Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 60

Reformat results as: short short into frame detailed detailed into frame

_id	c0ee
authors	Bentley, Jon L. and Ottmann, Thomas
year	1981
title	The Complexity of Manipulating Hierarchically Defined Sets of Rectangles
source	40 p. : ill. Pittsburgh, PA: Department of Computer Science, CMU., April, 1981. CMU-CS-81-109. includes bibliography
summary	Algorithms that manipulate sets of rectangles are of great practical importance in VLSI design systems and other applications. Although much theoretical work has appeared recently on the complexity of rectangle problems, it has assumed that the inputs are given as a list of rectangles. In this paper the authors study the complexity of rectangle problems when the inputs are given in a hierarchical language that allows the designer to build large designs by replicating small designs. They show that while most of the problems are NP-hard in the general case, there are O(N log N) algorithms that process inputs obeying certain restrictions
keywords	rectangles, algorithms, computational geometry, data structures
series	CADline
last changed	2003/06/02 10:24

_id	a8d1
authors	Galle, Per
year	1981
title	An Algorithm for Exhaustive Generation of Building Floor Plans
source	Communications of the ACM December, 1981. vol. 2: pp.813-823, [3] : ill. includes bibliography.
summary	The combinatorial complexity of most floor plan design problems makes it practically impossible to obtain a systematic knowledge of possible solutions using pencil and paper. The objective of this paper is to contribute to the development of computer methods providing such knowledge for the designer. The paper describes an algorithm which generates all possible rectangular plans on modular grids with congruent cells, subject to constraints on total area, room areas, wall lengths, room adjacencies, and room orientations. To make room sizes regular and limit the solution set only, such grids are used which minimize the number of cells in the smallest room. The description is sufficiently detailed to serve as a basis for programming. Test results for a Pascal implementation of the algorithm are reported. Realistic problems up to ten rooms have been solved in modest length of computer time. The results indicate that the approach of exhaustive generation may prove to be more fruitful than generally assumed
keywords	architecture, floor plans, automation, design, planning, algorithms, combinatorics, grids, constraints, synthesis
series	CADline
last changed	1999/02/12 15:08

_id	caadria2006_217
id	caadria2006_217
authors	KILIAN, AXEL
year	2006
title	DESIGN EXPLORATION WITH CIRCULAR DEPENDENCIES: A chair design experiment
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 217-226
doi	https://doi.org/10.52842/conf.caadria.2006.x.q2e
summary	The paper demonstrates the need for advanced models of representation for circular dependency networks common in design problems that deal with multiple constraints. Constraints in a design problem are generally perceived as limitations to design exploration. The careful construction of constraint relationships can help to turn constraints into design drivers for the problem instead. Closely related to the notion that new goals may emerge from creating designs is the idea that one goal of planning may be the design activity itself (Simon 1981). The interplay of many constraints can lead to circular dependencies that make design exploration a challenge as any change causes ripples throughout the entire design construct. D’Arcy Thompson (1942) describes form as a diagram of forces. The construction of design representations that reflect such dependency networks pose a challenge and are far from exact matches of the task environment (Simon 1981). The paper proceeds in mapping these abstract observations of the circular dependencies in the design process to a chair experiment from design to fabrication giving detailed descriptions of the interdependencies of material, fabrication and aesthetic constraints. The experiment shows how those constraints were instrumental in achieving the aesthetics of the full scale prototype.
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:49

_id	ecca
authors	Koning, H. and Eizenberg, J.
year	1981
title	The Language of the Prairie : Frank Lloyd Wright's Prairie Houses
source	Environment and Planning B. 1981. vol. 8: pp. 295-323 : ill. includes bibliography
summary	The following parametric shape grammar generates the compositional forms and specifies the function zones of Frank Lloyd Wright's prairie-style houses. The establishment of a fireplace is the key to the definition of the prairie-style house. Around this fireplace, functionally distinguished Froebelean-type blocks are recursively added and interpenetrated to from the basic compositions from which elaborated prairie-style houses are derived. The grammar is based on a corpus of eleven houses from the Winslow house, the evolutionary precursor of the style, to the Robie house, considered by many as the culmination of the style. Much has been written about prairie-style houses - their balance, their debt to Beaux Arts and Japanese design traditions, and their organic qualities. However, such descriptions do not explicitly inform us as to how prairie-style houses are constructed, and consequently provide little help in designing new members of this style. The power of a grammar, such as the one given here, is that it establishes a recursive structure from which new designs can be constructed. Three new prairie houses generated by the grammar as well as step-by-step generation of one of these designs are shown
keywords	synthesis, analysis, architecture, shape grammars, parametrization,
series	CADline
last changed	2003/06/02 13:58

_id	ecaade2012_087
id	ecaade2012_087
authors	Lorenz, Wolfgang E.
year	2012
title	Estimating the Fractal Dimension of Architecture: Using two Measurement Methods implemented in AutoCAD by VBA
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 505-513
doi	https://doi.org/10.52842/conf.ecaade.2012.1.505
wos	WOS:000330322400052
summary	The concept of describing and analyzing architecture from a fractal point of view, on which this paper is based, can be traced back to Benoît Mandelbrot (1981) and Carl Bovill (1996) to a considerable extent. In particular, this includes the distinction between scalebound (offering a limited number of characteristic elements) and scaling objects (offering many characteristic elements of scale) made by B. Mandelbrot (1981). In the fi rst place such a differentiation is based upon a visual description. This paper explores the possibility of assistance by two measurement methods, fi rst time introduced to architecture by C. Bovill (1996). While the box-counting method measures or more precisely estimates the box-counting dimension D b of objects (e.g. facades), range analysis examines the rhythm of a design. As CAD programs are familiar to architects during design processes, the author implemented both methods in AutoCAD using the scripting language VBA. First measurements indicate promising results for indicating the distinction between what B. Mandelbrot called scalebound and scaling buildings.
keywords	Box-Counting Method; Range Analysis; Hurst-Exponent; Analyzing Architecture; Scalebound and Scaling objects
series	eCAADe
email
last changed	2022/06/07 07:59

_id	c9dc
authors	Avron, Barr and Feigenbaum, Edward A. (editors)
year	1981
title	The Handbook of Artificial Intelligence
source	xiv, 409 p. Stanford, California: HeurisTech Press., 1981. vol. 1 of 3: includes bibliography p.[365]-388 and indexes
summary	Part 1 of a three volume set that contains some 200 articles on AI. Volume 1 discusses the goals of AI research, the history of the field and the current active areas of research. It explains how the book is organized, and the literature of the field. How to access journal articles and technical reports for further reading
keywords	AI
series	CADline
last changed	2003/06/02 13:58

_id	barakat_theses_eaea2007
id	barakat_theses_eaea2007
authors	Barakat, Husam
year	2008
title	Analytical Study of the Projects of Students in the Architectural Design - Comparision Between Physical and Digital Models
source	Proceedings of the 8th European Architectural Endoscopy Association Conference
summary	Since its foundation in 1981, Architectural faculty has adopted traditional teaching methods for practical subjects such as architectural design and Urban planning. In these subjects, students submitted their projects and exams on (chanson) and (calk) sheets using various drawing tools. Such tools are still in use by students up to date in manually architectural concept presentation. This comes after the students pass a number of subjects related to art and engineering drawing that help the students in gaining drawing representation and rendering skills.
keywords	architectural concept, traditional teaching, computer technology
series	EAEA
email
more	http://info.tuwien.ac.at/eaea
last changed	2008/04/29 20:46

_id	4555
authors	Bergland, Glenn D. and Gordon, Ronald D.
year	1981
title	Tutorial : Software Design Strategies.--2nd. ed
source	vi, 479 p. Los Angeles: IEEE Computer Society Press, 1981. includes bibliography and permuted title index p.449-477
summary	A tutorial text attempting to clarify and focus on aspects of software design that have direct effect on the structure of the final program. Several major design strategies are developed and compared, including: traditional forms of functional decomposition, the data structure design method of Michael Jeckson, the data-flow design method of Larry Constantine, and the programming calculus of Edsger Dijkstra. The process of organizing and coordinating the efforts of the design team is also studied especially practices of top-down development, code walkthroughs, and design reviews are presented and evaluated
keywords	software, design, programming, techniques
series	CADline
last changed	2003/06/02 13:58

_id	a6f1
authors	Bridges, A.H.
year	1986
title	Any Progress in Systematic Design?
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 5-15
summary	In order to discuss this question it is necessary to reflect awhile on design methods in general. The usual categorization discusses 'generations' of design methods, but Levy (1981) proposes an alternative approach. He identifies five paradigm shifts during the course of the twentieth century which have influenced design methods debate. The first paradigm shift was achieved by 1920, when concern with industrial arts could be seen to have replaced concern with craftsmanship. The second shift, occurring in the early 1930s, resulted in the conception of a design profession. The third happened in the 1950s, when the design methods debate emerged; the fourth took place around 1970 and saw the establishment of 'design research'. Now, in the 1980s, we are going through the fifth paradigm shift, associated with the adoption of a holistic approach to design theory and with the emergence of the concept of design ideology. A major point in Levy's paper was the observation that most of these paradigm shifts were associated with radical social reforms or political upheavals. For instance, we may associate concern about public participation with the 1970s shift and the possible use (or misuse) of knowledge, information and power with the 1980s shift. What has emerged, however, from the work of colleagues engaged since the 1970s in attempting to underpin the practice of design with a coherent body of design theory is increasing evidence of the fundamental nature of a person's engagement with the design activity. This includes evidence of the existence of two distinctive modes of thought, one of which can be described as cognitive modelling and the other which can be described as rational thinking. Cognitive modelling is imagining, seeing in the mind's eye. Rational thinking is linguistic thinking, engaging in a form of internal debate. Cognitive modelling is externalized through action, and through the construction of external representations, especially drawings. Rational thinking is externalized through verbal language and, more formally, through mathematical and scientific notations. Cognitive modelling is analogic, presentational, holistic, integrative and based upon pattern recognition and pattern manipulation. Rational thinking is digital, sequential, analytical, explicatory and based upon categorization and logical inference. There is some relationship between the evidence for two distinctive modes of thought and the evidence of specialization in cerebral hemispheres (Cross, 1984). Design methods have tended to focus upon the rational aspects of design and have, therefore, neglected the cognitive aspects. By recognizing that there are peculiar 'designerly' ways of thinking combining both types of thought process used to perceive, construct and comprehend design representations mentally and then transform them into an external manifestation current work in design theory is promising at last to have some relevance to design practice.
series	CAAD Futures
email
last changed	2003/11/21 15:16

_id	91c4
authors	Checkland, P.
year	1981
title	Systems Thinking, Systems Practice
source	John Wiley & Sons, Chichester
summary	Whether by design, accident or merely synchronicity, Checkland appears to have developed a habit of writing seminal publications near the start of each decade which establish the basis and framework for systems methodology research for that decade."" Hamish Rennie, Journal of the Operational Research Society, 1992 Thirty years ago Peter Checkland set out to test whether the Systems Engineering (SE) approach, highly successful in technical problems, could be used by managers coping with the unfolding complexities of organizational life. The straightforward transfer of SE to the broader situations of management was not possible, but by insisting on a combination of systems thinking strongly linked to real-world practice Checkland and his collaborators developed an alternative approach - Soft Systems Methodology (SSM) - which enables managers of all kinds and at any level to deal with the subtleties and confusions of the situations they face. This work established the now accepted distinction between hard systems thinking, in which parts of the world are taken to be systems which can be engineered, and soft systems thinking in which the focus is on making sure the process of inquiry into real-world complexity is itself a system for learning. Systems Thinking, Systems Practice (1981) and Soft Systems Methodology in Action (1990) together with an earlier paper Towards a Systems-based Methodology for Real-World Problem Solving (1972) have long been recognized as classics in the field. Now Peter Checkland has looked back over the three decades of SSM development, brought the account of it up to date, and reflected on the whole evolutionary process which has produced a mature SSM. SSM: A 30-Year Retrospective, here included with Systems Thinking, Systems Practice closes a chapter on what is undoubtedly the most significant single research programme on the use of systems ideas in problem solving. Now retired from full-time university work, Peter Checkland continues his research as a Leverhulme Emeritus Fellow. "
series	other
last changed	2003/04/23 15:14

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	a8ca
authors	Courtieux, Gerard
year	1981
title	Man Machine Interface Problems in Computer Aided Architectural Design
source	1981. pp. 231-250 : ill. includes bibliography. -- discussion (pp. 247-250)
summary	The author and two other researchers conducted a world-wide survey of existing computer aided architectural design programs in 1978. The purpose of the survey was to validate an earlier study of the architectural design process and to investigate problem areas in Computer Aided Architectural Design (CAAD). The survey indicated that two problems of man machine interaction in CAAD, though partly solved, remain a challenge for computer scientists: the description and graphical representation of three-dimensional objects. The formalization of the information collected in the survey, together with the experience of the author in teaching computer graphics to architecture students for the past ten years, is used to give some insight in these two problems and to make some recommendations for the improvement of the man machine interface in CAAD
keywords	architecture, CAD, user interface
series	CADline
last changed	1999/02/12 15:07

_id	sigradi2009_1044
id	sigradi2009_1044
authors	Cruz, Débora Melo; Gabriela Celani
year	2009
title	A influência de Frank Lloyd Wright sobre João Batista Vilanova Artigas – uma análise formal [The Influence of Frank Lloyd Wright on João Batista Vilanova Artigas - A Formal Analysis]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	This study intends to propose a new use of the shape grammar: verify the influence of a certain architect’s language over another architect’s language. Some Brazilian modern architecture critics suggest the existence of an influence of Wright’s prairie houses over Artigas’ early work, but the methods used to reach to this conclusion are always empirical and not very objective. The present work aims to confirm this influence in a more rational manner, comparing Wright’s prairie houses grammar developed by Koning and Eizenberg (1981) to Artigas’ first phase grammar that will developed in this work.
keywords	Gramática da forma; F. L. Wright; J. V. Artigas
series	SIGRADI
email
last changed	2016/03/10 09:49

_id	2f1a
authors	Dabney, M.K., Wright, J.C. and Sanders, D.H.
year	1999
title	Virtual Reality and the Future of Publishing Archaeological Excavations: the multimedia publication of the prehistoric settlement on Tsoungiza at Ancient Nemea
source	New York: The Metropolitan Museum of Art
summary	The Nemea Valley Archaeological Project is a study of settlement and land use in a regional valley system in Greece extending from the Upper Paleolithic until the present. Active field research was conducted by four teams between 1981 and 1990. The first component was a regional archaeological survey. Second, and closely related to the first, was a social anthropological study of modern settlement and land use. Next was a team assigned to excavate the succession of prehistoric settlements of Ancient Nemea on Tsoungiza. Last, historical ecologists, a palynologist, and a geologist formed the environmental component of the research. As a result of advances in electronic publishing, plans for the final publication of the Nemea Valley Archaeological Project have evolved. Complete publication of the excavation of the prehistoric settlements of Ancient Nemea on Tsoungiza will appear in an interactive multimedia format on CD/DVD in Fall 2000. This project is planned to be the first electronic publication of the American School of Classical Studies at Athens. We have chosen to publish in electronic format because it will meet the needs and interests of a wider audience, including avocational archaeologists, advanced high school and college students, graduate students, and professional archaeologists. The multimedia format on CD/DVD will permit the inclusion of text, databases, color and black-and-white images, two and three-dimensional graphics, and videos. This publication is being developed in cooperation with Learning Sites, Inc., which specializes in interactive three-dimensional reconstructions of ancient worlds http://www.learningsites.com. The Nemea Valley Archaeological Project is particularly well prepared for the shift towards electronic publishing because the project's field records were designed for and entered in computer databases from the inception of the project. Attention to recording precise locational information for all excavated objects enables us to place reconstructions of objects in their reconstructed architectural settings. Three-dimensional images of architectural remains and associated features will appear both as excavated and as reconstructed. Viewers will be able to navigate these images through the use of virtual reality. Viewers will also be able to reference all original drawings, photographs, and descriptions of the reconstructed architecture and objects. In this way a large audience will be able to view architectural remains, artifacts, and information that are otherwise inaccessible.
series	other
last changed	2003/04/23 15:14

_id	85bb
authors	Eastman, Charles M.
year	1981
title	Computers in Architecture, Design, and Fine and Performing Arts Education
source	5, [6] p. May, 1981
summary	In the next ten years it is expected that the processes and techniques for teaching design will greatly change. Feedback on design decisions - visually and analytically - will be fast and more powerful than is possible today. Much of the busy paper and pencil construction work will be eliminated or greatly reduced. The author anticipates students designing buildings and artifacts on the computer, quickly and with sophistication, achieving results beyond what can be expected through manually based education today. This proposal cannot realize this whole revolution. Rather, it attempts to only take a step outward from the neck of a funnel, showing people opportunities and providing a framework that allows easy extension. Some of these extensions, most of them trivial to develop, are presented in the scenario section of the proposal
keywords	architecture, design, education, CAD
series	CADline
email
last changed	2003/05/17 10:15

_id	01bb
authors	Er, M.C.
year	1981
title	A Representation Approach to the Tower of Hanoi Problem
source	22 p. : ill. Wollongong: Department of Computing Science, University of Wollongong, August, 1981. includes bibliography
summary	By making the moving direction of each disc explicit in the representation, a bit-string so constructed can be used to drive the Tower of Hanoi algorithm. The behavior of disc moves is further analyzed based on the bit-string representation. It has been shown that the bit-string for moving n discs can be used to generate successively the Gray codes of n bits
keywords	representation, programming, combinatorics, algorithms, recursion
series	CADline
last changed	2003/06/02 13:58

_id	c74f
authors	Guedj, Richard A.
year	1981
title	Towards Better Interactive Systems : Methodology and Problems in Human-Computer Interaction
source	North-Holland Pub. Co., 1981. pp. 89-102. includes bibliography
summary	Understanding human-computer interaction is an issue which is gaining more attention. Significant progress in the design of better interactive systems will come through a needed methodology. Facts and beliefs about interaction are recalled. Four approaches to a conceptual framework which have been advanced are sketched. Some problems are outlined. This paper draws attention on the results of a recent IFIP workshop on Methodology of Interaction, the Seillac-II workshop
keywords	user interface, methodology, CAD, design, methods,
series	CADline
last changed	2003/06/02 10:24

_id	acadia03_052
id	acadia03_052
authors	Juyal, M., Kensek, K. and Knowles, R.
year	2003
title	SolCAD: 3D Spatial Design Tool Tool to Generate Solar Envelope
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 411-419
doi	https://doi.org/10.52842/conf.acadia.2003.411
summary	In this research the concept of Solar Envelope has been used to develop a 3D Spatial Design Tool tool, SolCAD, for generating an envelope over a given site based on various design parameters. The solar envelope can be imagined as a container, whose boundaries are derived from the sun’s relative motion. Buildings within this container will not overshadow their surroundings during critical periods of solar access for passive and low-energy architecture. The solar envelope is a space-time construct. Its spatial limits are defined by the parameters of land parcel size, shape, orientation, topography and latitude. It also depends on the time or the period of the time for which it is designed. Its time limits are defined by the hours of each day and the season for which solar access is provided to the land parcel (Knowles 1981). This tool intends to generate an envelope over a site of any shape, size and orientation and for different boundary and height conditions of shadow lines. It is suitable for initial stages of building design process to determine the shape of the building even before the design has been conceptualized.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	20b5
authors	Kalay, Yehuda E.
year	1981
title	Interactive Shape Generation and Spatial Conflict Testing
source	ACM IEEE Design Automation Conference Proceedings (18th : 1981 : Nashville, Tennessee). pp. 75-81 : ill. includes bibliography
summary	A general purpose, research oriented, interactive modeling system is presented. It is based on two different coherent polyhedral shape representations: a planar graph, used for computation and data manipulation, and relational-database for compact store and general communication with application programs. The two representations effectively partition the system shape-space into active and inactive shapes, respectively. These are explicitly interchangeable by the user, keeping the actual workspace at a manageable size. The basic functionalities provided by the system include the combination of primitive shapes into complex objects by means of spatial set operators (union, intersection and difference), their modeling by means of scaling, rotation and translation, spatial interference detection and graphical display capabilities
keywords	geometric modeling, solid modeling, representation, boolean operations, B-rep, intersection
series	CADline
email
last changed	2003/06/02 13:58

_id	acadia23_v3_211
id	acadia23_v3_211
authors	Kataw, Hanan
year	2023
title	ACADIA’s Open Call: Expanding the Narrative of Diversity and Inclusion in Computational Design
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 3: Proceedings of the 43rd Annual Conference for the Association for Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9891764-1-0]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 24-32.
summary	The Association for Computer Aided Design in Architecture (ACADIA) was founded on October 17, 1981. The first meeting was held at Carnegie-Mellon University and attended by 24 founding members. When the history of ACADIA is discussed, out of these two dozen founders, three are frequently noted: William Mitchell, Charles Eastman, and Chris Yessios. Mitchell was a pioneer in computer-aided design and smart cities research and is, as Wassim Jabi, ACADIA’s 21st president put it, “one of ACADIA’s most famous founding members.”1 Eastman was not only ACADIA’s first president, but also one of the leading figures in the history of Building Information Modeling (BIM) and is often referred to as “the father of BIM.” Yessios is widely known for his work at Ohio State University and his role in developing Form.Z.
series	ACADIA
email
last changed	2024/04/17 14:00

For more results click below: