Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 55

Reformat results as: short short into frame detailed detailed into frame

_id	1b10
id	1b10
authors	Bay, Joo-Hwa
year	2001
title	Cognitive Biases - The case of tropical architecture
source	Delft University of Technology
summary	This dissertation investigates, i) How cognitive biases (or illusions) may lead to errors in design thinking, ii) Why architects use architectural precedents as heuristics despite such possible errors, and iii) Develops a design tool that can overcome this type of errors through the introduction of a rebuttal mechanism. The mechanism controls biases and improves accuracy in architectural thinking. // The research method applied is interdisciplinary. It employs knowledge from cognitive science, environmental engineering, and architectural theory. The case study approach is also used. The investigation is made in the case of tropical architecture. The investigation of architectural biases draws from work by A. Tversky and D. Kahneman in 1982 on “Heuristics and biases”. According to Tversky and Kahneman, the use of heuristics of representativeness (based on similarity) and availability (based on ease of recall and imaginability) for judgement of probability can result in cognitive biases of illusions of validity and biases due to imaginability respectively. This theory can be used analogically to understand how errors arise in the judgement of environmental behaviour anticipated from various spatial configurations, leading to designs with dysfunctional performances when built. Incomplete information, limited time, and human mental resources make design thinking in practice difficult and impossible to solve. It is not possible to analyse all possible alternative solutions, multiple contingencies, and multiple conflicting demands, as doing so will lead to combinatorial explosion. One of the ways to cope with the difficult design problem is to use precedents as heuristic devices, as shortcuts in design thinking, and at the risk of errors. This is done with analogical, pre-parametric, and qualitative means of thinking, without quantitative calculations. Heuristics can be efficient and reasonably effective, but may not always be good enough or even correct, because they can have associated cognitive biases that lead to errors. Several debiasing strategies are discussed, and one possibility is to introduce a rebuttal mechanism to refocus the designer’s thinking on the negative and opposite outcomes in his judgements, in order to debias these illusions. The research is carried out within the framework of design theory developed by the Design Knowledge System Research Centre, TUDelft. This strategy is tested with an experiment. The results show that the introduction of a rebuttal mechanism can debias and improve design judgements substantially in environmental control. The tool developed has possible applications in design practice and education, and in particular, in the designing of sustainable environments.
keywords	Design bias; Design knowledge; Design rebuttal; Design Precedent; Pre-parametric design; Tropical architecture; Sustainability
series	thesis:PhD
type	normal paper
email
last changed	2006/05/28 07:42

_id	cf2011_p027
id	cf2011_p027
authors	Herssens, Jasmien; Heylighen Ann
year	2011
title	A Framework of Haptic Design Parameters for Architects: Sensory Paradox Between Content and Representation
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 685-700.
summary	Architects‚Äîlike other designers‚Äîtend to think, know and work in a visual way. In design research, this way of knowing and working is highly valued as paramount to design expertise (Cross 1982, 2006). In case of architecture, however, it is not only a particular strength, but may as well be regarded as a serious weakness. The absence of non-visual features in traditional architectural spatial representations indicates how these are disregarded as important elements in conceiving space (Dischinger 2006). This bias towards vision, and the suppression of other senses‚Äîin the way architecture is conceived, taught and critiqued‚Äîresults in a disappearance of sensory qualities (Pallasmaa 2005). Nevertheless, if architects design with more attention to non visual senses, they are able to contribute to more inclusive environments. Indeed if an environment offers a range of sensory triggers, people with different sensory capacities are able to navigate and enjoy it. Rather than implementing as many sensory triggers as possible, the intention is to make buildings and spaces accessible and enjoyable for more people, in line with the objective of inclusive design (Clarkson et al. 2007), also called Design for All or Universal Design (Ostroff 2001). Within this overall objective, the aim of our study is to develop haptic design parameters that support architects during design in paying more attention to the role of haptics, i.e. the sense of touch, in the built environment by informing them about the haptic implications of their design decisions. In the context of our study, haptic design parameters are defined as variables that can be decided upon by designers throughout the design process, and the value of which determines the haptic characteristics of the resulting design. These characteristics are based on the expertise of people who are congenitally blind, as they are more attentive to non visual information, and of professional caregivers working with them. The parameters do not intend to be prescriptive, nor to impose a particular method. Instead they seek to facilitate a more inclusive design attitude by informing designers and helping them to think differently. As the insights from the empirical studies with people born blind and caregivers have been reported elsewhere (Authors 2010), this paper starts by outlining the haptic design parameters resulting from them. Following the classification of haptics into active, dynamic and passive touch, the built environment unfolds into surfaces that can act as ‚Äúmovement‚Äù, ‚Äúguiding‚Äù and/or ‚Äúrest‚Äù plane. Furthermore design techniques are suggested to check the haptic qualities during the design process. Subsequently, the paper reports on a focus group interview/workshop with professional architects to assess the usability of the haptic design parameters for design practice. The architects were then asked to try out the parameters in the context of a concrete design project. The reactions suggest that the participating architects immediately picked up the underlying idea of the parameters, and recognized their relevance in relation to the design project at stake, but that their representation confronts us with a sensory paradox: although the parameters question the impact of the visual in architectural design, they are meant to be used by designers, who are used to think, know and work in a visual way.
keywords	blindness, design parameters, haptics, inclusive design, vision
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	e5d0
authors	Lowe, John P.
year	1994
title	Computer-Aided-Design in the Studio Setting: A Paradigm Shift in Architectural Education
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 230
doi	https://doi.org/10.52842/conf.ecaade.1994.x.g6j
summary	The introduction of the personal computer in 1982 set forth a revolution that will continue to transform the profession of Architecture. Most architectural practices in America have embraced this revolution realizing the potentials of the computer. However, education seems to have been slower accepting the potentials and challenges of computers. Computer technology will change the design studio setting and therefore the fundamental way architects are educated. The Department of Architecture at Kansas State University has made a commitment to move toward a computer based design studio. In the fall of 1990, discussions began among the faculty to search for the placement of a computer studio within the five year program. Curriculum, staffing, and funding were issues that had to be overcome to make this commitment work. The strategy that was adopted involved placing the computer studio at the fourth year level in phase one. Phase two will progress as more staff are trained on the computer and course work was adapted to accommodate other year levels for a computer based design studios. Funding was a major obstacle. The decision was made to move from a position of being the primary suppliers of computing technology to one of support for student purchased computers. This strategy alleviated the department from maintaining and upgrading the technology. There was great enthusiasm and support from the faculty as a whole for the use of computers in the studio setting. However, the pedagogical impacts of such a change are just beginning to be realized.
series	eCAADe
last changed	2022/06/07 07:50

_id	4b04
authors	De Wilde, W.P., Mollaert, M. and Buelinckx, H. (Ed.)
year	1983
title	Proceedings of the International Conference eCAADe 1983
source	Proceedings of the International Conference eCAADe [European Computer Aided Architectural Design Education] Brussels (Belgium) 1983
doi	https://doi.org/10.52842/conf.ecaade.1983
summary	In the beginning of the eighties, a few enthusiastic researchers, under the impulsion of Tom MAVER (director of the ABACUS group) and Rik SCHIJF (TH Delft) initiated a regular, if not formal, convention of people involved in the teaching of computer aided architectural design ECAADE in Europe. In 1982 a first meeting took place in Delft and, taking into consideration the member of attendants and the enthusiasm during this convention, it was decided that CAAD was definitely an important topic and that a more formal symposium was to be organised in the fall of 1983, in the University of Brussels. The positive evolution of CAAD, not only in educational institutions, but also in professional practice is not surprising: it is to be considered in the global frame of technological and organisational revolution actually taking place. As will be read in the outstanding contribution of the participants it is not a mere choice of increased productivity which attracts the architects; the CAAD techniques also release then from a serious burden : the production of technical drawings and administrative paperwork!
series	eCAADe
email
more	http://wwwtw.vub.ac.be/ond/memc/Staff/Patrick.htm
last changed	2022/06/07 07:49

_id	46b0
authors	Schijf, Rik
year	1986
title	CAD in the Netherlands: Integrated CAD
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 176-184
summary	One of the things in which a small country can excel is its number of architects' offices per inhabitant. In the Netherlands this is approximately one in 6500, or twice the UK density (CBS, 1984; CICA, 1982). Of the 2150 Dutch offices, 88 per cent employ less than 10 people, which compares rather well with the British Situation. For the Netherlands it is interesting that its boom in CAD, on average an annual doubling or tripling for the next few years, is likely to coincide with a revolution in CAD itself. There is no doubt that very soon the personal and larger CAD systems will clash at supermicro-level.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	843d
authors	Avron, Barr and Feigenbaum, Edward A. (editors)
year	1982
title	The Handbook of Artificial Intelligence
source	xiii, 428 p. Stanford, California: Heuristech Press, 1982. vol. 2 of 3: Includes bibliography p.383-402 and indexes
summary	Part 2 of a three vol. work. This vol covers: AI programming languages, the kinds of programming languages suitable for AI, features and environments developed that were developed for its purpose. Expert systems in science, medicine and education. The last chapters reviews automatic programming
keywords	AI, programming, languages, expert systems, automation
series	CADline
last changed	2003/06/02 13:58

_id	cc3e
authors	Bloom, Gregory L.
year	1982
title	Solving Architectural and Engineering Problems with CADD: Some Guidelines in Choosing the Right System
source	computer Graphics News. September/October 1982. [3] p
summary	To be useful, a CAD system intended for architectural engineering work must have a number of characteristics in addition to appropriate hardware or software. The article discusses some of these guidelines
keywords	CAD, engineering, architecture, practice
series	CADline
last changed	2003/06/02 13:58

_id	09f3
authors	Burt, Michael, Kent, Eli and Ne'eman, Eliyahu (et al)
year	1982
title	Single- and Multilayer Large-Span Membrane Structures for Daylight, Energy Control, and Savings
source	1982? PP. 177-183 : ill. includes bibliography
summary	This paper examines membrane-covered structures. Such structures offer many advantages and their cost of construction is lower than that of equivalent alternatives. However, these thin, single-layer membrane covers cannot provide the control of daylight and heat required to make them environmentally satisfactory and energy-efficient. To improve the performance of membrane covers, a new solution has been studied. Double-layer membranes can be built without severe technical difficulties and provide a much higher degree of static and dynamic control. Further work is being carried out to study the option of incorporating into the two layer membrane structures solar collectors between the layers, thus converting the large area of the membrane cover into an active solar system
keywords	lighting, energy, analysis, topology, structures, building
series	CADline
last changed	2003/06/02 10:24

_id	maver_109
id	maver_109
authors	Maver, T.W. and Schijf R.
year	1982
title	International Implementation of a CAAD Project
summary	With funding from the European Cultural Committee, work is in hand to develop a modular course structure which will promote CAAD education in Schools of Architecture throughout Europe. The paper identifies the need for the course structure and describes the pilot work jointly carried out by the University of Strathclyded the Technical University of Delft. The course structure proposed in the paper will be the focus of discussion and elaboration at a meeting of European Schools of Architecture scheduled for October 1982, in Delft.
series	other
email
last changed	2003/09/03 15:36

_id	2f43
authors	Maver, T.W. and Schijf, R.
year	1982
title	International Implementation of a CAAD Project in Schools of Architecture
source	October, 1982. [14] p. : ill. includes bibliography
summary	With funding from the European Cultural Committee, work is in hand to develop a modular course structure which will promote CAAD education in Schools of Architecture throughout Europe. The paper identifies the need for the course structure and describes the pilot work jointly carried out by the University of Strathclyde and the Technical University of Delft. The course structure proposed in the paper will be the focus of discussion and elaboration at the meeting of European Schools of Architecture
keywords	CAD, architecture, education
series	CADline
email
last changed	2003/06/02 13:58

_id	611a
authors	Newell, Allen
year	1982
title	The Knowledge Level
source	[2]. 46 p. : ill. Design Research Center, CMU, April, 1982. DRC-15-15-82. includes bibliography
summary	As the first AAAI Presidential Address, this paper focuses on a basic substantive problem: the nature of knowledge and representation. There are ample indications that artificial intelligence is in need of substantial work in this area, e.g., a recent SIGART special issue on Knowledge Representation edited by Ron Brachman and Brian Smith. The paper proposes a theory of the nature of knowledge, namely, that there is another computer system level immediately above the symbol (or program) level. The nature of computer system levels is reviewed, the new level proposed, and its definition is treated in detail. Knowledge itself is the processing medium at this level and the principle of rationality plays a central role. Some consequences of the existence of the knowledge level and some relations to other fields are discussed
keywords	knowledge, representation, AI
series	CADline
last changed	1999/02/12 15:09

_id	2786
authors	Woodwark, J.R.
year	1989
title	Splitting Set-Theoretic Solid Models into Connected Components
source	10 p. : ill. Winchester: IBM UK Scientific Center, IBM United Kingdom Laboratories Limited, June, 1989. IBM UKSC 210. includes bibliography In general, there is no way to tell how many pieces (connected components) a set-theoretic (CSG) solid model represents, except via conversion to a boundary model. Recent work on the elimination of redundant primitives has been linked with techniques for identifying connected components in quad-trees and oct-trees into a strategy to attack this problem. Some success has been achieved, and an experimental Prolog program, working in two dimensions, that finds connected components and determines the set-theoretic representation of each component, is reported, and further developments proposed. CSG / quadtree / octree / primitives / algorithms. 43. Woodwark, J. R. and Quinlan K. M. 'Reducing the Effect of Complexity on Volume Model Evaluation.' Computer Aided Design. April, 1982. pp. 89-95 : ill. includes bibliography.
summary	A major problem with volume modelling systems is that processing times may increase with model complexity in a worse than linear fashion. The authors have addressed this problem, for picture generation, by repeatedly dividing the space occupied by a model, and evaluating the sub-models created only when they meet a criterion of simplicity. Hidden surface elimination has been integrated with evaluation, in such a way that major portions of the model which are not visible are never evaluated. An example demonstrates a better than linear relationship between model complexity and computation time, and also shows the effect of picture complexity on the performance of the process
keywords	CAD, computational geometry, solid modeling, geometric modeling, algorithms, hidden surfaces, CSG
series	CADline
last changed	2003/06/02 13:58

_id	avocaad_2001_16
id	avocaad_2001_16
authors	Yu-Ying Chang, Yu-Tung Liu, Chien-Hui Wong
year	2001
title	Some Phenomena of Spatial Characteristics of Cyberspace
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	"Space," which has long been an important concept in architecture (Bloomer & Moore, 1977; Mitchell, 1995, 1999), has attracted interest of researchers from various academic disciplines in recent years (Agnew, 1993; Benko & Strohmayer, 1996; Chang, 1999; Foucault, 1982; Gould, 1998). Researchers from disciplines such as anthropology, geography, sociology, philosophy, and linguistics regard it as the basis of the discussion of various theories in social sciences and humanities (Chen, 1999). On the other hand, since the invention of Internet, Internet users have been experiencing a new and magic "world." According to the definitions in traditional architecture theories, "space" is generated whenever people define a finite void by some physical elements (Zevi, 1985). However, although Internet is a virtual, immense, invisible and intangible world, navigating in it, we can still sense the very presence of ourselves and others in a wonderland. This sense could be testified by our naming of Internet as Cyberspace -- an exotic kind of space. Therefore, as people nowadays rely more and more on the Internet in their daily life, and as more and more architectural scholars and designers begin to invest their efforts in the design of virtual places online (e.g., Maher, 1999; Li & Maher, 2000), we cannot help but ask whether there are indeed sensible spaces in Internet. And if yes, these spaces exist in terms of what forms and created by what ways?To join the current interdisciplinary discussion on the issue of space, and to obtain new definition as well as insightful understanding of "space", this study explores the spatial phenomena in Internet. We hope that our findings would ultimately be also useful for contemporary architectural designers and scholars in their designs in the real world.As a preliminary exploration, the main objective of this study is to discover the elements involved in the creation/construction of Internet spaces and to examine the relationship between human participants and Internet spaces. In addition, this study also attempts to investigate whether participants from different academic disciplines define or experience Internet spaces in different ways, and to find what spatial elements of Internet they emphasize the most.In order to achieve a more comprehensive understanding of the spatial phenomena in Internet and to overcome the subjectivity of the members of the research team, the research design of this study was divided into two stages. At the first stage, we conducted literature review to study existing theories of space (which are based on observations and investigations of the physical world). At the second stage of this study, we recruited 8 Internet regular users to approach this topic from different point of views, and to see whether people with different academic training would define and experience Internet spaces differently.The results of this study reveal that the relationship between human participants and Internet spaces is different from that between human participants and physical spaces. In the physical world, physical elements of space must be established first; it then begins to be regarded as a place after interaction between/among human participants or interaction between human participants and the physical environment. In contrast, in Internet, a sense of place is first created through human interactions (or activities), Internet participants then begin to sense the existence of a space. Therefore, it seems that, among the many spatial elements of Internet we found, "interaction/reciprocity" Ñ either between/among human participants or between human participants and the computer interface Ð seems to be the most crucial element.In addition, another interesting result of this study is that verbal (linguistic) elements could provoke a sense of space in a degree higher than 2D visual representation and no less than 3D visual simulations. Nevertheless, verbal and 3D visual elements seem to work in different ways in terms of cognitive behaviors: Verbal elements provoke visual imagery and other sensory perceptions by "imagining" and then excite personal experiences of space; visual elements, on the other hand, provoke and excite visual experiences of space directly by "mapping".Finally, it was found that participants with different academic training did experience and define space differently. For example, when experiencing and analyzing Internet spaces, architecture designers, the creators of the physical world, emphasize the design of circulation and orientation, while participants with linguistics training focus more on subtle language usage. Visual designers tend to analyze the graphical elements of virtual spaces based on traditional painting theories; industrial designers, on the other hand, tend to treat these spaces as industrial products, emphasizing concept of user-center and the control of the computer interface.The findings of this study seem to add new information to our understanding of virtual space. It would be interesting for future studies to investigate how this information influences architectural designers in their real-world practices in this digital age. In addition, to obtain a fuller picture of Internet space, further research is needed to study the same issue by examining more Internet participants who have no formal linguistics and graphical training.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	e5c4
authors	Johnson-Laird
year	1983
title	Mental Models
source	Cambridge, MA: Harvard University Press
summary	As psychological representations of real, hypothetical, or imaginary situations, mental models were first postulated by the Scottish psychologist Kenneth Craik (1943), who wrote that the mind constructs "small-scale models" of reality to anticipate events, to reason, and to underlie . The models are constructed in working memory as a result of perception, the comprehension of discourse, or imagination (see 1982; Johnson-Laird 1983). A crucial feature is that their structure corresponds to the structure of what they represent. Mental models are accordingly akin to architects' models of buildings and to chemists' models of complex molecules.
series	other
last changed	2003/04/23 15:50

_id	0107
authors	Akin, Omer and Weinel, Eleanor F. (editors)
year	1982
title	Representation and Architecture
source	v, 285 p. : ill. Silver Spring, Maryland: Information Dynamics, Inc., 1982
summary	A collection of papers developed from the proceeding of the Northeastern Regional meeting of the Association of Collegiate Schools of Architecture (ACSA), held at the Department of Architecture, Carnegie Mellon University. The introduction includes articles about representation, representation and architecture. Part 1, Who/To Whom speaks about representation and participatory design process, and of a system for recording behavior and occupying of design. Part 2, How: includes Figure, System and Memory, the Process of Design ; Representation and Creativity in Architecture and Miniature Substitutes. Part 3, With What :Information and Data Base in Design : the Computer as a Design Medium, Slides Talk and Translation
keywords	design process, representation, architecture, creativity
series	CADline
email
last changed	2003/05/17 10:09

_id	8a88
authors	Anderson, David P.
year	1982
title	Hidden Line Elimination in Projected Grid Surfaces
source	ACM Transactions on Graphics. October, 1982. vol. 1: pp. 274-288 : ill. includes a short bibliography
summary	The hidden line and hidden surface problems are simpler when restricted to special classes of objects. An example is the class of grid surfaces, that is, graphs of bivariate functions represented by their values on a set of grid points. Projected grid surfaces have geometric properties which permit hidden line or hidden surface elimination to be done more easily than in the general case. These properties are discussed in this paper, and an algorithm is given which exploits them
keywords	algorithms, hidden lines, hidden surfaces, grids, computer graphics
series	CADline
last changed	2003/06/02 10:24

_id	a426
authors	Barsky, Brian A. and Greenberg, Donald P.
year	1982
title	Interactive Surface Representation System Using a B-spline Formulation with Interpolation Capability
source	computer Aided Design. July, 1982. vol. 14: pp. 187-194 : col.ill. includes bibliography
summary	An interactive surface representation system is described which uses a parametric uniform bicubic B-spline formulation which can describe a surface initially defined to interpolate a specified network of points
keywords	CAD, curved surfaces, computational geometry, interpolation, B-splines
series	CADline
last changed	2003/06/02 13:58

_id	898a
authors	Bay, J.H.
year	2002
title	Cognitive Biases and Precedent Knowledge in Human and Computer-Aided Design Thinking
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 213-220
doi	https://doi.org/10.52842/conf.caadria.2002.213
summary	Cognitive biases (illusions) and potential errors can occur when using precedent knowledge for analogical, pre-parametric and qualitative design thinking. This paper refers largely to part of a completed research (Bay 2001) on how heuristic biases, discussed by Tversky and Kahneman (1982) in cognitive psychology, can affect judgement and learning of facts from precedents in architectural design, made explicit using a kernel of conceptual system (Tzonis et. al., 1978) and a framework of architectural representation (Tzonis 1992). These are used here to consider how such illusions and errors may be transferred to computer aided design thinking.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	cf2003_m_040
id	cf2003_m_040
authors	BAY, Joo-Hwa
year	2003
title	Making Rebuttals Available Digitally for Minimising Biases in Mental Judgements
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 147-156
summary	The problem of heuristic biases (illusions) discussed by Tversky and Kahneman (1982) that can lead to errors in judgement by human designers, when they use precedent knowledge presented graphically (Bay 2001). A Cognitive framework of belief, goal, and decision, and a framework of representation of architectural knowledge by Tzonis are used to map out the problem of heuristic biases in the human mind. These are used to discuss what aspects of knowledge can be presented explicitly and digitally to users to make rebuttal more available for human thinking at the cognitive level. The discussion is applicable to both inductive and analytic digital knowledge systems that use precedent knowledge. This discussion is targeted directly at means of addressing bias in the human mind using digital means. The problem of human bias in machine learning and generalisation are discussed in a different paper, and the problems of international or non-intentional machine bias are not part of discussion in this paper.
keywords	analogy, bias, design thinking, environmental design, heuristics
series	CAAD Futures
last changed	2003/11/22 07:26

_id	6094
authors	Blinn, J.I.
year	1982
title	A Generalization of Algebraic Surface Drawing
source	ACM Transaction on Graphics, vol. 1, no. 3, pp. 235-256, 1982
summary	The technology of creating realistic and visually interesting images of three- dimensional shapes is advancing on many fronts. One such front is the develop- ment of algorithms for drawing curved surfaces directly from their mathematical definitions rather than by dividing them into large numbers of polygons. Two classes of surfaces which have received attention are the quadric and the bivariate parametric surfaces. Bivariate parametric surfaces are generated by three func- tions of two variables (most popularly polynomials), as the variables take on different values. Algorithms dealing with such surfaces are due to Catmull; Lane, Carpenter, Whitted and Blinn; and Clark.
series	journal paper
last changed	2003/11/21 15:16

For more results click below: