Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 80

Reformat results as: short short into frame detailed detailed into frame

_id	2ddb
authors	Davies, R.S.
year	1980
title	A Review of Computer Techniques for Representation of Geometry
source	1980? pp. 213-225 : ill. includes bibliography
summary	The primary role of the computer in the design process is to provide a means of recording the design, and subsequently of extracting information from the record. The choice of technique for recording geometry depends on the characteristics of the component and the nature of the information subsequently required about it. This paper reviews the principal techniques currently in use with particular emphasis on these two aspects
keywords	CAD, curves, representation, geometric modeling, techniques
series	CADline
last changed	2003/06/02 13:58

_id	0830
authors	Ball, A. A.
year	1980
title	How to Make the Bicubic Patch Work Using Reparametrisation
source	1980 ? 11 p. includes bibliography
summary	This paper comprises a series of examples in numerical surface definition, loosely strung together, to show the practical limitations of the bicubic patch and how they can be overcome by reparametrisation. The concept of reparametrisation is more general than that used in computer- aided geometric design insofar as the reparametrisation is modeled in addition to the basic parametric equation
keywords	CAD, computational geometry, curved surfaces, parametrization
series	CADline
last changed	2003/06/02 13:58

_id	2fdd
authors	Barsky, Brian A. and Thomas, Spencer W.
year	1980
title	Transpline Curve Representation System
source	April, 1980. 19 p. : ill. includes bibliography
summary	An interactive curve representation system has been developed based on the concept of transforming among several parametric spline curve formulations. The available formulations are the interpolatory spline, uniform B-spline, spline under tension, and NU-spline. The system implementation is described in the context of a sample design session
keywords	computational geometry, curves, representation, splines
series	CADline
last changed	2003/06/02 13:58

_id	8a27
authors	Bentley, Jon L. and Carruthers, Wendy
year	1980
title	Algorithms for Testing the Inclusion of Points in Polygons
source	Allertorn Conference on Communication, Control and Computing (18th : 1980). (10) p. includes bibliography
summary	Determining whether a given point lies inside or outside a simple polygon is an important problem in many applications, including computer vision systems and computer-assisted political redistricting systems. In this paper the authors give algorithms for inclusion problems that are efficient for polygons that are 'close to convex' in a certain precise sense. An empirical study of polygons that arise in several applications shows that typical polygons are indeed 'close to convex,' and a program implementing the algorithm shows that is extremely efficient on point sets of practical sizes
keywords	point inclusion, polygons, algorithms, computational geometry
series	CADline
last changed	2003/06/02 13:58

_id	e2a9
authors	Carpenter, Loren
year	1980
title	Computer Rendering of Fractal Curves and Surfaces
source	Computer Graphics: SIGGRAPH Proceedings, Vol 14, no 3 (supplement), July 1980, pp 9-
summary	Fractals are a class of highly irregular shapes that have myriad counterparts in the real world, such as islands, river networks, turbulence, and snowflakes. Classic fractals include Brownian paths, Cantor sets, and plane-filling curves. Nearly all fractal sets are of fractional dimension and all are nowhere differentiable. Previously published procedures for calculating fractal curves employ shear displacement processes, modified Markov processes, and inverse Fourier transforms. They are either very expensive or very complex and do not easily generalize to surfaces. This paper presents a family of simple methods for generating and displaying a wide class of fractal curves and surfaces. In so doing, it introduces the concept of statistical subdivision in which a geometric entity is split into smaller entities while preserving certain statistical properties.
series	journal paper
last changed	2003/04/23 15:14

_id	a587
authors	Cohen, Elaine, Lyche, Tom and Riesenfeld, Richard F.
year	1980
title	Discrete B-Splines and Subdivision Techniques in Computer-Aided Geometric Design and Computer Graphics
source	computer Graphics and Image Processing. October, 1980. vol. 14: pp. 87- 111 : ill. includes bibliography
summary	The relevant theory of discrete B-splines with associated new algorithms is extended to provide a framework for understanding and implementing general subdivision schemes for nonuniform B-splines. The new derived polygon corresponding to an arbitrary refinement of the knot vector for an existing B-spline curve, including multiplicities, is shown to be formed by successive evaluations of the discrete B-spline defined by the original vertices, the original knot vector, and the refined knot vector. Existing subdivision algorithms can be seen as proper special cases. General subdivision has widespread applications in computer-aided geometric design, computer graphics, and numerical analysis. The new algorithms resulting from the new theory lead to a unification of the display model, the analysis model, and other needed models into a single geometric model from which other necessary models are easily derived. New sample algorithms for interference calculation, contouring, surface rendering, and other important calculations are presented
keywords	computational geometry, theory, algorithms, computer graphics, B-splines, curved surfaces
series	CADline
last changed	2003/06/02 13:58

_id	c444
authors	Forrest, Robin A.
year	1980
title	The Twisted Cubic Curve : A Computer-Aided Geometric Design Approach
source	Computer Aided Design. July, 1980. vol. 12: pp. 165-172 : ill. includes bibliography
summary	The twisted cubic curve has the attraction of combining both commonly used curve definitions, the conic section and the parametric cubic, in a single form. A definition of the twisted cubic is developed in terms of geometric `handles' convenient for CAD and independent of parametrization, analogous to a well-known definition of conics. Conditions for the occurrence of asymptotes are investigated and shown to be considerably more complex than those for conics. Several more controllable subsets of the general curve are described. The paper concludes that use of the full generality of the twisted cubic is in most cases unjustified
keywords	computational geometry, curves, CAD, parametrization
series	CADline
last changed	2003/06/02 13:58

_id	b04c
authors	Goerger, S., Darken, R., Boyd, M., Gagnon, T., Liles, S., Sullivan, J. and Lawson, J.
year	1996
title	Spatial Knowledge Acquisition from Maps and Virtual Environments in Complex Architectural Space
source	Proc. 16 th Applied Behavioral Sciences Symposium, 22-23 April, U.S. Airforce Academy, Colorado Springs, CO., 1996, 6-10
summary	It has often been suggested that due to its inherent spatial nature, a virtual environment (VE) might be a powerful tool for spatial knowledge acquisition of a real environment, as opposed to the use of maps or some other two-dimensional, symbolic medium. While interesting from a psychological point of view, a study of the use of a VE in lieu of a map seems nonsensical from a practical point of view. Why would the use of a VE preclude the use of a map? The more interesting investigation would be of the value added of the VE when used with a map. If the VE could be shown to substantially improve navigation performance, then there might be a case for its use as a training tool. If not, then we have to assume that maps continue to be the best spatial knowledge acquisition tool available. An experiment was conducted at the Naval Postgraduate School to determine if the use of an interactive, three-dimensional virtual environment would enhance spatial knowledge acquisition of a complex architectural space when used in conjunction with floor plan diagrams. There has been significant interest in this research area of late. Witmer, Bailey, and Knerr (1995) showed that a VE was useful in acquiring route knowledge of a complex building. Route knowledge is defined as the procedural knowledge required to successfully traverse paths between distant locations (Golledge, 1991). Configurational (or survey) knowledge is the highest level of spatial knowledge and represents a map-like internal encoding of the environment (Thorndyke, 1980). The Witmer study could not confirm if configurational knowledge was being acquired. Also, no comparison was made to a map-only condition, which we felt is the most obvious alternative. Comparisons were made only to a real world condition and a symbolic condition where the route is presented verbally.
series	other
last changed	2003/04/23 15:50

_id	ga9809
id	ga9809
authors	Kälviäinen, Mirja
year	1998
title	The ideological basis of generative expression in design
source	International Conference on Generative Art
summary	This paper will discuss issues concerning the design ideology supporting the use and development of generative design. This design ideology is based on the unique qualities of craft production and on the forms or ideas from nature or the natural characteristics of materials. The main ideology presented here is the ideology of the 1980´s art craft production in Finland. It is connected with the general Finnish design ideology and with the design ideology of other western countries. The ideology for these professions is based on the common background of design principles stated in 19th century England. The early principles developed through the Arts and Crafts tradition which had a great impact on design thinking in Europe and in the United States. The strong continuity of this design ideology from 19th century England to the present computerized age can be detected. The application of these design principles through different eras shows the difference in the interpretations and in the permission of natural decorative forms. The ideology of the 1980ïs art craft in Finland supports the ideas and fulfilment of generative design in many ways. The reasons often given as the basis for making generative design with computers are in very many respects the same as the ideology for art craft. In Finland there is a strong connection between art craft and design ideology. The characteristics of craft have often been seen as the basis for industrial design skills. The main themes in the ideology of the 1980´s art craft in Finland can be compared to the ideas of generative design. The main issues in which the generative approach reflects a distinctive ideological thinking are: Way of Life: The work is the communication of the maker´s inner ideas. The concrete relationship with the environment, personality, uniqueness, communication, visionary qualities, development and growth of the maker are important. The experiments serve as a media for learning. Taste and Aesthetic Education: The real love affair is created by the non living object with the help of memories and thought. At their best objects create the basis in their stability and communication for durable human relationships. People have warm relationships especially with handmade products in which they can detect unique qualities and the feeling that the product has been made solely for them. Counter-culture: The aim of the work is to produce alternatives for technoburocracy and mechanical production and to bring subjective and unique experiences into the customerïs monotonious life. This ideology rejects the usual standardized mass production of our times. Mythical character: There is a metamorphosis in the birth of the product. In many ways the design process is about birth and growth. The creative process is a development story of the maker. The complexity of communication is the expression of the moments that have been lived. If you can sense the process of making in the product it makes it more real and nearer to life. Each piece of wood has its own beauty. Before you can work with it you must find the deep soul of its quality. The distinctive traits of the material, technique and the object are an essential part of the metamorphosis which brings the product into life. The form is not only for formïs sake but for other purposes, too. You cannot find loose forms in nature. Products have their beginnings in the material and are a part of the nature. This art craft ideology that supports the ideas of generative design can be applied either to the hand made crafts production or to the production exploiting new technology. The unique characteristics of craft and the expression of the material based development are a way to broaden the expression and forms of industrial products. However, for a crafts person it is not meaningful to fill the world with objects. In generative, computer based production this is possible. But maybe the production of unique pieces is still slower and makes the industrial production in that sense more ecological. People will be more attached to personal and unique objects, and thus the life cycle of the objects produced will be longer.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	67c9
authors	Lipski, Witold Jr. and Preparata, Franco P.
year	1980
title	Finding the Contour of a Union of Iso-Oriented Rectangles
source	Journal of Algorithms. Academic Press Inc., January, 1980. pp. 235-246 : some ill. a short bibliography
summary	In this paper the following geometric problem is considered. Let R1,...,Rm be rectangles on the plane with sides parallel to the coordinate axes. An algorithm is described for finding the contour of F = R1, U...U Rm, in O(m log m+p log(2m2/p)) time, where p is the number of edges in the contour. This is O(m2) in the general case, and o(m log m) when F is without holes (then p < 8m - 4); both of these performances are optimal
keywords	rectangles, geometry, computational geometry, algorithms
series	CADline
last changed	2003/06/02 10:24

_id	cdc2008_243
id	cdc2008_243
authors	Loukissas, Yanni
year	2008
title	Keepers of the Geometry: Architects in a Culture of Simulation
source	First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 243-244
summary	“Why do we have to change? We’ve been building buildings for years without CATIA?” Roger Norfleet, a practicing architect in his thirties poses this question to Tim Quix, a generation older and an expert in CATIA, a computer-aided design tool developed by Dassault Systemes in the early 1980’s for use by aerospace engineers. It is 2005 and CATIA has just come into use at Paul Morris Associates, the thirty-person architecture firm where Norfleet works; he is struggling with what it will mean for him, for his firm, for his profession. Computer-aided design is about creativity, but also about jurisdiction, about who controls the design process. In Architecture: The Story of Practice, Architectural theorist Dana Cuff writes that each generation of architects is educated to understand what constitutes a creative act and who in the system of their profession is empowered to use it and at what time. Creativity is socially constructed and Norfleet is coming of age as an architect in a time of technological but also social transition. He must come to terms with the increasingly complex computeraided design tools that have changed both creativity and the rules by which it can operate. In today’s practices, architects use computer-aided design software to produce threedimensional geometric models. Sometimes they use off-the-shelf commercial software like CATIA, sometimes they customize this software through plug-ins and macros, sometimes they work with software that they have themselves programmed. And yet, conforming to Larson’s ideas that they claim the higher ground by identifying with art and not with science, contemporary architects do not often use the term “simulation.” Rather, they have held onto traditional terms such as “modeling” to describe the buzz of new activity with digital technology. But whether or not they use the term, simulation is creating new architectural identities and transforming relationships among a range of design collaborators: masters and apprentices, students and teachers, technical experts and virtuoso programmers. These days, constructing an identity as an architect requires that one define oneself in relation to simulation. Case studies, primarily from two architectural firms, illustrate the transformation of traditional relationships, in particular that of master and apprentice, and the emergence of new roles, including a new professional identity, “keeper of the geometry,” defined by the fusion of person and machine. Like any profession, architecture may be seen as a system in flux. However, with their new roles and relationships, architects are learning that the fight for professional jurisdiction is increasingly for jurisdiction over simulation. Computer-aided design is changing professional patterns of production in architecture, the very way in which professionals compete with each other by making new claims to knowledge. Even today, employees at Paul Morris squabble about the role that simulation software should play in the office. Among other things, they fight about the role it should play in promotion and firm hierarchy. They bicker about the selection of new simulation software, knowing that choosing software implies greater power for those who are expert in it. Architects and their collaborators are in a continual struggle to define the creative roles that can bring them professional acceptance and greater control over design. New technologies for computer-aided design do not change this reality, they become players in it.
email
last changed	2009/01/07 08:05

_id	ede1
authors	Pal, T. K.
year	1980
title	Hybrid Surface Patch
source	Computer Aided Design November, 1980. vol. 12: pp. 283-287 : ill.
summary	A method for designing a surface patch, with direct and easy to understand control over the shape is presented. Slope continuity across the boundary is assured and the boundary curve may have any number of discontinuities
keywords	computational geometry, geometric modeling, curved surfaces, algorithms
series	CADline
last changed	2003/06/02 13:58

_id	08ba
authors	Requicha, Aristides A.G.
year	1980
title	Representations for Rigid Solids : Theory, Methods, and Systems
source	Computing Surveys December, 1980. vol. 12: pp. 437-464 : ill. includes bibliography.
summary	Computer-based systems for modeling the geometry of rigid solid objects are becoming increasingly important in mechanical and civil engineering, architecture, computer graphics, computer vision, and other fields that deal with spatial phenomena. At the heart of such systems are symbol structures (representations) designating 'abstract solids' (subsets of Euclidean space) that model physical solids. Representations are the sources of data for procedures which compute useful properties of objects. The variety and uses of systems embodying representations of solids are growing rapidly, but so are the difficulties in assessing current designs, specifying the characteristics that future systems should exhibit, and designing systems to meet such specifications. This paper resolves many of these difficulties by providing a coherent view, based on sound theoretical principles, of what is presently known about the representation of solids. The paper is divided into three parts. The first introduces a simple mathematical framework for characterizing certain important aspects of representations, for example, their semantic (geometric) integrity. The second part uses the framework to describe and compare all of the major known schemes for representing solids. The third part briefly surveys extant geometric modeling systems and then applies the concepts developed in the paper to the high-level design of a multiple- representation geometric modeling system which exhibits a level of reliability and versatility superior to that of systems currently used in industrial computer-aided design and manufacturing
keywords	CAD, CAM, computational geometry, geometric modeling, representation,CSG, B-rep
series	CADline
last changed	2003/06/02 13:58

_id	eea9
authors	Weiler, Kevin
year	1980
title	Polygon Comparison Using a Graph Representation
source	SIGGRAPH '80 Conference Proceedings July, 1980. vol. 14 ;no. 3: pp. 10-18 : ill. includes bibliography.
summary	All of the information necessary to perform the polygon set operations (union, intersection, and difference) and therefore polygon clipping can be generated by a single application of a process called polygon comparison. This process accepts two or more input polygons and generates one or more polygons as output. These output polygons contain unique homogenous areas, each falling within the domain of one or more input polygons. Each output polygon is classified by the list of input polygons in which its area may be found. The union contour of all input is also generated, completing all of the information necessary to perform the polygon set operations. This paper introduces a polygon comparison algorithm which features reduced complexity due to its use of a graph data representation. The paper briefly introduces some of the possible approaches to the general problem of polygon comparison including the polygon set and clipping problems. The new algorithm is then introduced and explained in detail. The algorithm is sufficiently general to compare sets of concave polygons with holes. More than two polygons can be compared at one time; all information for future comparisons of subsets of the original input polygon sets is available from the results of the initial application of the process. The algorithm represents polygons using a graph of the boundaries of the polygons. These graphs are imbedded in a two dimensional geometric space. The use of the graph representation simplifies the comparison process considerably by eliminating many special cases from explicit consideration. Polygon operations like the ones described above are useful in a variety of application areas, especially those which deal with problems involving two dimensional or projected two dimensional geometric areas. Examples include VLSI circuit design, cartographic and demographic applications, and polygon clipping for graphic applications such as viewport clipping, hidden surface and line removal, detailing, and shadowing
keywords	boolean operations, clipping, graphs, polygons, computational geometry, algorithms
series	CADline
last changed	1999/02/12 15:10

_id	cf2011_p170
id	cf2011_p170
authors	Barros, Mário; Duarte José, Chaparro Bruno
year	2011
title	Thonet Chairs Design Grammar: a Step Towards the Mass Customization of Furniture
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 181-200.
summary	The paper presents the first phase of research currently under development that is focused on encoding Thonet design style into a generative design system using a shape grammar. The ultimate goal of the work is the design and production of customizable chairs using computer assisted tools, establishing a feasible practical model of the paradigm of mass customization (Davis, 1987). The current research step encompasses the following three steps: (1) codification of the rules describing Thonet design style into a shape grammar; (2) implementing the grammar into a computer tool as parametric design; and (3) rapid prototyping of customized chair designs within the style. Future phases will address the transformation of the Thonet’s grammar to create a new style and the production of real chair designs in this style using computer aided manufacturing. Beginning in the 1830’s, Austrian furniture designer Michael Thonet began experimenting with forming steam beech, in order to produce lighter furniture using fewer components, when compared with the standards of the time. Using the same construction principles and standardized elements, Thonet produced different chairs designs with a strong formal resemblance, creating his own design language. The kit assembly principle, the reduced number of elements, industrial efficiency, and the modular approach to furniture design as a system of interchangeable elements that may be used to assemble different objects enable him to become a pioneer of mass production (Noblet, 1993). The most paradigmatic example of the described vision of furniture design is the chair No. 14 produced in 1858, composed of six structural elements. Due to its simplicity, lightness, ability to be stored in flat and cubic packaging for individual of collective transportation, respectively, No. 14 became one of the most sold chairs worldwide, and it is still in production nowadays. Iconic examples of mass production are formally studied to provide insights to mass customization studies. The study of the shape grammar for the generation of Thonet chairs aimed to ensure rules that would make possible the reproduction of the selected corpus, as well as allow for the generation of new chairs within the developed grammar. Due to the wide variety of Thonet chairs, six chairs were randomly chosen to infer the grammar and then this was fine tuned by checking whether it could account for the generation of other designs not in the original corpus. Shape grammars (Stiny and Gips, 1972) have been used with sucesss both in the analysis as in the synthesis of designs at different scales, from product design to building and urban design. In particular, the use of shape grammars has been efficient in the characterization of objects’ styles and in the generation of new designs within the analyzed style, and it makes design rules amenable to computers implementation (Duarte, 2005). The literature includes one other example of a grammar for chair design by Knight (1980). In the second step of the current research phase, the outlined shape grammar was implemented into a computer program, to assist the designer in conceiving and producing customized chairs using a digital design process. This implementation was developed in Catia by converting the grammar into an equivalent parametric design model. In the third phase, physical models of existing and new chair designs were produced using rapid prototyping. The paper describes the grammar, its computer implementation as a parametric model, and the rapid prototyping of physical models. The generative potential of the proposed digital process is discussed in the context of enabling the mass customization of furniture. The role of the furniture designer in the new paradigm and ideas for further work also are discussed.
keywords	Thonet; furniture design; chair; digital design process; parametric design; shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	a24e
authors	Barstow, David R.
year	1980
title	Knowledge Based Program Construction
source	The Computer Science Library, 34 p.
summary	Some aspects of the implementation of the reachability algorithm are presented.
keywords	Knowledge Base, Programming, Graphs, LISP
series	CADline
last changed	1999/02/15 14:58

_id	8629
authors	Barzilay, Amos
year	1980
title	Human Problem Solving on Master Mind
source	Carnegie Mellon University
summary	The purpose of this work is to analyze the task of playing Master Mind and to examine subjects behaviors on solving that task. The methods and the ideas that are used in the work are the same found in the references for other tasks. The author wants to show that those ideas and methods can be used for that specific task as well. In other words, subjects behave in such a domain as an information processing system. [includes bibliography]
keywords	Psychology, Problem Solving
series	CADline
last changed	1999/02/15 15:10

_id	e825
authors	Baybars, Ilker and Eastman, Charles M.
year	1980
title	Enumerating Architectural Arrangements by Generating Their Underlying Graphs
source	Environment and Planning B. 1980. vol. 7: pp. 289- 310 : ill. includes bibliography. -- See also 'Enumerating Architectural Arrangements: Comment on a Recent Paper by Baybars and Eastman' by C.F. Earl
summary	One mathematical correspondence to the partitioning of the plane is a Weighted Plane Graph (WPG). This paper first focuses on the systematic generation of WPGs, in a fashion similar to crystal growth. During this process, the WPGs are represented by adjacency matrices. The authors, thus, present a method for embedding the WPG in the plane, given its adjacency matrix. These graphs can, then, be mapped into floor plans. The common practice here is the use of the `geometric dual' of a WPG. The authors propose, instead, the use of the `Pseudogeometric dual' of a WPG directly to translate (part of) a design brief into alternative spatial layouts. Also discussed is the ability to create courtyards and/or circulation spaces given a specific WPG, without increasing the size of the problem
keywords	enumeration, architecture, floor plans, graphs, design process, automation, algorithms, space allocation, CAD
series	CADline
email
last changed	2003/05/17 10:15

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	241c
authors	Boehm, Wolfgang
year	1980
title	Inserting New Knots into B-spline Curves
source	IPC Business Press. July, 1980. vol. 12: pp. 199-201 : ill. includes bibliography
summary	For some applications, further subdivision of a segment of a B-spline curve or B-spline surface is desirable. This paper provides an algorithm for this. The structure is similar to de Boor's algorithm for the calculation of a point on a curve. An application of the subdivision is illustrated
keywords	algorithms, B-splines, curves, curved surfaces
series	CADline
last changed	1999/02/12 15:07

For more results click below: