Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 81

Reformat results as: short short into frame detailed detailed into frame

_id	cf2011_p170
id	cf2011_p170
authors	Barros, Mário; Duarte José, Chaparro Bruno
year	2011
title	Thonet Chairs Design Grammar: a Step Towards the Mass Customization of Furniture
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 181-200.
summary	The paper presents the first phase of research currently under development that is focused on encoding Thonet design style into a generative design system using a shape grammar. The ultimate goal of the work is the design and production of customizable chairs using computer assisted tools, establishing a feasible practical model of the paradigm of mass customization (Davis, 1987). The current research step encompasses the following three steps: (1) codification of the rules describing Thonet design style into a shape grammar; (2) implementing the grammar into a computer tool as parametric design; and (3) rapid prototyping of customized chair designs within the style. Future phases will address the transformation of the Thonet’s grammar to create a new style and the production of real chair designs in this style using computer aided manufacturing. Beginning in the 1830’s, Austrian furniture designer Michael Thonet began experimenting with forming steam beech, in order to produce lighter furniture using fewer components, when compared with the standards of the time. Using the same construction principles and standardized elements, Thonet produced different chairs designs with a strong formal resemblance, creating his own design language. The kit assembly principle, the reduced number of elements, industrial efficiency, and the modular approach to furniture design as a system of interchangeable elements that may be used to assemble different objects enable him to become a pioneer of mass production (Noblet, 1993). The most paradigmatic example of the described vision of furniture design is the chair No. 14 produced in 1858, composed of six structural elements. Due to its simplicity, lightness, ability to be stored in flat and cubic packaging for individual of collective transportation, respectively, No. 14 became one of the most sold chairs worldwide, and it is still in production nowadays. Iconic examples of mass production are formally studied to provide insights to mass customization studies. The study of the shape grammar for the generation of Thonet chairs aimed to ensure rules that would make possible the reproduction of the selected corpus, as well as allow for the generation of new chairs within the developed grammar. Due to the wide variety of Thonet chairs, six chairs were randomly chosen to infer the grammar and then this was fine tuned by checking whether it could account for the generation of other designs not in the original corpus. Shape grammars (Stiny and Gips, 1972) have been used with sucesss both in the analysis as in the synthesis of designs at different scales, from product design to building and urban design. In particular, the use of shape grammars has been efficient in the characterization of objects’ styles and in the generation of new designs within the analyzed style, and it makes design rules amenable to computers implementation (Duarte, 2005). The literature includes one other example of a grammar for chair design by Knight (1980). In the second step of the current research phase, the outlined shape grammar was implemented into a computer program, to assist the designer in conceiving and producing customized chairs using a digital design process. This implementation was developed in Catia by converting the grammar into an equivalent parametric design model. In the third phase, physical models of existing and new chair designs were produced using rapid prototyping. The paper describes the grammar, its computer implementation as a parametric model, and the rapid prototyping of physical models. The generative potential of the proposed digital process is discussed in the context of enabling the mass customization of furniture. The role of the furniture designer in the new paradigm and ideas for further work also are discussed.
keywords	Thonet; furniture design; chair; digital design process; parametric design; shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ga9809
id	ga9809
authors	Kälviäinen, Mirja
year	1998
title	The ideological basis of generative expression in design
source	International Conference on Generative Art
summary	This paper will discuss issues concerning the design ideology supporting the use and development of generative design. This design ideology is based on the unique qualities of craft production and on the forms or ideas from nature or the natural characteristics of materials. The main ideology presented here is the ideology of the 1980´s art craft production in Finland. It is connected with the general Finnish design ideology and with the design ideology of other western countries. The ideology for these professions is based on the common background of design principles stated in 19th century England. The early principles developed through the Arts and Crafts tradition which had a great impact on design thinking in Europe and in the United States. The strong continuity of this design ideology from 19th century England to the present computerized age can be detected. The application of these design principles through different eras shows the difference in the interpretations and in the permission of natural decorative forms. The ideology of the 1980ïs art craft in Finland supports the ideas and fulfilment of generative design in many ways. The reasons often given as the basis for making generative design with computers are in very many respects the same as the ideology for art craft. In Finland there is a strong connection between art craft and design ideology. The characteristics of craft have often been seen as the basis for industrial design skills. The main themes in the ideology of the 1980´s art craft in Finland can be compared to the ideas of generative design. The main issues in which the generative approach reflects a distinctive ideological thinking are: Way of Life: The work is the communication of the maker´s inner ideas. The concrete relationship with the environment, personality, uniqueness, communication, visionary qualities, development and growth of the maker are important. The experiments serve as a media for learning. Taste and Aesthetic Education: The real love affair is created by the non living object with the help of memories and thought. At their best objects create the basis in their stability and communication for durable human relationships. People have warm relationships especially with handmade products in which they can detect unique qualities and the feeling that the product has been made solely for them. Counter-culture: The aim of the work is to produce alternatives for technoburocracy and mechanical production and to bring subjective and unique experiences into the customerïs monotonious life. This ideology rejects the usual standardized mass production of our times. Mythical character: There is a metamorphosis in the birth of the product. In many ways the design process is about birth and growth. The creative process is a development story of the maker. The complexity of communication is the expression of the moments that have been lived. If you can sense the process of making in the product it makes it more real and nearer to life. Each piece of wood has its own beauty. Before you can work with it you must find the deep soul of its quality. The distinctive traits of the material, technique and the object are an essential part of the metamorphosis which brings the product into life. The form is not only for formïs sake but for other purposes, too. You cannot find loose forms in nature. Products have their beginnings in the material and are a part of the nature. This art craft ideology that supports the ideas of generative design can be applied either to the hand made crafts production or to the production exploiting new technology. The unique characteristics of craft and the expression of the material based development are a way to broaden the expression and forms of industrial products. However, for a crafts person it is not meaningful to fill the world with objects. In generative, computer based production this is possible. But maybe the production of unique pieces is still slower and makes the industrial production in that sense more ecological. People will be more attached to personal and unique objects, and thus the life cycle of the objects produced will be longer.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	4b32
authors	Nilsson, Nils J.
year	1980
title	Principles of Artificial Intelligence
source	xv, 476 p. : ill. Palo Alto, California: Tioga Pub. Co., 1980. includes bibliography: p. 429-465 and index
summary	Describes AI ideas based on general computational concepts involving the kind of data structures used, the types of operations performed on these data structures, and the properties of control strategies used by AI systems. The book is designed as a text
keywords	AI, education
series	CADline
last changed	2003/06/02 10:24

_id	08ba
authors	Requicha, Aristides A.G.
year	1980
title	Representations for Rigid Solids : Theory, Methods, and Systems
source	Computing Surveys December, 1980. vol. 12: pp. 437-464 : ill. includes bibliography.
summary	Computer-based systems for modeling the geometry of rigid solid objects are becoming increasingly important in mechanical and civil engineering, architecture, computer graphics, computer vision, and other fields that deal with spatial phenomena. At the heart of such systems are symbol structures (representations) designating 'abstract solids' (subsets of Euclidean space) that model physical solids. Representations are the sources of data for procedures which compute useful properties of objects. The variety and uses of systems embodying representations of solids are growing rapidly, but so are the difficulties in assessing current designs, specifying the characteristics that future systems should exhibit, and designing systems to meet such specifications. This paper resolves many of these difficulties by providing a coherent view, based on sound theoretical principles, of what is presently known about the representation of solids. The paper is divided into three parts. The first introduces a simple mathematical framework for characterizing certain important aspects of representations, for example, their semantic (geometric) integrity. The second part uses the framework to describe and compare all of the major known schemes for representing solids. The third part briefly surveys extant geometric modeling systems and then applies the concepts developed in the paper to the high-level design of a multiple- representation geometric modeling system which exhibits a level of reliability and versatility superior to that of systems currently used in industrial computer-aided design and manufacturing
keywords	CAD, CAM, computational geometry, geometric modeling, representation,CSG, B-rep
series	CADline
last changed	2003/06/02 13:58

_id	c153
authors	Ullman, Jeffrey D.
year	1980
title	Principles of Database Systems
source	379 p. : ill. Potomac, Maryland: Computer Science Press, 1980. includes bibliography: p.360-371 and index. -- (Computer Software Engineering Series)
summary	A large part is a description of relations, their algebra and calculus, and the query languages that have been designed using these concepts. There are explanations of how the theory can be used to design good systems. A description of the optimization of queries in relation-based query languages is provided, and a chapter is devoted to the recently developed protocols for guaranteeing consistency in databases that are operated on by many processes concurrently
keywords	database, systems, theory, relational database, education, techniques
series	CADline
last changed	2003/06/02 13:58

_id	b04c
authors	Goerger, S., Darken, R., Boyd, M., Gagnon, T., Liles, S., Sullivan, J. and Lawson, J.
year	1996
title	Spatial Knowledge Acquisition from Maps and Virtual Environments in Complex Architectural Space
source	Proc. 16 th Applied Behavioral Sciences Symposium, 22-23 April, U.S. Airforce Academy, Colorado Springs, CO., 1996, 6-10
summary	It has often been suggested that due to its inherent spatial nature, a virtual environment (VE) might be a powerful tool for spatial knowledge acquisition of a real environment, as opposed to the use of maps or some other two-dimensional, symbolic medium. While interesting from a psychological point of view, a study of the use of a VE in lieu of a map seems nonsensical from a practical point of view. Why would the use of a VE preclude the use of a map? The more interesting investigation would be of the value added of the VE when used with a map. If the VE could be shown to substantially improve navigation performance, then there might be a case for its use as a training tool. If not, then we have to assume that maps continue to be the best spatial knowledge acquisition tool available. An experiment was conducted at the Naval Postgraduate School to determine if the use of an interactive, three-dimensional virtual environment would enhance spatial knowledge acquisition of a complex architectural space when used in conjunction with floor plan diagrams. There has been significant interest in this research area of late. Witmer, Bailey, and Knerr (1995) showed that a VE was useful in acquiring route knowledge of a complex building. Route knowledge is defined as the procedural knowledge required to successfully traverse paths between distant locations (Golledge, 1991). Configurational (or survey) knowledge is the highest level of spatial knowledge and represents a map-like internal encoding of the environment (Thorndyke, 1980). The Witmer study could not confirm if configurational knowledge was being acquired. Also, no comparison was made to a map-only condition, which we felt is the most obvious alternative. Comparisons were made only to a real world condition and a symbolic condition where the route is presented verbally.
series	other
last changed	2003/04/23 15:50

_id	0439
authors	Kant, Elaine
year	1980
title	A Knowledge-Based Approach to Using Efficiency Estimation in Program Synthesis
source	1980? pp. 457-462. includes bibliography
summary	This paper describes a system for using efficiency knowledge in program synthesis. The system, called LIBRA, uses a combination of knowledge-based rules and algebraic cost estimates to compare potential program implementations. Efficiency knowledge is used to control the selection of algorithm and data structure implementations and the application of optimizing transformations. Prototypes of programming constructs and of cost estimation techniques are used to simplify the efficiency analysis process and to assist in the acquisition of efficiency knowledge associated with new coding knowledge. LIBRA has been used to guide the selection of implementations for several programs that classify, retrieve information, sort, and generate prime numbers
keywords	knowledge base, systems, programming, performance, synthesis, evaluation
series	CADline
last changed	1999/02/12 15:08

_id	c4b8
authors	Lane, Jeffrey M. and Riesenfeld, Richard F.
year	1980
title	A Theoretical Development for the Computer Generation and Display of Piecewise Polynomial Surfaces
source	IEEE Transactions on Pattern Analysis and Machine Intelligence. January, 1980 Vol. PAM 1-2: pp. 35-46 : ill.
summary	includes a short bibliography. Two algorithms for parametric piecewise polynomial evaluation and generation are described. The mathematical development of these algorithms is shown to generalize to new algorithms for obtaining curve and surface intersections and for the computer display of parametric curves and surfaces
keywords	display, algorithms, intersection, CAD, computer graphics, B-splines, curved surfaces
series	CADline
last changed	2003/06/02 13:58

_id	244d
authors	Monedero, J., Casaus, A. and Coll, J.
year	1992
title	From Barcelona. Chronicle and Provisional Evaluation of a New Course on Architectural Solid Modelling by Computerized Means
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 351-362
doi	https://doi.org/10.52842/conf.ecaade.1992.351
summary	The first step made at the ETSAB in the computer field goes back to 1965, when professors Margarit and Buxade acquired an IBM computer, an electromechanical machine which used perforated cards and which was used to produce an innovative method of structural calculation. This method was incorporated in the academic courses and, at that time, this repeated question "should students learn programming?" was readily answered: the exercises required some knowledge of Fortran and every student needed this knowledge to do the exercises. This method, well known in Europe at that time, also provided a service for professional practice and marked the beginning of what is now the CC (Centro de Calculo) of our school. In 1980 the School bought a PDP1134, a computer which had 256 Kb of RAM, two disks of 5 Mb and one of lO Mb, and a multiplexor of 8 lines. Some time later the general politics of the UPC changed their course and this was related to the purchase of a VAX which is still the base of the CC and carries most of the administrative burden of the school. 1985 has probably been the first year in which we can talk of a general policy of the school directed towards computers. A report has been made that year, which includes an inquest adressed to the six Departments of the School (Graphic Expression, Projects, Structures, Construction, Composition and Urbanism) and that contains interesting data. According to the report, there were four departments which used computers in their current courses, while the two others (Projects and Composition) did not use them at all. The main user was the Department of Structures while the incidence of the remaining three was rather sporadic. The kind of problems detected in this report are very typical: lack of resources for hardware and software and for maintenance of the few computers that the school had at that moment; a demand (posed by the students) greatly exceeding the supply (computers and teachers). The main problem appeared to be the lack of computer graphic devices and proper software.
series	eCAADe
email
last changed	2022/06/07 07:58

_id	0565
authors	Oxman, Robert and Oxman, Rivka
year	1990
title	The Computability of Architectural Knowledge
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 171-185
summary	In an important contribution to the theoretical foundation of design computing, Mitchell noted "an increasingly urgent need to establish a demonstrably sound, comprehensive, rigorously formalized theoretical foundation upon which to base practical software development efforts" (Mitchell, 1986). In this paper we propose such a theoretical framework. A basic assumption of this work is that the advancement of design computing is dependent upon the emergence of a rigorous formulation of knowledge in design. We present a model of knowledge in architectural design which suggests a promising conceptual basis for dealing with knowledge in computer-aided design systems. We require models which can represent the formal knowledge and manipulative operations of the designer in all of their complexity-that is formal models rather than just geometric models. Shape Grammars (Stiny,1980) represent an example of such models, and constitute a relatively high level of design knowledge as compared to, for example, use of symmetry operations to generate simple formal configurations. Building upon an understanding of the classes of design knowledge as the conceptual basis for formal modeling systems may contribute a new realization of the potential of the medium for design. This will require a comprehensive approach to the definition of architectural and design knowledge. We consider here the implications of a well-defined body of architectural and design knowledge for design education and the potential mutual interaction-in a knowledge-rich environment-of design learning and CAAD learning. The computational factors connected with the representation of design knowledge and its integration in design systems are among the key problems of CAAD. Mitchell's model of knowledge in design incorporates formal knowledge in a comprehensive, multi-level, hierarchical structure in which types of knowledge are correlated with computational concepts. In the main focus of this paper we present a structured, multi-level model of design knowledge which we discuss with respect to current architectural theoretical considerations. Finally, we analyze the computational and educational relevance of such models.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	fc80
authors	Ubbelohde, S. and Humann, C.
year	1998
title	Comparative Evaluation of Four Daylighting Software Programs
source	1998 ACEEE Summer Study on Energy Efficiency in Buildings Proceedings. American Council for an Energy-Efficient Economy
summary	By the mid-1980's, a number of software packages were under development to predict daylighting performance in buildings, in particular illumination levels in daylighted spaces. An evaluation in 1988 by Ubbelohde et al. demonstrated that none of the software then available was capable of predicting the simplest of real daylighting designs. In the last ten years computer capabilities have evolved rapidly and we have four major packages widely available in the United States. This paper presents a comparative evaluation from the perspective of building and daylighting design practice. A contemporary building completed in 1993 was used as a base case for evaluation. We present the results from field measurements, software predictions and physical modeling as a basis for discussing the capabilities of the software packages in architectural design practice. We found the current software packages far more powerful and nuanced in their ability to predict daylight than previously. Some can accurately predict quantitative daylight performance under varying sky conditions and produce handsome and accurate visualizations of the space. The programs differ significantly, however, in their ease of use, modeling basis and the emphasis between quantitative predictions and visualization in the output.
series	other
last changed	2003/04/23 15:50

_id	0830
authors	Ball, A. A.
year	1980
title	How to Make the Bicubic Patch Work Using Reparametrisation
source	1980 ? 11 p. includes bibliography
summary	This paper comprises a series of examples in numerical surface definition, loosely strung together, to show the practical limitations of the bicubic patch and how they can be overcome by reparametrisation. The concept of reparametrisation is more general than that used in computer- aided geometric design insofar as the reparametrisation is modeled in addition to the basic parametric equation
keywords	CAD, computational geometry, curved surfaces, parametrization
series	CADline
last changed	2003/06/02 13:58

_id	2fdd
authors	Barsky, Brian A. and Thomas, Spencer W.
year	1980
title	Transpline Curve Representation System
source	April, 1980. 19 p. : ill. includes bibliography
summary	An interactive curve representation system has been developed based on the concept of transforming among several parametric spline curve formulations. The available formulations are the interpolatory spline, uniform B-spline, spline under tension, and NU-spline. The system implementation is described in the context of a sample design session
keywords	computational geometry, curves, representation, splines
series	CADline
last changed	2003/06/02 13:58

_id	8629
authors	Barzilay, Amos
year	1980
title	Human Problem Solving on Master Mind
source	Carnegie Mellon University
summary	The purpose of this work is to analyze the task of playing Master Mind and to examine subjects behaviors on solving that task. The methods and the ideas that are used in the work are the same found in the references for other tasks. The author wants to show that those ideas and methods can be used for that specific task as well. In other words, subjects behave in such a domain as an information processing system. [includes bibliography]
keywords	Psychology, Problem Solving
series	CADline
last changed	1999/02/15 15:10

_id	e825
authors	Baybars, Ilker and Eastman, Charles M.
year	1980
title	Enumerating Architectural Arrangements by Generating Their Underlying Graphs
source	Environment and Planning B. 1980. vol. 7: pp. 289- 310 : ill. includes bibliography. -- See also 'Enumerating Architectural Arrangements: Comment on a Recent Paper by Baybars and Eastman' by C.F. Earl
summary	One mathematical correspondence to the partitioning of the plane is a Weighted Plane Graph (WPG). This paper first focuses on the systematic generation of WPGs, in a fashion similar to crystal growth. During this process, the WPGs are represented by adjacency matrices. The authors, thus, present a method for embedding the WPG in the plane, given its adjacency matrix. These graphs can, then, be mapped into floor plans. The common practice here is the use of the `geometric dual' of a WPG. The authors propose, instead, the use of the `Pseudogeometric dual' of a WPG directly to translate (part of) a design brief into alternative spatial layouts. Also discussed is the ability to create courtyards and/or circulation spaces given a specific WPG, without increasing the size of the problem
keywords	enumeration, architecture, floor plans, graphs, design process, automation, algorithms, space allocation, CAD
series	CADline
email
last changed	2003/05/17 10:15

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	8a27
authors	Bentley, Jon L. and Carruthers, Wendy
year	1980
title	Algorithms for Testing the Inclusion of Points in Polygons
source	Allertorn Conference on Communication, Control and Computing (18th : 1980). (10) p. includes bibliography
summary	Determining whether a given point lies inside or outside a simple polygon is an important problem in many applications, including computer vision systems and computer-assisted political redistricting systems. In this paper the authors give algorithms for inclusion problems that are efficient for polygons that are 'close to convex' in a certain precise sense. An empirical study of polygons that arise in several applications shows that typical polygons are indeed 'close to convex,' and a program implementing the algorithm shows that is extremely efficient on point sets of practical sizes
keywords	point inclusion, polygons, algorithms, computational geometry
series	CADline
last changed	2003/06/02 13:58

_id	4580
authors	Borgerson, B. R. and Johnson, Robert H.
year	1980
title	Beyond CAD to Computer Aided Engineering
source	(8) p. : ill. Manufacturing Data Systems Incorporated, 1980? includes bibliography
summary	Current CAD systems significantly aid the drafting function and many provide some aid to selected design activities. For the development of mechanical systems, much more can be done. Future systems will aid the interactive engineering process of design, analysis, control, documentation, and manufacturing engineering. Computer based systems which address this broader spectrum of engineering activities are referred to as `Computer Aided Engineering,' or `CAE,' systems. CAE systems will use volumetric techniques to create and evaluate the individual components of a machine design in conjunction with data base management schemas to support the interrelationships of the components of machines. This paper focuses on computer assistance to the engineering of mechanical systems
keywords	mechanical engineering, CAE, solid modeling, objects
series	CADline
last changed	2003/06/02 13:58

_id	0105
authors	Bossan, Mario and Ronchi, Alfredo M.
year	1989
title	Presentazione Esperienza Didattica del Dipartimento di Ingegneria dei Sistemi Edilizi e Territoriali - Politecnico di Milano
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.8.1-9.8.19
doi	https://doi.org/10.52842/conf.ecaade.1989.x.x4i
summary	Didactic and research experience developed at the "Dipartimento di Ingegneria dei Sistemi Edilizi e Territoriali del Politecnico di Milano" in the environment of Computer Aided Architectural Design (CAAD). From the early part of the 1980's, using initially at an experimental level the resources available at the departmental centre of calculation various applications of CAD techniques in the building sector have been effected at DISET (Dipartimento di Ingegneria del Politecnico di Milano). During 1983, after a three year period of experimenting with these systems, it was decided to organise and activate a small computer aided design centre, within the department, the use of which was reserved for dissertation and research students.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	8593
authors	Braid, I.C.
year	1980
title	Superficial Blends in Geometric Modelling
source	12 p. : ill. February, 1980. Document No. 105. includes bibliography
summary	In engineering practice, many blended surfaces are both indicated and manufactured by rounding off a sharp edge. The authors term them `superficial' blends in contrast to `designed' blends for which existing surface techniques are appropriate. The provision of superficial blends in a geometric modeling system is explained, and a method is given for drawing objects containing blended edges
keywords	geometric modeling, CAD, representation, solids
series	CADline
last changed	2003/06/02 13:58

For more results click below: