Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 49

Reformat results as: short short into frame detailed detailed into frame

_id	a8ca
authors	Courtieux, Gerard
year	1981
title	Man Machine Interface Problems in Computer Aided Architectural Design
source	1981. pp. 231-250 : ill. includes bibliography. -- discussion (pp. 247-250)
summary	The author and two other researchers conducted a world-wide survey of existing computer aided architectural design programs in 1978. The purpose of the survey was to validate an earlier study of the architectural design process and to investigate problem areas in Computer Aided Architectural Design (CAAD). The survey indicated that two problems of man machine interaction in CAAD, though partly solved, remain a challenge for computer scientists: the description and graphical representation of three-dimensional objects. The formalization of the information collected in the survey, together with the experience of the author in teaching computer graphics to architecture students for the past ten years, is used to give some insight in these two problems and to make some recommendations for the improvement of the man machine interface in CAAD
keywords	architecture, CAD, user interface
series	CADline
last changed	1999/02/12 15:07

_id	6387
authors	Akin, Omer
year	1978
title	How do Architects Design?
source	Artificial Intelligence and Pattern Recognition in Computer Aided Design. North-Holland Publishing Company, 1978. pp. 65-98. includes bibliography
summary	This study is proposes a descriptive model of the design behavior of architects. In the first section a framework for the model is proposed. In the second section the framework is tested against empirical data. 11 information processing mechanisms are observed in the data. Eight of these: information acquisition, problem interpretation, problem representation, solution generation, solution integration, solution evaluation, perception and sketching, are used in developing design solutions. The three remaining mechanisms: design 'plans,' transformation rules and design-symbols, represent the categories of the priori knowledge used in design. In the third section these three knowledge mechanisms are explored in detail using the results of two additional experiments with designers
keywords	design methods, architecture, design process
series	CADline
email
last changed	2003/05/17 10:09

_id	629c
authors	Ball, A. A.
year	1978
title	A Simple Specification of the Parametric Cubic Segment
source	computer Aided Design. Business Press, May, 1978. vol. 10: pp. 181-182
summary	A parametric cubic segment may be specified in many ways but most specifications require quantities peculiar to the parametric representation rather than the geometric properties of the curve segment. This paper shows that a three- dimensional cubic segment is specified completely by its end points, end slopes and one intermediate point
keywords	parametrization, curves, curved surfaces, representation
series	CADline
last changed	2003/06/02 10:24

_id	0fd5
authors	Borkin, Harold J., McIntosh, John F. and Turner, James A.
year	1978
title	The Development of Three-Dimensional Spatial Modeling Techniques for the Construction of Nuclear Power Plants
source	SIGGRAPH-ACM Quarterly Report. August, 1978. pp. 26-30 : ill. includes bibliography
summary	This paper presents the results of the first phase of a research project on the application of spatial modeling techniques to the process of planning and executing the construction of a nuclear power plant. A computer modeling technique, based on sets of polyhedra and spatial set operations, was developed and applied to modeling the components of a nuclear power plant. The objectives of the modeling are: To store and retrieve information about the various systems in the facility; to produce drawings of those systems from any angle in differing amounts of detail; to aid in the search for interference among the parts of the plant by identifying those elements that occupy the same space or are too close to each other; to calculate information such as surface area, length, and volume of selected elements of the plant; and to aid in finding the optimum construction sequence by simulating the construction of selected areas of the plant. Computer techniques are described for inputing information by digitizing directly from engineering drawings, for editing the spatial model, for management of the spatial and non-spatial data, and for graphic output from the model. The software is implemented on the University central time- sharing computer system and on a mini-computer system in the Architectural Research Laboratory
keywords	geometric modeling, polyhedra, relational database, construction, synthesis, evaluation, design, applications
series	CADline
last changed	2003/06/02 13:58

_id	0bd5
authors	Dube, R., Herron, G.J. and Little, F.F. (et al)
year	1978
title	SURFED -- An Interactive Editor for Free-Form Surfaces
source	Computer Aided Design. March, 1978. vol. 10: pp. 111-115 : ill. includes bibliography
summary	An editor is described for creating and modifying free-form surfaces. A modular system was developed in order to provide the researchers with a facility for communicating design ideas and new mathematical forms through an interactive graphical interface to a computer based model. To achieve this it was necessary to invent a new graphical construct called a `spider' for inputing three-dimensional parameters. This experimental system has the essential features of a large- scale implementation, with the capability of utilizing many new surface forms that have not yet been tried in actual applications
keywords	curved surfaces, computer graphics, user interface
series	CADline
last changed	2003/06/02 13:58

_id	0354
authors	Goodman, Gary and Reddy, Raj D.
year	1978
title	Alternative Control Structures for Speech Understanding Systems
source	1978 ? [13] p. : ill. includes bibliography Control structures are an essential part of any speech recognition system. They are the devices by which passive knowledge about the task and language is transformed into active and effective processes. In the chapter, three areas of control structures are defined and discussed: knowledge source interaction, knowledge source activation, and knowledge source focusing. Discussion relates the concepts presented to systems developed during the five-year ARPA speech understanding project. speech recognition / systems / control / structures / AI. 64. Goodman, Tim and Keith Unsworth. 'Manipulating Shape and Producing Geometric Continuity in B-spline Curves.' IEEE Computer Graphics and Applications. February, 1986. vol. 6: pp. 50-56 : ill. includes bibliography.
summary	This article examines some of the desirable features of B- splines that make them particularly suitable for computer- aided design. First, a theoretical analysis is presented regarding the effects upon the shape of a design curve when the bias and tension parameters are allowed to vary in certain ways. Second, the concept of geometric continuity is discussed, and conditions are derived upon the control vertices to ensure that the design curve has second-order geometric continuity. Illustrations of B-spline curves are presented to support the theoretical conclusions
keywords	computational geometry, B-splines, curves, CAD
series	CADline
last changed	2003/06/02 13:58

_id	634c
authors	Joblove, G.H. and Greenberg, D.
year	1978
title	Color spaces for computer graphics
source	Computer Graphics, vol. 12, pp. 20-25, August 1978
summary	Normal human color perception is a product of three independent sensory systems. By mirroring this mechanism, full-color display devices create colors as mixtures of three primaries. Any displayable color can be described by the corresponding values of these primaries. Frequently it is more convenient to define various other color spaces, or coordinate systems, for color representation or manipulation. Several such color spaces are presented which are suitable for applications involving user specification of color, along with the defining equations and illustrations. The use of special color spaces for particular kinds of color computations is discussed.
series	journal paper
last changed	2003/04/23 15:50

_id	898a
authors	Bay, J.H.
year	2002
title	Cognitive Biases and Precedent Knowledge in Human and Computer-Aided Design Thinking
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 213-220
doi	https://doi.org/10.52842/conf.caadria.2002.213
summary	Cognitive biases (illusions) and potential errors can occur when using precedent knowledge for analogical, pre-parametric and qualitative design thinking. This paper refers largely to part of a completed research (Bay 2001) on how heuristic biases, discussed by Tversky and Kahneman (1982) in cognitive psychology, can affect judgement and learning of facts from precedents in architectural design, made explicit using a kernel of conceptual system (Tzonis et. al., 1978) and a framework of architectural representation (Tzonis 1992). These are used here to consider how such illusions and errors may be transferred to computer aided design thinking.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	e1e8
authors	Bezier, Pierre E.
year	1978
title	General Distortion of an Ensemble of Biparametric Surfaces
source	computer Aided Design. March, 1978. vol. 10: pp. 116-120 : ill. includes bibliography
summary	When the shape of an object has been numerically defined, it is sometimes necessary to distort it to improve either its technical performance or its aesthetic appearance. After briefly recalling the major properties of space curves and surfaces defined by Bernstein polynomials, it is shown how the result can be automatically obtained by distorting an auxiliary triparametric set of references. The principle of an approximate method for high-order curves and surfaces is explained
keywords	curves, curved surfaces, Bernstein, representation, Bezier, computational geometry
series	CADline
last changed	2003/06/02 13:58

_id	cf2011_p051
id	cf2011_p051
authors	Cote, Pierre; Mohamed-Ahmed Ashraf, Tremblay Sebastien
year	2011
title	A Quantitative Method to Compare the Impact of Design Mediums on the Architectural Ideation Process.
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 539-556.
summary	If we compare the architectural design process to a black box system, we can assume that we now know quite well both inputs and outputs of the system. Indeed, everything about the early project either feasibility studies, programming, context integration, site analysis (urban, rural or natural), as well as the integration of participants in a collaborative process can all be considered to initiate and sustain the architectural design and ideation process. Similarly, outputs from that process are also, and to some extent, well known and identifiable. We are referring here, among others, to the project representations or even to the concrete building construction and its post-evaluation. But what about the black box itself that produces the ideation. This is the question that attempts to answer the research. Currently, very few research works linger to identify how the human brain accomplishes those tasks; how to identify the cognitive functions that are playing this role; to what extent they operate and complement each other, and among other things, whether there possibly a chain of causality between these functions. Therefore, this study proposes to define a model that reflects the activity of the black box based on the cognitive activity of the human brain. From an extensive literature review, two cognitive functions have been identified and are investigated to account for some of the complex cognitive activity that occurs during a design process, namely the mental workload and mental imagery. These two variables are measured quantitatively in the context of real design task. Essentially, the mental load is measured using a Bakan's test and the mental imagery with eyes tracking. The statistical software G-Power was used to identify the necessary subject number to obtain for significant variance and correlation result analysis. Thus, in the context of an exploratory research, to ensure effective sample of 0.25 and a statistical power of 0.80, 32 participants are needed. All these participants are students from 3rd, 4th or 5th grade in architecture. They are also very familiar with the architectural design process and the design mediums used, i.e., analog model, freehand drawing and CAD software, SketchUp. In three experimental sessions, participants were asked to design three different projects, namely, a bus shelter, a recycling station and a public toilet. These projects were selected and defined for their complexity similarity, taking into account the available time of 22 minutes, using all three mediums of design, and this in a randomly manner to avoid the order effect. To analyze the two cognitive functions (mental load and mental imagery), two instruments are used. Mental imagery is measured using eye movement tracking with monitoring and quantitative analysis of scan paths and the resulting number and duration of participant eye fixations (Johansson et al, 2005). The mental workload is measured using the performance of a modality hearing secondary task inspired by Bakan'sworks (Bakan et al.; 1963). Each of these three experimental sessions, lasting 90 minutes, was composed of two phases: 1. After calibrating the glasses for eye movement, the subject had to exercise freely for 3 minutes while wearing the glasses and headphones (Bakan task) to get use to the wearing hardware. Then, after reading the guidelines and criteria for the design project (¬± 5 minutes), he had 22 minutes to execute the design task on a drawing table allowing an upright posture. Once the task is completed, the subject had to take the NASA TLX Test, on the assessment of mental load (¬± 5 minutes) and a written post-experimental questionnaire on his impressions of the experiment (¬± 10 minutes). 2. After a break of 5-10 minutes, the participant answered a psychometric test, which is different for each session. These tests (¬± 20 minutes) are administered in the same order to each participant. Thus, in the first experimental session, the subject had to take the psychometric test from Ekstrom et al. (1978), on spatial performance (Factor-Referenced Cognitive Tests Kit). During the second session, the cognitive style is evaluated using Oltman's test (1971). Finally, in the third and final session, participant creativity is evaluated using Delis-Kaplan test (D-KEFS), Delis et al. (2001). Thus, this study will present the first results of quantitative measures to establish and validate the proposed model. Furthermore, the paper will also discuss the relevance of the proposed approach, considering that currently teaching of ideation in ours schools of architecture in North America is essentially done in a holistic manner through the architectural project.
keywords	design, ideation process, mental workload, mental imagery, quantitative mesure
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	2b4b
authors	Giloi, Wolfgang K.
year	1978
title	Interactive Computer Graphics : Data Structure, Algorithms, Languages
source	xiii, 354 p. : ill
summary	Englewood Cliffs, New Jersey: Prentice-Hall, Inc., 1978. includes bibliography: p. 320-329 and indexes. Part 1 is devoted to data structures and algorithms: an introduction to the subject and chapters on data structure, data bases, and list handling; picture structure and picture transformations; interpolation of curves and surfaces; and rendering of surfaces and solids. Part 2 emphasizes languages and their interpreters: interactive handling, the display processor, display file and picture file organization, language concepts for interactive computer graphics, and high level language implementation of display programming systems
keywords	computer graphics, algorithms, data structures, languages, database, transformation, curves, curved surfaces, solids, user interface
series	CADline
last changed	2003/06/02 13:58

_id	4697
authors	Griffiths, J.G.
year	1978
title	A Surface Display Algorithm
source	Computer Aided Design. January, 1978. vol. 10: pp. 65-73 : ill. includes bibliography
summary	An algorithm is described for displaying curved surfaces with their hidden parts removed. The algorithm calculates a number of points on a surface at which the surface disappears from view, and joins the points to form a piece-wise smooth `critical boundary'. With a knowledge of this critical boundary, the task of displaying the visible parts of the surface becomes simple
keywords	algorithms, curved surfaces, representation, display, hidden lines, hidden surfaces, computer graphics
series	CADline
last changed	2003/06/02 13:58

_id	c06a
authors	Shaviv, Edna
year	1978
title	The Determination of the Form of Windows and Sunshades in a Hot Climate - A Case Study
source	CAD 78 proceedings. 1978. IPC Science & Tech. Press, pp. 11-120 : ill. and tables. includes bibliography: pp. 115
summary	Architectural Sciences and Design Methods Working Paper ASDM- 13 A method for the design of fixed external sunshades was developed, using a computer for calculating the exact geometry and a plotter for presentation. The method is applied to the design of the elevations of a hospital building under construction in Haifa, Israel. The emphasis is on finding the form of the correct shape of windows and the necessary sunshades so as to avoid penetration of direct sun during the summer. The method preserves the freedom of the architect and provides reasonable structures and pleasing elevations
keywords	architecture, shading, energy, evaluation, synthesis, analysis, methods, tools, algorithms, applications
series	CADline
email
last changed	2003/05/17 10:20

_id	2612
authors	Flemming, Ulrich
year	1978
title	Wall Representations of Rectangular Dissections and Their Use in Automated Space Allocation
source	Environment and Planning B. 1978. vol. 5: pp. 215-232 : ill. includes bibliography
summary	A procedure is described which generates dissections of rectangles into rectangular components in order to obtain solutions to space-allocation problems which are restricted through topological and dimensional constraints. Solutions are generated in two steps: step 1 determines basic geometric properties of the arrangements to be produced, and step 2 computes the dimensions of the spaces in such an arrangement. Both steps are based on `wall representations' of the solutions. These representations allow geometric relations and operations to be transformed into relations and operations defined on character strings. They furthermore allow the (possibly infinite) set of solutions to be systematically searched for a finite set of `principal options'. The importance linear-programming techniques for step 2 is described
keywords	space allocation, linear programming, representation, CAD, design,automation, layout, synthesis
series	CADline
email
last changed	2003/02/26 17:24

_id	20c1
authors	Alavalkama, Ilkka
year	1993
title	Technical Aspects of the Urban Simulator in Tampere University of Technology
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 35-46
summary	The colour video recording Urban Simulator in TUT was built very early compared with the development of video systems. A contract for planning the simulator electronics, mechanics and camera systems was made in january 1978 with two TUT students: Jani Granholm (computer science and engineering) and Ilkka Alavalkama (machine design and automation). Ease of control and maintenance were asked by side of ”human movement inside coloured small-scale architectural models”. From the beginning, all components of the system were carefully tested and chosen from various alternatives. Financial resources were quite limited, which lead to a long building process and to self-planned and produced mechanical and electronical elements. Some optical systems were constructed by using elements from various manufacturers.
keywords	Architectural Endoscopy
series	EAEA
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	6509
authors	Blinn, J.F.
year	1978
title	Simulation of Wrinkled Surfaces
source	Computer Graphics 12 3. 286-292
summary	Computer generated shaded images have reached an impressive degree of realism with the current state of the art. They are not so realistic, however, that they would fool many people into believing they are real. One problem is that the surfaces tend to look artificial due to their extreme smoothness. What is needed is a means of simulating the surface irregularities that are on real surfaces. In 1973 Ed Catmull introduced the idea of using the parameter values of parametrically defined surfaces to index into a texture definition function which scales the intensity of the reflected light. By tying the texture pattern to the parameter values, the texture is guaranteed to rotate and move with the object. This is good for showing patterns painted on the surface, but attempts to simulate rough surfaces in this way are unconvincing. This paper presents a method of using a texturing function to perform a small perturbation on the direction of the surface normal before using it in the intensity calculations. This process yields images with realistic looking surface wrinkles without the need to model each wrinkle as a separate surface element. Several samples of images made with this technique are included.
series	journal paper
last changed	2003/04/23 15:14

_id	471f
authors	Brooks, Frederick P. Jr.
year	1987
title	Essence and Accidents of Software Engineering
source	IEEE Computer. April, 1987. vol. 20: pp. 10-19 : ill. includes bibliography. -- See also Information Processing '86 edited by H.J. Kugler; and Brooks, F.P. 'The Mythical Man-Month,' Addison-Wesley, 1978
summary	The author analyzed the nature and the problems of software engineering and assessed the technical developments that are most often advanced as potential solutions for the problems
keywords	software, programming, languages, management
series	CADline
last changed	2003/06/02 10:24

_id	35a7
authors	Brown, André G.P.
year	2001
title	Architectural critique through digital scenariobuilding. Augmenting Architectural Criticism and Narrative
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 697-709
summary	As an idea scenario-building has parallels the use of creative faking in related disciplines, most particularly, in contemporary art. The techniques involved in scenario-building and faking offer us enhanced ways of undertaking creative thinking and critical review of architecture and architectural projects. Critical review and theoretical analysis of architecture can be undertaken via a range of methods that Attoe (1978) classifies as Normative, Interpretive and Descriptive. Digital representation now offers us new ways of augmenting these critical styles in ways that have yet to be fully exploited, and possible means of exploitation are illustrated in this paper. In short the work described here shows how digital techniques can be used to enrich architectural investigation, critical reporting and debate.
keywords	Digital Recreation, Scenario-Building, Narrative, Fake, Architectural Critique
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	4df6
authors	Cohen, Elaine and Riesenfeld, Richard F.
year	1978
title	An Incompatibility Projector Based on an Interpolant of Gregory
source	computer Graphics and Image Processing. 1978. vol. 8: pp. 294-298. includes bibliography
summary	This paper develops an 'incompatibility Projector' Qm, which is an intrinsically bivariate projector that is not the composition of two univariate projectors. Then it employs Qm to manifest a recent rational interpolant due to Gregory in projector form as a triple Boolean sum. This creates a mold for additional compatibility projectors which yield interpolants to functions that do not meet the ordinary compatibility constraints required for Boolean sum interpolation
keywords	algorithms, computational geometry, curves, curved surfaces, mathematics, theory
series	CADline
last changed	2003/06/02 10:24

_id	ea3c
authors	Hillyard, R. and Braid, I.
year	1978
title	Analysis of dimensions and tolerances in computer-aided mechanical design
source	Computer Aided Design, vol.10, n.3, may 1978, pp. 161-166
summary	The paper sets forth a theory to explain how dimensions and views combine to specify the shape of a mechanical component. It provides a method to determine whether a component is under, over, or exactly defined by a given dimensioning scheme. Measures for assessing the quality of a scheme are proposed. A solution is offered to a problem of tolerancing: given a toleranced dimensioning scheme, find the resulting tolerances between undimensioned parts of a component.
series	journal paper
last changed	2003/04/23 15:14

For more results click below: