Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 77

Reformat results as: short short into frame detailed detailed into frame

_id	1b10
id	1b10
authors	Bay, Joo-Hwa
year	2001
title	Cognitive Biases - The case of tropical architecture
source	Delft University of Technology
summary	This dissertation investigates, i) How cognitive biases (or illusions) may lead to errors in design thinking, ii) Why architects use architectural precedents as heuristics despite such possible errors, and iii) Develops a design tool that can overcome this type of errors through the introduction of a rebuttal mechanism. The mechanism controls biases and improves accuracy in architectural thinking. // The research method applied is interdisciplinary. It employs knowledge from cognitive science, environmental engineering, and architectural theory. The case study approach is also used. The investigation is made in the case of tropical architecture. The investigation of architectural biases draws from work by A. Tversky and D. Kahneman in 1982 on “Heuristics and biases”. According to Tversky and Kahneman, the use of heuristics of representativeness (based on similarity) and availability (based on ease of recall and imaginability) for judgement of probability can result in cognitive biases of illusions of validity and biases due to imaginability respectively. This theory can be used analogically to understand how errors arise in the judgement of environmental behaviour anticipated from various spatial configurations, leading to designs with dysfunctional performances when built. Incomplete information, limited time, and human mental resources make design thinking in practice difficult and impossible to solve. It is not possible to analyse all possible alternative solutions, multiple contingencies, and multiple conflicting demands, as doing so will lead to combinatorial explosion. One of the ways to cope with the difficult design problem is to use precedents as heuristic devices, as shortcuts in design thinking, and at the risk of errors. This is done with analogical, pre-parametric, and qualitative means of thinking, without quantitative calculations. Heuristics can be efficient and reasonably effective, but may not always be good enough or even correct, because they can have associated cognitive biases that lead to errors. Several debiasing strategies are discussed, and one possibility is to introduce a rebuttal mechanism to refocus the designer’s thinking on the negative and opposite outcomes in his judgements, in order to debias these illusions. The research is carried out within the framework of design theory developed by the Design Knowledge System Research Centre, TUDelft. This strategy is tested with an experiment. The results show that the introduction of a rebuttal mechanism can debias and improve design judgements substantially in environmental control. The tool developed has possible applications in design practice and education, and in particular, in the designing of sustainable environments.
keywords	Design bias; Design knowledge; Design rebuttal; Design Precedent; Pre-parametric design; Tropical architecture; Sustainability
series	thesis:PhD
type	normal paper
email
last changed	2006/05/28 07:42

_id	sigradi2006_e183a
id	sigradi2006_e183a
authors	Costa Couceiro, Mauro
year	2006
title	La Arquitectura como Extensión Fenotípica Humana - Un Acercamiento Basado en Análisis Computacionales [Architecture as human phenotypic extension – An approach based on computational explorations]
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 56-60
summary	The study describes some of the aspects tackled within a current Ph.D. research where architectural applications of constructive, structural and organization processes existing in biological systems are considered. The present information processing capacity of computers and the specific software development have allowed creating a bridge between two holistic nature disciplines: architecture and biology. The crossover between those disciplines entails a methodological paradigm change towards a new one based on the dynamical aspects of forms and compositions. Recent studies about artificial-natural intelligence (Hawkins, 2004) and developmental-evolutionary biology (Maturana, 2004) have added fundamental knowledge about the role of the analogy in the creative process and the relationship between forms and functions. The dimensions and restrictions of the Evo-Devo concepts are analyzed, developed and tested by software that combines parametric geometries, L-systems (Lindenmayer, 1990), shape-grammars (Stiny and Gips, 1971) and evolutionary algorithms (Holland, 1975) as a way of testing new architectural solutions within computable environments. It is pondered Lamarck´s (1744-1829) and Weismann (1834-1914) theoretical approaches to evolution where can be found significant opposing views. Lamarck´s theory assumes that an individual effort towards a specific evolutionary goal can cause change to descendents. On the other hand, Weismann defended that the germ cells are not affected by anything the body learns or any ability it acquires during its life, and cannot pass this information on to the next generation; this is called the Weismann barrier. Lamarck’s widely rejected theory has recently found a new place in artificial and natural intelligence researches as a valid explanation to some aspects of the human knowledge evolution phenomena, that is, the deliberate change of paradigms in the intentional research of solutions. As well as the analogy between genetics and architecture (Estévez and Shu, 2000) is useful in order to understand and program emergent complexity phenomena (Hopfield, 1982) for architectural solutions, also the consideration of architecture as a product of a human extended phenotype can help us to understand better its cultural dimension.
keywords	evolutionary computation; genetic architectures; artificial/natural intelligence
series	SIGRADI
email
last changed	2016/03/10 09:49

_id	a747
authors	Eastman, Charles M.
year	1982
title	Recent Developments in Representation in the Science of Design
source	9 p. : ill. Pittsburgh: Design Research Center, CMU, April, 1982. includes bibliography
summary	A recent goal in computer aided design is the representation of a design artifact in a form sufficient to support all analyses and to determine that the design is realizable. In this paper, the implications of the development of computer representations for design specifications are reviewed, some components of a theory of design representations are discussed, and the benefits of such a theory outlined
keywords	CAD, theory, design, representation, architecture, geometric modeling
series	CADline
email
last changed	2003/05/17 10:15

_id	c7cd
authors	Foley, James D. and Van Dam, Andrias
year	1982
title	Fundamentals of Interactive Computer Graphics
source	xx, 664 p. [12] plates : ill. (some col.) Reading, Mass.: Addison Wesley Pub. Co., 1982. includes bibliography: p.625-653 and index. -- (System Programming Series)
summary	Presents different aspects of interactive computer graphics programming: hardware, software, data structures, mathematical manipulation of graphical objects, the development of a 3D geometrical transformations, and an implementation strategy for a subroutine package based on the core system
keywords	computer graphics, software, programming, theory, practice
series	CADline
last changed	2003/06/02 13:58

_id	5509
authors	Koutamanis, Alexandros
year	1990
title	Development of a computerized handbook of architectural plans
source	Delft University of Technology
summary	The dissertation investigates an approach to the development of visual / spatial computer representations for architectural purposes through the development of the computerized handbook of architectural plans (chap), a knowledge-based computer system capable of recognizing the metric properties of architectural plans. This investigation can be summarized as an introduction of computer vision to the computerization of architectural representations: chap represents an attempt to automate recognition of the most essential among conventional architectural drawings, floor plans. The system accepts as input digitized images of architectural plans and recognizes their spatial primitives (locations) and their spatial articulation on a variety of abstraction levels. The final output of chap is a description of the plan in terms of the grouping formations detected in its spatial articulation. The overall structure of the description is based on an analysis of its conformity to the formal rules of its “stylistic” context (which in the initial version of chap is classical architecture). Chapter 1 suggests that the poor performance of computerized architectural drawing and design systems is among others evidence of the necessity to computerize visual / spatial architectural representations. A recognition system such as chap offers comprehensive means for the investigation of a methodology for the development and use of such representations. Chapter 2 describes a fundamental task of chap: recognition of the position and shape of locations, the atomic parts of the description of an architectural plan in chap. This operation represents the final and most significant part of the first stage in processing an image input in machine environment. Chapter 3 moves to the next significant problem, recognition of the spatial arrangement of locations in an architectural plan, that is, recognition of grouping relationships that determine the subdivision of a plan into parts. In the absence of systematic and exhaustive typologic studies of classical architecture that would allow us to define a repertory of the location group types possible in classical architectural plans, Chapter 3 follows a bottom-up approach based on grouping relationships derived from elementary architectural knowledge and formalized with assistance from Gestalt theory and its antecedents. The grouping process described in Chapter 3 corresponds both in purpose and in structure to the derivation of a description of an image in computer vision [Marr 1982]. Chapter 4 investigates the well-formedness of the description of a classical architectural plan in an analytical manner: each relevant level (or sublevel) of the classical canon according to Tzonis & Lefaivre [1986] is transformed into a single group of criteria of well-formedness which is investigated independently. The hierarchical structure of the classical canon determines the coordination of these criteria into a sequence of cognitive filters which progressively analyses the correspondence of the descriptions derived as in Chapter 3 to the constraints of the canon. The methodology and techniques presented in the dissertation are primarily considered with respect to chap, a specific recognition system. The resulting specification of chap gives a measure of the use of such a system within the context of a computerized collection of architectural precedents and also presents several extensions to other areas of architecture. Although these extensions are not considered as verifiable claims, Chapter 5 describes some of their implications, including on the role of architectural drawing in computerized design systems, on architectural typologies, and on the nature and structure of generative systems in architecture.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	fafa
authors	Marr, David
year	1982
title	Vision: A Computational Investigation into the Human Representation and Processing of Visual Information
source	New York, NY: W.H. Freeman and Company
summary	Marr's demonstrations that retinal receptive field geometry could be derived by Fourier transformation of spatial frequency sensitivity data, that edges and contours could be detected by finding zero crossings in the light gradient by taking the Laplacian or second directional derivative, that excitatory and inhibitory receptive fields could be constructed from "DOG" functions (the difference of two Gaussians), and that the visual system used a two-dimensional convolution integral with a Gaussian prefilter as an operator for bandwidth optimation on the retinal light distribution, were more powerful than anything that had been seen up to that time. It was as if vision research suddenly acquired its own Principia Mathematica, or perhaps General Relativity Theory, in terms of the new explanatory power Marr's theories provided. Truly an extraordinary book from an extraordinary thinker in the area of perception, vision, and the brain.
series	other
last changed	2003/04/23 15:14

_id	e55f
authors	Newell, Allen and Rosenbloom, Paul S.
year	1982
title	Mechanisms of Skill Acquisition and the Law of Practice
source	[2], III, 52 p. : ill Design Research Center, CMU, April, 1982. DRC-15-16-82. includes bibliography.
summary	Practice, and the performance improvement that it engenders, has long been a major topic in psychology. In this paper, both experimental and theoretical approaches are employed in an investigation of the mechanisms underlying this improvement. On the experimental side, it is argued that a single law, the power of law of practice, adequately describes all of the practice data. On the theoretical side, a model of practice rooted in modern cognitive psychology, the chunking theory of learning, is formulated. The paper consists of (1) the presentation of a set of empirical practice curves; (2) mathematical investigations into the nature of power law functions; (3) evaluations of the ability of three different classes of functions to adequately model the empirical curves; (4) a discussion of the existing models of practice; (5) a presentation of the chunking theory of learning
keywords	problem solving, learning, psychology, knowledge acquisition, practice, expert, representation
series	CADline
last changed	2003/06/02 13:58

_id	611a
authors	Newell, Allen
year	1982
title	The Knowledge Level
source	[2]. 46 p. : ill. Design Research Center, CMU, April, 1982. DRC-15-15-82. includes bibliography
summary	As the first AAAI Presidential Address, this paper focuses on a basic substantive problem: the nature of knowledge and representation. There are ample indications that artificial intelligence is in need of substantial work in this area, e.g., a recent SIGART special issue on Knowledge Representation edited by Ron Brachman and Brian Smith. The paper proposes a theory of the nature of knowledge, namely, that there is another computer system level immediately above the symbol (or program) level. The nature of computer system levels is reviewed, the new level proposed, and its definition is treated in detail. Knowledge itself is the processing medium at this level and the principle of rationality plays a central role. Some consequences of the existence of the knowledge level and some relations to other fields are discussed
keywords	knowledge, representation, AI
series	CADline
last changed	1999/02/12 15:09

_id	e1d1
authors	Shafer, Steven A. and Kanade, Takeo
year	1982
title	Using Shadows in Finding Surface Orientations
source	61 p. : ill.` Pittsburgh, PA: Department of Computer Science, CMU, January, 1982. CMU-CS- 82-100
summary	Given a line drawing from an image with shadow regions identified, the shapes of the shadows can be used to generate constraints on the orientations of the surfaces involved. This paper describes the theory which governs those constraints under orthography. A 'Basic Shadow Problem' is first posed, in which there is a single light source, and a single surface casts a shadow on another (background) surface. There are six parameters to determine: the orientation (2 parameters) for each surface, and the direction of the vector (2 parameters) pointing at the light source. If some set of 3 of these are given in advance, the remaining 3 can then be determined geometrically
keywords	The solution method consists of identifying 'illumination surfaces' consisting of illumination vectors, assigning Huffman-Clowes line labels to
series	CADline
last changed	2003/06/02 13:58

_id	0107
authors	Akin, Omer and Weinel, Eleanor F. (editors)
year	1982
title	Representation and Architecture
source	v, 285 p. : ill. Silver Spring, Maryland: Information Dynamics, Inc., 1982
summary	A collection of papers developed from the proceeding of the Northeastern Regional meeting of the Association of Collegiate Schools of Architecture (ACSA), held at the Department of Architecture, Carnegie Mellon University. The introduction includes articles about representation, representation and architecture. Part 1, Who/To Whom speaks about representation and participatory design process, and of a system for recording behavior and occupying of design. Part 2, How: includes Figure, System and Memory, the Process of Design ; Representation and Creativity in Architecture and Miniature Substitutes. Part 3, With What :Information and Data Base in Design : the Computer as a Design Medium, Slides Talk and Translation
keywords	design process, representation, architecture, creativity
series	CADline
email
last changed	2003/05/17 10:09

_id	8a88
authors	Anderson, David P.
year	1982
title	Hidden Line Elimination in Projected Grid Surfaces
source	ACM Transactions on Graphics. October, 1982. vol. 1: pp. 274-288 : ill. includes a short bibliography
summary	The hidden line and hidden surface problems are simpler when restricted to special classes of objects. An example is the class of grid surfaces, that is, graphs of bivariate functions represented by their values on a set of grid points. Projected grid surfaces have geometric properties which permit hidden line or hidden surface elimination to be done more easily than in the general case. These properties are discussed in this paper, and an algorithm is given which exploits them
keywords	algorithms, hidden lines, hidden surfaces, grids, computer graphics
series	CADline
last changed	2003/06/02 10:24

_id	843d
authors	Avron, Barr and Feigenbaum, Edward A. (editors)
year	1982
title	The Handbook of Artificial Intelligence
source	xiii, 428 p. Stanford, California: Heuristech Press, 1982. vol. 2 of 3: Includes bibliography p.383-402 and indexes
summary	Part 2 of a three vol. work. This vol covers: AI programming languages, the kinds of programming languages suitable for AI, features and environments developed that were developed for its purpose. Expert systems in science, medicine and education. The last chapters reviews automatic programming
keywords	AI, programming, languages, expert systems, automation
series	CADline
last changed	2003/06/02 13:58

_id	2045
authors	Balas, Egon
year	1982
title	A Class of Location, Distribution and Scheduling Problems : Modeling and Solution Methods
source	21 p., 8 + 4 p. of appendix : ill. Carnegie Mellon University, Pittsburgh, PA: Design Research Center, December, 1982. includes bibliography
summary	Discusses the potential of set covering techniques. Illustrates problem formulation techniques on several important classes of real-world problems. Also describes a class of algorithms for solving set covering problems, based on cutting planes, heuristics and subgradient optimization
keywords	problem solving, methods, algorithms, problem definition, modeling, optimization, operations research
series	CADline
last changed	1999/02/12 15:07

_id	a426
authors	Barsky, Brian A. and Greenberg, Donald P.
year	1982
title	Interactive Surface Representation System Using a B-spline Formulation with Interpolation Capability
source	computer Aided Design. July, 1982. vol. 14: pp. 187-194 : col.ill. includes bibliography
summary	An interactive surface representation system is described which uses a parametric uniform bicubic B-spline formulation which can describe a surface initially defined to interpolate a specified network of points
keywords	CAD, curved surfaces, computational geometry, interpolation, B-splines
series	CADline
last changed	2003/06/02 13:58

_id	898a
authors	Bay, J.H.
year	2002
title	Cognitive Biases and Precedent Knowledge in Human and Computer-Aided Design Thinking
doi	https://doi.org/10.52842/conf.caadria.2002.213
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 213-220
summary	Cognitive biases (illusions) and potential errors can occur when using precedent knowledge for analogical, pre-parametric and qualitative design thinking. This paper refers largely to part of a completed research (Bay 2001) on how heuristic biases, discussed by Tversky and Kahneman (1982) in cognitive psychology, can affect judgement and learning of facts from precedents in architectural design, made explicit using a kernel of conceptual system (Tzonis et. al., 1978) and a framework of architectural representation (Tzonis 1992). These are used here to consider how such illusions and errors may be transferred to computer aided design thinking.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	cf2003_m_040
id	cf2003_m_040
authors	BAY, Joo-Hwa
year	2003
title	Making Rebuttals Available Digitally for Minimising Biases in Mental Judgements
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 147-156
summary	The problem of heuristic biases (illusions) discussed by Tversky and Kahneman (1982) that can lead to errors in judgement by human designers, when they use precedent knowledge presented graphically (Bay 2001). A Cognitive framework of belief, goal, and decision, and a framework of representation of architectural knowledge by Tzonis are used to map out the problem of heuristic biases in the human mind. These are used to discuss what aspects of knowledge can be presented explicitly and digitally to users to make rebuttal more available for human thinking at the cognitive level. The discussion is applicable to both inductive and analytic digital knowledge systems that use precedent knowledge. This discussion is targeted directly at means of addressing bias in the human mind using digital means. The problem of human bias in machine learning and generalisation are discussed in a different paper, and the problems of international or non-intentional machine bias are not part of discussion in this paper.
keywords	analogy, bias, design thinking, environmental design, heuristics
series	CAAD Futures
last changed	2003/11/22 07:26

_id	48a2
authors	Bergstrom, Axel Lennart
year	1982
title	Computer Graphics in Community Planning
source	June, 1982. 3 p
summary	The digitized map of Sweden uses a technique for graphical presentation in color based on an automatic drawing machine called the 'color ink jet plotter.' A short description of this project is given
keywords	mapping, computer graphics
series	CADline
last changed	1999/02/12 15:07

_id	6094
authors	Blinn, J.I.
year	1982
title	A Generalization of Algebraic Surface Drawing
source	ACM Transaction on Graphics, vol. 1, no. 3, pp. 235-256, 1982
summary	The technology of creating realistic and visually interesting images of three- dimensional shapes is advancing on many fronts. One such front is the develop- ment of algorithms for drawing curved surfaces directly from their mathematical definitions rather than by dividing them into large numbers of polygons. Two classes of surfaces which have received attention are the quadric and the bivariate parametric surfaces. Bivariate parametric surfaces are generated by three func- tions of two variables (most popularly polynomials), as the variables take on different values. Algorithms dealing with such surfaces are due to Catmull; Lane, Carpenter, Whitted and Blinn; and Clark.
series	journal paper
last changed	2003/11/21 15:16

_id	cc3e
authors	Bloom, Gregory L.
year	1982
title	Solving Architectural and Engineering Problems with CADD: Some Guidelines in Choosing the Right System
source	computer Graphics News. September/October 1982. [3] p
summary	To be useful, a CAD system intended for architectural engineering work must have a number of characteristics in addition to appropriate hardware or software. The article discusses some of these guidelines
keywords	CAD, engineering, architecture, practice
series	CADline
last changed	2003/06/02 13:58

_id	eabb
authors	Boeykens, St. Geebelen, B. and Neuckermans, H.
year	2002
title	Design phase transitions in object-oriented modeling of architecture
doi	https://doi.org/10.52842/conf.ecaade.2002.310
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 310-313
summary	The project IDEA+ aims to develop an “Integrated Design Environment for Architecture”. Its goal is providing a tool for the designer-architect that can be of assistance in the early-design phases. It should provide the possibility to perform tests (like heat or cost calculations) and simple simulations in the different (early) design phases, without the need for a fully detailed design or remodeling in a different application. The test for daylighting is already in development (Geebelen, to be published). The conceptual foundation for this design environment has been laid out in a scheme in which different design phases and scales are defined, together with appropriate tests at the different levels (Neuckermans, 1992). It is a translation of the “designerly” way of thinking of the architect (Cross, 1982). This conceptual model has been translated into a “Core Object Model” (Hendricx, 2000), which defines a structured object model to describe the necessary building model. These developments form the theoretical basis for the implementation of IDEA+ (both the data structure & prototype software), which is currently in progress. The research project addresses some issues, which are at the forefront of the architect’s interest while designing with CAAD. These are treated from the point of view of a practicing architect.
series	eCAADe
email
last changed	2022/06/07 07:52

For more results click below: