Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 60

Reformat results as: short short into frame detailed detailed into frame

_id	a8d1
authors	Galle, Per
year	1981
title	An Algorithm for Exhaustive Generation of Building Floor Plans
source	Communications of the ACM December, 1981. vol. 2: pp.813-823, [3] : ill. includes bibliography.
summary	The combinatorial complexity of most floor plan design problems makes it practically impossible to obtain a systematic knowledge of possible solutions using pencil and paper. The objective of this paper is to contribute to the development of computer methods providing such knowledge for the designer. The paper describes an algorithm which generates all possible rectangular plans on modular grids with congruent cells, subject to constraints on total area, room areas, wall lengths, room adjacencies, and room orientations. To make room sizes regular and limit the solution set only, such grids are used which minimize the number of cells in the smallest room. The description is sufficiently detailed to serve as a basis for programming. Test results for a Pascal implementation of the algorithm are reported. Realistic problems up to ten rooms have been solved in modest length of computer time. The results indicate that the approach of exhaustive generation may prove to be more fruitful than generally assumed
keywords	architecture, floor plans, automation, design, planning, algorithms, combinatorics, grids, constraints, synthesis
series	CADline
last changed	1999/02/12 15:08

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	2f1a
authors	Dabney, M.K., Wright, J.C. and Sanders, D.H.
year	1999
title	Virtual Reality and the Future of Publishing Archaeological Excavations: the multimedia publication of the prehistoric settlement on Tsoungiza at Ancient Nemea
source	New York: The Metropolitan Museum of Art
summary	The Nemea Valley Archaeological Project is a study of settlement and land use in a regional valley system in Greece extending from the Upper Paleolithic until the present. Active field research was conducted by four teams between 1981 and 1990. The first component was a regional archaeological survey. Second, and closely related to the first, was a social anthropological study of modern settlement and land use. Next was a team assigned to excavate the succession of prehistoric settlements of Ancient Nemea on Tsoungiza. Last, historical ecologists, a palynologist, and a geologist formed the environmental component of the research. As a result of advances in electronic publishing, plans for the final publication of the Nemea Valley Archaeological Project have evolved. Complete publication of the excavation of the prehistoric settlements of Ancient Nemea on Tsoungiza will appear in an interactive multimedia format on CD/DVD in Fall 2000. This project is planned to be the first electronic publication of the American School of Classical Studies at Athens. We have chosen to publish in electronic format because it will meet the needs and interests of a wider audience, including avocational archaeologists, advanced high school and college students, graduate students, and professional archaeologists. The multimedia format on CD/DVD will permit the inclusion of text, databases, color and black-and-white images, two and three-dimensional graphics, and videos. This publication is being developed in cooperation with Learning Sites, Inc., which specializes in interactive three-dimensional reconstructions of ancient worlds http://www.learningsites.com. The Nemea Valley Archaeological Project is particularly well prepared for the shift towards electronic publishing because the project's field records were designed for and entered in computer databases from the inception of the project. Attention to recording precise locational information for all excavated objects enables us to place reconstructions of objects in their reconstructed architectural settings. Three-dimensional images of architectural remains and associated features will appear both as excavated and as reconstructed. Viewers will be able to navigate these images through the use of virtual reality. Viewers will also be able to reference all original drawings, photographs, and descriptions of the reconstructed architecture and objects. In this way a large audience will be able to view architectural remains, artifacts, and information that are otherwise inaccessible.
series	other
last changed	2003/04/23 15:14

_id	acadia03_052
id	acadia03_052
authors	Juyal, M., Kensek, K. and Knowles, R.
year	2003
title	SolCAD: 3D Spatial Design Tool Tool to Generate Solar Envelope
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 411-419
doi	https://doi.org/10.52842/conf.acadia.2003.411
summary	In this research the concept of Solar Envelope has been used to develop a 3D Spatial Design Tool tool, SolCAD, for generating an envelope over a given site based on various design parameters. The solar envelope can be imagined as a container, whose boundaries are derived from the sun’s relative motion. Buildings within this container will not overshadow their surroundings during critical periods of solar access for passive and low-energy architecture. The solar envelope is a space-time construct. Its spatial limits are defined by the parameters of land parcel size, shape, orientation, topography and latitude. It also depends on the time or the period of the time for which it is designed. Its time limits are defined by the hours of each day and the season for which solar access is provided to the land parcel (Knowles 1981). This tool intends to generate an envelope over a site of any shape, size and orientation and for different boundary and height conditions of shadow lines. It is suitable for initial stages of building design process to determine the shape of the building even before the design has been conceptualized.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	e56f
authors	Milne, Murry, Liggett, Robin S. and Campbell, Carol-Lynn (et al)
year	1981
title	An Interactive Computer Graphic Daylighting Design Tool
source	1981? pp. 99-103: graphs. includes bibliography
summary	A fast simple interactive computer program which plots daylight curves has been developed for hands-on use by architects at the beginning of the design process. It calculates daylight illuminations levels using the well known IES/LOF method. The most important feature of the program is its friendly interface, which means that designers with no computer literacy can easily describe their building and quickly progress through as many design modifications as desired. The program is self-instructional, giving first-time users a demonstration of its various features, then inviting them to go back and put their own building. The program is written in FORTRAN IV and runs on Tektronix storage tube graphics terminal
keywords	evaluation, analysis, algorithms, computer graphics, lighting, user interface
series	CADline
email
last changed	2003/06/02 13:58

_id	sigradi2008_166
id	sigradi2008_166
authors	Papanikolaou, Dimitris
year	2008
title	Digital Fabrication Production System Theory: Towards an Integrated Environment for Design and Production of Assemblies
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	A Digital Fabrication Production System (DFPS) is a concept describing a set of processes, tools, and resources that will be able to produce an artifact according to a design, fast, cheap, and easy, independently of location. A DFPS project is a complex assembly of custom parts that is delivered by a network of fabrication and assembly processes. This network is called the value chain. The workflow concept of a DFPS is the following: begin design process with a custom geometric form; decompose it into constructible parts; send the part files for fabrication to various locations; transport all parts at the construction site at the right time; finally, assemble the final artifact. Conceptually it means that based on a well structured value chain we could build anything we want, at anyplace, at controllable cost and quality. The goals of a DFPS are the following: custom shapes, controllable lead time, controllable quality, controllable cost, easiness of fabrication, and easiness of assembly. Simply stated this means to build any form, anywhere, accurately, cheap, fast, and easy. Unfortunately, the reality with current Digital Fabrication (DF) projects is rather disappointing: They take more time than what was planned, they get more expensive than what was expected, they involve great risk and uncertainty, and finally they are too complex to plan, understand, and manage. Moreover, most of these problems are discovered during production when it is already late for correction. However, there is currently no systematic approach to evaluate difficulty of production of DF projects in Architecture. Most of current risk assessment methods are based on experience gathered from previous similar cases. But it is the premise of mass customization that projects can be radically different. Assembly incompatibilities are currently addressed by building physical mockups. But physical mockups cause a significant loss in both time and cost. All these problems suggest that an introduction of a DFPS for mass customization in architecture needs first an integrated theory of assembly and management control. Evaluating feasibility of a DF project has two main problems: first, how to evaluate assemblability of the design; second, how to evaluate performance of the value chain. Assemblability is a system’s structure problem, while performance is a system’s dynamics problem. Structure of systems has been studied in the field of Systems Engineering by Network Analysis methods such as the Design Structure Matrix (DSM) (Steward 1981), and the liaison graph (Whitney 2004), while dynamics of systems have been studied by System Dynamics (Forrester 1961). Can we define a formal method to evaluate the difficulty of production of an artifact if we know the artifact’s design and the production system’s structure? This paper formulates Attribute Process Methodology (APM); a method for assessing feasibility of a DFPS project that combines Network Analysis to evaluate assemblability of the design with System Dynamics to evaluate performance of the value chain.
keywords	Digital Fabrication, Production System, System Dynamics, Network Analysis, Assembly
series	SIGRADI
email
last changed	2016/03/10 09:57

_id	a664
authors	Samet, Hanan
year	1981
title	Connected Component Labeling Using Quadtrees
source	Journal of the Association for Computing Machinery. July, 1981. vol. 23: pp. 487-501 : ill. includes bibliography
summary	An algorithm is presented for labeling the connectedÔ h)000*°° ÔŒ components of an image represented by a quadtree. The algorithm proceeds by exploring all possible adjacencies for each node once and only once. As soon as this is done, any equivalences generated by the adjacency labeling phase are propagated. Analysis of the algorithm reveals that its average execution time is of the order O(W+B(logB)), where B and W correspond to the number of blocks comprising the foreground and background, respectively, of the image
keywords	algorithms, quadtree, image processing, pattern recognition, representation
series	CADline
last changed	1999/02/12 15:09

_id	4e6e
authors	Liu, Clive K. and Eastman, Charles M.
year	1981
title	Object Grammars : Language for the Generation of Masonry Designs
source	20 p. ; ill April, 1981. includes bibliography.
summary	Bricks, one of the oldest manufactured building materials, are used extensively in construction. Usually they are built into wall assemblies. In this paper, the construction of traditional masonry designs are investigated. Object grammars are defined for the recursive generation of the 3 dimensional wall designs. Also, the uses of object grammars are discussed
keywords	shape grammars, objects, synthesis, assemblies, architecture, applications
series	CADline
email
last changed	2003/06/02 13:58

_id	a6f1
authors	Bridges, A.H.
year	1986
title	Any Progress in Systematic Design?
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 5-15
summary	In order to discuss this question it is necessary to reflect awhile on design methods in general. The usual categorization discusses 'generations' of design methods, but Levy (1981) proposes an alternative approach. He identifies five paradigm shifts during the course of the twentieth century which have influenced design methods debate. The first paradigm shift was achieved by 1920, when concern with industrial arts could be seen to have replaced concern with craftsmanship. The second shift, occurring in the early 1930s, resulted in the conception of a design profession. The third happened in the 1950s, when the design methods debate emerged; the fourth took place around 1970 and saw the establishment of 'design research'. Now, in the 1980s, we are going through the fifth paradigm shift, associated with the adoption of a holistic approach to design theory and with the emergence of the concept of design ideology. A major point in Levy's paper was the observation that most of these paradigm shifts were associated with radical social reforms or political upheavals. For instance, we may associate concern about public participation with the 1970s shift and the possible use (or misuse) of knowledge, information and power with the 1980s shift. What has emerged, however, from the work of colleagues engaged since the 1970s in attempting to underpin the practice of design with a coherent body of design theory is increasing evidence of the fundamental nature of a person's engagement with the design activity. This includes evidence of the existence of two distinctive modes of thought, one of which can be described as cognitive modelling and the other which can be described as rational thinking. Cognitive modelling is imagining, seeing in the mind's eye. Rational thinking is linguistic thinking, engaging in a form of internal debate. Cognitive modelling is externalized through action, and through the construction of external representations, especially drawings. Rational thinking is externalized through verbal language and, more formally, through mathematical and scientific notations. Cognitive modelling is analogic, presentational, holistic, integrative and based upon pattern recognition and pattern manipulation. Rational thinking is digital, sequential, analytical, explicatory and based upon categorization and logical inference. There is some relationship between the evidence for two distinctive modes of thought and the evidence of specialization in cerebral hemispheres (Cross, 1984). Design methods have tended to focus upon the rational aspects of design and have, therefore, neglected the cognitive aspects. By recognizing that there are peculiar 'designerly' ways of thinking combining both types of thought process used to perceive, construct and comprehend design representations mentally and then transform them into an external manifestation current work in design theory is promising at last to have some relevance to design practice.
series	CAAD Futures
email
last changed	2003/11/21 15:16

_id	91c4
authors	Checkland, P.
year	1981
title	Systems Thinking, Systems Practice
source	John Wiley & Sons, Chichester
summary	Whether by design, accident or merely synchronicity, Checkland appears to have developed a habit of writing seminal publications near the start of each decade which establish the basis and framework for systems methodology research for that decade."" Hamish Rennie, Journal of the Operational Research Society, 1992 Thirty years ago Peter Checkland set out to test whether the Systems Engineering (SE) approach, highly successful in technical problems, could be used by managers coping with the unfolding complexities of organizational life. The straightforward transfer of SE to the broader situations of management was not possible, but by insisting on a combination of systems thinking strongly linked to real-world practice Checkland and his collaborators developed an alternative approach - Soft Systems Methodology (SSM) - which enables managers of all kinds and at any level to deal with the subtleties and confusions of the situations they face. This work established the now accepted distinction between hard systems thinking, in which parts of the world are taken to be systems which can be engineered, and soft systems thinking in which the focus is on making sure the process of inquiry into real-world complexity is itself a system for learning. Systems Thinking, Systems Practice (1981) and Soft Systems Methodology in Action (1990) together with an earlier paper Towards a Systems-based Methodology for Real-World Problem Solving (1972) have long been recognized as classics in the field. Now Peter Checkland has looked back over the three decades of SSM development, brought the account of it up to date, and reflected on the whole evolutionary process which has produced a mature SSM. SSM: A 30-Year Retrospective, here included with Systems Thinking, Systems Practice closes a chapter on what is undoubtedly the most significant single research programme on the use of systems ideas in problem solving. Now retired from full-time university work, Peter Checkland continues his research as a Leverhulme Emeritus Fellow. "
series	other
last changed	2003/04/23 15:14

_id	a8ca
authors	Courtieux, Gerard
year	1981
title	Man Machine Interface Problems in Computer Aided Architectural Design
source	1981. pp. 231-250 : ill. includes bibliography. -- discussion (pp. 247-250)
summary	The author and two other researchers conducted a world-wide survey of existing computer aided architectural design programs in 1978. The purpose of the survey was to validate an earlier study of the architectural design process and to investigate problem areas in Computer Aided Architectural Design (CAAD). The survey indicated that two problems of man machine interaction in CAAD, though partly solved, remain a challenge for computer scientists: the description and graphical representation of three-dimensional objects. The formalization of the information collected in the survey, together with the experience of the author in teaching computer graphics to architecture students for the past ten years, is used to give some insight in these two problems and to make some recommendations for the improvement of the man machine interface in CAAD
keywords	architecture, CAD, user interface
series	CADline
last changed	1999/02/12 15:07

_id	a5c3
authors	Er, M.C.
year	1981
title	The Relations of the Computation of Fibonnaci Numbers with the Polyphase Sort
source	8 p. Wollongong: Department of Computing Science, University of Wollongong, September, 1981. includes bibliography
summary	The theory of polyphase sort has simplified the mathematical derivations of Wilson and Shortt's (1980) algorithm, and offered an intuitive explanation of why Gries and Levin's (1980), and Urbanek's (1980) algorithms work. The computation of order-k Fibonacci numbers is equivalent to moving a window of matrix upwards in a series of ideal distributions
keywords	Fibonacci, sorting, mathematics, algorithms
series	CADline
last changed	2003/06/02 13:58

_id	11b4
authors	Hall, Theodore W.
year	2001
title	2001: An Acadia Odyssey
source	ACADIA Quarterly, vol. 20, pp. 6-7
doi	https://doi.org/10.52842/conf.acadia.2001.006
summary	ACADIA marked the dawn of its third decade last October, at its 21st annual conference, the 20th anniversary of its birth. If the numbers seem inconsistent at first, recall that the association was born at its 1st conference, its 0th anniversary, in 1981. Of the twenty-four founding members, only a few are still active. I joined at the third conference, in 1983, and I’ve never met half the founders. Perhaps they never expected the association to last two years, let alone two decades. In the meantime, an entire generation has come of age and begun to take the reins. ACADIA is alive and well, thank you very much.
series	ACADIA
email
last changed	2022/06/07 07:50

_id	28cc
authors	Johnson, Robert H. and Dewhirst, Donald L.
year	1981
title	Machine Layout With Volumetric Models
source	International Congress and Exposition. February, 1981. 7 p. : ill. includes bibliography. --- An SAE Technical Paper Series
summary	Computer-Aided Engineering Systems are interactive computer based systems for application to a wide variety of engineering and manufacturing functions. Volumetric models and a structured database are two key components of these systems. This paper presents the concept of a product structures Data Base and its use in combination with volumetric models, in the layout phase of a machine design. This combination provides for automatic analysis of interface and fit between parts of a machine
keywords	CAE, solid modeling, representation, systems, CAM, integration, database
series	CADline
last changed	2003/06/02 13:58

_id	a9b5
authors	Johnson, Robert H.
year	1981
title	DESIGN: An Integrated System for CAD and CAM
source	CAM-I International Spring Seminar, 10 p.
summary	DESIGN is an advanced development of a computer aided engineering system to be applied to the design and engineering of mechanical systems. Engineering projects where DESIGN may be applied range from small assemblies to large complex mechanical systems such as a machining center or a motor vehicle. This paper provides a systematic overview of DESIGN. Examples of parts and assemblies created with DESIGN are shown.
keywords	Integration, CAD, Systems, CAM, Engineering, CAE, Mechanical Engineering, Assemblies, Software
series	CADline
last changed	1999/02/15 15:25

_id	4bd7
authors	Kalay, Yehuda E.
year	1981
title	Recursive Subdivision of Rectangular Bicubic Bezier Patches Using Patch Re-Parametrization
source	October, 1981. 7 p. : ill. includes bibliography
summary	This paper presents an analytical approach for the subdivision of curved surfaces made of rectangular patches, exploiting the properties of the Bernstein-Bezier surface representation. It is presented and demonstrated for the recursive subdivision of a patch into 4 sub-patches. It utilizes the linear dependency between the parametric vectors and the surface to re-parametrize the equation of the patch, and builds a quadtree of the patches. This method is useful for reducing the curvature of individual patches until some arbitrary criterion of planarity has been reached. Once reach, patches can be intersected analytically, to find the locus of intersection between two curved surfaces
keywords	recursion, algorithms, Bezier, parametrization, curves, curved surfaces, intersection
series	CADline
email
last changed	2003/06/02 13:58

_id	82a8
authors	Kutay, Ali R.
year	1981
title	Multi-User Concurrent Design Databases
source	May 14, 1981. [1] 27 p. includes bibliography
summary	Developing comprehensive computer models of engineering systems is an important research effort. These models are planned to support design, analysis, optimization and production of these systems by providing a common integrated source of data. They are also expected to support multiple users accessing them concurrently so that parallel development of the system is enabled. This paper looks at the concurrency control problem in computer models of engineering design. It reviews the major aspects of database systems which are the tools of modelling, and identifies different representations used in the design process. With this as the context, the paper surveys the basic mechanisms for concurrency control in database systems. It then classifies the different degrees of concurrency in different representations of the design process
keywords	engineering, design, database, concurrency, CAD
series	CADline
last changed	2003/06/02 13:58

_id	16c7
authors	Li, Andrew I-Kang
year	2000
title	Integrating Symbolic and Spatial Information in Shape Grammars, with an Example from Traditional Chinese Architecture
source	CAADRIA 2000 [Proceedings of the Fifth Conference on Computer Aided Architectural Design Research in Asia / ISBN 981-04-2491-4] Singapore 18-19 May 2000, pp. 245-253
doi	https://doi.org/10.52842/conf.caadria.2000.245
summary	Stiny's (1981) formulation of descriptions is applied to building sections and their descriptions found in the twelfth-century Chinese building manual Yingzao fashi.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	c327
authors	Liu, Clive K.
year	1981
title	A Graphic Processor for Computer-Aided Engineering Drawing
source	October, 1981. 7 p
summary	A drafting system whose purpose of is to provide an advanced tool for teaching engineering drawing and as a production tool for designers who regularly produce engineering drawings is described. The graphic processor is part of the system, which incorporates a set of operations that produce and manipulate graphic entities and that require graphic entities as operands. This paper examines the issues of constructing such a processor. Representations are proposed for 2D graphic objects, including points, line segments and segments generated by conic sections; which are predefined data types in the system. The geometric primitive operators take these objects as arguments and produce other graphic objects, and allow users to build up various construction operators and drawings with the same flexibility and generality allowed in, say, descriptive geometry. These operators, which are functions, can be combined as macro expressions that executed by the processor. This environment allows users to define their own macros for various tasks
keywords	CAD, drafting, education, tools
series	CADline
last changed	2003/06/02 13:58

_id	8d0f
authors	Pattis, Richard E.
year	1981
title	Karel the Robot : A Gentle Introduction to the Art of Programming
source	New York: John Wiley & sons Inc., 1981
summary	An introduction to programming in PASCAL. The book is arranged as a full programming course including homework problems for the students
keywords	programming, languages, PASCAL
series	CADline
last changed	2003/06/02 10:24

For more results click below: