Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 36

Reformat results as: short short into frame detailed detailed into frame

_id	cf2011_p018
id	cf2011_p018
authors	Sokmenoglu, Ahu; Cagdas Gulen, Sariyildiz Sevil
year	2011
title	A Multi-dimensional Exploration of Urban Attributes by Data Mining
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 333-350.
summary	The paper which is proposed here will introduce an ongoing research project aiming to research data mining as a methodology of knowledge discovery in urban feature analysis. To address the increasing multi-dimensional and relational complexity of urban environments requires a multidisciplinary approach to urban analysis. This research is an attempt to establish a link between knowledge discovery methodologies and automated urban feature analysis. Therefore, in the scope of this research we apply data mining methodologies for urban analysis. Data mining is defined as to extract important patterns and trends from raw data (Witten and Frank, 2005). When applied to discover relationships between urban attributes, data mining can constitute a methodology for the analysis of multi-dimensional relational complexity of urban environments (Gil, Montenegro, Beirao and Duarte, 2009) The theoretical motivation of the research is derived by the lack of explanatory urban knowledge which is an issue since 1970‚Äôs in the area of urban research. This situation is mostly associated with deductive methods of analysis. The analysis of urban system from the perspective of few interrelated factors, without considering the multi-dimensionality of the system in a deductive fashion was not been explanatory enough. (Jacobs, 1961, Lefebvre, 1970 Harvey, 1973) To address the multi-dimensional and relational complexity of urban environments requires the consideration of diverse spatial, social, economic, cultural, morphological, environmental, political etc. features of urban entities. The main claim is that, in urban analysis, there is a need to advance from traditional one dimensional (Marshall, 2004) description and classification of urban forms (e.g. Land-use maps, Density maps) to the consideration of the simultaneous multi-dimensionality of urban systems. For this purpose, this research proposes a methodology consisting of the application of data mining as a knowledge discovery method into a GIS based conceptual urban database built out of official real data of Beyoglu. Generally, the proposed methodology is a framework for representing and analyzing urban entities represented as objects with properties (attributes). It concerns the formulation of an urban entity‚Äôs database based on both available and non-available (constructed from available data) data, and then data mining of spatial and non-spatial attributes of the urban entities. Location or position is the primary reference basis for the data that is describing urban entities. Urban entities are; building floors, buildings, building blocks, streets, geographically defined districts and neighborhoods etc. Urban attributes are district properties of locations (such as land-use, land value, slope, view and so forth) that change from one location to another. Every basic urban entity is unique in terms of its attributes. All the available qualitative and quantitative attributes that is relavant (in the mind of the analyst) and appropriate for encoding, can be coded inside the computer representation of the basic urban entity. Our methodology is applied by using the real and official, the most complex, complete and up-to-dataset of Beyoglu (a historical neighborhood of Istanbul) that is provided by the Istanbul Metropolitan Municipality (IBB). Basically, in our research, data mining in the context of urban data is introduced as a computer based, data-driven, context-specific approach for supporting analysis of urban systems without relying on any existing theories. Data mining in the context of urban data; ‚Ä¢ Can help in the design process by providing site-specific insight through deeper understanding of urban data. ‚Ä¢ Can produce results that can assist architects and urban planners at design, policy and strategy levels. ‚Ä¢ Can constitute a robust scientific base for rule definition in urban simulation applications such as urban growth prediction systems, land-use simulation models etc. In the paper, firstly we will present the framework of our research with an emphasis on its theoretical background. Afterwards we will introduce our methodology in detail and finally we will present some of important results of data mining analysis processed in Rapid Miner open-source software. Specifically, our research define a general framework for knowledge discovery in urban feature analysis and enable the usage of GIS and data mining as complementary applications in urban feature analysis. Acknowledgments I would like to thank to Nuffic, the Netherlands Organization for International Cooperation in Higher Education, for funding of this research. I would like to thank Ceyhun Burak Akgul for his support in Data Mining and to H. Serdar Kaya for his support in GIS.
keywords	urban feature analysis, data mining, urban database, urban complexity, GIS
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ascaad2010_279
id	ascaad2010_279
authors	Celani, G.; L. Medrano; J. Spinelli
year	2010
title	Unicamp 2030: A plan for increasing a university campus in a sustainable way and an example of integrated use of CAAD simulation and computational design strategies
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 279-286
summary	The state university of Campinas, Unicamp, is a public university in upstate São Paulo, Brazil, ranked the second best in the country. It was founded in 1966, and its main campus started to be built in 1967, in the suburbs of Campinas, nowadays a two-million people city. The area of the campus is almost 3 million square meters (300 hectares), with a total built area of 522.000 m2 and a population of 40 thousand people - 30 thousand students, 2 thousand faculty members and almost 8 thousand staff members. The campus’ gross population density is 133 people per hectare. Less than 6% of the total campus area is presently occupied. The design of Unicamp's campus is based on concepts that were typical of the modern movement, with reminiscences of corbusian urbanism, in which preference is given to cars and buildings are spread apart on the territory, with little concern to the circulation of pedestrians. The standard building type that has been built on campus since the 1970's is based on non-recyclable materials, and has a poor thermal performance. Unicamp is expected to double its number of students by the year 2030. The campus density is thus expected to grow from 600 people per hectare to almost 1,000 people per hectare. The need to construct new buildings is seen as an opportunity to correct certain characteristics of the campus that are now seen as mistakes, according to sustainability principles. This paper describes a set of proposals targeting the increase of the campus' density in a sustainable way. The plan also aims at increasing the quality of life on campus and diminishing its impact on the environment. The main targets are: - Reducing the average temperature by 2oC; - Reducing the average displacement time by 15 minutes; - Increasing the campus' density by 100%; - Reducing the CO2 emissions by 50%. // In order to achieve these goals, the following actions have been proposed: Developing a new standard building for the university, incorporating sustainability issues, such as the use of renewable and/or recyclable materials, the installation of rainwater storage tanks, the use of natural ventilation for cooling, sitting the buildings in such a way to decrease thermal gain, and other issues that are required for sustainable buildings' international certifications. To assess the performance of the new standard building, different simulation software were used, such as CFD for checking ventilation, light simulation software to assess energy consumption, and so on. 1. Filling up under-utilized urban areas in the campus with new buildings, to make better use of unused infrastructure and decrease the distance between buildings. 2. Proposing new bicycle paths in and outside campus, and proposing changes in the existing bicycle path to improve its safety. 3. Developing a landscape design plan that aims at creating shaded pedestrian and bicycle passageways.
series	ASCAAD
type	normal paper
email
last changed	2021/07/16 10:37

_id	ddss9436
id	ddss9436
authors	Gross, Mark D.
year	1994
title	Indexing the Electronic Sketchbook: Diagrams as Keys to Visual Databases
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	The question is how to index a visual database. Consider a visual database -- collection of drawings, three-dimensional models, scanned photographs, video, and text -- as a kind of modernmultimedia architectural sketchbook. It can be shared among a wide group of users with different purposes, and who may think about the contents in rather different ways. The connections -- perhaps hypertext -- among the entries may be complex and the organization difficult to comprehend. How then, to index the collection? Certainly traditional techniques -- looking for a concert hail -- built of concrete and glass -- in the 1970's in Utrecht and the architect's name is H* -- will help. But suppose we do not know so precisely what we are looking for? Might we appeal to the language of diagram? Can we add to our schemes for search and retrieval a diagrammatic index? We propose to try this idea. The paper describes our "computer as cocktail napkin" system for recognizing and interpreting diagrams. It consists of a pen-based freehand sketching program that recognizes simple symbols the user has trained (such as lines, shapes, letters, etc.) and spatial arrangements of these symbols. A graphical search procedure finds occurrences of a drawn configuration of symbols in the pages of a sketchbook made using the program. By extending thepages of the sketchbook to include photos, drawings, and text in addition to diagrams, we can use this technique to find items whose diagrams match a drawn search configuration. The paper will demonstrate this prototype program and explore its use for indexing visualdatabases in architecture.
series	DDSS
email
last changed	2003/08/07 16:36

_id	acadia08_286
id	acadia08_286
authors	Khan, Omar
year	2008
title	Reconfigurable Molds as Architecture Machines
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 286-291
doi	https://doi.org/10.52842/conf.acadia.2008.286
summary	In The Architecture Machine (1970), Nicholas Negroponte postulates the development of design machines wherein the “design process, considered as evolutionary, can be presented to a machine, also considered as evolutionary, and a mutual training, resilience, and growth can be developed.” The book, dedicated to “the first machine that can appreciate the gesture,” argues for developing machines with human like qualities. This paper aims to develop an alternative trajectory to the “evolutionary” architecture machine, this time not towards anthropomorphism but responsiveness. The aim on one level is the same: to create machines that appreciate the gesture. However our approach is tied to more modest aims and means that bring current thinking on evolutionary processes and the forming of materials together. The reconfigurable mold (RCM) is an architecture machine that produces parts that can be combined to create more complex organizations. The molds are simple analog computers that employ various continuous scales like volume, weight and heat to develop their unique components. Parametric alterations are made possible by affecting these measures in the process of fabrication. An underlying material that is instrumental in the molds is rubber, whose variable elasticity provides unique possibilities for indexing the gesture that remains elusive for industrial processes.
keywords	Casting; Digital Fabrication; Generative; Material; Morphogenesis
series	ACADIA
last changed	2022/06/07 07:52

_id	cf2005_1_31_28
id	cf2005_1_31_28
authors	PENG Chengzhi
year	2005
title	Townscaping: Development of Dynamic Virtual City Augmented 3D Sketch Design Tools
source	Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 105-114
summary	The paper presents the development of an experimental Web-based design environment called Townscaping to be used at the conceptual stage of architectural and urban design. Inspired by Gordon Cullen's seminal work on Townscape (1960's-1970's), the idea of Townscaping is to explore how 3D digital sketch design tools could be developed to operate in connection with a dynamic virtual city system under a user's direct control. A prototype of Townscaping has been designed and implemented on the basis of an existing dynamic virtual city system. In Townscaping, a set of tools is provided for users to create and edit 3D graphic elements to be positioned directly onto the user-specified virtual city models. One of the key features of Townscaping is to enable sketching while navigation: designers can perform sketch design and gain immediate visual feedback while navigating the 3D virtual city models to any viewpoint at any moment. The current study suggests that it is feasible for virtual city models to serve as interactive urban contexts for 3D sketch design. Townscaping is considered primarily a research platform with which we are interested in investigating if designers' engaging in 3D space conceptions may be enhanced through interacting and sketching with virtual townscapes.
keywords	virtual city, 3D sketch design, interactive urban visualisation, web-based design
series	CAAD Futures
email
last changed	2006/11/07 07:27

_id	caadria2006_601
id	caadria2006_601
authors	BINSU CHIANG, MAO-LIN CHIU
year	2006
title	PRIVATE/UN-PRIVATE SPACE: Scenario-based Digital Design for Enhancing User Awareness
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 601-603
doi	https://doi.org/10.52842/conf.caadria.2006.x.s8b
summary	Context awareness is important for human senses of places as well as human computer interaction. The aim of this research paper is focusing on controlling the user's privacy in a smart space which is adaptive to different users for enhancing the user's awareness in his diary life. In Environmental Psychology, the definition of privacy is that an individual has the control of deciding what information of himself is released to others, and under how he interact with others. (Westin 1970) And privacy is categorized as the linguistic privacy and visual privacy. (Sundstorm 1986). Solutions for privacy control: Plan Layout, Vision Boundary, Access Control and Architecture Metaphor - the transmission of information is not ascertainable for every single user. Although information are shown in public, but information is implied by cues and symbols. Only a certain user or a group of users have access to the full context of information. The methodology is to form an analytic framework to study the relationship between information, user and activities by using the computational supports derived from KitchenSense, ConceptNet, Python, 3d Studio Max and Flash; and to record patterns built up by users' behaviour and actions. Furthermore, the scenario-based simulation can envision the real world conditions by adding interfaces for enhancing user awareness.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	a6f1
authors	Bridges, A.H.
year	1986
title	Any Progress in Systematic Design?
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 5-15
summary	In order to discuss this question it is necessary to reflect awhile on design methods in general. The usual categorization discusses 'generations' of design methods, but Levy (1981) proposes an alternative approach. He identifies five paradigm shifts during the course of the twentieth century which have influenced design methods debate. The first paradigm shift was achieved by 1920, when concern with industrial arts could be seen to have replaced concern with craftsmanship. The second shift, occurring in the early 1930s, resulted in the conception of a design profession. The third happened in the 1950s, when the design methods debate emerged; the fourth took place around 1970 and saw the establishment of 'design research'. Now, in the 1980s, we are going through the fifth paradigm shift, associated with the adoption of a holistic approach to design theory and with the emergence of the concept of design ideology. A major point in Levy's paper was the observation that most of these paradigm shifts were associated with radical social reforms or political upheavals. For instance, we may associate concern about public participation with the 1970s shift and the possible use (or misuse) of knowledge, information and power with the 1980s shift. What has emerged, however, from the work of colleagues engaged since the 1970s in attempting to underpin the practice of design with a coherent body of design theory is increasing evidence of the fundamental nature of a person's engagement with the design activity. This includes evidence of the existence of two distinctive modes of thought, one of which can be described as cognitive modelling and the other which can be described as rational thinking. Cognitive modelling is imagining, seeing in the mind's eye. Rational thinking is linguistic thinking, engaging in a form of internal debate. Cognitive modelling is externalized through action, and through the construction of external representations, especially drawings. Rational thinking is externalized through verbal language and, more formally, through mathematical and scientific notations. Cognitive modelling is analogic, presentational, holistic, integrative and based upon pattern recognition and pattern manipulation. Rational thinking is digital, sequential, analytical, explicatory and based upon categorization and logical inference. There is some relationship between the evidence for two distinctive modes of thought and the evidence of specialization in cerebral hemispheres (Cross, 1984). Design methods have tended to focus upon the rational aspects of design and have, therefore, neglected the cognitive aspects. By recognizing that there are peculiar 'designerly' ways of thinking combining both types of thought process used to perceive, construct and comprehend design representations mentally and then transform them into an external manifestation current work in design theory is promising at last to have some relevance to design practice.
series	CAAD Futures
email
last changed	2003/11/21 15:16

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	ecaade2009_093
id	ecaade2009_093
authors	Elkær, Tim Nøhr
year	2009
title	Using Computers to Aid Creativity in the Early Stages of Design – or Not!: Rehabilitating the 2D/3D physical representation in Computer-Aided-Ideation
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 761-768
doi	https://doi.org/10.52842/conf.ecaade.2009.761
wos	WOS:000334282200092
summary	The introduction of Rapid Prototyping technology such as 3D printers and diverse Numerically Controlled machines such as laser cutters and milling machines, has made it obvious for many educational institutions, that a paradigm shift is occurring these years, that will forever change the design- and architectural practice, - for better or worse. This paper discusses the current change of role and status of the representation as a means to communicate design in the digital era. It outlines two opposite directions for the development of software technology, and brings forward previous and current research, on the didactic aspects of introducing digital software into the curriculum of architecture and design education. The paper describes a workshop held at the Danish Design School, where students proficient in using digital media, were challenged to use analogue models instead, to rediscover and utilize some of the creative potentials offered by this medium. Two other workshops discussing similar themes with different foci and different participants have been held since. One hosted by the Glass & Ceramic School on Bornholm, where the students are trained as traditional Craftsmen and another hosted by Nordes2009 at AHO in Oslo, where the participants came with a background in the research community. My own research interest lies in establishing or refueling a discussion on the importance of the ambiguity in a physical representation, as opposed to the finite interpretations offered by the digital modeling environment, that the profession is accustomed to work within. This interest has recently been confirmed and renewed by reading “The (soft) Architecture Machine(s)” from 1970+75 and by studying the works of Professor Julio Bermudez and Professor Bennett Neiman.
keywords	Ideation, representation, ambiguity, heuristics, design education
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaaderis2018_116
id	ecaaderis2018_116
authors	Giannopoulou, Effimia, Montás Laracuente, Nelson Bernardo and Baquero, Pablo
year	2018
title	Qualitative Study on two Kinetic System Simulations - Experiments Based on Shape Memory Material and Stepper Motors
source	Odysseas Kontovourkis (ed.), Sustainable Computational Workflows [6th eCAADe Regional International Workshop Proceedings / ISBN 9789491207143], Department of Architecture, University of Cyprus, Nicosia, Cyprus, 24-25 May 2018, pp. 95-102
keywords	This investigation intends to compare two computational design experiments operating on two kinetic architecture (Zuk and Clark 1970) design application domains: Shape-memory material (SMM) activated grids and stepper-actuated (SA) responsive skins. In the first one, the goal was to build a standard way of simulating SMM, which can be used as actuators in the construction of kinetic structures and in the second, to simulate and construct a responsive skin according to human interaction using kinect and stepper motors. In both experiments, a similar generative workflow was employed, combining insights from materials and mechanical systems. The objective is to investigate kinetic performance, kinetic design methodology, simulation implementation and applications within the two separate design domains. The general hypothesis is that both experiments become design workflows in themselves as real-time, dynamic modeling systems. A qualitatively study of both sets of cases, is taking in count general, simulation and application aspects, using evaluation criteria including workflow, material quantity, data capture and mechanical properties.
series	eCAADe
email
last changed	2018/05/29 14:33

_id	70c4
authors	Gross, M.D., Do, E.Y.-L. and Johnson, B.R.
year	2000
title	Beyond the low-hanging fruit: Information technology in architectural design past, present and future
source	W. Mitchell and J. Fernandez (eds), ACSA Technology Conference, MIT Press, Cambridge MA
summary	Today's commercial CAD software is the product of years of research that began in the 1960's and 1970's. These applications have found widespread use in the architectural marketplace; nevertheless they represent only the first fruits of research in computer aided design. New developments based on research in human-computer interaction (HCI), computer-supported collaborative work (CSCW), and virtual reality (VR) will result in a next generation of tools for architectural design. Although preliminary applications to design have been demonstrated in each of these areas, excellent opportunities remain to exploit new technologies and insights in service of better design software. In this paper we briefly examine each of these areas using examples from our own work to discuss the prospects for future research. We envision that future design technologies will develop from current and traditional conventions of practice combined with forward looking application of emerging technologies. In HCI, pen based interaction will allow architects to use the pencil again, without sacrificing the added power of computer aided design tools, and speech recognition will begin to play a role in capturing and retrieving design critique and discussion. In CSCW, a new generation of applications will address the needs of designers more closely than current general purpose meeting tools. In VR, applications are possible that use the technology not simply to provide a sense of three-dimensional presence, but that organize design information spatially, integrating it into the representation of artifacts and places.
series	other
email
last changed	2003/04/23 15:50

_id	69b3
authors	Markelin, Antero
year	1993
title	Efficiency of Model Endoscopic Simulation - An Experimental Research at the University of Stuttgart
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 31-34
summary	At the Institute of Urban Planning at the University of Stuttgart early experiments were made with the help of endoscopes in the late 1970’s. The intention was to find new instruments to visualize urban design projects. The first experiment included the use of a 16 mm film of a 1:170 scale model of the market place at Karlsruhe, including design alternatives (with trees, without trees etc). The film was shown to the Karlsruhe authorities, who had to make the decision about the alternatives. It was said, that the film gave a great help for the decision-making and a design proposition had never before been presented in such understandable way. In 1975-77, with the support of the Deutsche Forschungsgemeinschaft (German Research Foundation) an investigation was carried out into existing endoscopic simulation facilities, such as those in Wageningen, Lund and Berkeley. The resulting publication was mainly concerned with technical installations and their applications. However a key question remained: ”Can reality be simulated with endoscopy?” In 1979-82, in order to answer that question, at the Institute was carried out the most extensive research of the time, into the validity of endoscopic simulation. Of special importance was the inclusion of social scientists and psychologists from the University of Heidelberg and Mannheim. A report was produced in 1983. The research was concerned with the theory of model simulation, its ways of use and its users, and then the establishment of requirements for effective model simulation. For the main research work with models or simulation films, psychological tests were developed which enabled a tested person to give accurate responses or evidence without getting involved in alien technical terminology. It was also thought that the use of semantic differentials would make the work imprecise or arbitrary.
keywords	Architectural Endoscopy
series	EAEA
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	2010
authors	Maver, T.W.
year	1970
title	A Theory of Architectural Design in Which the Role of the Computer is Identified
source	Building Science, Vol 4, 199-207
series	journal paper
email
last changed	2003/06/02 15:00

_id	2
authors	Montagu, Arturo
year	1998
title	Desde La Computacion Grafica a los Sistemas CAD Actuales. Una Vision Historica de la Revolucion Producida en los Sistemas de Representacion Grafica (1966-1998) (From Graphical Computation to Present CAD Systems. An Historical Vision of the Revolution Produced in the Systems of Graphical Representation (1966-1998))
source	II Seminario Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings / ISBN 978-97190-0-X] Mar del Plata (Argentina) 9-11 september 1998, pp. 14-21
summary	Throughout these pages are made known the persons, the projects and the books that have influenced my actions and that they will be mentioned in form underlined in this paper. I have to emphasize that since 1965 to 1970, and in the continuous search that I was accomplishing to find data and bibliography adapted to the topic of computer graphics, only two series of publications contained topics related to this matter at that time: one was the IBM Journal and the other series was the communications of the ACM. The purpose of this work is to make known an experience accomplished throughout 30 years of intense activity in finding new methods of drawing and design, based on the use of digital computers, mainly in Argentina, and during certain periods of time in Great Britain and since 1971 during short visits to the United States and also in France. The first idea emerged in the year 1965 when I was assistant teacher at the School of Architecture of the University of Buenos Aires, as a combination of ideas between the concepts of spatial geometry and the current morphological studies that we taught in the Course of professor Gaston Breyer. However the idea of automatic drawing emerged observing the operation of the first scientific digital computer installed in the Computing Institute of the Faculty of Sciences of the University of Buenos Aires in 1963 (Sadosky 1963). At the beginning, the approach to the computer were not accomplished from a strictly scientific point of view, but it was implying a kind of "sincresis" (Koheler 1940) it is more than a synthesis, because I was tried to combine ideas that have had its origin in different worlds of thinking, the analogous world and the digital world, and this situation was very difficult to accept at that time.The designing procedures in the decade 1960's was deeply rooted (and still continues) in the architectural design field as a result of a drawing process based in heuristic techniques.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	ecaade2007_042
id	ecaade2007_042
authors	Ozel, Filiz
year	2007
title	Pattern Language and Embedded Knowledge in Building Information Modeling
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 457-464
doi	https://doi.org/10.52842/conf.ecaade.2007.457
summary	When Christopher Alexander (1977), trained both as a mathematician and an architect, published his seminal work “The Pattern Language” in the 1970’s and introduced the concept of “pattern language”, computers were still in their infancy, CAD did not exist as we know it today, and computer information modeling was not even in the radar screen of researchers. Design communication simply meant manual drafting. With the concept of ‘pattern language” (http://www.patternlanguage.com/), Alexander proposed a systematic method for dealing with complexity, which proved itself to be more relevant than ever in the digital age. The concept is often cited by computer scientists as a precursor to object oriented modeling. This study explores the potential of “pattern language” for structuring building information and design knowledge within the framework of the recent developments in building information modeling (BIM). In this article, comparisons to the approach taken by the software engineering industry who embraced the idea of “patterns” as a systematic way to software development are also made. While Alexander’s pattern language proposes a method with which the designer can incorporate his/her experiences and design vision systematically into the process of designing, software industry’s approach to patterns describes a method for providing problem and solution patterns (i.e. prototypes) that can be used repeatedly during software development. There is obviously a significant difference between the original intent of the “pattern language” and the way it was later used in other fields including software engineering and business solutions. At the cross section of architectural design and software engineering, Building Information Modeling (BIM) software can benefit from carefully incorporating a combination of these two approaches into its structure as patterns.
keywords	Building information modeling, Christopher Alexander, pattern language, software development
series	eCAADe
email
last changed	2022/06/07 08:00

_id	7134
id	7134
authors	Penttilä, Hannu (Ed.)
year	2001
title	Architectural Information Management [Conference Proceedings]
source	19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1 / Helsinki (Finland) 29-31 August 2001, 578 p.
doi	https://doi.org/10.52842/conf.ecaade.2001
summary	Several common phrases, such as “information society” or “virtual reality” point out the fact that information technology, digital tools and numerous different services via various communication networks have become crucially important factors of our western lifestyle and living environment. The trends of the society reflects naturally the working environments of the construction field, architectural discipline being amongst them. It is almost inconceivable to even imagine an architect without computer-based tools anymore. This evolutional development process has, from historical perspective, only recently started. The process is constantly evolving and rapidly increasing our possibilities to use and enjoy these modern digital fruits. The sometimes unpredictable and rapid changes in our working environment should make architects nervous about the impacts of the changes. All those delicate methods and collective traditions of the several thousand year architectural discipline(!), just simply cannot be transferred into the digital realm in a few decades. Researchers and teachers should very carefully, but still open mindedly, critically explore, analyse and adjust the so-called “modern technology” into the world of architecture, construction, design, planning – and education. We are not just “endusers”, It is we, in fact, who should define what, where and how are we willing to use it(IT). The value of information is constantly growing in our society, and in the future it will evidently be even more so. The value of information is quite hard to define with measurable or agreed concepts, but information evidently contains value-factors. The information which the architects are creating, modifying and manipulating, contains essential and valuable core data concerning the whole built environment of our society. It affects the physical surroundings of our society, in which we will be living for decades – hence, the information has a historical basis. The architectural core information also very strongly affects the quality of life of our fellow citizens – consequently, it has deep social meaning. The essentials of architectural information relies on the tradition of centuries – hence, it clearly has acknowledged cultural values, which are also extremely difficult to quantify. So how could architectural information be described? The information covers a wide range of heterogeneous concepts, items, values, methods, tools, materials, true facts, rumours, intuition and knowledge, plus a multitude of yet undefined or unpredictable factors, which still have to be watched and prepared for. Since the information deals with common and general subjects, it should also be described with common and general concepts. On the other hand as the information is also concerned with the minutiae of specific projects, the architectural information should also be described with well identified and unique entities. With our digital tools we handle all information – including architectural – more and more digitally. We have to handle and manipulate information currently as digital data, which could be understood the ”raw material” of architectural information. Digital data becomes valuable information, when some kind of meaning or purpose to somebody can be attributed to it. In the early gloomy days of ”digital architecture” in the 1960’s and 1970’s, researchers tried to describe architectural artefacts and even design process mathematically. The details of architectural information were quite difficult to describe with binary alphanumeric information of main-frame machines. The architects’ tools development then led to a trend where architects could better represent and visualize the design objects digitally. The widespread and common use of 2D-drawing and 3D-modelling tools is still a very strong trend within our discipline. In fact it is “the way” the majority of architectural information is managed today. During the last 15–20 years, so-called conceptual modelling or product data modelling, done in various technical and construction field research units worldwide, has from one viewpoint clarified the basis and essence of architectural information. Hence, it’s not only CAD-software application development, but also elementary and theoretical research that gives us valuable help to survive among the ever growing seas of terabits of data in the future to come. Architectural information is something that simply cannot be described just with DWG-drawings or dummy scanned photographs any more. Although drawings and photos may contain very important bits of architectural documentation, we need ntimes more “complexity layers”, concepts and tools to manage and understand the essence of architectural information today. A proper way to manage the data we are working with, has to cover the whole architectural discipline. The methods and tools also have to be valid and flexible for several decades in the future.
keywords	Information Management & Data Structuring, Education & Curricula, Modeling & City Planning
series	eCAADe
email
more	http://www.hut.fi/events/ecaade/
last changed	2022/06/07 07:49

_id	e1a1
authors	Rodriguez, G.
year	1996
title	REAL SCALE MODEL VS. COMPUTER GENERATED MODEL
source	Full-Scale Modeling in the Age of Virtual Reality [6th EFA-Conference Proceedings]
summary	Advances in electronic design and communication are already reshaping the way architecture is done. The development of more sophisticated and user-friendly Computer Aided Design (CAD) software and of cheaper and more powerful hardware is making computers more and more accessible to architects, planners and designers. These professionals are not only using them as a drafting tool but also as a instrument for visualization. Designers are "building" digital models of their designs and producing photo-like renderings of spaces that do not exist in the dimensional world. The problem resides in how realistic these Computer Generated Models (CGM) are. Moss & Banks (1958) considered realism “the capacity to reproduce as exactly as possible the object of study without actually using it”. He considers that realism depends on: 1)The number of elements that are reproduced; 2) The quality of those elements; 3) The similarity of replication and 4) Replication of the situation. CGM respond well to these considerations, they can be very realistic. But, are they capable of reproducing the same impressions on people as a real space? Research has debated about the problems of the mode of representation and its influence on the judgement which is made. Wools (1970), Lau (1970) and Canter, Benyon & West (1973) have demonstrated that the perception of a space is influenced by the mode of presentation. CGM are two-dimensional representations of three-dimensional space. Canter (1973) considers the three-dimensionality of the stimuli as crucial for its perception. So, can a CGM afford as much as a three-dimensional model? The “Laboratorio de Experimentacion Espacial” (LEE) has been concerned with the problem of reality of the models used by architects. We have studied the degree in which models can be used as reliable and representative of real situations analyzing the Ecological Validity of several of them, specially the Real-Scale Model (Abadi & Cavallin, 1994). This kind of model has been found to be ecologically valid to represent real space. This research has two objectives: 1) to study the Ecological Validity of a Computer Generated Model; and 2) compare it with the Ecological Validity of a Real Scale Model in representing a real space.
keywords	Model Simulation, Real Environments
series	other
type	normal paper
more	http://info.tuwien.ac.at/efa/
last changed	2004/05/04 14:42

_id	sigradi2014_172
id	sigradi2014_172
authors	Santos, Fábio Lopes Souza; Rafael Goffinet de Almeida
year	2014
title	Dan Graham e a cidade contemporânea: dispositivos espaciais, comportamentos e relações de poder
source	SiGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 505-508
summary	Dan Graham became an important reference in contemporary art developing since the 1960´s a series of works that maintain a profound relation with urban cultural phenomena. This article proposes the analysis of his works produced over the 1970´s and 1980´s which presents the use of technical supports like video, exhibition and surveillance systems and which guided his earlier aesthetic research – related to the “institutional critique” – to the investigations about the power relations between objects, public and the space where they are placed.
keywords	Dan Graham; Contemporary Art; Contemporary Architecture; Contemporary City; Contemporary Spatiality
series	SIGRADI
email
last changed	2016/03/10 09:59

_id	6c6f
authors	Shaviv, Edna
year	1984
title	National Situation Report: Technion (Haifa, Israel)
source	The Third European Conference on CAD in the Education of Architecture [eCAADe Conference Proceedings] Helsinki (Finnland) 20-22 September 1984.
doi	https://doi.org/10.52842/conf.ecaade.1984.x.j7u
summary	In Israel there is only one School of Architecture. CAAD teaching has been introduced since 1969-1970. Last year it has been decided that each department (electronical, mechanical, architectural) will have its own CAD laboratory for computer graphics, based on a super minicomputer (CDC Cyber 170/720). The following software is available for CAAD : CD2000 (wireframe drawings), ICEM (solid modelling), TIGS (terminal independent graphics system), GOAL and BIBLE, ACA (integrated CAAD software). At the Technion teachers and architects which can educate CAAD are available. The following courses are teached : Computer Aided Architectural Design (I + II), Computer Methods in City Planning, Mathematical Models in Architectural Design, Design Course - Geometrical Modelling, Design Course - Solar Energy Design Seminar. It was decided that since next year the following courses will use CAAD : Design course - Geometrical Modelling and Appraisal, Morphology I, 2D-Design and Design Course - Passive Solar Communities.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	020d
authors	Shaviv, Edna
year	1986
title	Layout Design Problems: Systematic Approaches
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 28-52
summary	The complexity of the layout design problems known as the 'spatial allocation problems' gave rise to several approaches, which can be generally classified into two main streams. The first attempts to use the computer to generate solutions of the building layout, while in the second, computers are used only to evaluate manually generated solutions. In both classes the generation or evaluation of the layout are performed systematically. Computer algorithms for 'spatial allocation problems' first appeared more than twenty-five years ago (Koopmans, 1957). From 1957 to 1970 over thirty different programs were developed for generating the floor plan layout automatically, as is summarized in CAP-Computer Architecture Program, Vol. 2 (Stewart et al., 1970). It seems that any architect who entered the area of CAAD felt that it was his responsibility to find a solution to this prime architectural problem. Most of the programs were developed for batch processing, and were run on a mainframe without any sophisticated input/output devices. It is interesting to mention that, because of the lack of these sophisticated input/output devices, early researchers used the approach of automatic generation of optimal or quasioptimal layout solution under given constraints. Gradually, we find a recession and slowdown in the development of computer programs for generation of layout solutions. With the improvement of interactive input/output devices and user interfaces, the inclination today is to develop integrated systems in which the architectural solution is obtained manually by the architect and is introduced to the computer for the appraisal of the designer's layout solution (Maver, 1977). The manmachine integrative systems could work well, but it seems that in most of the integrated systems today, and in the commercial ones in particular, there is no route to any appraisal technique of the layout problem. Without any evaluation techniques in commercial integrated systems it seems that the geometrical database exists Just to create working drawings and sometimes also perspectives.
series	CAAD Futures
email
last changed	2003/05/16 20:58

For more results click below: