Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 79

Reformat results as: short short into frame detailed detailed into frame

_id	e952
authors	Carrara, Gianfranco and Paoluzzi, Alberto
year	1980
title	A Systems Approach to Building Program Planning
source	computer Aided Building Design Laboratory Research Report. 80 p. : ill. Rome, Italy: December, 1980. CABD LAB RR. 80-02. includes bibliography
summary	In this paper problems of design performance and of building program planning are considered from the view point of the general system theory. After having formalized the concept of requirement, performance and performance specification, it is shown that a set of building objects (spaces and constructive elements) foreseeable within a program is a semilattice, and that therefore the ordering of constructive elements and spaces corresponds to an ordering of relations among feasible 'behaviors.' A set of feasible behaviors is then presented as an abstract system, eventually discussing some assumptions on which to base an input-state-output representation of it
keywords	theory, methods, problem solving, architecture, design, knowledge
series	CADline
last changed	2003/06/02 13:58

_id	a587
authors	Cohen, Elaine, Lyche, Tom and Riesenfeld, Richard F.
year	1980
title	Discrete B-Splines and Subdivision Techniques in Computer-Aided Geometric Design and Computer Graphics
source	computer Graphics and Image Processing. October, 1980. vol. 14: pp. 87- 111 : ill. includes bibliography
summary	The relevant theory of discrete B-splines with associated new algorithms is extended to provide a framework for understanding and implementing general subdivision schemes for nonuniform B-splines. The new derived polygon corresponding to an arbitrary refinement of the knot vector for an existing B-spline curve, including multiplicities, is shown to be formed by successive evaluations of the discrete B-spline defined by the original vertices, the original knot vector, and the refined knot vector. Existing subdivision algorithms can be seen as proper special cases. General subdivision has widespread applications in computer-aided geometric design, computer graphics, and numerical analysis. The new algorithms resulting from the new theory lead to a unification of the display model, the analysis model, and other needed models into a single geometric model from which other necessary models are easily derived. New sample algorithms for interference calculation, contouring, surface rendering, and other important calculations are presented
keywords	computational geometry, theory, algorithms, computer graphics, B-splines, curved surfaces
series	CADline
last changed	2003/06/02 13:58

_id	0830
authors	Ball, A. A.
year	1980
title	How to Make the Bicubic Patch Work Using Reparametrisation
source	1980 ? 11 p. includes bibliography
summary	This paper comprises a series of examples in numerical surface definition, loosely strung together, to show the practical limitations of the bicubic patch and how they can be overcome by reparametrisation. The concept of reparametrisation is more general than that used in computer- aided geometric design insofar as the reparametrisation is modeled in addition to the basic parametric equation
keywords	CAD, computational geometry, curved surfaces, parametrization
series	CADline
last changed	2003/06/02 13:58

_id	acadia07_164
id	acadia07_164
authors	Diniz, Nancy; Turner, Alasdair
year	2007
title	Towards a Living Architecture
doi	https://doi.org/10.52842/conf.acadia.2007.164
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 164-173
summary	Interaction is the latest currency in architecture, as responsive components are now reacting to the inhabitant of the space. These components are designed and installed by the architect with a view to the phenomenology of space, where the experience of the environment is previewed and pre-constructed before it is translated into the conception of the space. However, this traditional approach to new technology leaves no scope for the architecture to be alive in and of itself, and thus the installed piece quickly becomes just that—an installation: isolated and uncontained by its environment. In this paper, we argue that a way to approach a responsive architecture is to design for a piece that is truly living, and in order to propose a living architecture first we need to understand what the architecture of a living system is. This paper suggests a conceptual framework based on the theory of Autopoiesis in order to create a “self-producing” system through an experiment entitled, “The Life of a Wall” (Maturana and Varela 1980). The wall has a responsive membrane controlled by a genetic algorithm that reconfigures its behaviour and learns to adapt itself continually to the evolutionary properties of the environment, thus becoming a situated, living piece.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	d22c
authors	Eastman, C.M.
year	1980
title	System Facilities for CAD Databases
source	17th Design Automation Conference Proceedings
summary	In this paper, an attempt is made to lay out the special needs of design databases, as compared to the facilities provided in conventional database systems now commercially available. The paper starts from a point of commonality and focusses on the limitations and shortcomings commonly found in current database systems. It is impossible and unwise to make universal statements about DBMS capabilities. Instead, the goal is to identify those special features that, by their capability, provide distinctions beyond the general notions of speed and ratio of logical size to physical size.
series	journal paper
email
last changed	2003/05/15 21:22

_id	a5c3
authors	Er, M.C.
year	1981
title	The Relations of the Computation of Fibonnaci Numbers with the Polyphase Sort
source	8 p. Wollongong: Department of Computing Science, University of Wollongong, September, 1981. includes bibliography
summary	The theory of polyphase sort has simplified the mathematical derivations of Wilson and Shortt's (1980) algorithm, and offered an intuitive explanation of why Gries and Levin's (1980), and Urbanek's (1980) algorithms work. The computation of order-k Fibonacci numbers is equivalent to moving a window of matrix upwards in a series of ideal distributions
keywords	Fibonacci, sorting, mathematics, algorithms
series	CADline
last changed	2003/06/02 13:58

_id	c444
authors	Forrest, Robin A.
year	1980
title	The Twisted Cubic Curve : A Computer-Aided Geometric Design Approach
source	Computer Aided Design. July, 1980. vol. 12: pp. 165-172 : ill. includes bibliography
summary	The twisted cubic curve has the attraction of combining both commonly used curve definitions, the conic section and the parametric cubic, in a single form. A definition of the twisted cubic is developed in terms of geometric `handles' convenient for CAD and independent of parametrization, analogous to a well-known definition of conics. Conditions for the occurrence of asymptotes are investigated and shown to be considerably more complex than those for conics. Several more controllable subsets of the general curve are described. The paper concludes that use of the full generality of the twisted cubic is in most cases unjustified
keywords	computational geometry, curves, CAD, parametrization
series	CADline
last changed	2003/06/02 13:58

_id	4990
authors	Gips, J. and Stiny, G.
year	1980
title	Production System and Grammars: a Uniform Characterization
source	Environment and Planning B. 1980. vol. 7: pp. 399-408 : tables. includes bibliography
summary	The common structure underlying production system formalisms is developed. A variety of production system formalisms are summarized in terms of this structure. The structure is useful both for understanding existing systems and for developing new ones
keywords	systems, shape grammars, theory
series	CADline
last changed	2003/06/02 13:58

_id	b190
authors	Goldberg, Adele and Robson, David
year	1983
title	Smalltalk-80: The language and its implementation
source	New York, NY: Addison Wesley Co
summary	Smalltalk-80 is the classic standard Smalltalk language as described in Smalltalk-80: The Language and Its Implementation by Goldberg and Robson. This book is commonly called "the Blue Book". Squeak implements the dialect of Smalltalk described in this book, but has a different implementation. Overview of the Smalltalk Language Smalltalk is a general purpose, high level programming language. It was the first original "pure" object oriented language, but not the first to use the object oriented concept, which is credited to Simula 67. The explosive growth of Object Oriented Programming (OOP) technologies began in the early 1980's, with Smalltalk's introduction. Behind it was the idea that the individual human user should be the most important component of any computing system, and that programming should be a natural extension of thinking, and also a dynamic and evolutionary process consistent with the model of human learning activity. In Smalltalk, these ideas are embodied in a framework for human-computer communication. In a sense, Smalltalk is yet another language like C and Pascal, and programs can be written in Smalltalk that have the look and feel of such conventional languages. The difference lies * in the amount of code that can be reduced, * less cryptic syntax, * and code that is easier to handle for application maintenance and enhancement. But Smalltalk's most powerful feature is easy code reuse. Smalltalk makes reuse of programs, routines, and subroutines (methods) far easier. Though procedural languages allow reuse too, it is harder to do, and much easier to cheat. It is no surprise that Smalltalk is relatively easy to learn, mainly due to its simple syntax and semantics, as well as few concepts. Objects, classes, messages, and methods form the basis of programming in Smalltalk. The general methodology to use Smalltalk The notion of human-computer interface also results in Smalltalk promoting the development of safer systems. Errors in Smalltalk may be viewed as objects telling users that confusion exists as to how to perform a desired function.
series	other
last changed	2003/04/23 15:14

_id	76ce
authors	Grimson, W.
year	1985
title	Computational Experiments with a Feature Based Stereo Algorithm
source	IEEE Trans. Pattern Anal. Machine Intell., Vol. PAMI-7, No. 1
summary	Computational models of the human stereo system' can provide insight into general information processing constraints that apply to any stereo system, either artificial or biological. In 1977, Marr and Poggio proposed one such computational model, that was characterized as matching certain feature points in difference-of-Gaussian filtered images, and using the information obtained by matching coarser resolution representations to restrict the search'space for matching finer resolution representations. An implementation of the algorithm and'its testing on a range of images was reported in 1980. Since then a number of psychophysical experiments have suggested possible refinements to the model and modifications to the algorithm. As well, recent computational experiments applying the algorithm to a variety of natural images, especially aerial photographs, have led to a number of modifications. In this article, we present a version of the Marr-Poggio-Gfimson algorithm that embodies these modifications and illustrate its performance on a series of natural images.
series	journal paper
last changed	2003/04/23 15:14

_id	ga9809
id	ga9809
authors	Kälviäinen, Mirja
year	1998
title	The ideological basis of generative expression in design
source	International Conference on Generative Art
summary	This paper will discuss issues concerning the design ideology supporting the use and development of generative design. This design ideology is based on the unique qualities of craft production and on the forms or ideas from nature or the natural characteristics of materials. The main ideology presented here is the ideology of the 1980´s art craft production in Finland. It is connected with the general Finnish design ideology and with the design ideology of other western countries. The ideology for these professions is based on the common background of design principles stated in 19th century England. The early principles developed through the Arts and Crafts tradition which had a great impact on design thinking in Europe and in the United States. The strong continuity of this design ideology from 19th century England to the present computerized age can be detected. The application of these design principles through different eras shows the difference in the interpretations and in the permission of natural decorative forms. The ideology of the 1980ïs art craft in Finland supports the ideas and fulfilment of generative design in many ways. The reasons often given as the basis for making generative design with computers are in very many respects the same as the ideology for art craft. In Finland there is a strong connection between art craft and design ideology. The characteristics of craft have often been seen as the basis for industrial design skills. The main themes in the ideology of the 1980´s art craft in Finland can be compared to the ideas of generative design. The main issues in which the generative approach reflects a distinctive ideological thinking are: Way of Life: The work is the communication of the maker´s inner ideas. The concrete relationship with the environment, personality, uniqueness, communication, visionary qualities, development and growth of the maker are important. The experiments serve as a media for learning. Taste and Aesthetic Education: The real love affair is created by the non living object with the help of memories and thought. At their best objects create the basis in their stability and communication for durable human relationships. People have warm relationships especially with handmade products in which they can detect unique qualities and the feeling that the product has been made solely for them. Counter-culture: The aim of the work is to produce alternatives for technoburocracy and mechanical production and to bring subjective and unique experiences into the customerïs monotonious life. This ideology rejects the usual standardized mass production of our times. Mythical character: There is a metamorphosis in the birth of the product. In many ways the design process is about birth and growth. The creative process is a development story of the maker. The complexity of communication is the expression of the moments that have been lived. If you can sense the process of making in the product it makes it more real and nearer to life. Each piece of wood has its own beauty. Before you can work with it you must find the deep soul of its quality. The distinctive traits of the material, technique and the object are an essential part of the metamorphosis which brings the product into life. The form is not only for formïs sake but for other purposes, too. You cannot find loose forms in nature. Products have their beginnings in the material and are a part of the nature. This art craft ideology that supports the ideas of generative design can be applied either to the hand made crafts production or to the production exploiting new technology. The unique characteristics of craft and the expression of the material based development are a way to broaden the expression and forms of industrial products. However, for a crafts person it is not meaningful to fill the world with objects. In generative, computer based production this is possible. But maybe the production of unique pieces is still slower and makes the industrial production in that sense more ecological. People will be more attached to personal and unique objects, and thus the life cycle of the objects produced will be longer.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	ddss2006-hb-187
id	DDSS2006-HB-187
authors	Lidia Diappi and Paola Bolchi
year	2006
title	Gentrification Waves in the Inner-City of Milan - A multi agent / cellular automata model based on Smith's Rent Gap theory
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Innovations in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Springer, ISBN-10: 1-4020-5059-3, ISBN-13: 978-1-4020-5059-6, p. 187-201
summary	The aim of this paper is to investigate the gentrification process by applying an urban spatial model of gentrification, based on Smith's (1979; 1987; 1996) Rent Gap theory. The rich sociological literature on the topic mainly assumes gentrification to be a cultural phenomenon, namely the result of a demand pressure of the suburban middle and upper class, willing to return to the city (Ley, 1980; Lipton, 1977, May, 1996). Little attempt has been made to investigate and build a sound economic explanation on the causes of the process. The Rent Gap theory (RGT) of Neil Smith still represents an important contribution in this direction. At the heart of Smith's argument there is the assumption that gentrification takes place because capitals return to the inner city, creating opportunities for residential relocation and profit. This paper illustrates a dynamic model of Smith's theory through a multi-agent/ cellular automata system approach (Batty, 2005) developed on a Netlogo platform. A set of behavioural rules for each agent involved (homeowner, landlord, tenant and developer, and the passive 'dwelling' agent with their rent and level of decay) are formalised. The simulations show the surge of neighbouring degradation or renovation and population turn over, starting with different initial states of decay and estate rent values. Consistent with a Self Organized Criticality approach, the model shows that non linear interactions at local level may produce different configurations of the system at macro level. This paper represents a further development of a previous version of the model (Diappi, Bolchi, 2005). The model proposed here includes some more realistic factors inspired by the features of housing market dynamics in the city of Milan. It includes the shape of the potential rent according to city form and functions, the subdivision in areal submarkets according to the current rents, and their maintenance levels. The model has a more realistic visualisation of the city and its form, and is able to show the different dynamics of the emergent neighbourhoods in the last ten years in Milan.
keywords	Multi agent systems, Housing market, Gentrification, Emergent systems
series	DDSS
last changed	2006/08/29 12:55

_id	67c9
authors	Lipski, Witold Jr. and Preparata, Franco P.
year	1980
title	Finding the Contour of a Union of Iso-Oriented Rectangles
source	Journal of Algorithms. Academic Press Inc., January, 1980. pp. 235-246 : some ill. a short bibliography
summary	In this paper the following geometric problem is considered. Let R1,...,Rm be rectangles on the plane with sides parallel to the coordinate axes. An algorithm is described for finding the contour of F = R1, U...U Rm, in O(m log m+p log(2m2/p)) time, where p is the number of edges in the contour. This is O(m2) in the general case, and o(m log m) when F is without holes (then p < 8m - 4); both of these performances are optimal
keywords	rectangles, geometry, computational geometry, algorithms
series	CADline
last changed	2003/06/02 10:24

_id	244d
authors	Monedero, J., Casaus, A. and Coll, J.
year	1992
title	From Barcelona. Chronicle and Provisional Evaluation of a New Course on Architectural Solid Modelling by Computerized Means
doi	https://doi.org/10.52842/conf.ecaade.1992.351
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 351-362
summary	The first step made at the ETSAB in the computer field goes back to 1965, when professors Margarit and Buxade acquired an IBM computer, an electromechanical machine which used perforated cards and which was used to produce an innovative method of structural calculation. This method was incorporated in the academic courses and, at that time, this repeated question "should students learn programming?" was readily answered: the exercises required some knowledge of Fortran and every student needed this knowledge to do the exercises. This method, well known in Europe at that time, also provided a service for professional practice and marked the beginning of what is now the CC (Centro de Calculo) of our school. In 1980 the School bought a PDP1134, a computer which had 256 Kb of RAM, two disks of 5 Mb and one of lO Mb, and a multiplexor of 8 lines. Some time later the general politics of the UPC changed their course and this was related to the purchase of a VAX which is still the base of the CC and carries most of the administrative burden of the school. 1985 has probably been the first year in which we can talk of a general policy of the school directed towards computers. A report has been made that year, which includes an inquest adressed to the six Departments of the School (Graphic Expression, Projects, Structures, Construction, Composition and Urbanism) and that contains interesting data. According to the report, there were four departments which used computers in their current courses, while the two others (Projects and Composition) did not use them at all. The main user was the Department of Structures while the incidence of the remaining three was rather sporadic. The kind of problems detected in this report are very typical: lack of resources for hardware and software and for maintenance of the few computers that the school had at that moment; a demand (posed by the students) greatly exceeding the supply (computers and teachers). The main problem appeared to be the lack of computer graphic devices and proper software.
series	eCAADe
email
last changed	2022/06/07 07:58

_id	4b32
authors	Nilsson, Nils J.
year	1980
title	Principles of Artificial Intelligence
source	xv, 476 p. : ill. Palo Alto, California: Tioga Pub. Co., 1980. includes bibliography: p. 429-465 and index
summary	Describes AI ideas based on general computational concepts involving the kind of data structures used, the types of operations performed on these data structures, and the properties of control strategies used by AI systems. The book is designed as a text
keywords	AI, education
series	CADline
last changed	2003/06/02 10:24

_id	48db
authors	Proctor, George
year	2001
title	CADD Curriculum - The Issue of Visual Acuity
doi	https://doi.org/10.52842/conf.ecaade.2001.192
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 192-200
summary	Design educators attempt to train the eyes and minds of students to see and comprehend the world around them with the intention of preparing those students to become good designers, critical thinkers and ultimately responsible architects. Over the last eight years we have been developing the digital media curriculum of our architecture program with these fundamental values. We have built digital media use and instruction on the foundation of our program which has historically been based in physical model making. Digital modeling has gradually replaced the capacity of physical models as an analytical and thinking tool, and as a communication and presentation device. The first year of our program provides a foundation and introduction to 2d and 3d design and composition, the second year explores larger buildings and history, the third year explores building systems and structure through design studies of public buildings, fourth year explores urbanism, theory and technology through topic studios and, during the fifth year students complete a capstone project. Digital media and CADD have and are being synchronized with the existing NAAB accredited regimen while also allowing for alternative career options for students. Given our location in the Los Angeles region, many students with a strong background in digital media have gone on to jobs in video game design and the movie industry. Clearly there is much a student of architecture must learn to attain a level of professional competency. A capacity to think visually is one of those skills and is arguably a skill that distinguishes members of the visual arts (including Architecture) from other disciplines. From a web search of information posted by the American Academy of Opthamology, Visual Acuity is defined as an ability to discriminate fine details when looking at something and is often measured with the Snellen Eye Chart (the 20/20 eye test). In the context of this paper visual acuity refers to a subject’s capacity to discriminate useful abstractions in a visual field for the purposes of Visual Thinking- problem solving through seeing (Arnheim, 1969, Laseau 1980, Hoffman 1998). The growing use of digital media and the expanding ability to assemble design ideas and images through point-and-click methods makes the cultivation and development of visual skills all the more important to today’s crop of young architects. The advent of digital media also brings into question the traditional, static 2d methods used to build visual skills in a design education instead of promoting active 3d methods for teaching, learning and developing visual skills. Interactive digital movies provide an excellent platform for promoting visual acuity, and correlating the innate mechanisms of visual perception with the abstractions and notational systems used in professional discourse. In the context of this paper, pedagogy for building visual acuity is being considered with regard to perception of the real world, for example the visual survey of an environment, a site or a street scene and how that visual survey works in conjunction with practice.
keywords	Curriculum, Seeing, Abstracting, Notation
series	eCAADe
email
last changed	2022/06/07 08:00

_id	08ba
authors	Requicha, Aristides A.G.
year	1980
title	Representations for Rigid Solids : Theory, Methods, and Systems
source	Computing Surveys December, 1980. vol. 12: pp. 437-464 : ill. includes bibliography.
summary	Computer-based systems for modeling the geometry of rigid solid objects are becoming increasingly important in mechanical and civil engineering, architecture, computer graphics, computer vision, and other fields that deal with spatial phenomena. At the heart of such systems are symbol structures (representations) designating 'abstract solids' (subsets of Euclidean space) that model physical solids. Representations are the sources of data for procedures which compute useful properties of objects. The variety and uses of systems embodying representations of solids are growing rapidly, but so are the difficulties in assessing current designs, specifying the characteristics that future systems should exhibit, and designing systems to meet such specifications. This paper resolves many of these difficulties by providing a coherent view, based on sound theoretical principles, of what is presently known about the representation of solids. The paper is divided into three parts. The first introduces a simple mathematical framework for characterizing certain important aspects of representations, for example, their semantic (geometric) integrity. The second part uses the framework to describe and compare all of the major known schemes for representing solids. The third part briefly surveys extant geometric modeling systems and then applies the concepts developed in the paper to the high-level design of a multiple- representation geometric modeling system which exhibits a level of reliability and versatility superior to that of systems currently used in industrial computer-aided design and manufacturing
keywords	CAD, CAM, computational geometry, geometric modeling, representation,CSG, B-rep
series	CADline
last changed	2003/06/02 13:58

_id	5d5a
authors	Richens, P.
year	1980
title	The Design of a General Drafting System
source	CAD80, 4th International Conference and Exhibition of Computers in Design Engineering, Brighton
series	other
email
more	http://www.arct.cam.ac.uk/research/pubs/
last changed	2000/03/05 19:05

_id	9fcb
authors	Steele, Guy Lewis
year	1980
title	The Definition and Implementation of a Computer Programming Language Based Constraints
source	MIT - AITR-595
summary	The constraint paradigm is a model of computation in which values are deduced whenever possible, under the limitation that deductions be local in a certain sense. One may visualize a constraint 'program' as a network of devices connected by wires. Data values may flow along the wires, and computation is performed by the devices. A device computes using only locally available information (with a few exceptions), and places newly derived values on other, locally attached wires. In this way computed values are propagated. An advantage of the constraint paradigm (not unique to it) is that a single relationship can be used in more than one direction. The connections to a device are not labelled as inputs and outputs; a device will compute with whatever values are available, and produce as many new values as it can. General theorem provers are capable of such behavior, but tend to suffer from combinatorial explosion; it is not usually useful to derive all the possible consequences of a set of hypotheses. The constraint paradigm places a certain kind of limitation on the deduction process. The limitations imposed by the constraint paradigm are not the only one possible. It is argued, however, that they are restrictive enough to forestall combinatorial explosion in many interesting computational situations, yet permissive enough to allow useful computations in practical situations. Moreover, the paradigm is intuitive: It is easy to visualize the computational effects of these particular limitations, and the paradigm is a natural way of expressing programs for certain applications, in particular relationships arising in computer-aided design. A number of implementations of constraint-based programming languages are presented. A progression of ever more powerful languages is described, complete implementations are presented and design difficulties and alternatives are discussed. The goal approached, though not quite reached, is a complete programming system which will implicitly support the constraint paradigm to the same extent that LISP, say, supports automatic storage management.
series	thesis:PhD
email
more	ftp://publications.ai.mit.edu/ai-publications/pdf/AITR-595.pdf
last changed	2003/02/12 22:37

_id	c153
authors	Ullman, Jeffrey D.
year	1980
title	Principles of Database Systems
source	379 p. : ill. Potomac, Maryland: Computer Science Press, 1980. includes bibliography: p.360-371 and index. -- (Computer Software Engineering Series)
summary	A large part is a description of relations, their algebra and calculus, and the query languages that have been designed using these concepts. There are explanations of how the theory can be used to design good systems. A description of the optimization of queries in relation-based query languages is provided, and a chapter is devoted to the recently developed protocols for guaranteeing consistency in databases that are operated on by many processes concurrently
keywords	database, systems, theory, relational database, education, techniques
series	CADline
last changed	2003/06/02 13:58

For more results click below: