Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 14 of 14

Reformat results as: short short into frame detailed detailed into frame

_id	acadia08_118
id	acadia08_118
authors	Cabrinha, Mark
year	2008
title	Gridshell Tectonics: Material Values Digital Parameters
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 118-125
doi	https://doi.org/10.52842/conf.acadia.2008.118
summary	This paper begins with a simple proposition: rather than mimicking the geometric structures found in nature, perhaps the most effective modes of sustainable fabrication can be found through understanding the nature of materials themselves. Material becomes a design parameter through the constraints of fabrication tools, limitations of material size, and most importantly the productive capacity of material resistance—a given material’s capacity and tendencies to take shape, rather than cutting shape out of material. ¶ Gridshell structures provide an intriguing case study to pursue this proposition. Not only is there clear precedent in the form-finding experiments of Frei Otto and the Institute for Lightweight Structures, but also the very NURBS based tools of current design practices developed from the ability of wood to bend. Taking the bent wood spline quite literally, gridshells provide a means that is at once formally expressive, structurally optimized, materially efficient, and quite simply a delight to experience. The larger motivation of this work anticipates a parametric system linking the intrinsic material values of the gridshell tectonic with extrinsic criteria such as programmatic needs and environmental response. ¶ Through an applied case study of gridshells, the play between form and material is tested out through the author’s own experimentation with gridshells and the pedagogical results of two gridshell studios. The goal of this research is to establish a give-and-take relationship between top-down formal emphasis and a bottom-up material influence.
keywords	Digital Fabrication; Form-Finding; Material; Pedagogy; Structure
series	ACADIA
last changed	2022/06/07 07:54

_id	ecaade2023_138
id	ecaade2023_138
authors	Crolla, Kristof and Wong, Nichol
year	2023
title	Catenary Wooden Roof Structures: Precedent knowledge for future algorithmic design and construction optimisation
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 1, Graz, 20-22 September 2023, pp. 611–620
doi	https://doi.org/10.52842/conf.ecaade.2023.1.611
summary	The timber industry is expanding, including construction wood product applications such as glue-laminated wood products (R. Sikkema et al., 2023). To boost further utilisation of engineered wood products in architecture, further development and optimisation of related tectonic systems is required. Integration of digital design technologies in this endeavour presents opportunities for a more performative and spatially diverse architecture production, even in construction contexts typified by limited means and/or resources. This paper reports on historic precedent case study research that informs an ongoing larger study focussing on novel algorithmic methods for the design and production of lightweight, large-span, catenary glulam roof structures. Given their structural operation in full tension, catenary-based roof structures substantially reduce material needs when compared with those relying on straight beams (Wong and Crolla, 2019). Yet, the manufacture of their non-standard geometries typically requires costly bespoke hardware setups, having resulted in recent projects trending away from the more spatially engaging geometric experiments of the second half of the 20th century. The study hypothesis that the evolutionary design optimisation of this tectonic system has the potential to re-open and expand its practically available design solution space. This paper covers the review of a range of built projects employing catenary glulam roof system, starting from seminal historic precedents like the Festival Hall for the Swiss National Exhibition EXPO 1964 (A. Lozeron, Swiss, 1964) and the Wilkhahn Pavilions (Frei Otto, Germany, 1987), to contemporary examples, including the Grandview Heights Aquatic Centre (HCMA Architecture + Design, Canada, 2016). It analysis their structural concept, geometric and spatial complexity, fabrication and assembly protocols, applied construction detailing solutions, and more, with as aim to identify methods, tools, techniques, and construction details that can be taken forward in future research aimed at minimising construction complexity. Findings from this precedent study form the basis for the evolutionary-algorithmic design and construction method development that is part of the larger study. By expanding the tectonic system’s practically applicable architecture design solution space and facilitating architects’ access to a low-tech producible, spatially versatile, lightweight, eco-friendly, wooden roof structure typology, this study contributes to environmentally sustainable building.
keywords	Precedent Studies, Light-weight architecture, Timber shell, Catenary, Algorithmic Optimisation, Glue-laminated timber
series	eCAADe
email
last changed	2023/12/10 10:49

_id	caadria2013_210
id	caadria2013_210
authors	Baerlecken, Daniel; Katherine Johnson and Alice Vialard
year	2013
title	Mobilized Materials – Textile Constructs
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 333-342
doi	https://doi.org/10.52842/conf.caadria.2013.333
wos	WOS:000351496100033
summary	This paper investigates textiles techniques and their potential for creating ornamental and structural systems investigated through a sequence of design studios. Within the paper 3 examples of textile systems are introduced that range from a Semperian approach (wall as dress) to form finding experiments with active textile materials (Frei Otto).
keywords	extiles, Form-finding, Analogue computing, Design methodology, Craft
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2014_207
id	caadria2014_207
authors	Beorkrem, Christopher and Charles Davis II
year	2014
title	A Primitive Parametric
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 893–902
doi	https://doi.org/10.52842/conf.caadria.2014.893
summary	This paper describes the products of an exhibition organized by the authors that speculatively reconstructed the ‘long history’ of Architectural Biology to recover the cultural potential of biological metaphors in contemporary architecture. The extended historical timeline of the show spanned from the second half of the nineteenth century to the present. However, in contrast to previous shows that have isolated modern architects’ interests in the formalist principles of biology, this show examined the formal and cultural prerogatives of modern architects in tandem with one another. This historical framework encouraged the speculative analysis of the social and political relevance of contemporary claims, which inherently challenges the ahistorical bias of the postcritical debates that emerged in the new millennium. Widening our gaze to examine the ‘long history’ of biological metaphors in architecture enabled us to recuperate the cultural significance that biological references have accrued within the discipline of architecture. This disciplinary history promises to repair the historical amnesia that has beset contemporary architects who limit their analysis of biology to formalist principles of design. A key component of the exhibit was the conceptual pairing of the ‘primitive’ (cultural) concerns of nineteenth-century figures with the ‘parametric’ (formal) concerns of postwar and contemporary architects. Using Gottfried Semper as a representative figure for the former position, we reinterpreted the inherent cultural meaning of postwar and contemporary architectural works, including those completed by Frei Otto, Achim Menges, Lars Spuybroek, SHoP, and Evan Douglis. The material potential of this approach was expressed in the making of analytical maps, digital models, and conceptual drawings that explored the latent ‘primitive’ themes of contemporary ‘parametric’ designs.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2018_130
id	ecaade2018_130
authors	Carl, Timo, Stepper, Frank and Schein, Markus
year	2018
title	Solar Spline - Expanding on traditional sun-sail typologies and Frei Otto´s lightweight approach with the help of computational design procedures
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 149-156
doi	https://doi.org/10.52842/conf.ecaade.2018.1.149
summary	This paper presents the design and production processes of a real world organic photovoltaic lightweight installation realized at the University and School of Art, Kassel. It revisits thereby, Frei Otto´s lightweight principles to establish design criteria. Furthermore, we present the possibilities of computational procedures for the design of contemporary lightweight structures within a speculative design setting. Last, we illustrate the benefits of these tools for the design of lightweight structures and the role they played in re-conceptualizing traditional sun-sail typologies within an interdisciplinary student team.
keywords	Lightweight Structures; Form-Finding; Computational Design; Interdisciplinary Collaboration
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2014_096
id	ecaade2014_096
authors	Daniel Norell and Einar Rodhe
year	2014
title	Erratic - The Material Simulacra of Pliable Surfaces
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 145-152
doi	https://doi.org/10.52842/conf.ecaade.2014.2.145
wos	WOS:000361385100015
summary	This paper examines how designers can invigorate designs with a sense of liveliness and indeterminacy through manipulation of pliable materials. Two approaches to material manipulation are defined and juxtaposed in the paper: The control associated with Frei Otto's elegantly tensioned membranes and the noise associated with Sigurd Lewerentz's intensely material brick walls. These historical approaches become pertinent in relation to current opportunities offered by material simulation software in architecture. Simulation may be used to increase control over the materialization of design, but is at the same time a way to introduce the noise of real-time, real-world experiments into digital design. The paper presents this discussion in parallel with documentation of the research project 'Erratic', a recent installation carried out by the authors' practice Norell/Rodhe. Constructed from polyurethane cold foam, the project combines analogue experiments with digital simulations to target architectural qualities like mass, figuration and relief.
keywords	Control; material manipulation; material simulation; noise; pliable surfaces
series	eCAADe
email
last changed	2022/06/07 07:55

_id	acadia15_81
id	acadia15_81
authors	Hussein, Ahmed
year	2015
title	Sandworks / Sand Tectonic Prototype
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 81-94
doi	https://doi.org/10.52842/conf.acadia.2015.081
summary	This paper outlines a material based research that proposes a time-based architecture that extends Frei Otto’s research of sand formations using sand’s natural angle of repose. The tectonic system focuses on developing compressive structures of sand for hot climate desert areas through a zero-waste formative process whose architecture reorganizes materials naturally available on the site. Formations are hardened as a surface through the phase changing properties of a saline solution which crystallizes when cooled, bonding with the sand. The proportion of insulation material defines the building life span redistributes the materials back into its environment at the end of its cycle. The materiality and spatial qualities of the project are based on the conical and constant angle surfaces generated through the gravitational process of sand formation. Between the digital opportunities of sand formation and its physical possibilities, this paper outlines the analogue-digital methods of sand computation through a comprehensive study in four main sections; material system, material computation, design system and robotic fabrication.
keywords	Material computation, analogues digital methods, Sand, Digital design and robotic fabrication, ecological tectonic system
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:50

_id	acadia11_98
id	acadia11_98
authors	Kudless, Andrew
year	2011
title	Bodies in Formation: The material evolution of flexible formworks
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 98-105
doi	https://doi.org/10.52842/conf.acadia.2011.098
summary	Borne from the complex negotiation between liquid mass and tensile constraint, flexible formwork castings are resonant with material energy. Hard as stone, yet visually supple and fluid, the pre-cast architectural assemblies produced using flexible formwork techniques suggest integrative design strategies that acknowledge the intricate associations between form, fabrication, and material behavior. This tripartite synthesis between geometry, making, and performance has emerged as one of the central themes of contemporary architecture and engineering. Borrowing ideas of morphology from biology and physics, 20th century architectural innovators such as Antoni Gaudi and Frei Otto built a legacy of material practice that incorporated methods of making with material and geometric logics. The emergent effects (and affects) produced through these highly integrative practices serve as the basis of much of the research and design at Matsys. Building on the flexible formwork research of Miguel Fisac in the 1970s, the P_Wall series by Matsys explores the use of digital tools in the generation and fabrication of these bodies in formation.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:52

_id	caadria2014_102
id	caadria2014_102
authors	Lopes, João V.; Alexandra C. Paio and José P. Sousa
year	2014
title	Parametric Urban Models Based on Frei Otto’s Generative Form-Finding Processes
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 595–604
doi	https://doi.org/10.52842/conf.caadria.2014.595
summary	Presently there is a progressive tendency to incorporate parametric design strategies in urban planning and design. Although the computational technologies that allow it are recent, fundamental theories and thinking processes behind it can be traced back to the work conducted at the Institute for Lightweight Structures (IL) in Stuttgart, between the 1960’s and 1980’s. This paper describes an experimental urban research work based on Frei Otto and Eda Schaur's thoughts on unplanned settlements, and on the form-finding experiences carried out at IL. By exploring the digital development of parametric and algorithmic interactive models, two urban design proposals were developed for a site in Porto city. Out of this experience, this paper suggests that today the act of design can benefit from a deeper understanding of the natural processes of occupation and connection.
keywords	Parametric urbanism; generative design; form-finding; Frei Otto
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	ecaade2018_325
id	ecaade2018_325
authors	Peteinarelis, Alexandros and Yiannoudes, Socrates
year	2018
title	Parametric Models and Algorithmic Thinking in Architectural Education
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 401-410
doi	https://doi.org/10.52842/conf.ecaade.2018.2.401
summary	Part of our research and teaching agenda at the School of Architecture of the Technical University of Crete focuses on algorithmic design with parametric models, its methodological characteristics and the study of applied and theoretical work that defined this architectural design thinking. Our work challenges architectural design processes, through the systematic study of parametric models. This paper presents three projects from the undergraduate elective course "Special Topics in Architectural Design", which took place during the spring semester of 2017, that investigated parametric models for a given architectural problem, inspired, to some extent, by precedents in 20th century architecture where students traced algorithmic design thinking. Although students understood well the concept and function of parametric models and in many cases applied them successfully for their design objectives, several of them did not fully assimilate some critical aspects of computation. This allowed us to determine areas of improvement and points of complete reevaluation in our educational strategy approach.
keywords	algorithmic thinking; parametric model; computational thinking; architectural education; Frei Otto
series	eCAADe
email
last changed	2022/06/07 08:00

_id	ecaadesigradi2019_669
id	ecaadesigradi2019_669
authors	Spaeth, A. Benjamin
year	2019
title	Aesthetics in Computational Design - A reflection on Max Bense's theory on aesthetics of information and state of things.
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 855-862
doi	https://doi.org/10.52842/conf.ecaade.2019.2.855
summary	Current dominance of functionalist and performance related approaches to computational design and methods in architecture are investigated under the precondition of Max Bense's theory of aesthetic potential. Establishing Bense's taxonomy of aesthetic potential and applying it to selected computational methods the level of aesthetic potential within the different computational approaches is investigated. Frei Otto's soap bubble experiments serve as a reference to illustrate different levels of aesthetic potential. Bense's aesthetic potential, which lies not in the eye of the beholder but is immanent to the object itself as a property of the object, suggests that computational design systems synthesising objects based on rules or embedded constraints appear to either have little aesthetic potential or receive their aesthetic potential form the outside of the computational system, namely the interaction with the user. Evolutionary design systems appear to create objects or processes with a certain aesthetic potential within Bense's theoretical framework.
keywords	Max Bense; aesthetic states; computational aesthetics; aesthetic theory
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:56

_id	ecaade2015_143
id	ecaade2015_143
authors	Symeonidou, Ioanna
year	2015
title	Flexible Matter - A Real-Time Shape Exploration Employing Analogue and Digital Form-Finding of Tensile Structures
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 135-142
doi	https://doi.org/10.52842/conf.ecaade.2015.2.135
wos	WOS:000372316000017
summary	The paper presents a research on real-time shape exploration employing analogue and digital form-finding and concludes with a proposal for a teaching methodology that led to an intensive student workshop which took place at Graz University of Technology during 2014. The aim was to experiment with analogue and digital tools in parallel, counter-informing the design process. The experiments involved physical form-finding following the tradition of Frei Otto at the Institute of Lightweight Structures in Stuttgart as well as computational form-finding employing mainly dynamic relaxation techniques of spring-particle systems. The combination of techniques and methodologies eventually led to a feedback loop across different media that explored both qualitative and quantitative characteristics of the projects at hand. By establishing feedback between digital media and physical prototypes, the creative process is immediately informed by the material characteristics and properties which in turn give rise to a real-time exploration of form.Simulations of physical forces for architectural form generation are increasingly gaining ground in architectural education as there is a broad selection of computational tools readily available that allow quick experiments to be conducted.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=12e288be-6e8c-11e5-a73c-5fc23ebf2095
last changed	2022/06/07 07:56

_id	ijac201614402
id	ijac201614402
authors	Symeonidou, Ioanna
year	2016
title	Flexible matter: A real-time shape exploration employing analogue and digital form-finding of tensile structures
source	International Journal of Architectural Computing vol. 14 - no. 4, 322–332
summary	The article presents a research on real-time shape exploration employing analogue and digital form-finding and concludes with a proposal for a teaching methodology that led to an intensive student workshop which took place at the Institute of Architecture and Media at Graz University of Technology. The aim was to experiment with analogue and digital tools in parallel, counter-informing the design process. The experiments involved physical form-finding following the tradition of Frei Otto at the Institute of Lightweight Structures in Stuttgart as well as computational form- finding employing mainly dynamic relaxation techniques of spring-particle systems. The combination of techniques and methodologies eventually led to a feedback loop across different media that explored both qualitative and quantitative characteristics of the projects at hand. By establishing feedback between digital media and physical prototypes, the creative process is immediately informed by the material characteristics and properties which in turn give rise to a real-time exploration of form. Simulations of physical forces for architectural form generation are increasingly gaining ground in architectural education as there is a broad selection of computational tools readily available that allow quick experiments to be conducted.
keywords	Form-finding, analogue–digital, parametric design, tensile structures, computational physics simulation, experiential learning
series	journal
email
last changed	2016/12/09 10:52

_id	ecaadesigradi2019_201
id	ecaadesigradi2019_201
authors	Torreblanca-Díaz, David A., Pati?o, Ever, Valencia-Escobar, Andrés and Urdinola, Diana
year	2019
title	Form-finding methodology as strategy for formative research in industrial design education - Experimental techniques for the early creative phases of the product design process
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 45-54
doi	https://doi.org/10.52842/conf.ecaade.2019.1.045
summary	The experimental work of Antoni Gaudí and Frei Otto have been the precedents of what is currently called form-finding, a methodology based on rules and physical forces of nature that promotes principles of transformation as a result of the relationship between form, material and structure. This text shows the first results of the research titled as Form-finding methodology as strategy for formative research in industrial design education, with an empirical-analytical approach through action-research based method and using collaborative-participatory tools. As a result of the analysis of different cases in the first stage of the research, a basic methodological proposal is made, this methodological proposal is aimed to find new research possibilities for the identification of morphological characteristics to be used in design projects in the early creative phases (ideation and experimentation); the methodological proposal stages are the following: selection of technique, design of the experimentation, experimentation, analysis and discussion.
keywords	Form-finding; Experimental morphology; Industrial design education; Formative research; Action-research
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:58

No more hits.