphics (SIGraDi 2022), Universidad Peruana de Ciencias Aplicadas, Lima, 7-11 November 2022 , pp. 799–810 https://papers.cumincad.org/cgi-bin/works/Show?sigradi2022_143

66.

Ham, Jeremy, Woessner, Uwe and Kieferle, Joachim (2022)

Exploring Synaespatia within a Networked Musico-Spatial Virtual Environment

Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 2, Ghent, 13-16 September 2022, pp. 467–474 https://doi.org/10.52842/conf.ecaade.2022.2.467

67.

Hamzaoglu, Begüm, Özkar, Mine and Aydin, Serdar (2022)

Towards a Digital Practice of Historical Stone Carvings

Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 2, Ghent, 13-16 September 2022, pp. 227–234 https://doi.org/10.52842/conf.ecaade.2022.2.227

68.

Isik, Gulbahar; Achten, Henri (2022)

Architectural hybrid (Physical-Digital) Prototyping in Design Processes with Digital Twin Technologies

Hybrid Spaces of the Metaverse - Architecture in the Age of the Metaverse: Opportunities and Potentials [10th ASCAAD Conference Proceedings] Debbieh (Lebanon) [Virtual Conference] 12-13 October 2022, pp. 43-60 https://papers.cumincad.org/cgi-bin/works/Show?ascaad2022_057

69.

Kladeftira, Marirena; Leschok, Matthias; Skevaki, Eleni; Tanadini, Davide; Ole Ohlbrock, Patrick; D’Acunto, Pierluigi; Dillenburger, Benjamin (2022)

Digital Bamboo

ACADIA 2022: Hybrids and Haecceities [Proceedings of the 42nd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. University of Pennsylvania Stuart Weitzman School of Design. 27-29 October 2022. edited by M. Akbarzadeh, D. Aviv, H. Jamelle, and R. Stuart-Smith. 406-417. https://papers.cumincad.org/cgi-bin/works/Show?acadia22_406

70.

Kruºa Yemiºcioglu, Müge, Gönenç Sorguç, Arzu and Yetkin, Ozan (2022)

Levels of Mapping in Nature-informed Studies - A case study on informed wall

Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 1, Ghent, 13-16 September 2022, pp. 271–280 https://doi.org/10.52842/conf.ecaade.2022.1.271

71.

Körner, Andreas (2022)

Chromogenic Composites - A case study combining thermochromics with heat transfer simulations and digital fabrication in architectural education

Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 1, Ghent, 13-16 September 2022, pp. 291–300 https://doi.org/10.52842/conf.ecaade.2022.1.291

72.

Li, Andre, Zhang, Hong, Cui, Weiwen and Huang, Jie (2022)

Implementation of Point Cloud and BIM Technologies in a Construction Workflow: A Case Study of a Building Project in Yuecheng District, China

Jeroen van Ameijde, Nicole Gardner, Kyung Hoon Hyun, Dan Luo, Urvi Sheth (eds.), POST-CARBON - Proceedings of the 27th CAADRIA Conference, Sydney, 9-15 April 2022, pp. 567-576 https://doi.org/10.52842/conf.caadria.2022.2.567

73.

Li, Chao; Petzold, Frank (2022)

Towards Informed Design Decision Support of Additive Manufacturing in Construction: The Use of Integrated Knowledge in BIM-based Architectural Design

Hybrid Spaces of the Metaverse - Architecture in the Age of the Metaverse: Opportunities and Potentials [10th ASCAAD Conference Proceedings] Debbieh (Lebanon) [Virtual Conference] 12-13 October 2022, pp. 237-252 https://papers.cumincad.org/cgi-bin/works/Show?ascaad2022_064

74.

Lima, Micaele, Aguiar, Beatriz Natália, Romcy, Neliza, Lima, Mariana and Cardoso, Daniel (2023)

Systematization of Scientific Production of Extended Reality in Teaching and Design Process in Architecture and Urbanism

García Amen, F, Goni Fitipaldo, A L and Armagno Gentile, Á (eds.), Accelerated Landscapes - Proceedings of the XXVII International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2023), Punta del Este, Maldonado, Uruguay, 29 November - 1 December 2023, pp. 1397–1408 https://papers.cumincad.org/cgi-bin/works/Show?sigradi2023_369

75.

Lin, Yuxin (2022)

Rhetoric, Writing, and Anexact Architecture: The Experiment of Natural Language Processing (NLP) and Computer Vision (CV) in Architectural Design

Jeroen van Ameijde, Nicole Gardner, Kyung Hoon Hyun, Dan Luo, Urvi Sheth (eds.), POST-CARBON - Proceedings of the 27th CAADRIA Conference, Sydney, 9-15 April 2022, pp. 343-352 https://doi.org/10.52842/conf.caadria.2022.1.343

76.

Liu, Sijie, Wei, Ziru and Wang, Sining (2022)

On-site Holographic Building Construction: A Case Study of Aurora

Jeroen van Ameijde, Nicole Gardner, Kyung Hoon Hyun, Dan Luo, Urvi Sheth (eds.), POST-CARBON - Proceedings of the 27th CAADRIA Conference, Sydney, 9-15 April 2022, pp. 405-414 https://doi.org/10.52842/conf.caadria.2022.2.405

77.

Lok, Leslie and Bae, Jiyoon (2022)

Timber De-Standardized 2.0 : Mixed Reality Visualizations and User Interface for Processing Irregular Timber

Jeroen van Ameijde, Nicole Gardner, Kyung Hoon Hyun, Dan Luo, Urvi Sheth (eds.), POST-CARBON - Proceedings of the 27th CAADRIA Conference, Sydney, 9-15 April 2022, pp. 121-130 https://doi.org/10.52842/conf.caadria.2022.2.121

78.

Lüling, Claudia and Carl, Timo (2022)

Fuzzy 3D Fabrics & Precise 3D Printing - Combining research with design-build investigations

Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 1, Ghent, 13-16 September 2022, pp. 67–76 https://doi.org/10.52842/conf.ecaade.2022.1.067

79.

Nanasca, James and Beebe, Aaron G. (2022)

Dynamic Projection

Jeroen van Ameijde, Nicole Gardner, Kyung Hoon Hyun, Dan Luo, Urvi Sheth (eds.), POST-CARBON - Proceedings of the 27th CAADRIA Conference, Sydney, 9-15 April 2022, pp. 39-48 https://doi.org/10.52842/conf.caadria.2022.1.039

80.

Ozden, Suedanur; Arslanturk, Esra; Senem, Mehmet; As, Imdat (2022)

Gamification in Urban Planning: Experiencing the Future City

Hybrid Spaces of the Metaverse - Architecture in the Age of the Metaverse: Opportunities and Potentials [10th ASCAAD Conference Proceedings] Debbieh (Lebanon) [Virtual Conference] 12-13 October 2022, pp. 530-547 https://papers.cumincad.org/cgi-bin/works/Show?ascaad2022_093

For more results click below: