Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 61 to 80 of 676

Reformat results as: short short into frame detailed detailed into frame

61.

Carl, Timo and Weilandt, Agnes (2022)

From Sheet to Folded Plate Structure - Design & build investigations with an interdisciplinary student team

Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 2, Ghent, 13-16 September 2022, pp. 517–524 https://doi.org/10.52842/conf.ecaade.2022.2.517

62.

Chengbi Duan, Suyi Shen, Dingwen Bao, and Xin Yan (2022)

Exploration and Design of the Contemporary Bracket Set Through Topology Optimization

Proceedings of the 2022 DigitalFUTURES The 4st International Conference on Computational Design and Robotic Fabrication (CDRF 2022) https://doi.org/https://doi.org/10.1007/978-981-19-8637-6_34

63.

Das, Avishek, Brunsgaard, Camilla and Madsen, Claus Brondgaard (2022)

Understanding the AR-VR Based Architectural Design Workflow among Selected Danish Architecture Practices

Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 1, Ghent, 13-16 September 2022, pp. 381–388 https://doi.org/10.52842/conf.ecaade.2022.1.381

64.

Dokonal, Wolfgang, Mosler, Pascal, Gehring, Maximilian and Rüppel, Uwe (2022)

On the Road towards? - Developing a toolset for a low-cost VR-enhanced design approach

Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 1, Ghent, 13-16 September 2022, pp. 163–169 https://doi.org/10.52842/conf.ecaade.2022.1.163

65.

Gardner, Nicole, Haeusler, Matthias Hank, Yu, Daniel, Barton, Jack, Dunn, Kate and Huang, Tracy (2022)

Revisiting Shoei Yoh: Developing a Workflow for a Browser-Based 3D Model Environment to Create an Immersive Digital Archive

Jeroen van Ameijde, Nicole Gardner, Kyung Hoon Hyun, Dan Luo, Urvi Sheth (eds.), POST-CARBON - Proceedings of the 27th CAADRIA Conference, Sydney, 9-15 April 2022, pp. 687-696 https://doi.org/10.52842/conf.caadria.2022.1.687

66.

Giesecke, Rena; Benjamin Dillenburger (2022)

Large-scale Robotic Fabrication of Polychromatic Relief Glass

International Journal of Architectural Computing 2022, Vol. 20 - no. 1, pp. 18–30 https://papers.cumincad.org/cgi-bin/works/Show?ijac202220102

67.

Globa, Anastasia; Lyu, Kun; Gocer, Ozgur; Yildirim, Muhammed (2022)

Implementation of Interactive Virtual Sites for Architectural Education

ACADIA 2022: Hybrids and Haecceities [Proceedings of the 42nd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. University of Pennsylvania Stuart Weitzman School of Design. 27-29 October 2022. edited by M. Akbarzadeh, D. Aviv, H. Jamelle, and R. Stuart-Smith. 108-119. https://papers.cumincad.org/cgi-bin/works/Show?acadia22_108

68.

Gong, Lei, Zhou, Yifan, Zheng, Lang and Yuan, Philip F. (2022)

Extrusion-Based 3d Printing for Recyclable Gypsum

Jeroen van Ameijde, Nicole Gardner, Kyung Hoon Hyun, Dan Luo, Urvi Sheth (eds.), POST-CARBON - Proceedings of the 27th CAADRIA Conference, Sydney, 9-15 April 2022, pp. 273-282 https://doi.org/10.52842/conf.caadria.2022.2.273

69.

Gong, Pixin, Huang, Xiaoran, Huang, Chenyu and White, Marcus (2022)

Machine Learning-Based Walkability Modeling in Urban Life Circle

Jeroen van Ameijde, Nicole Gardner, Kyung Hoon Hyun, Dan Luo, Urvi Sheth (eds.), POST-CARBON - Proceedings of the 27th CAADRIA Conference, Sydney, 9-15 April 2022, pp. 645-654 https://doi.org/10.52842/conf.caadria.2022.1.645

70.

Guo, Yiyao, Luo, Yang, Wang, Sihan, Tan, Ying Yi and Tracy, Kenneth (2022)

Robotic Fabrication of Topology Optimized Concrete Components With Reusable Formwork

Jeroen van Ameijde, Nicole Gardner, Kyung Hoon Hyun, Dan Luo, Urvi Sheth (eds.), POST-CARBON - Proceedings of the 27th CAADRIA Conference, Sydney, 9-15 April 2022, pp. 91-100 https://doi.org/10.52842/conf.caadria.2022.2.091

71.

Hamzaoglu, Begüm, Özkar, Mine and Aydin, Serdar (2022)

Towards a Digital Practice of Historical Stone Carvings

Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 2, Ghent, 13-16 September 2022, pp. 227–234 https://doi.org/10.52842/conf.ecaade.2022.2.227

72.

Hauptman, Jonas; Haghnazar, Ramtin; Moghaddam, Sara Saghafi (2022)

Developing a Digital Design Workflow for Nexorade Bamboo Structure

ACADIA 2022: Hybrids and Haecceities [Proceedings of the 42nd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. University of Pennsylvania Stuart Weitzman School of Design. 27-29 October 2022. edited by M. Akbarzadeh, D. Aviv, H. Jamelle, and R. Stuart-Smith. 366-377. https://papers.cumincad.org/cgi-bin/works/Show?acadia22_366

73.

Hemmerling, Marco (2022)

INTERCOM 2.0 – A web-based platform for collaborative design processes

Herrera, PC, Dreifuss-Serrano, C, Gómez, P, Arris-Calderon, LF, Critical Appropriations - Proceedings of the XXVI Conference of the Iberoamerican Society of Digital Graphics (SIGraDi 2022), Universidad Peruana de Ciencias Aplicadas, Lima, 7-11 November 2022 , pp. 823–832 https://papers.cumincad.org/cgi-bin/works/Show?sigradi2022_191

74.

Hsiao, Chi-Fu, Lee, Ching-Han, Chen, Chun-Yen, Fang, Yu-Cyuan and Chang, Teng-Wen (2022)

Training a Vision-Based Autonomous Robot From Material Bending Analysis to Deformation Variables Predictions With an XR Approach

Jeroen van Ameijde, Nicole Gardner, Kyung Hoon Hyun, Dan Luo, Urvi Sheth (eds.), POST-CARBON - Proceedings of the 27th CAADRIA Conference, Sydney, 9-15 April 2022, pp. 201-210 https://doi.org/10.52842/conf.caadria.2022.2.201

75.

Huang, Lee-Su; Spaw, Gregory (2023)

Augmented Reality Assisted Robotic: Tube Bending

ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 2: Proceedings of the 43rd Annual Conference for the Association for Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9891764-0-3]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 340-349. https://papers.cumincad.org/cgi-bin/works/Show?acadia23_v2_340

76.

Jauk, Julian; Lukas Gosch, Hana Vašatko, Ingolf Christian, Anita Klaus, Milena Stavric (2022)

MyCera. Application of mycelial growth within digitally manufactured clay structures

International Journal of Architectural Computing 2022, Vol. 20 - no. 1, pp. 31–40 https://papers.cumincad.org/cgi-bin/works/Show?ijac202220103

77.

Jovanovic, Luka, Ming, Leo, Doherty, Ben, Gardner, Nicole, Haeusler, M. Hank and Yu, K. Daniel (2022)

Automated Code Compliance Checking - A computational workflow for verifying model, parameter and regulatory compliance

Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 2, Ghent, 13-16 September 2022, pp. 319–328 https://doi.org/10.52842/conf.ecaade.2022.2.319

78.

Kanter, Jordan; Quinteros, Kamil (2022)

Gestural Design: Hand Tracking for Digital Drawing

Hybrid Spaces of the Metaverse - Architecture in the Age of the Metaverse: Opportunities and Potentials [10th ASCAAD Conference Proceedings] Debbieh (Lebanon) [Virtual Conference] 12-13 October 2022, pp. 30-42 https://papers.cumincad.org/cgi-bin/works/Show?ascaad2022_062

79.

Karimian-Aliabadi, Hamed, Adelzadeh, Amin and Robeller, Christopher (2022)

A Computational Workflow for Design-to-Assembly of Shingle Covering Systems for Multi-Curved Surface Structures

Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 1, Ghent, 13-16 September 2022, pp. 659–666 https://doi.org/10.52842/conf.ecaade.2022.1.659

80.

Khajehee, Arastoo, Yabe, Taisei, Lu, Xuanyu, Liu, Jia and Ikeda, Yasushi (2022)

Development of an Affordable On-Site Wood Craft System: Interactive Fabrication via Digital Tools

Jeroen van Ameijde, Nicole Gardner, Kyung Hoon Hyun, Dan Luo, Urvi Sheth (eds.), POST-CARBON - Proceedings of the 27th CAADRIA Conference, Sydney, 9-15 April 2022, pp. 31-40 https://doi.org/10.52842/conf.caadria.2022.2.031

For more results click below: