Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 60

Reformat results as: short short into frame detailed detailed into frame

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	a8d1
authors	Galle, Per
year	1981
title	An Algorithm for Exhaustive Generation of Building Floor Plans
source	Communications of the ACM December, 1981. vol. 2: pp.813-823, [3] : ill. includes bibliography.
summary	The combinatorial complexity of most floor plan design problems makes it practically impossible to obtain a systematic knowledge of possible solutions using pencil and paper. The objective of this paper is to contribute to the development of computer methods providing such knowledge for the designer. The paper describes an algorithm which generates all possible rectangular plans on modular grids with congruent cells, subject to constraints on total area, room areas, wall lengths, room adjacencies, and room orientations. To make room sizes regular and limit the solution set only, such grids are used which minimize the number of cells in the smallest room. The description is sufficiently detailed to serve as a basis for programming. Test results for a Pascal implementation of the algorithm are reported. Realistic problems up to ten rooms have been solved in modest length of computer time. The results indicate that the approach of exhaustive generation may prove to be more fruitful than generally assumed
keywords	architecture, floor plans, automation, design, planning, algorithms, combinatorics, grids, constraints, synthesis
series	CADline
last changed	1999/02/12 15:08

_id	20b5
authors	Kalay, Yehuda E.
year	1981
title	Interactive Shape Generation and Spatial Conflict Testing
source	ACM IEEE Design Automation Conference Proceedings (18th : 1981 : Nashville, Tennessee). pp. 75-81 : ill. includes bibliography
summary	A general purpose, research oriented, interactive modeling system is presented. It is based on two different coherent polyhedral shape representations: a planar graph, used for computation and data manipulation, and relational-database for compact store and general communication with application programs. The two representations effectively partition the system shape-space into active and inactive shapes, respectively. These are explicitly interchangeable by the user, keeping the actual workspace at a manageable size. The basic functionalities provided by the system include the combination of primitive shapes into complex objects by means of spatial set operators (union, intersection and difference), their modeling by means of scaling, rotation and translation, spatial interference detection and graphical display capabilities
keywords	geometric modeling, solid modeling, representation, boolean operations, B-rep, intersection
series	CADline
email
last changed	2003/06/02 13:58

_id	4925
authors	Poon, J. and Maher, M.L.
year	1997
title	Co-evolution in Design
source	CAADRIA ‘97 [Proceedings of the Second Conference on Computer Aided Architectural Design Research in Asia / ISBN 957-575-057-8] Taiwan 17-19 April 1997, pp. 439-448
doi	https://doi.org/10.52842/conf.caadria.1997.439
summary	A design process is traditionally viewed as a sequential process model from the formulation of the problem to the synthesis of solutions. Simon (1981) regards design as a state-space search where a problem leads to the solution. To be more practical, there are many versions of solution generated during design, where each current one is an improvement over the previous one. This kind of synthesis of solutions can be viewed as an evolutionary system over time. We propose to apply the metaphor of "exploration” to design, and further argue that evolution occurs in the problem space as well as in the solution space. Co-evolutionary design is introduced to remove the assumption of having a fixed goal (problem). The problem is allowed to change over time. Two algorithms for co-evolution are presented. Their characteristics and differences are highlighted. The paper moves on to review the design history of the Sydney Opera House and to show how observations from this real life example confirm our co-evolutionary model.
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	a664
authors	Samet, Hanan
year	1981
title	Connected Component Labeling Using Quadtrees
source	Journal of the Association for Computing Machinery. July, 1981. vol. 23: pp. 487-501 : ill. includes bibliography
summary	An algorithm is presented for labeling the connectedÔ h)000*°° ÔŒ components of an image represented by a quadtree. The algorithm proceeds by exploring all possible adjacencies for each node once and only once. As soon as this is done, any equivalences generated by the adjacency labeling phase are propagated. Analysis of the algorithm reveals that its average execution time is of the order O(W+B(logB)), where B and W correspond to the number of blocks comprising the foreground and background, respectively, of the image
keywords	algorithms, quadtree, image processing, pattern recognition, representation
series	CADline
last changed	1999/02/12 15:09

_id	avocaad_2001_09
id	avocaad_2001_09
authors	Yu-Tung Liu, Yung-Ching Yeh, Sheng-Cheng Shih
year	2001
title	Digital Architecture in CAD studio and Internet-based competition
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Architectural design has been changing because of the vast and creative use of computer in different ways. From the viewpoint of designing itself, computer has been used as drawing tools in the latter phase of design (Mitchell 1977; Coyne et al. 1990), presentation and simulation tools in the middle phase (Liu and Bai 2000), and even critical media which triggers creative thinking in the very early phase (Maher et al. 2000; Liu 1999; Won 1999). All the various roles that computer can play have been adopted in a number of professional design corporations and so-called computer-aided design (CAD) studio in schools worldwide (Kvan 1997, 2000; Cheng 1998). The processes and outcomes of design have been continuously developing to capture the movement of the computer age. However, from the viewpoint of social-cultural theories of architecture, the evolvement of design cannot be achieved solely by designers or design processes. Any new idea of design can be accepted socially, culturally and historically only under one condition: The design outcomes could be reviewed and appreciated by critics in the field at the time of its production (Csikszentmihalyi 1986, 1988; Schon and Wiggins 1992; Liu 2000). In other words, aspects of design production (by designers in different design processes) are as critical as those of design appreciation (by critics in different review processes) in the observation of the future trends of architecture.Nevertheless, in the field of architectural design with computer and Internet, that is, so-called computer-aided design computer-mediated design, or internet-based design, most existing studies pay more attentions to producing design in design processes as mentioned above. Relatively few studies focus on how critics act and how they interact with designers in the review processes. Therefore, this study intends to investigate some evolving phenomena of the interaction between design production and appreciation in the environment of computer and Internet.This paper takes a CAD studio and an Internet-based competition as examples. The CAD studio includes 7 master's students and 2 critics, all from the same countries. The Internet-based competition, held in year 2000, includes 206 designers from 43 counties and 26 critics from 11 countries. 3 students and the 2 critics in the CAD studio are the competition participating designers and critics respectively. The methodological steps are as follows: 1. A qualitative analysis: observation and interview of the 3 participants and 2 reviewers who join both the CAD studio and the competition. The 4 analytical criteria are the kinds of presenting media, the kinds of supportive media (such as verbal and gesture/facial data), stages of the review processes, and interaction between the designer and critics. The behavioral data are acquired by recording the design presentation and dialogue within 3 months. 2. A quantitative analysis: statistical analysis of the detailed reviewing data in the CAD studio and the competition. The four 4 analytical factors are the reviewing time, the number of reviewing of the same project, the comparison between different projects, and grades/comments. 3. Both the qualitative and quantitative data are cross analyzed and discussed, based on the theories of design thinking, design production/appreciation, and the appreciative system (Goodman 1978, 1984).The result of this study indicates that the interaction between design production and appreciation during the review processes could differ significantly. The review processes could be either linear or cyclic due to the influences from the kinds of media, the environmental discrepancies between studio and Internet, as well as cognitive thinking/memory capacity. The design production and appreciation seem to be more linear in CAD studio whereas more cyclic in the Internet environment. This distinction coincides with the complementary observations of designing as a linear process (Jones 1970; Simon 1981) or a cyclic movement (Schon and Wiggins 1992). Some phenomena during the two processes are also illustrated in detail in this paper.This study is merely a starting point of the research in design production and appreciation in the computer and network age. The future direction of investigation is to establish a theoretical model for the interaction between design production and appreciation based on current findings. The model is expected to conduct using revised protocol analysis and interviews. The other future research is to explore how design computing creativity emerge from the process of producing and appreciating.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	eb23
authors	Akin, Omer
year	1981
title	Efficient Computer-User Interface in Electronic Mail Systems
source	Department of Computer Science, April, 1981. ii, 24 p. includes bibliography
summary	This research explores the question of improving user- computer interface. The approach is one of observing and codifying various parameters that influence the efficiency of interface in the context of electronic mail tasks. In the paper the authors observe 'expert' and 'regular' users of a mail system and analyze the sources of efficiency. It is clear that experts use a different, more specialized, set of commands in performing standard mail tasks. While experts perform these tasks with fewer errors and more 'completely,' it is not clear that they achieve this any faster than regular users. Recommendations for design are made
keywords	user interface, protocol analysis
series	CADline
email
last changed	2003/05/17 10:09

_id	c9dc
authors	Avron, Barr and Feigenbaum, Edward A. (editors)
year	1981
title	The Handbook of Artificial Intelligence
source	xiv, 409 p. Stanford, California: HeurisTech Press., 1981. vol. 1 of 3: includes bibliography p.[365]-388 and indexes
summary	Part 1 of a three volume set that contains some 200 articles on AI. Volume 1 discusses the goals of AI research, the history of the field and the current active areas of research. It explains how the book is organized, and the literature of the field. How to access journal articles and technical reports for further reading
keywords	AI
series	CADline
last changed	2003/06/02 13:58

_id	barakat_theses_eaea2007
id	barakat_theses_eaea2007
authors	Barakat, Husam
year	2008
title	Analytical Study of the Projects of Students in the Architectural Design - Comparision Between Physical and Digital Models
source	Proceedings of the 8th European Architectural Endoscopy Association Conference
summary	Since its foundation in 1981, Architectural faculty has adopted traditional teaching methods for practical subjects such as architectural design and Urban planning. In these subjects, students submitted their projects and exams on (chanson) and (calk) sheets using various drawing tools. Such tools are still in use by students up to date in manually architectural concept presentation. This comes after the students pass a number of subjects related to art and engineering drawing that help the students in gaining drawing representation and rendering skills.
keywords	architectural concept, traditional teaching, computer technology
series	EAEA
email
more	http://info.tuwien.ac.at/eaea
last changed	2008/04/29 20:46

_id	bf5a
authors	Botman, J.J.
year	1981
title	Dynamics of Housing and Planning: A Regional Simulation Model
source	Delft University of Technology - Martinus Nijhoff Publishers, Dordrecht (ISBN 90-247-2499-6)
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	a6f1
authors	Bridges, A.H.
year	1986
title	Any Progress in Systematic Design?
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 5-15
summary	In order to discuss this question it is necessary to reflect awhile on design methods in general. The usual categorization discusses 'generations' of design methods, but Levy (1981) proposes an alternative approach. He identifies five paradigm shifts during the course of the twentieth century which have influenced design methods debate. The first paradigm shift was achieved by 1920, when concern with industrial arts could be seen to have replaced concern with craftsmanship. The second shift, occurring in the early 1930s, resulted in the conception of a design profession. The third happened in the 1950s, when the design methods debate emerged; the fourth took place around 1970 and saw the establishment of 'design research'. Now, in the 1980s, we are going through the fifth paradigm shift, associated with the adoption of a holistic approach to design theory and with the emergence of the concept of design ideology. A major point in Levy's paper was the observation that most of these paradigm shifts were associated with radical social reforms or political upheavals. For instance, we may associate concern about public participation with the 1970s shift and the possible use (or misuse) of knowledge, information and power with the 1980s shift. What has emerged, however, from the work of colleagues engaged since the 1970s in attempting to underpin the practice of design with a coherent body of design theory is increasing evidence of the fundamental nature of a person's engagement with the design activity. This includes evidence of the existence of two distinctive modes of thought, one of which can be described as cognitive modelling and the other which can be described as rational thinking. Cognitive modelling is imagining, seeing in the mind's eye. Rational thinking is linguistic thinking, engaging in a form of internal debate. Cognitive modelling is externalized through action, and through the construction of external representations, especially drawings. Rational thinking is externalized through verbal language and, more formally, through mathematical and scientific notations. Cognitive modelling is analogic, presentational, holistic, integrative and based upon pattern recognition and pattern manipulation. Rational thinking is digital, sequential, analytical, explicatory and based upon categorization and logical inference. There is some relationship between the evidence for two distinctive modes of thought and the evidence of specialization in cerebral hemispheres (Cross, 1984). Design methods have tended to focus upon the rational aspects of design and have, therefore, neglected the cognitive aspects. By recognizing that there are peculiar 'designerly' ways of thinking combining both types of thought process used to perceive, construct and comprehend design representations mentally and then transform them into an external manifestation current work in design theory is promising at last to have some relevance to design practice.
series	CAAD Futures
email
last changed	2003/11/21 15:16

_id	91c4
authors	Checkland, P.
year	1981
title	Systems Thinking, Systems Practice
source	John Wiley & Sons, Chichester
summary	Whether by design, accident or merely synchronicity, Checkland appears to have developed a habit of writing seminal publications near the start of each decade which establish the basis and framework for systems methodology research for that decade."" Hamish Rennie, Journal of the Operational Research Society, 1992 Thirty years ago Peter Checkland set out to test whether the Systems Engineering (SE) approach, highly successful in technical problems, could be used by managers coping with the unfolding complexities of organizational life. The straightforward transfer of SE to the broader situations of management was not possible, but by insisting on a combination of systems thinking strongly linked to real-world practice Checkland and his collaborators developed an alternative approach - Soft Systems Methodology (SSM) - which enables managers of all kinds and at any level to deal with the subtleties and confusions of the situations they face. This work established the now accepted distinction between hard systems thinking, in which parts of the world are taken to be systems which can be engineered, and soft systems thinking in which the focus is on making sure the process of inquiry into real-world complexity is itself a system for learning. Systems Thinking, Systems Practice (1981) and Soft Systems Methodology in Action (1990) together with an earlier paper Towards a Systems-based Methodology for Real-World Problem Solving (1972) have long been recognized as classics in the field. Now Peter Checkland has looked back over the three decades of SSM development, brought the account of it up to date, and reflected on the whole evolutionary process which has produced a mature SSM. SSM: A 30-Year Retrospective, here included with Systems Thinking, Systems Practice closes a chapter on what is undoubtedly the most significant single research programme on the use of systems ideas in problem solving. Now retired from full-time university work, Peter Checkland continues his research as a Leverhulme Emeritus Fellow. "
series	other
last changed	2003/04/23 15:14

_id	a8ca
authors	Courtieux, Gerard
year	1981
title	Man Machine Interface Problems in Computer Aided Architectural Design
source	1981. pp. 231-250 : ill. includes bibliography. -- discussion (pp. 247-250)
summary	The author and two other researchers conducted a world-wide survey of existing computer aided architectural design programs in 1978. The purpose of the survey was to validate an earlier study of the architectural design process and to investigate problem areas in Computer Aided Architectural Design (CAAD). The survey indicated that two problems of man machine interaction in CAAD, though partly solved, remain a challenge for computer scientists: the description and graphical representation of three-dimensional objects. The formalization of the information collected in the survey, together with the experience of the author in teaching computer graphics to architecture students for the past ten years, is used to give some insight in these two problems and to make some recommendations for the improvement of the man machine interface in CAAD
keywords	architecture, CAD, user interface
series	CADline
last changed	1999/02/12 15:07

_id	2f1a
authors	Dabney, M.K., Wright, J.C. and Sanders, D.H.
year	1999
title	Virtual Reality and the Future of Publishing Archaeological Excavations: the multimedia publication of the prehistoric settlement on Tsoungiza at Ancient Nemea
source	New York: The Metropolitan Museum of Art
summary	The Nemea Valley Archaeological Project is a study of settlement and land use in a regional valley system in Greece extending from the Upper Paleolithic until the present. Active field research was conducted by four teams between 1981 and 1990. The first component was a regional archaeological survey. Second, and closely related to the first, was a social anthropological study of modern settlement and land use. Next was a team assigned to excavate the succession of prehistoric settlements of Ancient Nemea on Tsoungiza. Last, historical ecologists, a palynologist, and a geologist formed the environmental component of the research. As a result of advances in electronic publishing, plans for the final publication of the Nemea Valley Archaeological Project have evolved. Complete publication of the excavation of the prehistoric settlements of Ancient Nemea on Tsoungiza will appear in an interactive multimedia format on CD/DVD in Fall 2000. This project is planned to be the first electronic publication of the American School of Classical Studies at Athens. We have chosen to publish in electronic format because it will meet the needs and interests of a wider audience, including avocational archaeologists, advanced high school and college students, graduate students, and professional archaeologists. The multimedia format on CD/DVD will permit the inclusion of text, databases, color and black-and-white images, two and three-dimensional graphics, and videos. This publication is being developed in cooperation with Learning Sites, Inc., which specializes in interactive three-dimensional reconstructions of ancient worlds http://www.learningsites.com. The Nemea Valley Archaeological Project is particularly well prepared for the shift towards electronic publishing because the project's field records were designed for and entered in computer databases from the inception of the project. Attention to recording precise locational information for all excavated objects enables us to place reconstructions of objects in their reconstructed architectural settings. Three-dimensional images of architectural remains and associated features will appear both as excavated and as reconstructed. Viewers will be able to navigate these images through the use of virtual reality. Viewers will also be able to reference all original drawings, photographs, and descriptions of the reconstructed architecture and objects. In this way a large audience will be able to view architectural remains, artifacts, and information that are otherwise inaccessible.
series	other
last changed	2003/04/23 15:14

_id	659f
authors	Earl, C.F.
year	1981
title	Enumerating Architectural Arrangements : Comment on a Recent Paper by Baybars and Eastman
source	Environment and Planning B. 1981. vol. 8: pp. 115-118 : ill. includes bibliography. -- See Baybars, I. and Eastman, Charles M. 'Enumerating Architectural Arrangements by Generating Their Underlying Graphs' (Environmental and Planning B, 1980, vol.7, pp. 289-310)
summary	Comments and discussion on the method proposed for generating the graphs for enumerating architectural arrangements by Baybars and Eastman (1980)
keywords	enumeration, architecture, floor plans, graphs
series	CADline
last changed	2003/05/17 10:15

_id	85bb
authors	Eastman, Charles M.
year	1981
title	Computers in Architecture, Design, and Fine and Performing Arts Education
source	5, [6] p. May, 1981
summary	In the next ten years it is expected that the processes and techniques for teaching design will greatly change. Feedback on design decisions - visually and analytically - will be fast and more powerful than is possible today. Much of the busy paper and pencil construction work will be eliminated or greatly reduced. The author anticipates students designing buildings and artifacts on the computer, quickly and with sophistication, achieving results beyond what can be expected through manually based education today. This proposal cannot realize this whole revolution. Rather, it attempts to only take a step outward from the neck of a funnel, showing people opportunities and providing a framework that allows easy extension. Some of these extensions, most of them trivial to develop, are presented in the scenario section of the proposal
keywords	architecture, design, education, CAD
series	CADline
email
last changed	2003/05/17 10:15

_id	0776
authors	Er, M.C.
year	1981
title	Matrices of Fibonacci Numbers
source	12 p. Wollongong: Department of Computing Science, University of Wollongong, October, 1981. includes bibliography
summary	The matrices of Fibonacci numbers (called windows) possess some unusual properties which are not shared by normal matrices, such as commutativity under multiplication and +1 for all determinants. The beauty of multiplicative closure lends a hand to the fast computation of generalized order-k Fibonacci numbers in O(k2 log n) time
keywords	Fibonacci, mathematics
series	CADline
last changed	2003/06/02 13:58

_id	11b4
authors	Hall, Theodore W.
year	2001
title	2001: An Acadia Odyssey
source	ACADIA Quarterly, vol. 20, pp. 6-7
doi	https://doi.org/10.52842/conf.acadia.2001.006
summary	ACADIA marked the dawn of its third decade last October, at its 21st annual conference, the 20th anniversary of its birth. If the numbers seem inconsistent at first, recall that the association was born at its 1st conference, its 0th anniversary, in 1981. Of the twenty-four founding members, only a few are still active. I joined at the third conference, in 1983, and I’ve never met half the founders. Perhaps they never expected the association to last two years, let alone two decades. In the meantime, an entire generation has come of age and begun to take the reins. ACADIA is alive and well, thank you very much.
series	ACADIA
email
last changed	2022/06/07 07:50

_id	cf2009_poster_09
id	cf2009_poster_09
authors	Hsu, Yin-Cheng
year	2009
title	Lego Free-Form? Towards a Modularized Free-Form Construction
source	T. Tidafi and T. Dorta (eds) Joining Languages Cultures and Visions: CAADFutures 2009 CD-Rom
summary	Design Media is the tool designers use for concept realization (Schon and Wiggins, 1992; Liu, 1996). Design thinking of designers is deeply effected by the media they tend to use (Zevi, 1981; Liu, 1996; Lim, 2003). Historically, architecture is influenced by the design media that were available within that era (Liu, 1996; Porter and Neale, 2000; Smith, 2004). From the 2D plans first used in ancient egypt, to the 3D physical models that came about during the Renaissance period, architecture reflects the media used for design. When breakthroughs in CAD/CAM technologies were brought to the world in the twentieth century, new possibilities opened up for architects.
keywords	CAD/CAM free-form construction, modularization
series	CAAD Futures
type	poster
last changed	2009/07/08 22:12

_id	28cc
authors	Johnson, Robert H. and Dewhirst, Donald L.
year	1981
title	Machine Layout With Volumetric Models
source	International Congress and Exposition. February, 1981. 7 p. : ill. includes bibliography. --- An SAE Technical Paper Series
summary	Computer-Aided Engineering Systems are interactive computer based systems for application to a wide variety of engineering and manufacturing functions. Volumetric models and a structured database are two key components of these systems. This paper presents the concept of a product structures Data Base and its use in combination with volumetric models, in the layout phase of a machine design. This combination provides for automatic analysis of interface and fit between parts of a machine
keywords	CAE, solid modeling, representation, systems, CAM, integration, database
series	CADline
last changed	2003/06/02 13:58

For more results click below: