Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 28

Reformat results as: short short into frame detailed detailed into frame

_id	5cf4
id	5cf4
authors	Barrionuevo, Luis F.
year	2004
title	LOS "SPIROSPACES"
source	Proceedings of the Fourth International Conference of Mathematics & Design, Special Edition of the Journal of Mathematics & Design, Volume 4, No.1, pp. 179-187.
summary	This paper deals with “Spirospaces”. These are a conversion to the third dimension of the two dimensional geometric entities called “Spirolaterals”. Abelson, Harold, diSessa and Andera (1968) gave the first rules concerning Spirolaterals. To obtain a Spirolateral from a set of straight lines, the first of them must be one unit long and the following must be incremented one unit at each step, at the same time that they turn in a constant direction. Odds (1973) establish the variation of the rotation direction, either to the left or the right. However, he did not give a mathematical relation able to calculate open Spirolaterals. Krawczyk (2001) developed a computer program that generates Spirolaterals following the method suggested by Abelson. These are Spirolaterals obtained by enumeration without a predictive mathematical formula. Krawczyc went farther proposing Spirolaterals based in curved lines. He pointed out that there are a variety of spirolateral forms that have architectural potentiality. Following this, the architectural potentiality of Spirolaterals is the basis of this paper. To take advantage of that potentiality a computer program was implemented to generate spatial configurations based in Spirolaterals. When a third dimension is given to the Spirolaterals they become Spirospaces. These new entities need spatial and design parameters to be useful for architectural purposes. Barrionuevo and Borsetti (2001) gave results about that work establishing the concept of Spirospaces. The aim of this paper is to describe a work directed to improve rules and procedures concerning Spirospaces. It is expected that these procedures governed by the proposed rules can be employed as tools during the early steps in the architectural design process. In this work some aspects concerning Spirospaces are considered. First, Spirolaterals are presented as the predecessors of Spirospaces. Second, Spirospaces are defined, together with their structural parameters. Architectural modeling is studied at the light of two special elements of the Spirospaces: Interstitial spaces and Object spaces. Next, a computer program is presented as the appropriate tool to model configurations having architectural potentiality. Finally, the results obtained running the computer program are analyzed to determine their possible use as architectural forms. Several graphic illustrations are presented showing steps going from the exploration of spatial alternatives to the selection of a specific configuration to be developed. It is expected that the described computer program could be employed as a design aid tool. As the operation of the program generates a variety of spaces able to dwell architectural objects, it eases the search of configurations suitable to specific functions. The results obtained have the possibility of being exported to computer graphic applications able to add materials, lights and cameras.
keywords	Spirolaterals, Spirospaces, architectural spaces, interstitial spaces, objectual spaces
series	other
type	normal paper
email
last changed	2005/04/07 15:34

_id	6559
authors	Barrionuevo, Luis F. and Borsetti, Ricardo
year	2001
title	LA POTENCIALIDAD ESPACIAL DE LOS "SPIROLATERALS" EN LA ARQUITECTURA (The Spacial Potential of the "Spirolaterals" in Architecture)
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 74-76
summary	“Spirolaterals” (Odds, 1973) are mathematical entities created by drawing a set of lines, the first at a unit length, then each additional line increasing by a value of certain longitude while turning a constant or variable direction. (Krawczyk, 2000) The objective of this work is to propose the use of spirolaterals as a geometric support to produce preliminary alternatives for architectural layouts. A computation program is implemented to demonstrate the automatic production of spatial spirolaterals: spirospace, and images of results are exposed.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	4489
authors	Blinn, J.F.
year	1977
title	Models of light reflection for computer synthesised pictures
source	Computer Graphics, 11 2, 192-198
summary	Bui-Tuong Phong published his illumination model in 1973, in the paper titled "Illumination for Computer-Generated Images". Phong's model is a local illumination model, which means only direct reflections are taken into account. Light that bounces off more than one surface before reaching the eye is not accounted for. While this may not be very realistic, it allows the lighting to be computed efficiently. To properly handle indirect lighting, a global illumination method such as radiosity is required, which is much more expensive. In addition to Phong's basic lighting equation, we will look at a variation invented by Jim Blinn. Blinn changed the way specular is calculated, making the computations slightly cheaper. Blinn published his approach in his paper "Models of Light Reflection for Computer Synthesised Pictures" in 1977.
series	journal paper
last changed	2003/04/23 15:14

_id	6509
authors	Blinn, J.F.
year	1978
title	Simulation of Wrinkled Surfaces
source	Computer Graphics 12 3. 286-292
summary	Computer generated shaded images have reached an impressive degree of realism with the current state of the art. They are not so realistic, however, that they would fool many people into believing they are real. One problem is that the surfaces tend to look artificial due to their extreme smoothness. What is needed is a means of simulating the surface irregularities that are on real surfaces. In 1973 Ed Catmull introduced the idea of using the parameter values of parametrically defined surfaces to index into a texture definition function which scales the intensity of the reflected light. By tying the texture pattern to the parameter values, the texture is guaranteed to rotate and move with the object. This is good for showing patterns painted on the surface, but attempts to simulate rough surfaces in this way are unconvincing. This paper presents a method of using a texturing function to perform a small perturbation on the direction of the surface normal before using it in the intensity calculations. This process yields images with realistic looking surface wrinkles without the need to model each wrinkle as a separate surface element. Several samples of images made with this technique are included.
series	journal paper
last changed	2003/04/23 15:14

_id	sigradi2004_415
id	sigradi2004_415
authors	Carmen Aroztegui
year	2004
title	The solitary confinement cell of punta de rieles: A place with stories to tell
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	Different people remember the same place differently. The question posed by my research is about how to create a visualization of a place that presents different personal recollections. My research addresses this issue through a case study: the visualization of a women.s political prison, located in Punta de Rieles, Uruguay, during the Uruguayan dictatorship (1973-85). The visualization will be based on the memories recounted by these women. My research will result in a written report and an audiovisual installation. The installation will provide an immersive experience centered on the solitary confinement cell. The implementation suggests changes in lighting in the solitary confinement cell as the main formal expression of the variations in the women.s testimonies.
keywords	Visualization, subjectivity, memories, immersion, prison
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	6b90
authors	Elson, Mark
year	1973
title	Concepts of Programming Languages
source	xii, 333 p. : ill. Chicago: Science Research Associates, Inc., 1973
summary	Includes bibliography: p. [317]-325 -- (The SRA Computer Science Series). The primary purpose is of this paper is to study the important structural characteristic of various prominent high-level languages. The first part provides a brief, informal introduction to a cross-section of prominent languages that are latter drawn upon for illustration. The second and third parts provide an analysis of language features. They differ from each other in the degree of generality of the concepts discussed. The appendices provide ancillary information ranging from elementary automata theory to language-syntax description to compilation techniques
keywords	programming, languages, theory, practice
series	CADline
last changed	1999/02/12 15:08

_id	ga0024
id	ga0024
authors	Ferrara, Paolo and Foglia, Gabriele
year	2000
title	TEAnO or the computer assisted generation of manufactured aesthetic goods seen as a constrained flux of technological unconsciousness
source	International Conference on Generative Art
summary	TEAnO (Telematica, Elettronica, Analisi nell'Opificio) was born in Florence, in 1991, at the age of 8, being the direct consequence of years of attempts by a group of computer science professionals to use the digital computers technology to find a sustainable match among creation, generation (or re-creation) and recreation, the three basic keywords underlying the concept of “Littérature potentielle” deployed by Oulipo in France and Oplepo in Italy (see “La Littérature potentielle (Créations Re-créations Récréations) published in France by Gallimard in 1973). During the last decade, TEAnO has been involving in the generation of “artistic goods” in aesthetic domains such as literature, music, theatre and painting. In all those artefacts in the computer plays a twofold role: it is often a tool to generate the good (e.g. an editor to compose palindrome sonnets of to generate antonymic music) and, sometimes it is the medium that makes the fruition of the good possible (e.g. the generator of passages of definition literature). In that sense such artefacts can actually be considered as “manufactured” goods. A great part of such creation and re-creation work has been based upon a rather small number of generation constraints borrowed from Oulipo, deeply stressed by the use of the digital computer massive combinatory power: S+n, edge extraction, phonetic manipulation, re-writing of well known masterpieces, random generation of plots, etc. Regardless this apparently simple underlying generation mechanisms, the systematic use of computer based tools, as weel the analysis of the produced results, has been the way to highlight two findings which can significantly affect the practice of computer based generation of aesthetic goods: ? the deep structure of an aesthetic work persists even through the more “desctructive” manipulations, (such as the antonymic transformation of the melody and lyrics of a music work) and become evident as a sort of profound, earliest and distinctive constraint; ? the intensive flux of computer generated “raw” material seems to confirm and to bring to our attention the existence of what Walter Benjamin indicated as the different way in which the nature talk to a camera and to our eye, and Franco Vaccari called “technological unconsciousness”. Essential references R. Campagnoli, Y. Hersant, “Oulipo La letteratura potenziale (Creazioni Ri-creazioni Ricreazioni)”, 1985 R. Campagnoli “Oupiliana”, 1995 TEAnO, “Quaderno n. 2 Antologia di letteratura potenziale”, 1996 W. Benjiamin, “Das Kunstwerk im Zeitalter seiner technischen Reprodizierbarkeit”, 1936 F. Vaccari, “Fotografia e inconscio tecnologico”, 1994
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	a4d9
authors	Foerster, H.
year	1973
title	On Constructing a Reality
source	Preiser, F, Environmental Design Research Stroudberg. Dowden, Hutchinson and Ross
summary	I first met Heinz von Foerster on a visit to his home at One Eden West Rd. near Pescadero, California, in the fall of 1997. I was in the company of Frank Galuzska, my professor at the time, and two other students - the four of us constituting an experimental course in design theory at the University of California, Santa Cruz that was my introduction to cybernetics and design. As part of that course, Frank had assigned "On Constructing A Reality" and I was eager to make my acquaintance with the man behind those words.
series	other
last changed	2003/04/23 15:50

_id	85c8
authors	Gill, Robert W.
year	1973
title	The Thames and Hudson Manual of Rendering With Pen and Ink
source	368 p. : ill. London: Thames and Hudson Ltd., 1973. includes bibliography and index
summary	Rendering is the reproduction of an architect`s design in the form of a drawing of a building as it will appear. This is a guide to techniques and methods. Including section on perspective, projection, shadow reflection, instrument and equipment and so on
keywords	rendering, architecture
series	CADline
last changed	2003/06/02 10:24

_id	06e1
authors	Keul, Alexander
year	1996
title	LOST IN SPACE? ARCHITECTURAL PSYCHOLOGY - PAST, PRESENT, FUTURE
source	Full-Scale Modeling in the Age of Virtual Reality [6th EFA-Conference Proceedings]
summary	A methodological review by Kaminski (1995) summed up five perspectives in environmental psychology - patterns of spatial distribution, everyday “jigsaw puzzles”, functional everyday action systems, sociocultural change and evolution of competence. Architectural psychology (named so at the Strathclyde conference 1969; Canter, 1973) as psychology of built environments is one leg of environmental psychology, the second one being psychology of environmental protection. Architectural psychology has come of age and passed its 25th birthday. Thus, a triangulation of its position, especially in Central Europe, seems interesting and necessary. A recent survey mainly on university projects in German-speaking countries (Kruse & Trimpin, 1995) found a marked decrease of studies in psychology of built environments. 1994, 25% of all projects were reported in this category, which in 1975 had made up 40% (Kruse, 1975). Guenther, in an unpublished survey of BDP (association of professional German psychologists) members, encountered only a handful active in architectural psychology - mostly part-time, not full-time. 1996, Austria has two full-time university specialists. The discrepancy between the general interest displayed by planners and a still low institutionalization is noticeable. How is the research situation? Using several standard research data banks, the author collected articles and book(chapter)s on architectural psychology in German- and English-language countries from 1990 to 1996. Studies on main architecture-psychology interface problems such as user needs, housing quality evaluations, participatory planning and spatial simulation / virtual reality did not outline an “old, settled” discipline, but rather the sketchy, random surface of a field “always starting anew”. E.g., discussions at the 1995 EAEA-Conference showed that several architectural simulation studies since 1973 caused no major impact on planner's opinions (Keul&Martens, 1996). “Re-inventions of the wheel” are caused by a lack of meetings (except this one!) and of interdisciplinary infrastructure in German-language countries (contrary to Sweden or the United States). Social pressures building up on architecture nowadays by inter-European competition, budget cuts and citizen activities for informed consent in most urban projects are a new challenge for planners to cooperate efficiently with social scientists. At Salzburg, the author currently manages the Corporate Design-process for the Chamber of Architecture, Division for Upper Austria and Salzburg. A “working group for architectural psychology” (Keul-Martens-Maderthaner) has been active since 1994.
keywords	Model Simulation, Real Environments
series	EAEA
type	normal paper
email
more	http://info.tuwien.ac.at/efa/
last changed	2005/09/09 10:43

_id	ef80
authors	Knuth, Donald E.
year	1973
title	Fundamental Algorithms
source	The Art of Computer Programming. 2nd. ed. 634 p. : some ill. Addison- Wesley Series in Computer Science and Information Processing Reading, Mass.: Addison Wesley Pub. Co., 1973. vol.1: includes index.
summary	-- This vol. is part of 7 vol. set. CADLINE has vol.1 and 3. Introduces basic concept in algorithms and information structure with exercises. Requires some knowledge in programming, techniques and computer jargon
keywords	algorithms, education, data structures
series	CADline
last changed	2003/06/02 10:24

_id	2954
authors	Knuth, Donald E.
year	1973
title	Sorting and Searching
source	The Art of Computer Programming. 722 p. : tables, diagrams Computer Science and Information Processing . Reading, Mass.: Addison- Wesley Pub. Co., 1973. vol.3: part of 7 vol. set. CADLINE has vol. 1 and 3
summary	Chapter 5 is concerned with sorting into order, internal sorting and external sorting. Chapter 6 deals with the problem of searching for specified items in tables or files. It is subdivided into methods which search sequentially, or by comparison of keys, or by digital properties, or by 'hashing.' It then discusses the more difficult problem of secondary key retrieval
keywords	sorting, search, algorithms, education
series	CADline
last changed	2003/06/02 13:58

_id	88d7
authors	Kulcke, Richard
year	1995
title	CAAD in the Architectural Education of the Fachhochschulen in Germany
source	CAD Space [Proceedings of the III International Conference Computer in Architectural Design] Bialystock 27-29 April 1995, pp. 7-13
summary	Like the most teachers of Computer Aided Architectural Design at the Fachhochschulen I am an architect not a computer specialist. I studied architecture in the sixties at the universities of Stuttgart and Berlin, In 1973 I became a lecturer at the Fachhochschule Nordostniedersachsen. My subjects are building economics, urban planning and computer aided architectural design (CAAD). My report wants to show what is going on at the Fachhochschulen. This report is based on the paper presented at the eCAADe conference 1989 in Aarhus, Denmark
series	plCAD
last changed	2000/01/24 10:08

_id	7e15
authors	Kvan, Thomas
year	1997
title	Chips, chunks and sauces
source	International Journal of Design Computing, 1, 1997 (Editorial)
summary	I am sure there is an art in balancing the chunks to use with your chips. Then there is the sauce that envelops them both. I like my chips chunky and not too saucy. Not that I am obsessed with food but I don't think you can consider design computing without chunks. It's the sauce I'm not sure about.The chunks of which I write are not of course those in your salsa picante but those postulated by Chase and Simon (1973) reflecting on good chess players; the chunks of knowledge with which an expert tackles a problem in their domain of expertise. The more knowledge an expert has of complex and large configurations of typical problem situations (configurations of chess pieces), the greater range of solutions the expert can bring a wider to a particular problem. Those with more chunks have more options and arrive at better solutions. In other words, good designs come from having plenty of big chunks available. There has been a wealth of research in the field of computer-supported collaborative work in the contexts of writing, office management, software design and policy bodies. It is typically divided between systems which support decision making (GDSS: group decision support systems) and those which facilitate joint work (CSCW: computer-based systems for co-operative work) (see Dennis et al. (1988) for a discussion of the distinctions and their likely convergence). Most implementations in the world of design have been on CSCW systems, few have looked at trying to make a group design decision support system (GDDSS?). Most of the work in CSCD has been grounded in the heritage of situated cognition - the assumption that collaborative design is an act that is intrinsically grounded in the context within which it is carried out, that is, the sauce in which we find ourselves swimming daily. By sauce, therefore, I am referring to anything that is not knowledge in the domain of expertise, such as modes of interaction, gestures, social behaviours.
series	journal paper
email
last changed	2003/05/15 10:29

_id	fbe6
authors	Lee, D. B.
year	1973
title	Requiem for Large-Scale Models
source	Journal of the American Institute of Planners 39, pp. 163-178
summary	Contributed by Susan Pietsch (spietsch@arch.adelaide.edu.au)
keywords	3D City Modeling, Development Control, Design Control
series	journal paper
last changed	2003/05/15 21:45

_id	2ee6
authors	Lee, D.B.
year	1973
title	Requiem for Large-Scale Models
source	Journal of the American Institute of Planners, 39, pp. 163-178
summary	In his classic article, "Requiem for Large-Scale Models," Douglass Lee attributed their limited success to their data-hungriness and a complexity that defied understanding by would-be users.
series	journal paper
last changed	2003/04/23 15:14

_id	sigradi2009_748
id	sigradi2009_748
authors	Leite, Denivaldo Pereira; Rafael Cunha Perrone
year	2009
title	Inventory of Modern Arquitecture Virtual Reconstruction of Public Buildings at Santo André, São Bernardo do Campo e São Caetano do Sul [Inventory of Modern Architecture: Virtual reconstruction of public buildings at Santo André, São Bernardo do Campo e São Caetano do Sul (1960 – 1973)]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	The object of this research, is identify and quantify the Public Architecture of some cities near form the city of São Paulo (Santo André, São Bernardo do Campo e São Caetano do Sul), during the years of 1960 till 1973. This research looks to realize a documental reference for new researchs, and to help in process of preservation, and the most important, give a new value to the buildings studied in this work. In the case and period studied, the documentatin is very important, because shows, in general lines, a production that is part of what is called “Arquitetura Brutalista Paulista”.
keywords	virtual reconstruction; Modern Arquitecture; ABC paulista region
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	ijac20053302
id	ijac20053302
authors	Massera, Carmen Aroztegui
year	2005
title	The Calabozo:Virtual Reconstruction of a Place Based on Testimonies
source	International Journal of Architectural Computing vol. 3 - no. 3, 281-298
summary	The objective the research reported here is to create a visualization of a place based on personal experiences. My research addresses this issue through a case study: the visualization of a women's political prison during the Uruguayan military dictatorship (1973–85). The proposed visualization is based on these women's personal experiences of the solitary confinement cell (calabozo). Compared with their male counterpart, women's memories about prison have been traditionally relegated to a second level in Uruguay. The visualization aims to communicate these women's experiences of the calabozo through a video installation. This article first reviews relevant precedents to the case study and to virtual reconstructions and later describes the video installation.
series	journal
more	http://www.ingentaconnect.com/search/expand?pub=infobike://mscp/ijac/2005/00000003/00000003/art00003
last changed	2007/03/04 07:08

_id	c7e9
authors	Maver, T.W.
year	2002
title	Predicting the Past, Remembering the Future
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 2-3
summary	Charlas Magistrales 2There never has been such an exciting moment in time in the extraordinary 30 year history of our subject area, as NOW,when the philosophical theoretical and practical issues of virtuality are taking centre stage.The PastThere have, of course, been other defining moments during these exciting 30 years:• the first algorithms for generating building layouts (circa 1965).• the first use of Computer graphics for building appraisal (circa 1966).• the first integrated package for building performance appraisal (circa 1972).• the first computer generated perspective drawings (circa 1973).• the first robust drafting systems (circa 1975).• the first dynamic energy models (circa 1982).• the first photorealistic colour imaging (circa 1986).• the first animations (circa 1988)• the first multimedia systems (circa 1995), and• the first convincing demonstrations of virtual reality (circa 1996).Whereas the CAAD community has been hugely inventive in the development of ICT applications to building design, it hasbeen woefully remiss in its attempts to evaluate the contribution of those developments to the quality of the built environmentor to the efficiency of the design process. In the absence of any real evidence, one can only conjecture regarding the realbenefits which fall, it is suggested, under the following headings:• Verisimilitude: The extraordinary quality of still and animated images of the formal qualities of the interiors and exteriorsof individual buildings and of whole neighborhoods must surely give great comfort to practitioners and their clients thatwhat is intended, formally, is what will be delivered, i.e. WYSIWYG - what you see is what you get.• Sustainability: The power of «first-principle» models of the dynamic energetic behaviour of buildings in response tochanging diurnal and seasonal conditions has the potential to save millions of dollars and dramatically to reduce thedamaging environmental pollution created by badly designed and managed buildings.• Productivity: CAD is now a multi-billion dollar business which offers design decision support systems which operate,effectively, across continents, time-zones, professions and companies.• Communication: Multi-media technology - cheap to deliver but high in value - is changing the way in which we canexplain and understand the past and, envisage and anticipate the future; virtual past and virtual future!MacromyopiaThe late John Lansdown offered the view, in his wonderfully prophetic way, that ...”the future will be just like the past, onlymore so...”So what can we expect the extraordinary trajectory of our subject area to be?To have any chance of being accurate we have to have an understanding of the phenomenon of macromyopia: thephenomenon exhibitted by society of greatly exaggerating the immediate short-term impact of new technologies (particularlythe information technologies) but, more importantly, seriously underestimating their sustained long-term impacts - socially,economically and intellectually . Examples of flawed predictions regarding the the future application of information technologiesinclude:• The British Government in 1880 declined to support the idea of a national telephonic system, backed by the argumentthat there were sufficient small boys in the countryside to run with messages.• Alexander Bell was modest enough to say that: «I am not boasting or exaggerating but I believe, one day, there will bea telephone in every American city».• Tom Watson, in 1943 said: «I think there is a world market for about 5 computers».• In 1977, Ken Olssop of Digital said: «There is no reason for any individuals to have a computer in their home».The FutureJust as the ascent of woman/man-kind can be attributed to her/his capacity to discover amplifiers of the modest humancapability, so we shall discover how best to exploit our most important amplifier - that of the intellect. The more we know themore we can figure; the more we can figure the more we understand; the more we understand the more we can appraise;the more we can appraise the more we can decide; the more we can decide the more we can act; the more we can act themore we can shape; and the more we can shape, the better the chance that we can leave for future generations a trulysustainable built environment which is fit-for-purpose, cost-beneficial, environmentally friendly and culturally significactCentral to this aspiration will be our understanding of the relationship between real and virtual worlds and how to moveeffortlessly between them. We need to be able to design, from within the virtual world, environments which may be real ormay remain virtual or, perhaps, be part real and part virtual.What is certain is that the next 30 years will be every bit as exciting and challenging as the first 30 years.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	b7c1
authors	Maver, T.W.
year	1973
title	The Architecture and Building Aids Computer Unit
source	Computer Aided Design, vol Vol 5, No 2, 109-110
series	journal paper
type	normal paper
email
last changed	2015/02/20 11:26

For more results click below: