Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 78

Reformat results as: short short into frame detailed detailed into frame

_id	cf2011_p170
id	cf2011_p170
authors	Barros, Mário; Duarte José, Chaparro Bruno
year	2011
title	Thonet Chairs Design Grammar: a Step Towards the Mass Customization of Furniture
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 181-200.
summary	The paper presents the first phase of research currently under development that is focused on encoding Thonet design style into a generative design system using a shape grammar. The ultimate goal of the work is the design and production of customizable chairs using computer assisted tools, establishing a feasible practical model of the paradigm of mass customization (Davis, 1987). The current research step encompasses the following three steps: (1) codification of the rules describing Thonet design style into a shape grammar; (2) implementing the grammar into a computer tool as parametric design; and (3) rapid prototyping of customized chair designs within the style. Future phases will address the transformation of the Thonet’s grammar to create a new style and the production of real chair designs in this style using computer aided manufacturing. Beginning in the 1830’s, Austrian furniture designer Michael Thonet began experimenting with forming steam beech, in order to produce lighter furniture using fewer components, when compared with the standards of the time. Using the same construction principles and standardized elements, Thonet produced different chairs designs with a strong formal resemblance, creating his own design language. The kit assembly principle, the reduced number of elements, industrial efficiency, and the modular approach to furniture design as a system of interchangeable elements that may be used to assemble different objects enable him to become a pioneer of mass production (Noblet, 1993). The most paradigmatic example of the described vision of furniture design is the chair No. 14 produced in 1858, composed of six structural elements. Due to its simplicity, lightness, ability to be stored in flat and cubic packaging for individual of collective transportation, respectively, No. 14 became one of the most sold chairs worldwide, and it is still in production nowadays. Iconic examples of mass production are formally studied to provide insights to mass customization studies. The study of the shape grammar for the generation of Thonet chairs aimed to ensure rules that would make possible the reproduction of the selected corpus, as well as allow for the generation of new chairs within the developed grammar. Due to the wide variety of Thonet chairs, six chairs were randomly chosen to infer the grammar and then this was fine tuned by checking whether it could account for the generation of other designs not in the original corpus. Shape grammars (Stiny and Gips, 1972) have been used with sucesss both in the analysis as in the synthesis of designs at different scales, from product design to building and urban design. In particular, the use of shape grammars has been efficient in the characterization of objects’ styles and in the generation of new designs within the analyzed style, and it makes design rules amenable to computers implementation (Duarte, 2005). The literature includes one other example of a grammar for chair design by Knight (1980). In the second step of the current research phase, the outlined shape grammar was implemented into a computer program, to assist the designer in conceiving and producing customized chairs using a digital design process. This implementation was developed in Catia by converting the grammar into an equivalent parametric design model. In the third phase, physical models of existing and new chair designs were produced using rapid prototyping. The paper describes the grammar, its computer implementation as a parametric model, and the rapid prototyping of physical models. The generative potential of the proposed digital process is discussed in the context of enabling the mass customization of furniture. The role of the furniture designer in the new paradigm and ideas for further work also are discussed.
keywords	Thonet; furniture design; chair; digital design process; parametric design; shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ddss2004_ra-33
id	ddss2004_ra-33
authors	Diappi, L., P. Bolchim, and M. Buscema
year	2004
title	Improved Understanding of Urban Sprawl Using Neural Networks
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 14020-2408-8, p. 33-49
summary	It is widely accepted that the spatial pattern of settlements is a crucial factor affecting quality of life and environmental sustainability, but few recent studies have attempted to examine the phenomenon of sprawl by modelling the process rather than adopting a descriptive approach. The issue was partly addressed by models of land use and transportation which were mainly developed in the UK and US in the 1970s and 1980s, but the major advances were made in the area of modelling transportation, while very little was achieved in the area of spatial and temporal land use. Models of land use and transportation are well-established tools, based on explicit, exogenouslyformulated rules within a theoretical framework. The new approaches of artificial intelligence, and in particular, systems involving parallel processing, (Neural Networks, Cellular Automata and Multi-Agent Systems) defined by the expression “Neurocomputing”, allow problems to be approached in the reverse, bottom-up, direction by discovering rules, relationships and scenarios from a database. In this article we examine the hypothesis that territorial micro-transformations occur according to a local logic, i.e. according to use, accessibility, the presence of services and conditions of centrality, periphericity or isolation of each territorial “cell” relative to its surroundings. The prediction capabilities of different architectures of supervised Neural networks are implemented to the south Metropolitan area of Milan at two different temporal thresholds and discussed. Starting from data on land use in 1980 and 1994 and by subdividing the area into square cells on an orthogonal grid, the model produces a spatial and functional map of urbanisation in 2008. An implementation of the SOM (Self Organizing Map) processing to the Data Base allows the typologies of transformation to be identified, i.e. the classes of area which are transformed in the same way and which give rise to territorial morphologies; this is an interesting by-product of the approach.
keywords	Neural Networks, Self-Organizing Maps, Land-Use Dynamics, Supervised Networks
series	DDSS
last changed	2004/07/03 22:13

_id	ga9809
id	ga9809
authors	Kälviäinen, Mirja
year	1998
title	The ideological basis of generative expression in design
source	International Conference on Generative Art
summary	This paper will discuss issues concerning the design ideology supporting the use and development of generative design. This design ideology is based on the unique qualities of craft production and on the forms or ideas from nature or the natural characteristics of materials. The main ideology presented here is the ideology of the 1980´s art craft production in Finland. It is connected with the general Finnish design ideology and with the design ideology of other western countries. The ideology for these professions is based on the common background of design principles stated in 19th century England. The early principles developed through the Arts and Crafts tradition which had a great impact on design thinking in Europe and in the United States. The strong continuity of this design ideology from 19th century England to the present computerized age can be detected. The application of these design principles through different eras shows the difference in the interpretations and in the permission of natural decorative forms. The ideology of the 1980ïs art craft in Finland supports the ideas and fulfilment of generative design in many ways. The reasons often given as the basis for making generative design with computers are in very many respects the same as the ideology for art craft. In Finland there is a strong connection between art craft and design ideology. The characteristics of craft have often been seen as the basis for industrial design skills. The main themes in the ideology of the 1980´s art craft in Finland can be compared to the ideas of generative design. The main issues in which the generative approach reflects a distinctive ideological thinking are: Way of Life: The work is the communication of the maker´s inner ideas. The concrete relationship with the environment, personality, uniqueness, communication, visionary qualities, development and growth of the maker are important. The experiments serve as a media for learning. Taste and Aesthetic Education: The real love affair is created by the non living object with the help of memories and thought. At their best objects create the basis in their stability and communication for durable human relationships. People have warm relationships especially with handmade products in which they can detect unique qualities and the feeling that the product has been made solely for them. Counter-culture: The aim of the work is to produce alternatives for technoburocracy and mechanical production and to bring subjective and unique experiences into the customerïs monotonious life. This ideology rejects the usual standardized mass production of our times. Mythical character: There is a metamorphosis in the birth of the product. In many ways the design process is about birth and growth. The creative process is a development story of the maker. The complexity of communication is the expression of the moments that have been lived. If you can sense the process of making in the product it makes it more real and nearer to life. Each piece of wood has its own beauty. Before you can work with it you must find the deep soul of its quality. The distinctive traits of the material, technique and the object are an essential part of the metamorphosis which brings the product into life. The form is not only for formïs sake but for other purposes, too. You cannot find loose forms in nature. Products have their beginnings in the material and are a part of the nature. This art craft ideology that supports the ideas of generative design can be applied either to the hand made crafts production or to the production exploiting new technology. The unique characteristics of craft and the expression of the material based development are a way to broaden the expression and forms of industrial products. However, for a crafts person it is not meaningful to fill the world with objects. In generative, computer based production this is possible. But maybe the production of unique pieces is still slower and makes the industrial production in that sense more ecological. People will be more attached to personal and unique objects, and thus the life cycle of the objects produced will be longer.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	c380
authors	Saaty, Thomas L. and Beltran, Miguel H.
year	1980
title	Architectural Design by the Analytic Hierarchy Process
source	Design Methods and Theories. 1980? vol. 14: pp. 124-134 : ill. and tables. include some bibliographical notes
summary	The Analytic Hierarchy Process (AHP), which is explained and applied in another article in the same journal, is used to illustrate the architectural design of a house for a family of three. The plan of the house was develop to satisfy the family's needs by considering the size of the lot, the size and shape of the different architectural spaces, their priorities, and their overall contiguity. The salient feature of this paper is to show how closely the final plan, shape, size, geometric design and location relate to our mental criteria and personal needs, from the identification of the needs to the final plan. This approach also permits one to treat all these needs and their relation to the environment in a coherent framework
keywords	architecture, design, methods
series	CADline
last changed	2003/06/02 13:58

_id	8629
authors	Barzilay, Amos
year	1980
title	Human Problem Solving on Master Mind
source	Carnegie Mellon University
summary	The purpose of this work is to analyze the task of playing Master Mind and to examine subjects behaviors on solving that task. The methods and the ideas that are used in the work are the same found in the references for other tasks. The author wants to show that those ideas and methods can be used for that specific task as well. In other words, subjects behave in such a domain as an information processing system. [includes bibliography]
keywords	Psychology, Problem Solving
series	CADline
last changed	1999/02/15 15:10

_id	7f71
authors	De Landa, Manuel
year	1998
title	Meshworks, Hierarchies and Interfaces
source	Virtual Dimension Ed. Beckmann, J., Princeton Architectural Press, NewYork
summary	The world of interface design is today undergoing dramatic changes which in their impact promise to rival those brought about by the use of the point-and-click graphical interfaces popularized by the Macintosh in the early 1980's. The new concepts and metaphors which are aiming to replace the familiar desk-top metaphor all revolve around the notion of semi-autonomous, semi-intelligent software agents. To be sure, different researchers and commercial companies have divergent conceptions of what these agents should be capable of, and how they should interact with computer users. But whether one aims to give these software creatures the ability to learn about the users habits, as in the non-commercial research performed at MIT autonomous agents group, or to endow them with the ability to perform transactions in the users name, as in the commercial products pioneered by General Magic, the basic thrust seems to be in the direction of giving software programs more autonomy in their decision-making capabilities.
series	other
last changed	2003/04/23 15:50

_id	6a59
authors	Franklin, Randolph
year	1980
title	A Linear Time Exact Hidden Surface Algorithm
source	SIGGRAPH '80 Conference Proceedings. July, 1980. vol. 14 ; no. 3: pp. 117-133 : ill. includes bibliography
summary	This Paper presents a new hidden surface algorithm. Its output is the set of the visible pieces of edges and faces, and is as accurate as the arithmetic precision of the computer. Thus calculating the hidden surfaces for a higher resolution device takes no more time. If the faces are independently and identically distributed, then the execution time is linear in the number of faces. In particular, the execution time does not increase with the depth complexity. This algorithm overlays a grid on the screen whose fineness depends on the number and size of the faces. Edges and faces are sorted into grid cells. Only objects in the same cell can intersect or hide each other. Also, if a face completely covers a cell then nothing behind it in the cell is relevant. Three programs have tested this algorithm. The first verified the variable grid concept on 50,000 intersecting edges. The second verified the linear time, fast speed, and irrelevance of depth complexity for hidden lines on 10,000 spheres. This also tested depth complexities up to 30, and showed that perspective scenes with the farther objects smaller are even faster to calculate. The third verified this for hidden surfaces on 3,000 squares
keywords	hidden surfaces, algorithms, hidden lines, variables, grids, computer graphics, programming
series	CADline
last changed	2003/06/02 13:58

_id	b190
authors	Goldberg, Adele and Robson, David
year	1983
title	Smalltalk-80: The language and its implementation
source	New York, NY: Addison Wesley Co
summary	Smalltalk-80 is the classic standard Smalltalk language as described in Smalltalk-80: The Language and Its Implementation by Goldberg and Robson. This book is commonly called "the Blue Book". Squeak implements the dialect of Smalltalk described in this book, but has a different implementation. Overview of the Smalltalk Language Smalltalk is a general purpose, high level programming language. It was the first original "pure" object oriented language, but not the first to use the object oriented concept, which is credited to Simula 67. The explosive growth of Object Oriented Programming (OOP) technologies began in the early 1980's, with Smalltalk's introduction. Behind it was the idea that the individual human user should be the most important component of any computing system, and that programming should be a natural extension of thinking, and also a dynamic and evolutionary process consistent with the model of human learning activity. In Smalltalk, these ideas are embodied in a framework for human-computer communication. In a sense, Smalltalk is yet another language like C and Pascal, and programs can be written in Smalltalk that have the look and feel of such conventional languages. The difference lies * in the amount of code that can be reduced, * less cryptic syntax, * and code that is easier to handle for application maintenance and enhancement. But Smalltalk's most powerful feature is easy code reuse. Smalltalk makes reuse of programs, routines, and subroutines (methods) far easier. Though procedural languages allow reuse too, it is harder to do, and much easier to cheat. It is no surprise that Smalltalk is relatively easy to learn, mainly due to its simple syntax and semantics, as well as few concepts. Objects, classes, messages, and methods form the basis of programming in Smalltalk. The general methodology to use Smalltalk The notion of human-computer interface also results in Smalltalk promoting the development of safer systems. Errors in Smalltalk may be viewed as objects telling users that confusion exists as to how to perform a desired function.
series	other
last changed	2003/04/23 15:14

_id	c3f4
authors	Joy, William
year	1980
title	An Introduction to Display Editing with VI
source	September, 1980. 30 p
summary	VI (Visual) is a display oriented interactive text editor. When using VI the screen of the terminal acts as a window into the file which is being editing. Changes which made to the file are reflected in what is seen. Using VI the user can insert new text any place in the file quite easily. Most of the commands to VI move the cursor around in the file. There are commands to move the cursor forward and backward in units of characters, words, sentences and paragraphs. A small set of operators, like d for delete and c for change, are combined with the motion commands to form operations such as delete word or change paragraph, in a simple and natural way. This regularity and the mnemonic assignment of commands to keys makes the editor command set easy to remember and to use. VI works on a large number of display terminals, and new terminals are easily driven after editing a terminal description file. While it is advantageous to have an intelligent terminal which can locally insert and delete lines and characters from the display, the editor will function quite well on dumb terminals over slow phone lines. The editor makes allowances for the low bandwidth in these situations and uses smaller window sizes and different display updating algorithms to make best use of the limited speed available. It is also possible to use the command set of VI on hardcopy terminals, storage tubes and 'glass ty's' using a one line editing window; thus VI's command set is available on all terminals. The full command set of the more traditional, line oriented editor ED is available within VI; it is quite simple to switch between the two modes of editing
keywords	UNIX, display, word processing, software
series	CADline
last changed	1999/02/12 15:08

_id	ddss2006-hb-187
id	DDSS2006-HB-187
authors	Lidia Diappi and Paola Bolchi
year	2006
title	Gentrification Waves in the Inner-City of Milan - A multi agent / cellular automata model based on Smith's Rent Gap theory
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Innovations in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Springer, ISBN-10: 1-4020-5059-3, ISBN-13: 978-1-4020-5059-6, p. 187-201
summary	The aim of this paper is to investigate the gentrification process by applying an urban spatial model of gentrification, based on Smith's (1979; 1987; 1996) Rent Gap theory. The rich sociological literature on the topic mainly assumes gentrification to be a cultural phenomenon, namely the result of a demand pressure of the suburban middle and upper class, willing to return to the city (Ley, 1980; Lipton, 1977, May, 1996). Little attempt has been made to investigate and build a sound economic explanation on the causes of the process. The Rent Gap theory (RGT) of Neil Smith still represents an important contribution in this direction. At the heart of Smith's argument there is the assumption that gentrification takes place because capitals return to the inner city, creating opportunities for residential relocation and profit. This paper illustrates a dynamic model of Smith's theory through a multi-agent/ cellular automata system approach (Batty, 2005) developed on a Netlogo platform. A set of behavioural rules for each agent involved (homeowner, landlord, tenant and developer, and the passive 'dwelling' agent with their rent and level of decay) are formalised. The simulations show the surge of neighbouring degradation or renovation and population turn over, starting with different initial states of decay and estate rent values. Consistent with a Self Organized Criticality approach, the model shows that non linear interactions at local level may produce different configurations of the system at macro level. This paper represents a further development of a previous version of the model (Diappi, Bolchi, 2005). The model proposed here includes some more realistic factors inspired by the features of housing market dynamics in the city of Milan. It includes the shape of the potential rent according to city form and functions, the subdivision in areal submarkets according to the current rents, and their maintenance levels. The model has a more realistic visualisation of the city and its form, and is able to show the different dynamics of the emergent neighbourhoods in the last ten years in Milan.
keywords	Multi agent systems, Housing market, Gentrification, Emergent systems
series	DDSS
last changed	2006/08/29 12:55

_id	2006_252
id	2006_252
authors	Penttilä, Hannu
year	2006
title	Managing the Changes within the Architectural Practice - The Effects of Information and Communication Technology (ICT)
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 252-260
doi	https://doi.org/10.52842/conf.ecaade.2006.252
summary	The architectural working environment has changed during the last 30 years more than ever before. Most of the changes have been related with information and communication technologies (ICT). Architectural working methods and tools have changed profoundly, when CAD has replaced more traditional methods and tools. Communicative working environment and document management within design & construction has also been changed to digital, meaning email and project webs. Completing a traditional architectural profile of the 20th centrury, a drawer-designer, contemporary communicating and managing skills plus mastering ICT are needed today to operate modern architectural practise properly. The objective of this study is to create a change-oriented understanding of the contemporary architectural profession concentrating on architectural information management. The first phase, a literature study, will be followed by interviews and case-studies, to examine three hypothetically different periods of time: a) 1980-85 the era before CAD, the last days of hand-drawing, b) 1993-98 the era of digital drawing, the expansion of architectural CAD, c) 2000-05 the rise of integrated and pervasive web-supported digital design. The study will propose new aspects to be included in the modern architectural profile, namingly project coordination, collaborative team-work, design information integration and profound digital content management.
keywords	architectural profession; design practice; architectural ICT; change management
series	eCAADe
email
last changed	2022/06/07 08:00

_id	acadia21_76
id	acadia21_76
authors	Smith, Rebecca
year	2021
title	Passive Listening and Evidence Collection
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by B. Bogosian, K. Dörfler, B. Farahi, J. Garcia del Castillo y López, J. Grant, V. Noel, S. Parascho, and J. Scott. 76-81.
doi	https://doi.org/10.52842/conf.acadia.2021.076
summary	In this paper, I present the commercial, urban-scale gunshot detection system ShotSpotter in contrast with a range of ecological sensing examples which monitor animal vocalizations. Gunshot detection sensors are used to alert law enforcement that a gunshot has occurred and to collect evidence. They are intertwined with processes of criminalization, in which the individual, rather than the collective, is targeted for punishment. Ecological sensors are used as a “passive” practice of information gathering which seeks to understand the health of a given ecosystem through monitoring population demographics, and to document the collective harms of anthropogenic change (Stowell and Sueur 2020). In both examples, the ability of sensing infrastructures to “join up and speed up” (Gabrys 2019, 1) is increasing with the use of machine learning to identify patterns and objects: a new form of expertise through which the differential agendas of these systems are implemented and made visible. I trace the differential agendas of these systems as they manifest through varied components: the spatial distribution of hardware in the existing urban environment and / or landscape; the software and other informational processes that organize and translate the data; the visualization of acoustical sensing data; the commercial factors surrounding the production of material components; and the apps, platforms, and other forms of media through which information is made available to different stakeholders. I take an interpretive and qualitative approach to the analysis of these systems as cultural artifacts (Winner 1980), to demonstrate how the political and social stakes of the technology are embedded throughout them.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	9fcb
authors	Steele, Guy Lewis
year	1980
title	The Definition and Implementation of a Computer Programming Language Based Constraints
source	MIT - AITR-595
summary	The constraint paradigm is a model of computation in which values are deduced whenever possible, under the limitation that deductions be local in a certain sense. One may visualize a constraint 'program' as a network of devices connected by wires. Data values may flow along the wires, and computation is performed by the devices. A device computes using only locally available information (with a few exceptions), and places newly derived values on other, locally attached wires. In this way computed values are propagated. An advantage of the constraint paradigm (not unique to it) is that a single relationship can be used in more than one direction. The connections to a device are not labelled as inputs and outputs; a device will compute with whatever values are available, and produce as many new values as it can. General theorem provers are capable of such behavior, but tend to suffer from combinatorial explosion; it is not usually useful to derive all the possible consequences of a set of hypotheses. The constraint paradigm places a certain kind of limitation on the deduction process. The limitations imposed by the constraint paradigm are not the only one possible. It is argued, however, that they are restrictive enough to forestall combinatorial explosion in many interesting computational situations, yet permissive enough to allow useful computations in practical situations. Moreover, the paradigm is intuitive: It is easy to visualize the computational effects of these particular limitations, and the paradigm is a natural way of expressing programs for certain applications, in particular relationships arising in computer-aided design. A number of implementations of constraint-based programming languages are presented. A progression of ever more powerful languages is described, complete implementations are presented and design difficulties and alternatives are discussed. The goal approached, though not quite reached, is a complete programming system which will implicitly support the constraint paradigm to the same extent that LISP, say, supports automatic storage management.
series	thesis:PhD
email
more	ftp://publications.ai.mit.edu/ai-publications/pdf/AITR-595.pdf
last changed	2003/02/12 22:37

_id	0830
authors	Ball, A. A.
year	1980
title	How to Make the Bicubic Patch Work Using Reparametrisation
source	1980 ? 11 p. includes bibliography
summary	This paper comprises a series of examples in numerical surface definition, loosely strung together, to show the practical limitations of the bicubic patch and how they can be overcome by reparametrisation. The concept of reparametrisation is more general than that used in computer- aided geometric design insofar as the reparametrisation is modeled in addition to the basic parametric equation
keywords	CAD, computational geometry, curved surfaces, parametrization
series	CADline
last changed	2003/06/02 13:58

_id	2fdd
authors	Barsky, Brian A. and Thomas, Spencer W.
year	1980
title	Transpline Curve Representation System
source	April, 1980. 19 p. : ill. includes bibliography
summary	An interactive curve representation system has been developed based on the concept of transforming among several parametric spline curve formulations. The available formulations are the interpolatory spline, uniform B-spline, spline under tension, and NU-spline. The system implementation is described in the context of a sample design session
keywords	computational geometry, curves, representation, splines
series	CADline
last changed	2003/06/02 13:58

_id	e825
authors	Baybars, Ilker and Eastman, Charles M.
year	1980
title	Enumerating Architectural Arrangements by Generating Their Underlying Graphs
source	Environment and Planning B. 1980. vol. 7: pp. 289- 310 : ill. includes bibliography. -- See also 'Enumerating Architectural Arrangements: Comment on a Recent Paper by Baybars and Eastman' by C.F. Earl
summary	One mathematical correspondence to the partitioning of the plane is a Weighted Plane Graph (WPG). This paper first focuses on the systematic generation of WPGs, in a fashion similar to crystal growth. During this process, the WPGs are represented by adjacency matrices. The authors, thus, present a method for embedding the WPG in the plane, given its adjacency matrix. These graphs can, then, be mapped into floor plans. The common practice here is the use of the `geometric dual' of a WPG. The authors propose, instead, the use of the `Pseudogeometric dual' of a WPG directly to translate (part of) a design brief into alternative spatial layouts. Also discussed is the ability to create courtyards and/or circulation spaces given a specific WPG, without increasing the size of the problem
keywords	enumeration, architecture, floor plans, graphs, design process, automation, algorithms, space allocation, CAD
series	CADline
email
last changed	2003/05/17 10:15

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	8a27
authors	Bentley, Jon L. and Carruthers, Wendy
year	1980
title	Algorithms for Testing the Inclusion of Points in Polygons
source	Allertorn Conference on Communication, Control and Computing (18th : 1980). (10) p. includes bibliography
summary	Determining whether a given point lies inside or outside a simple polygon is an important problem in many applications, including computer vision systems and computer-assisted political redistricting systems. In this paper the authors give algorithms for inclusion problems that are efficient for polygons that are 'close to convex' in a certain precise sense. An empirical study of polygons that arise in several applications shows that typical polygons are indeed 'close to convex,' and a program implementing the algorithm shows that is extremely efficient on point sets of practical sizes
keywords	point inclusion, polygons, algorithms, computational geometry
series	CADline
last changed	2003/06/02 13:58

_id	241c
authors	Boehm, Wolfgang
year	1980
title	Inserting New Knots into B-spline Curves
source	IPC Business Press. July, 1980. vol. 12: pp. 199-201 : ill. includes bibliography
summary	For some applications, further subdivision of a segment of a B-spline curve or B-spline surface is desirable. This paper provides an algorithm for this. The structure is similar to de Boor's algorithm for the calculation of a point on a curve. An application of the subdivision is illustrated
keywords	algorithms, B-splines, curves, curved surfaces
series	CADline
last changed	1999/02/12 15:07

_id	8593
authors	Braid, I.C.
year	1980
title	Superficial Blends in Geometric Modelling
source	12 p. : ill. February, 1980. Document No. 105. includes bibliography
summary	In engineering practice, many blended surfaces are both indicated and manufactured by rounding off a sharp edge. The authors term them `superficial' blends in contrast to `designed' blends for which existing surface techniques are appropriate. The provision of superficial blends in a geometric modeling system is explained, and a method is given for drawing objects containing blended edges
keywords	geometric modeling, CAD, representation, solids
series	CADline
last changed	2003/06/02 13:58

For more results click below: