Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 16 of 16

Reformat results as: short short into frame detailed detailed into frame

_id	0105
authors	Bossan, Mario and Ronchi, Alfredo M.
year	1989
title	Presentazione Esperienza Didattica del Dipartimento di Ingegneria dei Sistemi Edilizi e Territoriali - Politecnico di Milano
doi	https://doi.org/10.52842/conf.ecaade.1989.x.x4i
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.8.1-9.8.19
summary	Didactic and research experience developed at the "Dipartimento di Ingegneria dei Sistemi Edilizi e Territoriali del Politecnico di Milano" in the environment of Computer Aided Architectural Design (CAAD). From the early part of the 1980's, using initially at an experimental level the resources available at the departmental centre of calculation various applications of CAD techniques in the building sector have been effected at DISET (Dipartimento di Ingegneria del Politecnico di Milano). During 1983, after a three year period of experimenting with these systems, it was decided to organise and activate a small computer aided design centre, within the department, the use of which was reserved for dissertation and research students.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	dc49
authors	Maver, T.W.
year	1980
title	Computer Aided Design: Applications in Architecture
source	Chapter in Human Interaction with Computers, (Ed: H Smith et al) Academic Press, 203-229
series	other
email
last changed	2003/06/02 15:00

_id	952f
authors	Soloway, E., Guzdial, M. and Hay, K.
year	1994
title	Learner-Centered Design: The Challenge for HCI in the 21st Century
source	Interactions , no. April (1994): 36-48
summary	In the 1980's a major transformation took place in the computing world: attention was finally being paid to making computers easier-to-use. You know the history: in the 1970's folks at Xerox were exploring so-called personal computers and developing graphical, point-and-click interfaces. The goal was to make using computers less cognitively taxing, there- by permitting the user to focus more mental cycles on getting the job done. For some time people had recognized that there would be benefits if users could interact with computers using visual cues and motor movements instead of testu- al/linguistic strings. However, computer cycles were costly; they could hardly be wasted on supporting a non-textual interface. There was barely enough zorch (i.e., computer power, measured in your favorite unit) to simply calculate the payroll.
series	journal paper
last changed	2003/04/23 15:50

_id	acadia19_392
id	acadia19_392
authors	Steinfeld, Kyle
year	2019
title	GAN Loci
doi	https://doi.org/10.52842/conf.acadia.2019.392
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 392-403
summary	This project applies techniques in machine learning, specifically generative adversarial networks (or GANs), to produce synthetic images intended to capture the predominant visual properties of urban places. We propose that imaging cities in this manner represents the first computational approach to documenting the Genius Loci of a city (Norberg-Schulz, 1980), which is understood to include those forms, textures, colors, and qualities of light that exemplify a particular urban location and that set it apart from similar places. Presented here are methods for the collection of urban image data, for the necessary processing and formatting of this data, and for the training of two known computational statistical models (StyleGAN (Karras et al., 2018) and Pix2Pix (Isola et al., 2016)) that identify visual patterns distinct to a given site and that reproduce these patterns to generate new images. These methods have been applied to image nine distinct urban contexts across six cities in the US and Europe, the results of which are presented here. While the product of this work is not a tool for the design of cities or building forms, but rather a method for the synthetic imaging of existing places, we nevertheless seek to situate the work in terms of computer-assisted design (CAD). In this regard, the project is demonstrative of a new approach to CAD tools. In contrast with existing tools that seek to capture the explicit intention of their user (Aish, Glynn, Sheil 2017), in applying computational statistical methods to the production of images that speak to the implicit qualities that constitute a place, this project demonstrates the unique advantages offered by such methods in capturing and expressing the tacit.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:56

_id	fc80
authors	Ubbelohde, S. and Humann, C.
year	1998
title	Comparative Evaluation of Four Daylighting Software Programs
source	1998 ACEEE Summer Study on Energy Efficiency in Buildings Proceedings. American Council for an Energy-Efficient Economy
summary	By the mid-1980's, a number of software packages were under development to predict daylighting performance in buildings, in particular illumination levels in daylighted spaces. An evaluation in 1988 by Ubbelohde et al. demonstrated that none of the software then available was capable of predicting the simplest of real daylighting designs. In the last ten years computer capabilities have evolved rapidly and we have four major packages widely available in the United States. This paper presents a comparative evaluation from the perspective of building and daylighting design practice. A contemporary building completed in 1993 was used as a base case for evaluation. We present the results from field measurements, software predictions and physical modeling as a basis for discussing the capabilities of the software packages in architectural design practice. We found the current software packages far more powerful and nuanced in their ability to predict daylight than previously. Some can accurately predict quantitative daylight performance under varying sky conditions and produce handsome and accurate visualizations of the space. The programs differ significantly, however, in their ease of use, modeling basis and the emphasis between quantitative predictions and visualization in the output.
series	other
last changed	2003/04/23 15:50

_id	452c
authors	Vanier, D. J. and Worling, Jamie
year	1986
title	Three-dimensional Visualization: A Case Study
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 92-102
summary	Three-dimensional computer visualization has intrigued both building designers and computer scientists for decades. Research and conference papers present an extensive list of existing and potential uses for threedimensional geometric data for the building industry (Baer et al., 1979). Early studies on visualization include urban planning (Rogers, 1980), treeshading simulation (Schiler and Greenberg, 1980), sun studies (Anon, 1984), finite element analysis (Proulx, 1983), and facade texture rendering (Nizzolese, 1980). With the advent of better interfaces, faster computer processing speeds and better application packages, there had been interest on the part of both researchers and practitioners in three-dimensional -models for energy analysis (Pittman and Greenberg, 1980), modelling with transparencies (Hebert, 1982), super-realistic rendering (Greenberg, 1984), visual impact (Bridges, 1983), interference clash checking (Trickett, 1980), and complex object visualization (Haward, 1984). The Division of Building Research is currently investigating the application of geometric modelling in the building delivery process using sophisticated software (Evans, 1985). The first stage of the project (Vanier, 1985), a feasibility study, deals with the aesthetics of the mode. It identifies two significant requirements for geometric modelling systems: the need for a comprehensive data structure and the requirement for realistic accuracies and tolerances. This chapter presents the results of the second phase of this geometric modelling project, which is the construction of 'working' and 'presentation' models for a building.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	caadria2006_589
id	caadria2006_589
authors	YU-NAN YEH
year	2006
title	FREEDOM OF FORM: THE ORIENTAL CALLIGRAPHY AND AESTHETICS IN DIGITAL FABRICATION
doi	https://doi.org/10.52842/conf.caadria.2006.x.v6f
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 589-591
summary	Computer-Aided Design (CAD) / Computer-Aided Manufacturing (CAM) related research has been discussed since the 1960's (Ryder, G. et al, 2002, Mark Burry, 2002). Indeed, both Frank O. Gehry and Toyo Ito utilized CAD/CAM to create rich architectural form and in so doing gave birth to a new type of aesthetics. The visualization and liberalization of form space is the single most important characteristic attributable to the use of computers as a design tool. By the 1980's, Laser cutting and Rapid Prototyping techniques developed from CAM, became important new digital tools when researchers and designers discussed the development of form in architecture.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	ddss2004_ra-33
id	ddss2004_ra-33
authors	Diappi, L., P. Bolchim, and M. Buscema
year	2004
title	Improved Understanding of Urban Sprawl Using Neural Networks
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 14020-2408-8, p. 33-49
summary	It is widely accepted that the spatial pattern of settlements is a crucial factor affecting quality of life and environmental sustainability, but few recent studies have attempted to examine the phenomenon of sprawl by modelling the process rather than adopting a descriptive approach. The issue was partly addressed by models of land use and transportation which were mainly developed in the UK and US in the 1970s and 1980s, but the major advances were made in the area of modelling transportation, while very little was achieved in the area of spatial and temporal land use. Models of land use and transportation are well-established tools, based on explicit, exogenouslyformulated rules within a theoretical framework. The new approaches of artificial intelligence, and in particular, systems involving parallel processing, (Neural Networks, Cellular Automata and Multi-Agent Systems) defined by the expression “Neurocomputing”, allow problems to be approached in the reverse, bottom-up, direction by discovering rules, relationships and scenarios from a database. In this article we examine the hypothesis that territorial micro-transformations occur according to a local logic, i.e. according to use, accessibility, the presence of services and conditions of centrality, periphericity or isolation of each territorial “cell” relative to its surroundings. The prediction capabilities of different architectures of supervised Neural networks are implemented to the south Metropolitan area of Milan at two different temporal thresholds and discussed. Starting from data on land use in 1980 and 1994 and by subdividing the area into square cells on an orthogonal grid, the model produces a spatial and functional map of urbanisation in 2008. An implementation of the SOM (Self Organizing Map) processing to the Data Base allows the typologies of transformation to be identified, i.e. the classes of area which are transformed in the same way and which give rise to territorial morphologies; this is an interesting by-product of the approach.
keywords	Neural Networks, Self-Organizing Maps, Land-Use Dynamics, Supervised Networks
series	DDSS
last changed	2004/07/03 22:13

_id	76ce
authors	Grimson, W.
year	1985
title	Computational Experiments with a Feature Based Stereo Algorithm
source	IEEE Trans. Pattern Anal. Machine Intell., Vol. PAMI-7, No. 1
summary	Computational models of the human stereo system' can provide insight into general information processing constraints that apply to any stereo system, either artificial or biological. In 1977, Marr and Poggio proposed one such computational model, that was characterized as matching certain feature points in difference-of-Gaussian filtered images, and using the information obtained by matching coarser resolution representations to restrict the search'space for matching finer resolution representations. An implementation of the algorithm and'its testing on a range of images was reported in 1980. Since then a number of psychophysical experiments have suggested possible refinements to the model and modifications to the algorithm. As well, recent computational experiments applying the algorithm to a variety of natural images, especially aerial photographs, have led to a number of modifications. In this article, we present a version of the Marr-Poggio-Gfimson algorithm that embodies these modifications and illustrate its performance on a series of natural images.
series	journal paper
last changed	2003/04/23 15:14

_id	c4b8
authors	Lane, Jeffrey M. and Riesenfeld, Richard F.
year	1980
title	A Theoretical Development for the Computer Generation and Display of Piecewise Polynomial Surfaces
source	IEEE Transactions on Pattern Analysis and Machine Intelligence. January, 1980 Vol. PAM 1-2: pp. 35-46 : ill.
summary	includes a short bibliography. Two algorithms for parametric piecewise polynomial evaluation and generation are described. The mathematical development of these algorithms is shown to generalize to new algorithms for obtaining curve and surface intersections and for the computer display of parametric curves and surfaces
keywords	display, algorithms, intersection, CAD, computer graphics, B-splines, curved surfaces
series	CADline
last changed	2003/06/02 13:58

_id	cf2011_p170
id	cf2011_p170
authors	Barros, Mário; Duarte José, Chaparro Bruno
year	2011
title	Thonet Chairs Design Grammar: a Step Towards the Mass Customization of Furniture
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 181-200.
summary	The paper presents the first phase of research currently under development that is focused on encoding Thonet design style into a generative design system using a shape grammar. The ultimate goal of the work is the design and production of customizable chairs using computer assisted tools, establishing a feasible practical model of the paradigm of mass customization (Davis, 1987). The current research step encompasses the following three steps: (1) codification of the rules describing Thonet design style into a shape grammar; (2) implementing the grammar into a computer tool as parametric design; and (3) rapid prototyping of customized chair designs within the style. Future phases will address the transformation of the Thonet’s grammar to create a new style and the production of real chair designs in this style using computer aided manufacturing. Beginning in the 1830’s, Austrian furniture designer Michael Thonet began experimenting with forming steam beech, in order to produce lighter furniture using fewer components, when compared with the standards of the time. Using the same construction principles and standardized elements, Thonet produced different chairs designs with a strong formal resemblance, creating his own design language. The kit assembly principle, the reduced number of elements, industrial efficiency, and the modular approach to furniture design as a system of interchangeable elements that may be used to assemble different objects enable him to become a pioneer of mass production (Noblet, 1993). The most paradigmatic example of the described vision of furniture design is the chair No. 14 produced in 1858, composed of six structural elements. Due to its simplicity, lightness, ability to be stored in flat and cubic packaging for individual of collective transportation, respectively, No. 14 became one of the most sold chairs worldwide, and it is still in production nowadays. Iconic examples of mass production are formally studied to provide insights to mass customization studies. The study of the shape grammar for the generation of Thonet chairs aimed to ensure rules that would make possible the reproduction of the selected corpus, as well as allow for the generation of new chairs within the developed grammar. Due to the wide variety of Thonet chairs, six chairs were randomly chosen to infer the grammar and then this was fine tuned by checking whether it could account for the generation of other designs not in the original corpus. Shape grammars (Stiny and Gips, 1972) have been used with sucesss both in the analysis as in the synthesis of designs at different scales, from product design to building and urban design. In particular, the use of shape grammars has been efficient in the characterization of objects’ styles and in the generation of new designs within the analyzed style, and it makes design rules amenable to computers implementation (Duarte, 2005). The literature includes one other example of a grammar for chair design by Knight (1980). In the second step of the current research phase, the outlined shape grammar was implemented into a computer program, to assist the designer in conceiving and producing customized chairs using a digital design process. This implementation was developed in Catia by converting the grammar into an equivalent parametric design model. In the third phase, physical models of existing and new chair designs were produced using rapid prototyping. The paper describes the grammar, its computer implementation as a parametric model, and the rapid prototyping of physical models. The generative potential of the proposed digital process is discussed in the context of enabling the mass customization of furniture. The role of the furniture designer in the new paradigm and ideas for further work also are discussed.
keywords	Thonet; furniture design; chair; digital design process; parametric design; shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	076e
authors	Ennis, G. and Lindsay, M.
year	1999
title	VRML Possibilities: The evolution of the Glasgow Model
source	Proceedings of International Conference on Virtual Systems and MultiMedia. University of Abertay. Dundee
summary	During the 1980's, ABACUS, a research unit at the University of Strathclyde developed an interest in the ability to model and manipulate large geometrical databases of urban topography. Initially, this interest lay solely in the ability to source, capture and store the relevant data. However, once constructed, these models proved genuinely useful to a wide range of users and there was soon a demand for more functionality relating to the manipulation not just of the graphics, but also the range of urban attributes. Although a number of improvements were implemented there were drawbacks to the wide adoption of the software produced. The problems were almost all due to deficiencies in the then current hardware and software system available to the professions, and although this strand of research continued to be pursued, most of the development had to be focused on research applications and deployment. However, the recent advent of the Virtual Reality Modelling Language (VRML) standards have rekindled interest in this field since this language enables many of the issues that have proved problematic in the past to be addressed and solved. The potential now exists to provide wide access to large scale urban models. This paper focuses on the application of VRML as applied to the 'Glasgow Model'.
series	other
email
last changed	2003/04/23 15:50

_id	b190
authors	Goldberg, Adele and Robson, David
year	1983
title	Smalltalk-80: The language and its implementation
source	New York, NY: Addison Wesley Co
summary	Smalltalk-80 is the classic standard Smalltalk language as described in Smalltalk-80: The Language and Its Implementation by Goldberg and Robson. This book is commonly called "the Blue Book". Squeak implements the dialect of Smalltalk described in this book, but has a different implementation. Overview of the Smalltalk Language Smalltalk is a general purpose, high level programming language. It was the first original "pure" object oriented language, but not the first to use the object oriented concept, which is credited to Simula 67. The explosive growth of Object Oriented Programming (OOP) technologies began in the early 1980's, with Smalltalk's introduction. Behind it was the idea that the individual human user should be the most important component of any computing system, and that programming should be a natural extension of thinking, and also a dynamic and evolutionary process consistent with the model of human learning activity. In Smalltalk, these ideas are embodied in a framework for human-computer communication. In a sense, Smalltalk is yet another language like C and Pascal, and programs can be written in Smalltalk that have the look and feel of such conventional languages. The difference lies * in the amount of code that can be reduced, * less cryptic syntax, * and code that is easier to handle for application maintenance and enhancement. But Smalltalk's most powerful feature is easy code reuse. Smalltalk makes reuse of programs, routines, and subroutines (methods) far easier. Though procedural languages allow reuse too, it is harder to do, and much easier to cheat. It is no surprise that Smalltalk is relatively easy to learn, mainly due to its simple syntax and semantics, as well as few concepts. Objects, classes, messages, and methods form the basis of programming in Smalltalk. The general methodology to use Smalltalk The notion of human-computer interface also results in Smalltalk promoting the development of safer systems. Errors in Smalltalk may be viewed as objects telling users that confusion exists as to how to perform a desired function.
series	other
last changed	2003/04/23 15:14

_id	0a4c
authors	Holt, R.C. and Hume, J.N.P.
year	1980
title	Programming Standard PASCAL
source	x, 381 p. Reston, Verginia: Reston Publishing Company, Inc., 1980. includes index
summary	A comprehensive look at data structures, records, files, pointers and more, for effective programming using PASCAL. A practical guide book from an introduction level through advanced coverage of numerical methods, assembly language programming and compiler construction
keywords	PASCAL, programming, languages, education
series	CADline
last changed	2003/06/02 13:58

_id	9fcb
authors	Steele, Guy Lewis
year	1980
title	The Definition and Implementation of a Computer Programming Language Based Constraints
source	MIT - AITR-595
summary	The constraint paradigm is a model of computation in which values are deduced whenever possible, under the limitation that deductions be local in a certain sense. One may visualize a constraint 'program' as a network of devices connected by wires. Data values may flow along the wires, and computation is performed by the devices. A device computes using only locally available information (with a few exceptions), and places newly derived values on other, locally attached wires. In this way computed values are propagated. An advantage of the constraint paradigm (not unique to it) is that a single relationship can be used in more than one direction. The connections to a device are not labelled as inputs and outputs; a device will compute with whatever values are available, and produce as many new values as it can. General theorem provers are capable of such behavior, but tend to suffer from combinatorial explosion; it is not usually useful to derive all the possible consequences of a set of hypotheses. The constraint paradigm places a certain kind of limitation on the deduction process. The limitations imposed by the constraint paradigm are not the only one possible. It is argued, however, that they are restrictive enough to forestall combinatorial explosion in many interesting computational situations, yet permissive enough to allow useful computations in practical situations. Moreover, the paradigm is intuitive: It is easy to visualize the computational effects of these particular limitations, and the paradigm is a natural way of expressing programs for certain applications, in particular relationships arising in computer-aided design. A number of implementations of constraint-based programming languages are presented. A progression of ever more powerful languages is described, complete implementations are presented and design difficulties and alternatives are discussed. The goal approached, though not quite reached, is a complete programming system which will implicitly support the constraint paradigm to the same extent that LISP, say, supports automatic storage management.
series	thesis:PhD
email
more	ftp://publications.ai.mit.edu/ai-publications/pdf/AITR-595.pdf
last changed	2003/02/12 22:37

_id	40ad
authors	Yessios, Chris I.
year	1980
title	Generation and Visualization of Architectural Forms with Tekton
source	1980? pp. 68-79 : ill. includes bibliography
summary	Tekton is an interactive computer aided architectural design software system. It incorporates graphic input and 3-D modeling capabilities, a potent notational system which is based on an algebra like linguistic model for the representation of transformation and spatial compositions, hidden face elimination, shadowing and texture rendering. The latter feature has been specifically designed for the visualization of architectural forms and materials, through renderings of a free hand drawing quality. They are derived by generative semi-random models, included in the system. The Tekton language allows for interactive unlimited editing and modification of previously generated compositions
keywords	CAD, architecture, modeling, computer graphics, rendering
series	CADline
last changed	2003/06/02 13:58

No more hits.